Top Victory Electronics WPCWATXMPA5 LCD MONITOR (with Wireless Qi Charger 15W) User Manual

Top Victory Electronics (Taiwan) Co Ltd LCD MONITOR (with Wireless Qi Charger 15W)

User Manual

MX38VC SeriesLCD MonitorUser Guide
iiCopyright © 2017 ASUSTeK COMPUTER INC. All Rights Reserved.No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.Table of contentsNotices ......................................................................................................... iiiSafety information ...................................................................................... ivCare & Cleaning .......................................................................................... vi1.1 Welcome! ...................................................................................... 1-11.2 Package contents ......................................................................... 1-11.3 Disassembling the IO cover ........................................................ 1-21.4 Connect cables ............................................................................. 1-31.4.1 Rear of the LCD monitor ................................................. 1-31.5 Monitor introduction .................................................................... 1-41.5.1 Using the Controls button .............................................. 1-42.1 Base Control ................................................................... 2-13.1 OSD (On-Screen Display) menu ................................................. 3-13.1.1 Howtoreconfigur .......................................................... 3-13.1.2 OSD Function Introduction .............................................. 3-23.2 Specification ............................................................................. 3-103.3 Troubleshooting (FAQ) .............................................................. 3-113.4 Supported Timing List ............................................................... 3-12
LLLNotices)HGHUDO&RPPXQLFDWLRQV&RPPLVVLRQ6WDWHPHQW7KLVGHYLFHFRPSOLHVZLWK3DUWRIWKH)&&5XOHV2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQVŖ7KLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFHDQGŖ7KLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQ7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKWKHOLPLWVIRUD&ODVV%GLJLWDOGHYLFHSXUVXDQWWR3DUWRIWKH)&&5XOHV7KHVHOLPLWVDUHGHVLJQHGWRSURYLGHUHDVRQDEOHSURWHFWLRQDJDLQVWKDUPIXOLQWHUIHUHQFHLQDUHVLGHQWLDOLQVWDOODWLRQ7KLVHTXLSPHQWJHQHUDWHVXVHVDQGFDQUDGLDWHUDGLRIUHTXHQF\HQHUJ\DQGLIQRWLQVWDOOHGDQGXVHGLQDFFRUGDQFHZLWKPDQXIDFWXUHU¶VLQVWUXFWLRQVPD\FDXVHKDUPIXOLQWHUIHUHQFHWRUDGLRFRPPXQLFDWLRQV+RZHYHUWKHUHLVQRJXDUDQWHHWKDWLQWHUIHUHQFHZLOOQRWRFFXULQDSDUWLFXODULQVWDOODWLRQ,IWKLVHTXLSPHQWGRHVFDXVHKDUPIXOLQWHUIHUHQFHWRUDGLRRUWHOHYLVLRQUHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRIIDQGRQWKHXVHULVHQFRXUDJHGWRWU\WRFRUUHFWWKHLQWHUIHUHQFHE\RQHRUPRUHRIWKHIROORZLQJPHDVXUHVŖ5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQDŖ,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHUŖ&RQQHFWWKHHTXLSPHQWWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWWRZKLFKWKHUHFHLYHULVFRQQHFWHGŖ&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS&DQDGLDQ'HSDUWPHQWRI&RPPXQLFDWLRQV6WDWHPHQW7KLVGLJLWDODSSDUDWXVGRHVQRWH[FHHGWKH&ODVV%OLPLWVIRUUDGLRQRLVHHPLVVLRQVIURPGLJLWDODSSDUDWXVVHWRXWLQWKH5DGLR,QWHUIHUHQFH5HJXODWLRQVRIWKH&DQDGLDQ'HSDUWPHQWRI&RPPXQLFDWLRQV7KLVFODVV%GLJLWDODSSDUDWXVFRPSOLHVZLWK&DQDGLDQ,&(6)&&&DXWLRQ$Q\FKDQJHVRUPRGLILFDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFHFRXOGYRLGWKHXVHUVDXWKRULW\WRRSHUDWHWKLVHTXLSPHQW7KLVWUDQVPLWWHUPXVWQRWEHFRORFDWHGRURSHUDWLQJLQFRQMXQFWLRQZLWKDQ\RWKHUDQWHQQDRUWUDQVPLWWHU
LY,QGXVWU\&DQDGDVWDWHPHQW7KLVGHYLFHFRPSOLHVZLWK,6('¶VOLFHQFHH[HPSW566V2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQV7KLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFHDQGWKLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQ/HSUpVHQWDSSDUHLOHVWFRQIRUPHDX[&15G¶,6('DSSOLFDEOHVDX[DSSDUHLOVUDGLRH[HPSWVGHOLFHQFH/¶H[SORLWDWLRQHVWDXWRULVpHDX[GHX[FRQGLWLRQVVXLYDQWHVOHGLVSRVLWLIQHGRLWSDVSURGXLUHGHEURXLOODJHSUpMXGLFLDEOHHWFHGLVSRVLWLIGRLWDFFHSWHUWRXWEURXLOODJHUHoX\FRPSULVXQEURXLOODJHVXVFHSWLEOHGHSURYRTXHUXQIRQFWLRQQHPHQWLQGpVLUDEOH5DGLDWLRQ([SRVXUH6WDWHPHQW7KLVHTXLSPHQWFRPSOLHVZLWK&(5('UDGLDWLRQH[SRVXUHOLPLWVVHWIRUWKIRUDQXQFRQWUROOHGHQYLURQPHQW7KLVHTXLSPHQWVKRXOGEHLQVWDOOHGDQGRSHUDWHGZLWKPLQLPXPGLVWDQFHFPEHWZHHQWKHUDGLDWRU\RXUERG\低低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。ɉɨɞɬɜɟɪɠɞɟɧɢɟɫɨɨɬɜɟɬɫɬɜɢɹɆɢɧɢɧɮɨɪɦɫɜɹɡɢɊɨɫɫɢɢȾɟɤɥɚɪɚɰɢɹɫɨɨɬɜɟɬɫɬɜɢɹʋȾ3'ɨɬɝɨɞɚɞɟɣɫɬɜɢɬɟɥɶɧɚɞɨɝɨɞɚɡɚɪɟɝɢɫɬɪɢɪɨɜɚɧɚɜɎɟɞɟɪɚɥɶɧɨɦɚɝɟɧɫɬɜɟɫɜɹɡɢɝɨɞɚRadiation Exposure Statement The product comply with the FCC RF Exposure for Low Power Consumer Wireless Power Transfer. RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure that compliancewas demonstrated at 15cm and greater separation from the user body or set the device to lower output power if such function is available. Radiation Exposure Statement The product comply with the IC RF Exposure for Low Power Consumer Wireless Power Transfer. RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure that compliancewas demonstrated at 10cm and greater separation from the user body or set the device to lower output power if such function is available. Déclaration d'exposition aux radiations: Le produit est conforme à l'exposition RF IC pour le transfert de puissance sans fil de consommateurs de faible puissance. La limite d'exposition RF fixée pour un environnement non contrôlé est sans danger pour le fonctionnement prévu tel que décrit dans ce manuel. L'exposition RF supplémentaire que la conformité a été démontrée à 10cm et plus de séparation du corps de l'utilisateur ou de mettre l'appareil à la puissance de sortie inférieure si une telle fonction est disponible.
v• Before setting up the monitor, carefully read all the documentation thatcame with the package.• To prevent fire or shock hazard, never expose the monitor to rain ormoisture.• Never try to open the monitor cabinet. The dangerous high voltagesinside the monitor may result in serious physical injury.• If the power supply is broken, do not try to fix it by yourself. Contact aqualified service technician or your retailer.• Before using the product, make sure all cables are correctly connectedand the power cables are not damaged. If you detect any damage,contact your dealer immediately.• Slots and openings on the back or top of the cabinet are provided forventilation. Do not block these slots. Never place this product near orover a radiator or heat source unless proper ventilation is provided.• The monitor should be operated only from the type of power sourceindicated on the label. If you are not sure of the type of power supply toyour home, consult your dealer or local power company.• Use the appropriate power plug which complies with your local powerstandard.• Do not overload power strips and extension cords. Overloading canresult in fire or electric shock.• Avoid dust, humidity, and temperature extremes. Do not place themonitor in any area where it may become wet. Place the monitor on astable surface.• Unplug the unit during a lightning storm or if it will not be used for along period of time. This will protect the monitor from damage due topower surges.• Never push objects or spill liquid of any kind into the slots on themonitor cabinet.• To ensure satisfactory operation, use the monitor only with UL listedcomputers which have appropriate configured receptacles markedbetween 100 ~ 240V AC.• The socket-outlet shall be installed near the equipment and shall beeasily accessible• If you encounter technical problems with the monitor, contact aqualified service technician or your retailer.• Provide an earthing connection before the mains plug is connected tothe mains. And, when disconnecting the earthing connection, be sureto disconnect after pulling out the mains plug from the mains.• Please use ADP-230EB T of DELTA adapter.Safety informationWARNINGUsageofotherthanspeciedhead-orearphonescanresultinhearingloss due to excessive sound pressures.
viCare & Cleaning•Before you lift or reposition your monitor, it is better to disconnect thecables and power cord. Follow the correct lifting techniques whenpositioning the monitor. When lifting or carrying the monitor, grasp theedges of the monitor. Do not lift the display by the stand or the cord.•Cleaning. Turn your monitor off and unplug the power cord. Clean themonitor surface with a lint-free, non-abrasive cloth. Stubborn stainsmay be removed with a cloth dampened with mild cleaner.•Avoid using a cleaner containing alcohol or acetone. Use a cleanerintended for use with the LCD. Never spray cleaner directly on thescreen, as it may drip inside the monitor and cause an electric shock.The following symptoms are normal with the monitor:•The screen may flicker during the initial use due to the nature of thefluorescent light. Turn off the Power Switch and turn it on again tomake sure that the flicker disappears.•You may find slightly uneven brightness on the screen depending onthe desktop pattern you use.•When the same image is displayed for hours, an afterimage of theprevious screen may remain after switching the image. The screen willrecover slowly or you can turn off the Power Switch for hours.•When the screen becomes black or flashes, or cannot work anymore,contact your dealer or service center to fix it. Do not repair the screenby yourself!Conventions used in this guideWARNING: Information to prevent injury to yourself when trying to complete a task.CAUTION: Information to prevent damage to the components when trying to complete a task.IMPORTANT: Information that you MUST follow to complete a task.NOTE: Tips and additional information to aid in completing a task.
viiWheretofin moreinformationRefer to the following sources for additional information and for product and software updates.1. ASUS websitesThe ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com2. Optional documentationYour product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
1-1ASUS LCD Monitor MX38VC Series1.1 Welcome!Thank you for purchasing the ASUS® LCD monitor!The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience.With these features, you can enjoy the convenience and delightful visual experience that the monitor brings you!1.2 Package contentsCheck your package for the following items:LCD MonitorQuick Start GuideWarranty Card1x Power Cord1x Adapter 1x DisplayPort Cable1x HDMI Cable1x Audio Cable1 x USB Type-C Cable1 x USB Type-C to A adapter•If any of the above items is damaged or missing, contact your retailerimmediately.
1-2Chapter 1: Product Introduction1.3 Disassembling the IO cover-5°~15°31122
1-3ASUS LCD Monitor MX38VC Series1.4 Connect cables1.4.1 Rear of the LCD monitor1102 3 4 5 6 7 8 9HDMI-2 HDMI-11. DC-IN Port2. HDMI-2 Port3. HDMI-1 Port4. DisplayPort5. USB Type-C Port6. USB fast charge Port7. USB fast charge Port8. Audio in Port9. Earphone - out Port10. Kensington Lock
1-4Chapter 1: Product Introduction1.5 Monitor introduction1.5.1 Using the Controls button Use the control button on the bottle of the monitor to adjust the image settings.Input SelectCloseMenuPower1. Power Button/Power Indicator:•Press this button to turn the monitor on/off.•The color definition of the power indicator is as the below table.Status DescriptionWhite ONAmber Standby modeOFF OFF2. (5-way) Button:•Press this button to turn the monitor on.•Turns on the OSD menu. Enacts the selected OSD menu item.•Increases/Decreases values or moves your selection up/down/left/right3. Input Select Button:•This is a hotkey. The default setting is Input Select. Use Input Selecthotkey to switch from “DisplayPort”, “HDMI-1”, “HDMI-2” or “Type-C”,Switch To DP1.1 or Switch To DP1.2 input signal.
2-1ASUS LCD Monitor MX38VC Series50Halo Brightness95
3-1ASUS LCD Monitor MX38VC Series3.1 OSD (On-Screen Display) menu3.1.1 HowtoreconfigurReading ModeDarkroom ModeSplendidStandard ModeTheater ModeGame ModeScenery ModesRGB ModeStandard Mode HDMI-1 3840x1600@60HzASUS MX38VNight View Mode1. Press the MENU button to activate the OSD menu.2. Press the  and  buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. 3. To select the highlighted item on the menu press the Center key. 4. Press the  and  buttons to select the desired parameter. 5. Press the Center key to enter the slide bar and then use the  or  buttons, according to the indicators on the menu, to make your changes. 6. Press the ◄/► to move left / right menu.
3-2Chapter 3: General Instruction3.1.2 OSD Function Introduction1. SplendidThis function contains eight sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.Reading ModeDarkroom ModeSplendidStandard ModeTheater ModeGame ModeScenery ModesRGB ModeStandard Mode HDMI-1 3840x1600@60HzASUS MX38VNight View Mode• Standard Mode: This is the best choice for document editing with SPLENDID™ Video Intelligence Technology.• sRGB Mode: This is the best choice for viewing photos and graphics from PCs.• Scenery Mode: This is the best choice for scenery photo displaying with SPLENDID™ Video Intelligence Technology.• Theater Mode: This is the best choice for movie watching with SPLENDID™ Video Intelligence Technology.• Game Mode: This is the best choice for game playing with SPLENDID™ Video Intelligence Technology.• Night View Mode: This is the best choice for playing dark-scene game or watching dark-scene movie with SPLENDID™ Video Intelligence Technology.• Reading Mode : This is the best choice for book reading.• Darkroom Mode: This is the best choice for a weak ambient light environmen.• In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR functions are not user-configurable.• In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness, Contrast and ASCR functions are not user-configurable.• In the Reading Mode, the Saturation, SkinTone, Sharpness, ASCR, contrast, and Color Temp functions are not user-configurable.
3-3ASUS LCD Monitor MX38VC Series2. Blue Light FilterAdjust the energy level of blue light emitted from LED backlight.Blue Light FilterLevel 0Level 3Level 4Level 2Level 1Standard Mode HDMI-1 3840x1600@60HzASUS MX38V• Level 0: No change.• Level 1~4: The higher the level,the more blue light will be reduced. • When Blue Light Filter is activated,the default settings of Standard Mode will be automatically imported.• Between Level 1 to Level 3, the Brightness function is user-configurable.• Level 4 is optimized setting. It is compliance with TUV Low Blue Light Certification. The Brightness function is not user-configurable.Please refer to the following to alleviate eye strains:• Users should take some time away from the display if working for long hours. It is advised to take short breaks (at least 5 mins) after around 1 hour of continuous working at the computer. Taking short and frequent breaks is more effective than a single longer break.• To minimize eye strain and dryness in your eyes, users should rest the eye periodically by focusing on objects that are far away.• Eye exercises can help to reduces eye strain. Repeat these exercises often. If eye strain continues please consult a physician. Eye exercises: (1) Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.• High energy blue light may lead to eye strain and AMD (Age-Related Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue light to avoiding CVS (Computer Vision Syndrome).
3-4Chapter 3: General Instruction3. ColorSelect the image color you like from this function.ColorBrightnessColor Temp.Skin ToneSaturationContrastStandard Mode HDMI-1 3840x1600@60HzASUS MX38V• Brightness: The adjusting range is from 0 to 100.• Contrast: The adjusting range is from 0 to 100. • Saturation: The adjusting range is from 0 to 100.• Color Temp.: Contains three preset color modes (Cool, Normal, Warm) and User Mode.• Skin Tone: Contains three color modes including Reddish, Natural, and Yellowish.• In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-configurable; the adjusting range is from 0 ~ 100.
3-5ASUS LCD Monitor MX38VC Series4. ImageYou can adjust the image Sharpness, Trace Free, Aspect Control, VividPixel, ASCR and Adaptive-Sync/FreeSync from this main function.ImageSharpnessVividPixelASCRAdaptive-Sync/FreeSyncAspect ControlTrace FreeStandard Mode HDMI-1 3840x1600@60HzASUS MX38V• Sharpness: Adjusts the picture sharpness. The adjusting range is from 0 to 100.• Trace Free: Speeds up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100.• Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”. • VividPixel: ASUS Exclusive Technology that brings lifelike visuals for crystal-clear and detail-oriented enjoyment. The adjusting range is from 0 to 100.• ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function.• Adaptive-Sync/FreeSync: It can allow a Adaptive-Sync/FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low-latency display update.• 4:3 is only available when input source is in 4:3 format.
3-6Chapter 3: General Instruction5. SoundAdjust the sound settings to your preference.SoundVolumeSourceAudioWizardMuteStandard Mode HDMI-1 3840x1600@60HzASUS MX38V• Volume: Adjusts the output volume level.• Mute: Adjust audio mute ON or OFF.• Source: Adjust audio source to “HDMI”, “Line In” or “Bluetooth”. (only available for HDMI input); Adjust audio source to “DisplayPort”, “Line In” or “Bluetooth”. (only available for DisplayPort input); Adjust audio source to “Type-C”, “Line In” or “Bluetooth”. (only available for Type-C input).• AudioWizard: Select the preset sound mode. Available options: Music Mode, Movies Mode, Game Mode and User Mode.• In the User Mode, you can adjust the equalizer settings.6. PIP/PBP SettingThe PIP/PBP Setting allows you to open up another sub-window connected from another video source besides the main-window from your original video source.PIP/PBP SettingPIP/PBP ModePIP SizePIP PositionAspect ControlSwapPIP/PBP SourceStandard Mode HDMI-1 3840x1600@60HzASUS MX38V
3-7ASUS LCD Monitor MX38VC SeriesBy activating this function, this monitor displays two pictures from two different video sources.• PIP/PBP Mode: Selects PIP or PBP function, or turn it off.• PIP/PBP Source: Selects the video input source among,“DisplayPort”, “HDMI-1”, “HDMI-2” or “Type-C”.• PIP Size: Adjust the PIP size to “Small”, “Middle”, or “Large”.• PIP Position: Adjusts the position of PIP sub-window to “Right-Top”, “Left-Top”, “Right-Bottom” or “Left-Bottom”.• Aspect Control: Adjusts the PIP aspect ratio and automatically adjust the PIP window size.• Swap: Swaps the sources of the main- and sub-windows.Main-windowSub-windowDisplayPort HDMI-1 HDMI-2 Type-CDisplayPort Yes Yes YesHDMI-1 Yes Yes YesHDMI-2 Yes Yes YesType-C Yes Yes Yes• PIP/PBP will be disabled if main source is FreeSync or sub source is FreeSync. Change those sources to non-FreeSync to enable PIP/PBP function。7. Input SelectSelect the input source from DisplayPort, HDMI-1, HDMI-2 or Type-C input signal.Input SelectDisplayPortHDMI-2Type-CHDMI-1Standard Mode HDMI-1 3840x1600@60HzASUS MX38V
3-8Chapter 3: General Instruction8. System SetupAdjuststhesystemconfigurationUSB ChargingShortcutSystem SetupSplendid Demo ModeDisplayPort StreamHalo LightingECO ModeGamePlusOnOffUSB SetupStandard Mode HDMI-1 3840x1600@60HzASUS MX38VMorePower Key LockAll ResetSystem SetupInformationLanguageOSD SetupBackPower IndicatorStandard Mode HDMI-1 3840x1600@60HzASUS MX38VKey Lock• Splendid Demo Mode: Activate the demo mode for the Splendid function.• GamePlus: The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. Particularly, Crosshair function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games.To active GamePlus:• Select ON to enter the GamePlus main menu. • Press ▲ and ▼ to select between Crosshair, Timer and FPS Counter function.• Press Center key to confirm the function you choose. Press to go back. Press to go off and exit.
3-9ASUS LCD Monitor MX38VC SeriesGamePlus main menu GamePlus-Crosshair GamePlus-TimerCrosshair(Practice Mode)TimerFPS CounterGamePlus NEXT BACK/EXITFPS• Halo Lighting: Select Halo Light Mode (Static, Breathing, Rhythm Sync and OFF) and Halo Brightness here.• DisplayPort Stream: Compatibility with graphic card. Select DP 1.1 or DP 1.2 by graphic card DP version.• ECO Mode: Activate the ecology mode for power saving.• USB Setup: Select USB Type-C with USB 2.0 or USB 3.1. USB 2.0 is up to 3840x1600-75Hz. USB 3.1 is up to 3840x1600-30Hz.• USB Charging: Turn On/Off USB charging function during the standby mode.• Shortcut: Selecting this option allows you to set shortcut key.• More: Return the next page of System Setting.• Back: Return the previous page of System Setting.• OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of the OSD screen.• Language: Select OSD language. The selections are: English, French, German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croatia, Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai and Indonesian.• Key Lock: Disable all key functions. Pressing the down key for more than five seconds to disable key lock function. • Information: Displays the monitor information.• Power Indicator: Turn the power LED indicator on/off.• Power Key Lock: To disable / enable power key.• All Reset: Selects “Yes” to revert all settings to the factory default mode.
3-10Chapter 3: General Instruction3.2 SpecicationsModel MX38VCPanel Size 37.5”W (95.29 cm)Max. Resolution 3840x1600@60Hz Brightness (Typ.) 300cd/m2Intrinsic Contrast Ratio (Typ.) 1000:1Viewing Angle (CR=10) 178°(V) /178°(H)Display Colors 1.07 B(8bit+A-FRC)Response Time 5ms (Gray to Gray)Satellite Speaker 13W x 2 stereoEarphone OutputYesSound from Bluetooth YesSound from HDMI YesHDMI input YesDisplayPort input YesUSB Type-CTM Input YesPower ON Consumption(Max.) < TBDW*Chassis Colors BlackPower saving mode < 0.5WPower off mode < 0.5WTilt -5° ~ +15°Phys. Dimension (WxHxD) 896.6 x 490.3 x 239.7 mmBox Dimension (WxHxD) 1047 x 299 x 598 mmNet Weight (Esti.) 9.6 kgGross Weight (Esti.) 15.8 kgVoltage Rating AC 100~240V(Built-in)
3-11ASUS LCD Monitor MX38VC Series3.3 Troubleshooting (FAQ)Problem Possible SolutionPower LED is not ON • Press the button to check if the monitor is in the ON mode.• Check if the power cord is properly connected to the monitor and the power outlet.• Check Power Indicator function in main menu OSD. Select “ON” to turn on power LED.The power LED lights amber and there is no screen image• Check if the monitor and the computer are in the ON mode.• Make sure the signal cable is properly connected the monitor and the computer.• Inspect the signal cable and make sure none of the pins are bent.• Connect the computer with another available monitor to check if the computer is properly working.Screen image is too light or dark • Adjust the Contrast and Brightness settings via OSD.Screen image bounces or a wave pattern is present in the image• Make sure the signal cable is properly connected to the monitor and the computer.• Move electrical devices that may cause electrical interference.Screen image has color defects (white does not look white)• Inspect the signal cable and make sure that none of the pins are bent.• Perform Reset via OSD.• Adjust the R/G/B color settings or select the Color Temperature via OSD.No sound or sound is low • Adjust the volume settings of both your monitor and computer.• Make sure the setting of OSD/sound/Source is correct.• Make sure the computer sound card driver is properly installed and activated.• Adjust Mute to OFF.
3-12Chapter 3: General Instruction3.4 Supported Timing ListPC Timings List of HDMI2.0 / DP1.2 inputResolution Refresh Rate Horizontal Frequency640x350 70Hz 25.524KHz640x480 60Hz 31.469KHz640x480 72Hz 37.861KHz640x480 75Hz 37.5KHz800x600 56Hz 35.156KHz800x600 60Hz 37.879KHz800x600 72Hz 48.077KHz800x600 75Hz 46.875KHz1024x768 60Hz 48.363KHz1024x768 70Hz 56.476KHz1024x768 75Hz 60.023KHz1152x864 75Hz 67.5KHz1280x960 60Hz 60KHz1280x1024 60Hz 63.981KHz1280x1024 75Hz 79.976KHz1280x720 60Hz44.772KHz1280x720 50Hz 36.813KHz1280x80060Hz 49.33KHz1440x90060Hz55.935KHz1680x105060Hz65.29KHz1920x108060Hz67.5KHz1920x160060Hz 98.661KHzIBM Modes, Factory Preset Timings(HDMI,DP, Type C inputs)Resolution Refresh Rate Horizontal Frequency720x400 70Hz 31.469KHzMAC Modes, Factory Preset Timings(HDMI,DP inputs)Resolution Refresh Rate Horizontal Frequency640x480 67Hz 35KHz832x624 75Hz 48.476KHzVESA Modes, User Available TimingsResolution Refresh Rate Horizontal Frequency1680x1050 60Hz(RB) 64.674KHz1920x1080 60Hz(RB) 66.587KHz2560x1600 60Hz(RB) 99.661KHz3840x1600 60Hz 98.661KHz3840x1600 75Hz 124.226KHz
3-13ASUS LCD Monitor MX38VC SeriesSD/HD Timings List of HDMI / DP inputHDMI 2.0,CEA-861F Formats, SD/HD Supported Primary Timings of(HDMI /DP input)Resolution Refresh Rate Horizontal Frequency720x480P 59.94 / 60Hz 31.469 / 31.5kHz720x576P 50Hz 31.25kHz1280x720P 50Hz 37.5kHz1280x720P 59.94 / 60Hz 44.955 /45kHz1920x1080P 29.97 / 30Hz 33.715 / 33.75kHzHDMI 2.0,CEA-861F Formats, SD/HD Supported Optional Timings of (HDMI / DP input)Resolution Refresh Rate Horizontal Frequency1440x480P 59.94 / 60Hz 31.469 / 31.5kHz1440x576P 50Hz 31.25kHz1920x1080P 50Hz 56.25kHz1920x1080P 59.94 / 60Hz 67.433 / 67.5kHz* The modes not listed in the above tables may not be supported. For optimal resolution, we recommend that you choose a mode listed in the above tables.

Navigation menu