TopSeed Technology TSGD-2401 WIRELESS AUDIO TRANSMITTER User Manual TSGD C FX 2401 Manual
TopSeed Technology Corp. WIRELESS AUDIO TRANSMITTER TSGD C FX 2401 Manual
users manual
![](/img.php?id=740955&img=bg1.png)
0
Wireless Music Station for PC and Mac User Manual
(2.4GHZ Transmitter & Reviever)
1
Warning Statement…………....... 2 , 3
Product Ovreview………............. 4
How to use the Wireless Music… 5
Certification…………………….. 11
![](/img.php?id=740955&img=bg3.png)
2
Warning Statement
FCC Guidelines
15.105 Federal Communications commission (FCC) Requirements, Part 15
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
---Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
15.21
CAUTION: any changes or modifications not expressly approved by the party responsible for
compliance could void the user’ s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired o
p
eration.
Caution Statement of the FCC Radio Frequency Exposure
This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found
compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and
15.247(b)(4) addressing RF Exposure from radio frequency devices. The radiation output
power of this Wireless LAN device is far below the FCC radio frequency exposure limits.
Nevertheless, this device shall be used in such a manner that the potential for human contact
during normal operation—as a mobile or portable device but use in a body-worn way is strictly
prohibit. When using this device, a certain separation distance between antenna and nearby
persons has to be kept to ensure RF exposure compliance.
![](/img.php?id=740955&img=bg4.png)
3
Declaration of Conformity for R&TTE directive 1999/5/EC
Protection requirements for electromagnetic compatibility – Article 3.1b
Testing for electromagnetic compatibility according to EN 301 489-1, EN 301 489-3 has been
conducted. These are considered relevant and sufficient.
Effective use of the radio spectrum – Article 3.2
Testing for radio test suites according to EN 300 440-2 has been conducted. These are considered
relevant and sufficient.
Hereby, [Dong Guan Jess-Link Electronics Co., Ltd.], declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Essential requirements – Article 3
Protection requirements for health and safety – Article 3.1a
Testing for electric safety according to EN 60950-1 has been conducted. These are considered
relevant and sufficient.
ࠠԄᇡӝϐեфᓎႝᐒǴߚёǴϦљǵဦ܈٬Ҕޣ֡όளᏰԾᡂ׳ᓎ
ǵуεф܈ᡂ׳চीϐ܄ϷфૈǶ
! ! եфᓎႝᐒϐ٬Ҕόளቹៜ०ૐӼӄϷυᘋӝݤ೯ߞǹวԖυᘋຝਔǴᔈҥ
ջଶҔǴ٠ׯ๓ԿคυᘋਔБளᝩុ٬ҔǶ
! ! ӝݤ೯ߞǴࡰ٩ႝߞݤೕۓբϐคጕႝ೯ߞǶ
! ! եфᓎႝᐒהڙӝݤ೯ߞ܈πǵࣽᏢϷᙴᕍҔႝݢᒟ܄ႝᐒഢϐυᘋǶ
![](/img.php?id=740955&img=bg5.png)
4
Product Overview
(A) USB Transmit Dongle
(B) Music Receive Box
(C) Power Adapter
(D) 3.5mm Phone Plug to RCA Cable
(E) USB Cable for Charging
(F) 3.5mm Phone Plug to
3.5mm Phone Plug Cable
(G) User Manual
Ϥ
A
Ϥ
B
Ϥ
C
Ϥ
D
Ϥ
G
Ϥ
F
Ϥ
E
![](/img.php?id=740955&img=bg6.png)
5
How to use the Wireless Music:
1. Connect the USB Transmit Dongle into a USB Port on your PC or Mac.
2. Connect the Music Receive Box to your speaker system
For home stereo / home theater systems
1) Take Phone Plug to RCA Cable (D) and plug the end of 3.5mm
phone plug into the jack on the Music Receive Box where it shows
LINE OUT.
2) Plug the other end into an “aux input” or “line-in” jack on your
home stereo.
3) Take USB Cable (E) and plug mini USB head into the Music
Receiver Box, and plug the other end into Power Adapter (C)
ቹ1
ቹ2, GD
༺ԵோՂীሽᆰ
ቹ1, FX ༺Ղଃ
ቹ2, FX ༺Ղሽᄭ
![](/img.php?id=740955&img=bg7.png)
6
OR For powered multimedia speakers
1) Plug the 3.5mm Phone plug cable from the speakers into the
Music Receive Box.
2) Take USB Cable (E) and plug mini USB head into the Music
Receiver Box, and plug the other end into Power Adapter (C)
3. Press Play and Listen to Music
1) Please make sure if the USB Speaker setting as the Audio Default
Device.
For PC (Windows XP):
Æ Click and Open the Start Manual
Æ Click and Enter Control Panel
ቹ1, FX ༺Ղଃ
ቹ2, FX ༺Ղሽᄭ
![](/img.php?id=740955&img=bg8.png)
7
Æ Click and Enter Sounds and Audio Devices
Æ Click the Audio column
Æ Check whether the USB Speaker sets as the Audio Default
Device. If not, please change the default device to USB Speaker.
For Mac (Version 10 and above)
Æ Click and Enter System Preferences under START
![](/img.php?id=740955&img=bg9.png)
8
Æ Click and Enter Sound under Hardware section
Æ Check whether the USB Speaker sets as the sound output
default device. If not, please change the default device to USB
Speaker.
2) On your PC or Mac, open a playlist in your favorite media player
and press play.
3) Enjoy the music!!
![](/img.php?id=740955&img=bga.png)
9
4. Connect the Line IN device (mp3 player, CD player, or iPod) to the
Music Receive Box and listen it with your speaker system
1) Make sure you run Step 1 to Step 3.
2) Take 3.5mm Phone Plug to 3.5mm Phone Plug Cable (H) and
plug the end of 3.5mm phone plug into the jack on the Music
Receive Box where it shows LINE IN.
3) Plug the other end to your Line IN device.
4) On your Line IN device, press play and enjoy the music!!
*Warning: Music from USB Transmit Dongle is set as priority.
Whenever the Music Receive Box is linking with USB Transmit
Dongle, music from Line IN device will be cutoff automatically.
5. Product Operation
Music Receive Box
Function Instruction LED State
Power On 1) plug in power adapter
2) install the AA batteries
Solid Green (disconnecting with
USB Transmit Dongle or
connecting with Line IN Device)
Link Connected
with USB
Transmit Dongle
Follow Step 1 to Step 3 Blinking Green
Manually Power
Switch
Push and Hold power
button for 2 seconds
Green on when power on
Green off when power off
Manually Music
Output Switch
Push power button to
switch music in-between
Music Receive Box Line
IN Device
Solid Green (connecting with
Line IN Device)
Blinking Green (connecting
with Music Receive Box)
Low Battery
Power Detector
When battery power is
lower than 2.4V
Blinking Red flashes once in
every 2 seconds
USB Transmit Dongle
Function Instruction LED State
Power On Plug dongle to USB port Solid Blue
Link Connected Follow Step 1 to Step 3 Blinking Blue
![](/img.php?id=740955&img=bgb.png)
10
with Music
Receive Box
6. Troubleshooting
Q) The Music Receive Box or USB Transmit Dongle will not turn on.
A-1) Make sure the USB Transmit Dongle is completely plugged into the
USB port. If you are using the desktop stand, make sure that the
stand’s USB cable is completely plugged in as well.
A-2) Make sure that the power adapter and USB cable is plugged into
the back of the Music Receive Box.
A-3) If the Music Receive Box and USB Transmit Dongle still will not turn
on, unplug and re-plug it back in.
Q) The Music Receive Box and USB Transmit Dongle are on, but will not
connect to each other.
A-1) Make sure the LED is blinking Green on Music Receive Box and
blinking Blue on USB Transmit Dongle.
A-2) Unplug and re-plug the USB Transmit Dongle to USB port
Q) The Music Receive Box and USB Transmit Dongle are connected, but
no music is coming through the speakers.
A-1) Make sure the media player on your PC is actively playing music.
A-2) Your PC or Mac has several different volume controls. Check the
followings:
For PC
a. Go to the Control Panel. Select “Sounds and Audio Devices”. On
the “Volume” tab, select “Advanced”. Make sure that the “Wave”
level is all the way up.
b. On the same page, make sure that the system volume (labeled
“Volume Control”) is at least half-way up.
For Mac
a. Go to the System Preferences. Select “Sounds” in Hardware
section. On the “Output volume”, make sure that the “Wave” level
is all the way up.
A-3) Many media players also have their own volume control within the
player. Make sure that the media player’s volume level is at least
half-way up.
A-4) Make sure the volume level on your speakers (or your home stereo)
is at least half-way up.
![](/img.php?id=740955&img=bgc.png)
11
Q) I press play in my media player, but the music is still coming out of my
PC speakers.
A) Make sure you run the Step 3-1 above by setting USB Speaker as the
Audio Default Device
Certification:
1) FCC:
TSGD-2401, TSGC-2401 FCC ID: PTITSGD -2401
TSFX-2401 FCC ID : PTITSFX-2401
2) CE:
!