Top Victory Electronics PD4203G 42" pdp User Manual PT4231 english monitor

Top Victory Electronics (Taiwan) Co Ltd 42" pdp PT4231 english monitor

Contents

users manual 2

1TABLE OF CONTENTSBefore Use…………………...………………………………………….…… 2Safety Precautions………………………………………………………..… 3For Your Safety Reason………………………………………………….… 7Important Safety Instruction……………………………………………… 8Introduction ……………………………………………………..……….… 10Part Names and Function ……………………………………………….... 11Installation ……………………………………………………………….… 12-13Basic Operations …………………………………………………………… 15Table of Signals Supported ……………………………………………...… 16Troubleshooting ……………………………………………………….…… 17Specifications …………………………………………………………….… 18
2Before UseBefore operating the monitor, please read this manual thoroughly. This manual should be retained for future reference.FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS)NOTE: This equipment has been tested and found to comply with the limits residential installation. This equipmentgenerates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interferenceby one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.OPEN THE PACKAGE:y The product is packaged in a carton together with other standard accessories. Any optional accessories shallbe packed separately in another carton.y The weight of the Plasma Display is approx. 36 kg. Due to the size & weight of the product, it is recommendthat it is moved by a minimum of 2 people.y The protective glass and the glass substrate are installed on the front of the product. Since both glasses canbe broken and scraped easily, move the product gently. Never place the unit with the glass facing downwardsunless it is protected with pads.y When opening the carton, check that the product is in good condition and that all standard accessories anditems are included.y Whenever possible, use the handles on the back of the Display for transport.INSTALLATION:y A specified technician from the distributor or authorised agent should always install the product, otherwise thewarranty may become void.y The power consumption of this device is 320W ,always use the jack exclusively designed for this product. Ifan extended line is required, please consult with your service agent.y The product should be installed on a flat surface to avoid tipping. The distance between the back of theproduct and the wall should be maintained for proper ventilation.y Avoid installing the product in the kitchen, bathroom or any other places with higher humidity so as not toshorten the service life of the electronic components.y Please ensure the product be installed horizontally, any 90° clockwise or counterclockwise installation mayinduce poor ventilation and subsequent component damage.y To protect the screen and avoid screen burn, do not hold on a static picture for a long time.y In order to receive the most consummate warranty, installation has to be done by the professional technicianfrom dealer or authorized distributor.NOTICE:1. The changes or modifications not expressly approved by the party responsible for compliance could void the user'sauthority to operate the equipment.2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.3. If the PDP monitor displays a fixed pattern on the screen for extended periods of time, it could make thedifferences of brightness and chromaticity between fixed pattern area and other areas. This is because thebrightness of fixed pattern area becomes lower than the other areas due to degrading of the phosphor, but thisphenomenon is not failure.
3Safety PrecautionsSafety of operators has been taken into consideration at the design and manufacture phase, butinappropriate operation may cause electric shock or fire. To prevent the product from beingdamaged, the following rules should be observed for the installation, use and maintenance of theproduct. Read the following safety instructions before starting the operation.SymbolsVarious symbols are used in this Installation Manual for the safe and proper use of the product aswell as preventing any injury or damage to persons or property. These symbols and their meaningsare described below. Please have a good understanding of these matters before reading the main textof the manual.WARNING Ignoring this indication and improper handling could be the cause ofpersonal injury such as a serious injury or death.CAUTION Ignoring this indication and improper handling could cause injury to aperson or damage to the surrounding household belongings.Examples of SymbolsThis symbol informs that there are contents that demand caution (including warnings).Concrete details of the caution are written within the diagram.This symbol indicates a prohibited matter.Concrete details of the prohibition are written within the diagram.This symbol indicates something that must be done.Concrete details of the prohibition are written within the diagram. WARNINGBe sure to have the Plasma Display installed by your store of purchase following the instructions in thismanual. If installed incorrectly, the Plasma Display could tip over, resulting in injury.To ensure safety, tighten bolts and screws securely.Failure to do so could cause the Plasma Display to tip over, resulting in injury.Do not modify parts.Doing so could cause the Plasma Display to tip over, resulting in injury.Do not use damaged parts. Doing so could cause the Plasma Display to tip over, resulting in injury.If a part should be damaged, contact the store of purchase.The units are exclusively for use only with the Plasma Displays. Do not mount them on other devices.Doing so could cause the device to tip over, resulting in injury.Do not install the product on sloping or unstable:The product may drop or tip over.
4 WARNING NOTESDo not obstruct the Plasma Display’s ventilation holes. If the ventilation holes are covered, the heat sill buildup inside, and this could lead to fire. For example, do not install the Plasma Display in narrow spaces whereventilation is poor, do not place covers over it, etc.Do not install the Plasma Display neat air conditioner air outlets or in places where vibrations are strong.Doing so could lead to fire or electric shock.Do not install the Plasma Display in humid or dusty places or places exposed to soot or vapor (such as inkitchens, near humidifiers, etc.). Doing so could lead to fire.When installing the Plasma Display, leave sufficient space around it,as shown in the diagram. Failure to do so could cause heat to build up inside, leading to fire.Hold the Plasma Display securely when mounting the units on it. Failure to do so could cause the PlasmaDisplay to fall, resulting in injury.When installing the Plasma Display on a stand with casters, be sure to block the casters, If the stand shouldmove, the Plasma Display could fall, resulting in injury.The Plasma Display is heavy, so be sure to install in a stable place and take measures to prevent it fromtipping over and causing injury. The Plasma Display has a high center of gravity. It should be unpacked andmoved by a minimum of two people, holding it at the top and bottom. Failure to do so could cause thePlasma Display to fall, resulting in injury. NOTESKeep the product away from moisture:Do not expose this appliance to rain or moisture.If water penetrates into the product, stop the operation; unplug the connector and contact with theService Center. Continuous use in this case may result in fire or electric shock.Do not place any objects on the top of the product:Spilled water or metal objects may cause short circuit, fire or electric shock if they penetrate into thehousing of the product.Never use a damaged power cord:Heavy objects, heat or tensile force may damage the power cord and cause fire or electric shock.Do not change or open the back cover: Removing the back cover of the product may cause fire orelectric shock.Contact the Service Center when inspection or adjustment is required.Do not use the product if any abnormality occurs:If any smoke or odor becomes apparent, unplug the connector and contact the Service Centerimmediately. Do not try to repair the product by yourself.Avoid using dropped or damaged appliances:If the product is dropped and the housing is damaged, the internal components may functionabnormally. Unplug the connector immediately and contact the Service Center for repair.Continuous use of the product may cause fire or electric shock.Do not touch the power cord during lightening:To avoid electric shock, avoid handling the power cord during electrical storms.50mm50mm31mm 31mm 50mm
5Unplug the connector NOTESAvoid dusty or humid rooms and rooms filled with soot or cigarette smoke.The Plasma Display’s screen could get dirty, resulting in poor picture quality.Avoid places where the screen is exposed to direct sunlight or strong artificial light.If surrounding light should shine on the screen, the screen will appear white and be hard to see.Do not install in places where the temperature is high or low.Doing so could result in damage.Additional fall prevention measures.To protect the Plasma Display from tipping over due to earthquakes or shocks, fasten the two safety fittings to the screwholes on the rear of the Plasma Display using the two safety fitting mount screws, then pass a commercially availablerope or chain through the fittings and secure the Plasma Display to a wall, pillar or other sturdy object using screws andhooks. (Do not do this when using the separately sold ceiling mount unit or wall mount unit.) While moving the PlasmaDisplay, pay attention to the rope or chain that tags along the back of the Display.Image Sticking:The plasma monitor illuminates phosphor to display images. The phosphor has a finite illumination life. After extendedperiods of illumination, the brightness of the phosphor will be degraded to such extend that stationary images wouldburn-in that part of the screen as grayed-out images.Tips to prevent such image sticking are:* Do not display images having sharp brightness differences or hi-contrast images, such as monochrome charactersand graphic patterns for long.* Do not leave stationary images appearing for long, but try to refresh them at appropriate intervals of time, or try tomove them using screen saver function.* Turn down the contrast and brightness control.Note:Such “Image Sticking” constitute misuse are NOT COVERED by the manufacturer’s warranty.Do not install the product close to smoke or moisture:Fire or electric shock may be caused when the product is installed close to smoke or moisture.Do not installed the product in an area with heavy dust or high humidity:Fire or electric shock may be caused when the product is installed in a place with heavy dust orhigh humidity.Instructions for moving the product:Ensure that the power connector and any other leads are unplugged before moving the product.The power cable should be kept away from heat sources:The heat produced by any heat source may melt the covering of the power cable.Hold the power connector when removing the power cable:Pulling the power cable itself may damage the wires inside the cable and cause fire or electricshock.Do not touch the connector with wet hands:To avoid risk of electric shock.Do not block or cover the vents:Blocking the vents may cause overheating and fire.Do not install the product in a place with little or no ventilation. Never cover the vents withtowels, blankets or dusters.
6Precautions1. Read all safety instructions and the User Manual before using the product.2. The safety instructions and User Manual should be maintained in good condition for future reference.3. Unplug the power connector before cleaning the product. A wet cloth is sufficient for the cleaning ofthe product, never use liquid or spray cleaner for cleaning the product.4. Always use the accessories recommended by the manufacturer to avoid any risk.5. When moving the product from an area of low temperature to an area of high temperature, drops of watermay condense on the housing. Do not turn on the Display immediately after moving so as not to causefire, electric shock or component damage. Please wait for a period of time. The product will warm up tonormal temperature and clear the condensation.6. Do not install the product on unstable fixtures or stands. The installation of the product should beconducted in accordance with the instructions and using the support recommended by the manufacturer.7. Do not remove the earthing pin on the power plug. The product is supplied with a three-pin earthing-type power plug, this plug will only fit an earthing-type power outlet. This is a safety feature, if you areunable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the earthingplug.8. Avoid overloading the power cord. Using extension cables or the cords of other appliances may causefire or electric shock.9. If any of the following occurs please contact the qualified technician:y The power supply or connector fails.y Liquid sprays or any object drops into the Display.y The Display is exposed to rain or other moisture.y If the product doesn’t function properly, you can only follow the instructions of the user manual tomake adjustment. Any damage caused by improper adjustment would require even longer time forqualified technician to repair it.y The Display is dropped or damaged in any way.y The performance of the Display changes substantially.10. A distance of at least 1 metre should be maintained between the product and any heat source, i.e. radiator,heater, oven, amplifier etc.11.The power cable must be replaced when using different voltage from that specified in the User Manual.For more information, contact your dealer.
7For your safety reason 触电危险，勿开后盖！CAUTIONRISK OF ELECTRICCAUTION: TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE, REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.The lightning flash with arrowhead symbol,within an equilateral triangle, is intended toalert the user to the presence of uninsulateddangerous voltage within the product’senclosure that may be of sufficientmagnitude to constitute a risk of electricshock to persons.The exclamation point within an equilateraltriangle is intended to alert the user to thepresence of important operating andmaintenance (servicing) instructions in theliterature accompanying the appliance. WarningTo prevent fire or shock hazard, do not expose thisappliance to rain or moisture.VentilationThere should be at least 10cm space between the top,rear and sides of the monitor. Power requirementsPower requirements for electrical appliances differfrom area to area. Please ensure that your appliancemeets the power requirements in your area. Remove the power plug from the AC power outletwhen not using the monitor for a long period of time.Make your contribution to protect theenvironmentUsed batteries with the ISO symbol for recycling aswell as small accumulators (rechargeable batteries),mini-batteries(cells) and starter batteriesshould not be thrown into the garbage can.Please leave them at an appropriatedepot.
8INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK,OR INJURY TO PERSONS.WARNING-When using electric products, basic precautions should always be followed, including the following:Read Instructions-All the safety and operating instructions should be read before the appliance is operated.Retain Instructions-The safety and operating instructions should be retained for future reference.Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to.Follow Instructions-All operating and using instructions should be followed.Water and Moisture-This appliance should not be used near water - for example, near a bathtub, washbowl, kitchensink, laundry tub, in a wet basement, or near a swimmingpool, and the like.Carts and Stands-Do not place this appliance on an unstable cart, stand, tripod, bracket, or table. The appliance mayfall, causing serious injury to a child or adult and serious damage to the appliance. Locate the monitor on a firm, flat andstable surface.An appliance and cart combination should be movedwith care. Quick stops, excessive force, and uneven surfaces maycause the appliance and cart combination to over turn.PORTABLE CART WARNINGWall or Ceiling Mounting-Do not recommend mounting this appliance on a wall or from a ceiling.Ventilation-This appliance should be situated so that its location or position does not interfere with its properventilation. Forexample: the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilationopenings; or placed in a built-in situation, such as a bookcase or cabinet that may impede the flow of air through theventilation openings.Heat-This appliance should be situated away from heat sources such as radiators, heat registers, stoves, or otherappliances (including amplifiers) that produce heat.Power Sources-This appliance should be connected to a power supply only of the type described in the operatinginstructions of as marked on the appliance. If you are not sure of the type of power supply to your home, consult yourappliance dealer or local power supply.Power Cord Protection-Power supply cords should be routed so that they are not likely to be walked on or pinched byitems placed upon or against them, paying particular attention to cords at plugs convenience receptacles, and the pointwhere they exit from the appliance. Do not subject the mains lead to sharp bends, heat or chemicals. If the mains lead isdamaged, disconnect it from the wall socket and have it checked by authorized service personnel.Cleaning-Unplug this appliance from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaner.Usea damp cloth for cleaning.Lightning or Nonuse Periods-For added protection for this appliance during a lightning storm, or when it is leftunattached for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This willprevent damage to the appliance due to lightning and power-surges.
9Object and Liquid Entry-Never push objects of any kind into this appliance through openings as they may touchdangerous voltage points do short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onthe appliance.Damage Requiring Service-Unplug this appliance from the wall outlet and refer servicing to qualified servicepersonnel under the following conditions:a. When the power-supply cord or plug is damaged.b. If liquid has been spilled, or objects have fallen into the appliance.c. If the appliance has been exposed to rain or water.d. If the appliance does not operate normally by following the operating instructions. Adjust only those controls thatare covered by the operating instructions as an improper adjustment of other controls may result indamage and willoften require extensive work by aqualified technician to restore the appliance to its normal operation.e. If the appliance has been dropped or the cabinet hasbeen damaged.f. When the appliance exhibits a distinct change in performance this indicates a need for service.Servicing-Do not attempt to service this appliance yourself as opening or removing covers may expose you todangerous voltage or other hazards. Refer all servicing to qualified service personnel.Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.Replacement Parts-When replacement parts are required, be sure the service technician has used replacement specifiedparts that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock,or injury to persons.Safety Check-Upon completion of any service or repair to this appliance, ask the service technician to perform routinesafety checks to determine that the appliance is in safe operating condition.Other-This product either alone or in combination with an amplifier and headphones or speakers, may be capable ofproducing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a highvolume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you shouldconsult an audiologist. Make sure the monitor is at room temperature before switching it on.Do not place anything ontop of the monitor. Never touch the power cord’s plug with wet hands. Always pull the power cord out by the plug,never by the cord.Use a household AC power source only. Never use a DC power source.Avoid using the monitor nearappliances generating strong magnetic fields (non shielded stereo speakers for example).
10IntroductionIntroduction to the PT4231 Plasma MonitorPT4231 is a seamless blend of cutting-edge visual technology and sophisticated design. At 42-inches, with a 16:9 aspectratio, the PT4231 certainly makes a big impression. However, at a mere 4.3-inches/110 mm thin, the monitor’s sleektechno-art lines blend in well with your environment. PT4231crisp, vivid image quality will transform data from anygraphic medium from PCs players-into art. And weighing only 79.4 lbs/36kg, it actually can be hung almost anywhere.We have made sure that a host of multimedia resources can be easily connected and displayed as brilliantly as intendedon the PT4231 monitor.The features you’ll enjoy include:y 42-inch screen.y 16:9 aspect ratio.y 4.3 inch / 110 mm thin.y 79.4 lbs/36kg in weighty High-resolution screen: 852×480 pixels.y 160-degrees of off-axis viewing, horizontally and vertically.y Flicker-and-warp-free display provides excellent image geometry even in screen corners.y Not affected by magnetic fields, no color drifting or edge distortion.y VGA, SVGA, XGA computer signal compatibility.y Advance graphic scan conversion automatically converts VGA, SVGA, XGA and SXGA signals to the panel’snative resolution.y AccuColor control system provides user selectable on-screen color temperature settings.y New Drive Technology.y OSD menu-driven on screen control system that makes image adjustments a snap.y Languages (English, French, Spanish).Contents of the Package Plasma multimedia display. Power cord. D-Sub cable (Mini D-Sub 15-pin to Mini D-Sub 15-pin connector). User’s manual.
11Part Names and Function1. POWER2. POWER/Standby Indicator3. INPUT Select4. MENU5. SETTING6. ADJ. + , ADJ. -Front View1. POWERTurn the monitor’s power on and off.2. POWER/Standby Indicator WindowWhen the power is on …………………. Lights orange.When the power is standby ….……… Lights red.3. INPUT SelectSwitch the input in the following order. DVI <=> D-sub 15 PIN4.MENUSets the On-Screen Display (OSD) Menu mode and displays the main menu.5. SETTING˙ In the on screen menu execute the selected highlight item or level setting 6. ADJ. + , ADJ.˙ In the on screen menu mode:A) Highlight the submenu or item you wish to enterB) Adjust the level or change the setting of the selected item
12InstallationRear ViewMAIN POWER SWITCHTurn on/off the AC power.AC INConnect the included power cord here.RS232COnly use in factory.DVI (29pin) INPUTInput for a digital RGB signal (TMDS).D-sub（15Pin）INPUTInput for the analog RGB signal from personal computer, etc.MAIN POWER WITCHAC INRS-232CDVI (29pin)D-sub RGB
13InstallationConnections with Equipment that has a Digital InterfaceConnections can be made with equipment that is equipped with a digital interface compliant with the DVI (DigitalVisual Interface) standard.* Use a DVI 29-pin signal cable when making connections to the DVI connector of the main unit.Note that the DVI terminal does not support analog RGB input source and HDCP protocol.Note:1. Input TMDS signals conforming to DVI standards. The TMDS input corresponds to single link.2. To maintain display quality, use a cable with quality prescribed by DVI standards that is within 5 meters inlength.3. RS-232C Only use in factory setting.
14Pin Assignments and signal for D-sub 15 pin RGB (Analog)Pin No. Signal (Analog)1Red2Green or sync-on-green3Blue4No Connection5 Ground6Red ground7 Green ground8Blue ground9 No Connection10 Sync signal ground11 No Connection12 Bi-directional DATA (SDA)13 Horizontal sync or Composite sync14 Vertical sync15 Data clockPin Configuration and Signal of the DVI ConnectorPin No. Signal (Digital)1 T.M.D.S Data 2 -2T.M.D.S Data 2 +3 T.M.D.S Data 2 Shield4No Connection5 No Connection6DDC Clock7 DDC Data8No Connection9 T.M.D.S Data 1 -10 T.M.D.S Data 1 +11 T.M.D.S Data 1 Shield12 No Connection13 No Connection14 +5V Power15 Ground16 Hot Plug Detect17 T.M.D.S Data 0 -18 T.M.D.S Data 0 +19 T.M.D.S Data 0 Shield20 No Connection21 No Connection22 T.M.D.S Clock Shield23 T.M.D.S Clock +24 T.M.D.S Clock -25 No Connection26 No Connection27 No Connection28 No Connection29 No Connection The unit is equipped with a type of connectorcommonly used for both analog and digital.(Functionally, this cannot be used for an analoginput.)(TMDS can be used for single link only.)
15Basic OperationsPOWER1. To power on and off the unit:Connect the power cord to your plasma monitor and wall AC power outlet.Push the main power switch on the bottom side of the plasma monitor (the main power switch can be access from the back side of the plasma monitor). The power indicator LED will flash and stabilized in red color. The monitor isin the STANDYBY mode when the LED light is stabilized in red color. Attention: For protection against power supply in the plasma monitor, when you turn off main power switch andintend to turn on again, please wait for 5 seconds before you turn it on.2. To turn on the unit:When the monitor is in STANDBY mode, press the POWER button to turn on the unit. The monitor’sPOWER/STANDBY indicator LED will flash and stabilized in orange color.3. To turn off the units:Press the POWER button，the monitor’s POWER/STANDBY indicator LED will flash and stabilized in red color.When the LED stops flashing and stabilized in red color, the monitor is in STANDBY mode.
16Table of Signals SupportedSupported resolutiony When the screen mode is NORMAL, each signal is converted to a 640 dots × 480 lines signal.y When the screen mode is FULL, each signal is converted to a 852 dots × 480 lines signal.Computer input signals supported by this systemDots × Lines Vertical Horizontal Sync Polarity Presence Screen ModeFrequency Frequency Horizontal Vertical Horizontal Vertical Normal FULL(Hz) (kHz) (4:3) (16:9)640×400 70.1 31.5 NEG NEG YES YES YES YES640×480 59.9 31.5 NEG NEG YES YES YES YES72.8 37.9 NEG NEG YES YES YES YES75.0 37.5 NEG NEG YES YES YES YES85.0 43.3 NEG NEG YES YES YES YES848×480 60.0 31.0 POS POS YES YES YES YES852×480 60.0 31.7 NEG NEG YES YES YES YES800×600 56.3 35.2 POS POS YES YES YES YES60.3 37.9 POS POS YES YES YES YES72.2 48.1 POS POS YES YES YES YES75.0 46.9 POS POS YES YES YES YES85.1 53.7 POS POS YES YES YES YES1024×768 60.0 48.4 NEG NEG YES YES YES YES70.1 56.5 NEG NEG YES YES YES YES85.0 68.7 POS POS YES YES YES YES* Recommended display card setup format.* DVI connector does not support HDCP agreement.
17TroubleshootingIf the picture quality is poor or there is some other problem, check the adjustments, operations, etc., before requestingservice.Symptom Checks RemedyNo picture is produced.y Is the monitor’s power cord plugged into apower outlet?y Plug the monitor’s power core into apower outlet.y Are all the monitor’s indicators off? y Press the power button on the monitor toturn on the power.Poor picture with RGB signal input. y Improper control setting.Incorrect 15 PIN connector pin connections.y Adjust picture controls as needed.Check pin assignments and connections.Tint is poor or colors are weak. y Are the tint and colors properly adjusted? y Adjust picture controls as needed.Check pin assignments and connections.Nothing appears on screen. y Is the computer’s power turned on? y Turn on the computer’s power.y Is a source connected? y Connect source to the monitor.y Is the power management function in thestandby or off mode?y Operate the computer (move the mouse,etc.)Part of picture is cut off or picture isnot centered.y Is the position adjustment appropriate? y Adjust the “SCREEN” properly.Picture is unstable. y Is the computer’s resolution settingappropriate?y Set to the proper resolution.POWER/STANDBY indicator blinksin redy Horizontal and / or vertical sync signal is notpresent when the Intelligent Power Managercontrol is on.y Check the input signal.POWER/STANDBY indicator is fastblinkingy Promptly switch off the power of the mainunit.y See*At PC mode if position of picture isnot correcty Is the position adjustment appropriate? y Turn on the “AUTO FOCUS” properly.* In the following case, power off the monitor immediately and contact your dealer or authorized Service Center. Themonitor turns off 5 seconds after powering on and then the POWER/STANDBY indicator fast blinks. It indicatesthat the power supply circuit or Plasma display panel or, temperature sensor has been damaged.
18SpecificationsProduct Name Plasma Monitor PT4231Screen Size 36.3"(H) × 20.4"(V) inches921(H) × 518(V) mm diagonal 42"Aspect Ratio 16 : 9Resolution 852(H) × 480(V) pixelsPixel Pitch 0.043"(H) × 0.044"(V) inches1.095(H) × 1.110(V) mmColor Reproduction 256 levels, 16,770,000 colorsSignalsSynchronization range Horizontal: 31 to 69kHzVertical: 56.0 to 85HzRS232 Control D-sub 9-pin × 1Power Supply AC100V~240V 50/60HzCurrent Rating 3.0APower Consumption 380W (typical)Dimensions 41.3(W) × 25.5(H) × 3.5(D) inches1038(W) × 640(H) × 89(D) mmWeight 79.4lbs/36kgEnvironmental ConsiderationsOperating Temperature Humidity 0°C to 40°C / 32°F to 104°F20 to 80% (no condensation)Storage Temperature Humidity -10°C to 50°C / 14°F to 122°F10 to 90% (no condensation)Front panel User Controls Power on/off, Input source select, OSD controlOther features 3D motion adaptive Scan Converter with 2-2 (50Hz), 2-3 (60Hz) Pull Down Converter,Digital Zoom function, Color Temperature Select, Power management, Plug and play(DDC1, DDC2B)Accessories VGA cable (Mini D-Sub 15-pin to Mini D-Sub 15-pin connector), Power cord, User’sManual,Regulatory Compliance UL, FCC, CE

Navigation menu