Top Victory Electronics BDL4620QL 46 inch (116.8 cm)Display User Manual BDL4620QL DFU V1 ENG 20151022 for safety 01

Top Victory Electronics (Taiwan) Co Ltd 46 inch (116.8 cm)Display BDL4620QL DFU V1 ENG 20151022 for safety 01

Users Manual

www.philips.com/welcomeBDL4620QLUser Manual (English)V2.00
BDL4620QLiiSafety InstructionsWarnings and PrecautionsKNOW THESE SAFETY SYMBOLS CAUTION:  TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.This symbol alerts you that important literature concerning operation and maintenance has been included with this product.CAUTION:  FCC/CSA regulations state that any unauthorized FKDQJHVRUPRGLÀFDWLRQVWRWKLVHTXLSPHQWPD\YRLGthe user’s authority to operate it.CAUTION:  To prevent electric shock, match the wide blade of plug to the wide slot, and fully insert the plug.TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.The Socket-outlet should be installed near the apparatus and be easily accessible.Read and follow these instructions when connecting and using your Public Information Display:  Unplug the display if you are not going to use it for an extensive period of time.  Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off. +RZHYHUQHYHUXVHDOFRKROVROYHQWVRUDPPRQLDEDVHGOLTXLGV Consult a service technician if the display does not operate normally when you have followed the instructions in this manual.  7KHFDVLQJFRYHUVKRXOGEHRSHQHGRQO\E\TXDOLÀHGVHUYLFHpersonnel.  Keep the display out of direct sunlight and away from stoves or any other heat sources.  Remove any object that could fall into the vents or prevent proper cooling of the display’s electronics.  Do not block the ventilation holes on the cabinet.  Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture. If turning off the display by detaching the power cable, wait for 6 seconds before re-attaching the power cable for normal operation.  To avoid the risk of shock or permanent damage to the set do not expose the display to rain or excessive moisture.  When positioning the display, make sure the power plug and outlet are easily accessible.  IMPORTANT: Always activate a screen saver program during your application. If a still image in high contrast remains on the screen for an extended period of time, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known phenomenon that is caused by the shortcomings inherent in LCD technology. In most cases the afterimage will disappear gradually over a period of time after the power has been switched off. Be aware that the after-image symptom cannot be repaired and is not covered under warranty.
BDL4620QLiiiImportant Safety Instructions1.  Read these instructions.2.  Keep these instructions.3.  Heed all warnings.4.  Follow all instructions.5.  Do not use this apparatus near water.6.  Clean only with dry cloth.7.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8.  Do not install near any heat sources such as radiators, heat registers, VWRYHVRURWKHUDSSDUDWXVLQFOXGLQJDPSOLÀHUVWKDWSURGXFHKHDW9.  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your VDIHW\,IWKHSURYLGHGSOXJGRHVQRWÀWLQWR\RXURXWOHWFRQVXOWDQelectrician for replacement of the obsolete outlet.10.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11.  2QO\XVHDWWDFKPHQWVDFFHVVRULHVVSHFLÀHGE\WKHPDQXIDFWXUHU12.  Use only with the cart, stand, tripod, bracket, or WDEOHVSHFLÀHGE\WKHPDQXIDFWXUHURUVROGZLWKWKHapparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13.  Unplug this apparatus during lightning storms or when unused for long periods of time.14.  5HIHUDOOVHUYLFLQJWRTXDOLÀHGVHUYLFHSHUVRQQHO6HUYLFLQJLVUHTXLUHGZKHQWKHDSSDUDWXVKDVEHHQGDPDJHGLQDQ\ZD\VXFKDVSRZHUVXSSO\FRUGRUSOXJLVGDPDJHGOLTXLGKDVEHHQVSLOOHGor objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.WARNING:  TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.WARNING:  Apparatus shall not be exposed to dripping or splashing DQGQRREMHFWVÀOOHGZLWKOLTXLGVVXFKDVYDVHVVKDOOEHplaced on the apparatus.WARNING:  The batteries (batteries installed) shall not be exposed WRH[FHVVLYHKHDWVXFKDVVXQVKLQHÀUHRUWKHOLNHWARNING:  The mains plug or appliance coupler is used as the disconnect device,the disconnect device shall remain readily operable.WARNING 7RSUHYHQWWKHVSUHDGRIÀUHNHHSFDQGOHVRURWKHURSHQÁDPHVDZD\IURPWKLVSURGXFWDWDOOWLPHV WARNING:  To prevent injury, this apparatus must be securely DWWDFKHGWRWKHÁRRUZDOOLQDFFRUGDQFHZLWKWKHinstallation instructions.CAUTION 7KHVHVHUYLFLQJLQVWUXFWLRQVDUHIRUXVHE\TXDOLÀHGservice personnel only. To reduce the risk of electric shock,do not perform any servicing other than that contained in the operating instructions unless you are TXDOLWLÀHGWRGRVRCAUTION:  Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the HTXDOL]HUWRPD[LPXPLQFUHDVHVWKHHDUSKRQHDQGheadphone output voltage and the sound pressure level. 7KHUHIRUHWRSURWHFW\RXUKHDULQJDGMXVWWKHHTXDOL]HUto an appropriate level.For UL/CUL application: For use only with UL Listed Wall Mount Bracket with minimum weight/load: 41.1 kg.For CB application: Unit without base weight: 13.7NJ7KHHTXLSPHQWand its associated mounting means still remain secure during the test. (Used wall mounting kit: 400 x 400 mm distance by using M6 screws of 20 mm long plus the thickness of the mounting bracket.)
BDL4620QLivRegulatory InformationCE Declaration of ConformityWe declare under our responsibility that the product is in conformity with the following standards:  EN60065:2002+A1:2006+A11:2008+A2:2010+A12:2011 (Safety UHTXLUHPHQWRI$XGLRYLGHRDQGVLPLODUHOHFWURQLFDSSDUDWXV (15DGLR'LVWXUEDQFHUHTXLUHPHQWRI,QIRUPDWLRQ7HFKQRORJ\(TXLSPHQW (1,PPXQLW\UHTXLUHPHQWRI,QIRUPDWLRQ7HFKQRORJ\(TXLSPHQW EN61000-3-2:2006 +A1:2009+A2:2009 (Limits for Harmonic Current Emission) EN61000-3-3:2008 (Limitation of Voltage Fluctuation and Flicker)  EN 50581:2012 (Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances)following provisions of directives applicable: 2006/95/EC (Low Voltage Directive) 2004/108/EC (EMC Directive) 2009/125/EC (ErP Directive, EC No. 1275/2008, 642/2009 Implementing Directive for Standby and Off mode power consumption) 93/68/EEC (Amendment of EMC and Low Voltage Directive) and is produced by a manufacturing organization on ISO9000 level. 2011/65/EU (RoHS 2 Directive) Federal Communications Commission (FCC) Notice (U.S. Only)7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful LQWHUIHUHQFHLQDUHVLGHQWLDOLQVWDOODWLRQ7KLVHTXLSPHQWJHQHUDWHVXVHVDQGFDQUDGLDWHUDGLRIUHTXHQF\HQHUJ\and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. ,IWKLVHTXLSPHQWGRHVFDXVHKDUPIXOLQWHUIHUHQFHWRradio or television reception, which can be determined  E\WXUQLQJWKHHTXLSPHQWRIIDQGRQWKHXVHULVencouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. ,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWand receiver. &RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDcircuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.&KDQJHVRUPRGLÀFDWLRQVQRWH[SUHVVO\DSSURYHGE\the party responsible for compliance could void the XVHU·VDXWKRULW\WRRSHUDWHWKHHTXLSPHQWUse only an RF shielded cable that was supplied with the display when connecting this display to a computer device.7RSUHYHQWGDPDJHZKLFKPD\UHVXOWLQÀUHRUVKRFNKD]DUGGRQRWexpose this appliance to rain or excessive moisture.THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE- CAUSING EQUIPMENT REGULATIONS.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE:THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS  EQUIPMENT.SUCH  MODIFICATIONS COULD VOID THE  USER’S AUTHORITY TO  OPERATE THE EQUIPMENT.  127(7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKWKHlimits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are  designed to provide reasonable protection against harmful interference in a  residential installation. 7KLVHTXLSPHQWJHQHUDWHVXVHVDQGFDQUDGLDWHUDGLRIUHTXHQF\HQHUJ\and, if not installed and used in accordance with the  instructions, may cause harmful interference to radio communications. However,  there is no guarantee that interference will not occur in a particular installation.,IWKLVHTXLSPHQWGRHVFDXVHKDUPIXOLQWHUIHUHQFHWRUDGLRRUWHOHYLVLRQUHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRIIDQGon, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna.           ,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHU&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWto which the receiver is connected.           --Consult the dealer or an experienced radio/TV technician for help.3ROLVK&HQWHUIRU7HVWLQJDQG&HUWLÀFDWLRQNotice7KHHTXLSPHQWVKRXOGGUDZSRZHUIURPDVRFNHWZLWKDQDWWDFKHGSURWHFWLRQFLUFXLWDWKUHHSURQJVRFNHW$OOHTXLSPHQWWKDWZRUNVtogether (computer, display, printer, and so on) should have the same power supply source.The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).7RFRPSOHWHO\VZLWFKRIIWKHHTXLSPHQWWKHSRZHUVXSSO\FDEOHPXVWbe removed from the power supply socket, which should be located QHDUWKHHTXLSPHQWDQGHDVLO\DFFHVVLEOH$SURWHFWLRQPDUN´%µFRQÀUPVWKDWWKHHTXLSPHQWLVLQFRPSOLDQFHZLWKWKHSURWHFWLRQXVDJHUHTXLUHPHQWVRIVWDQGDUGV317and PN-89/E-06251.
BDL4620QLvElectric, Magnetic and Electronmagnetic Fields (“EMF”)1.  We manufacture and sell many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.2.  One of our leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable OHJDOUHTXLUHPHQWVDQGWRVWD\ZHOOZLWKLQWKH(0)VWDQGDUGVapplicable at the time of producing the products.3.  We are committed to develop, produce and market products that cause no adverse health effects.4.  :HFRQÀUPWKDWLILWVSURGXFWVDUHKDQGOHGSURSHUO\IRUWKHLULQWHQGHGXVHWKH\DUHVDIHWRXVHDFFRUGLQJWRVFLHQWLÀFHYLGHQFHavailable today.5.  We play an active role in the development of international EMF and safety standards, enabling us to anticipate further developments in standardization for early integration in its products.Information for U.K. onlyWARNING – THIS APPLIANCE MUST BE EARTHED.Important:(A)(B)This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:1.  Remove fuse cover and fuse.2.  Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type.3.  5HÀWWKHIXVHFRYHU,IWKHÀWWHGSOXJLVQRWVXLWDEOHIRU\RXUVRFNHWRXWOHWVLWVKRXOGEHFXWRIIDQGDQDSSURSULDWHSLQSOXJÀWWHGLQLWVSODFHIf the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A.NOTE:  The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere.How to connect a plugThe wires in the mains lead are coloured in accordance with the following code:BLUE – “NEUTRAL” (“N”)BROWN – “LIVE” (“L”)GREEN & YELLOW – “EARTH” (“E”)1.  The GREEN & YELLOW wire must be connected to the terminal in the plug which is marked with the letter “E” or by the Earth symbol or coloured GREEN or GREEN & YELLOW.2.  The BLUE wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.3.  The BROWN wire must be connected to the terminal which marked with the letter “L” or coloured RED.Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead – not simply over the three wires.
BDL4620QLviChina RoHSѝഭ⭥ᆀؑ᚟ӗ૱⊑ḃ᧗ࡦḷ䇶㾱≲ ( ѝഭ RoHS ⌅㿴ḷ⽪㾱≲ ) ӗ૱ѝᴹ∂ᴹᇣ⢙䍘ᡆݳ㍐Ⲵ਽〠৺ਜ਼䟿DŽ䴦䜘Ԧ਽〠ᴹᇣ⢙䍘䫵(Pb)⊎(Hg)䭹(Cd)ޝԧ䬜(Cr (VI))ཊⓤ㚄㤟 (PBB)ཊⓤҼ㤟䟊(PBDE)ກᯉཆṶ OOO O O Oਾ༣ OOO O O OLCD panelCCFL X X O O O OLED X O O O O O⭥䐟ᶯ㓴Ԧ*XOOO O Oᓅᓗ OOO O O O⭥Ⓚ㓯 XOO O O OަԆ㓯ᶀ XOO O O O䚕᧗ಘ XOO O O O*˖⭥䐟ᶯ㓴Ԧवᤜঠࡧ⭥䐟ᶯ৺ަᶴᡀⲴ䴦䜘Ԧˈྲ⭥䱫ǃ⭥ᇩǃ䳶ᡀ⭥䐟ǃ䘎᧕ಘㅹDŽᵜ㺘Ṭ׍ᦞSJ/T 11364Ⲵ㿴ᇊ㕆ࡦDŽO:  㺘⽪䈕ᴹ∂ᴹᇣ⢙䍘൘䈕䜘Ԧᡰᴹ൷䍘ᶀᯉѝⲴਜ਼䟿൷൘ GB/T 26572 ḷ߶㿴ᇊⲴ䲀䟿㾱≲ԕл.X:  㺘⽪䈕ᴹ∂ᴹᇣ⢙䍘㠣ቁ൘䈕䜘ԦⲴḀа൷䍘ᶀᯉѝⲴਜ਼䟿䎵ࠪ GB/T 26572 ḷ߶㿴ᇊⲴ䲀䟿㾱≲.к㺘ѝᢃĀXāⲴ 䜘 Ԧ ѝ ˈᓄ࣏㜭䴰㾱ˈ䜘࠶ᴹᇣ⢙䍘ਜ਼䟿䎵ࠪGB/T 26572㿴ᇊⲴ䲀䟿㾱≲ˈնᱟㅖਸ⅗ⴏRoHS⌅㿴㾱≲(኎Ҿ䉱ݽ䜘࠶)DŽ༷⌘˖к㺘ӵڊѪ㤳ֻˈᇎ䱵ḷ⽪ᰦᓄ׍➗਴ӗ૱Ⲵᇎ䱵䜘Ԧ৺ᡰਜ਼ᴹᇣ⢙䍘䘋㹼ḷ⽪DŽ 10 ⧥ֵؓ⭞ᵕ䲆൘ӗ૱ᵜփкḷ⽪Ⲵ䈕ḷᘇ㺘⽪⧟ຳ؍ᣔ֯⭘ᵏ䲀Ѫ 10 ᒤDŽ⭥ᆀؑ᚟ӗ૱Ⲵ⧟ຳ؍ᣔ֯⭘ᵏ䲀ᱟᤷ⭥ᆀؑ᚟ӗ૱ѝᡰਜ਼Ⲵᴹ∂ᴹᇣ⢙䍘ᡆݳ㍐нՊੁཆ䜘⋴┿ᡆࠪ⧠ケ❦ਈᔲˈᒦф⭥ᆀؑ᚟ӗ૱Ⲵ⭘ᡧ൘֯⭘䈕⭥ᆀؑ᚟ӗ૱ᰦҏнՊሩ⧟ຳ䙐ᡀѕ䟽⊑ḃᡆሩӪփǃ䍒ӗᑖᶕѕ䟽ᦏᇣⲴᵏ䲀DŽ൘⧟ຳ؍ᣔᵏ䲀ѝˈ䈧᤹➗֯⭘䈤᰾Җ֯⭘ᵜӗ૱DŽᵜ⧟ຳ؍ᣔ֯⭘н㾶ⴆ᱃ᦏԦ˖⭥⊐DŽɅᓕᔹ⭫ᆆӝ૷ഔ᭬༺⨼㇗⨼ᶗׁɆᨆ⽰ᙝ䈪᱄ѪҶᴤྭൠޣ⡡৺؍ᣔൠ⨳ˈᖃ⭘ᡧн޽䴰㾱↔ӗ૱ᡆӗ૱ሯભ㓸→ᰦˈ䈧䚥ᆸഭᇦᓏᔳ⭥ಘ⭥ᆀӗ૱എ᭦༴⨶⴨ޣ⌅ᖻ㿴ᇊˈሶަӔ㔉ᖃൠާᴹഭᇦ䇔ਟⲴഎ᭦༴⨶䍴䍘Ⲵল୶䘋㹼എ᭦༴⨶DŽ ӻ䘸⭞ӄ䶔✣ᑜ≊ُᶗԬсᆿޞֵ⭞ ≹ ᮷ ӵ䘲⭘Ҿ䶎✝ᑖ≄ىᶑԦлᆹޘ֯⭘DŽ㫉ਔ᮷㯿᮷㔤᮷༞᮷Dan hab yungh youq gij dienheiq diuzgen mbouj dwg diegndat haenx ancienz sawjyungh.İ2000m ӻ䘸⭞ӄ⎭ᤊ P ԛс൦॰ᆿޞֵ⭞ ≹ ᮷ ӵ䘲⭘Ҿ⎧ᤄ 2000m ԕлൠ४ᆹޘ֯⭘DŽ㫉ਔ᮷㯿᮷㔤᮷༞᮷Hai dou gaxgonq, wngdang sien duenh denvasen bae.≹᮷Ā⌘᜿ྲ᷌⭥⊐ᴤᦒнᖃՊᴹ⠶⛨ড䲙ਚ㜭⭘਼ṧ㊫රᡆㅹ᭸㊫රⲴ⭥⊐ᶕᴤᦒā㫉ਔ᮷㯿᮷㔤᮷༞᮷ĀLouzsim Danghnaeuz denyouz vuenh ndaej mbouj habdangq aiq miz gij yungyiemj fatseng bauqcaq Cijndaej yungh gij denyouz doengzyiengh loihhingz roxnaeuz daengjyauq loihl haenx vuenhā≹᮷Ā᧕ޕᵜ䇮༷Ⲵᴹ㓯㖁㔌ཙ㓯ᗵ享о؍ᣔ᧕ൠ䳄⿫ ,н❦ਟ㜭Պᕅ䎧⵰⚛ㅹড䲙 !ā㫉ਔ᮷㯿᮷㔤᮷༞᮷ĀGij mizsienq vangjloz denhsen ciephaeuj bonj sezbi daeuj haenx itdingh aeu caeuq gij ciepdieg baujhoh doxliz, mboujne aiq miz gij yungyiemj dawzfeiz daengj!ā
BDL4620QLviiNorth Europe (Nordic Countries) InformationPlacering/VentilationVARNING:FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.Placering/VentilationADVARSEL:SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE.Paikka/IlmankiertoVAROITUS:SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.Plassering/VentilasjonADVARSEL:NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ.End-of-Life DisposalYour new Public Information Display contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of.3OHDVHÀQGRXWDERXWWKHORFDOUHJXODWLRQVRQKRZWRGLVSRVHRI\RXUold display from your local Philips dealer.(For customers in Canada and U.S.A.)This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations. For additional information on recycling contact www.eia.org (Consumer Education Initiative)Waste Electrical and Electronie Equipment-WEEEAttention users in European Union private householdsThis marking on the product or on its packaging illustrates that, under European Directive 2012/19/EU governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible for disposal of WKLVHTXLSPHQWWKURXJKDGHVLJQDWHGZDVWHHOHFWULFDODQGHOHFWURQLFHTXLSPHQWFROOHFWLRQ7RGHWHUPLQHthe locations for dropping off such waste electrical DQGHOHFWURQLFFRQWDFW\RXUORFDOJRYHUQPHQWRIÀFHthe waste disposal organization that serves your household or the store at which you purchased the product.End of Life Directives-RecyclingYour new Public Information Display contains several materials that can be recycled for new users.Please dispose of according to all Local, State, and Federal laws.As an ENERGY STAR Partner, we have determined that this product meets the ENERGY STAR guidelines IRUHQHUJ\HIÀFLHQF\Restriction on Hazardous Substances statement (India)This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.E-Waste Declaration for IndiaThis symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead it is your UHVSRQVLELOLW\WRGLVSRVHRI\RXUZDVWHHTXLSPHQWby handing it over to a designated collection point for the recycling of waste electrical and electronic HTXLSPHQW7KHVHSDUDWHFROOHFWLRQDQGUHF\FOLQJRI\RXUZDVWHHTXLSPHQWDWWKHWLPHRIGLVSRVDOZLOOKHOSto conserve natural resources and ensure that it is recycled in a manner that protects human health and the environ-ment. For more information about where \RXFDQGURSRII\RXUZDVWHHTXLSPHQWIRUUHF\FOLQJin India please visit the below web link.http://www.india.philips.com/about/sustainability/recycling/index.page
BDL4620QLviiiTable Of Contents5.  Change your settings ............................................145.1. Settings ........................................................................145.1.1. Picture ..........................................................145.1.2. Sound ...........................................................155.1.3. Tiling ..............................................................155.1.4. Network .....................................................165.1.5. General settings ......................................166.  USB device compatibility .....................................207. Input mode ..............................................................228.  Pixel Defect Policy .................................................238.1.  Pixels and Sub-pixels ............................................23 7\SHVRI3L[HO'HIHFWV'RW'HÀQLWLRQ .238.3.  Bright Dot Defects ...............................................238.4.  Dark Dot Defects .................................................248.5.  Proximity of Pixel Defects ................................248.6. Pixel Defect Tolerances ......................................248.7. MURA ..........................................................................249. Cleaning and Troubleshooting .............................259.1. Cleaning ......................................................................259.2. Troubleshooting ......................................................26 7HFKQLFDO6SHFLÀFDWLRQV ........................................ 271.  Unpacking and Installation ..................................... 11.1. Unpacking .....................................................................11.2. Package Contents .....................................................11.3. Installation Notes ......................................................11.4.  Mounting on a Wall .................................................22.  Parts and Functions ................................................. 32.1. Control Panel ..............................................................32.2. Input/Output Terminals .........................................42.3. Remote Control ........................................................52.3.1. General functions .....................................52.3.2.  Inserting batteries in the remote control.............................................................62.3.3.  Handling the remote control .............62.3.4.  Operating range of the remote control.............................................................63. Connection ............................................................... 7 &RQQHFWLQJ([WHUQDO(TXLSPHQWV .................... 73.2.  Connecting Multiple Displays ............................83.2.1.  RS232C control connection (optional) .......................................................83.2.2.  IR connection (optional) ......................83.3.  IR Pass-through Connection (optional) .......83.4.  Wire-connecting to Network (optional).......94. Operation ................................................................104.1.  Watch the Connected Video Source .........104.2.  Change Picture Format ......................................10 3OD\PXOWLPHGLDÀOHVYLD/RFDO$UHDNetwork .....................................................................104.3.1.  Set up the network ..............................104.3.2.  How to use DLNA-DMP .................104.3.3.  How to use DLNA-DMR from PC ...................................................................11 3OD\PXOWLPHGLDÀOHVIURP86%GHYLFH ......114.5. Play options ...............................................................12 3OD\LQJPXVLFÀOHV ..................................12 3OD\LQJPRYLHÀOHV .................................12 3OD\LQJSKRWRÀOHV .................................124.6.  How to use Opera browser (HTML5) ....12
BDL4620QL11.  Unpacking and Installation1.1. Unpacking This product is packed in a carton, together with the standard accessories. Any other optional accessories will be packed separately. Due to the size and weight of this display it is recommended for two people to move it. After opening the carton, ensure that the contents are complete and in good condition.1.2. Package ContentsPlease verify that you received the following items with your package content: LCD display CD ROM Remote control with AAA batteries Power cord (1.8 m) VGA cable (1.8 m) RS232 cable (1.8 m) Quick start guide* The supplied power cord varies depending on destination.Power CordRemote Control and AAA BatteriesVGA CableCD ROMRS232 CableQuick Start Guide* Differences according to regionsDisplay design and accessories may differ from those illustrated above.NOTES: For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and complies with the safety regulations of the particular country. Keep the package box and packing material for shipping the display.1.3. Installation Notes 'XHWRWKHKLJKSRZHUFRQVXPSWLRQDOZD\VXVHWKHSOXJH[FOXVLYHO\GHVLJQHGIRUWKLVSURGXFW,IDQH[WHQGHGOLQHLVUHTXLUHGSOHDVHFRQVXOW\RXUservice agent. 7KHSURGXFWVKRXOGEHLQVWDOOHGRQDÁDWVXUIDFHWRDYRLGWLSSLQJ7KHGLVWDQFHEHWZHHQWKHEDFNRIWKHSURGXFWDQGWKHZDOOVKRXOGEHPDLQWDLQHGfor proper ventilation. Avoid installing the product in the kitchen, bathroom or any other places with high humidity so as not to shorten the service life of the electronic components. The product can normally operate only under 2000 m in altitude. In installations at altitudes above 2000 m, some abnormalities may be experienced.
BDL4620QL21.4.  Mounting on a WallTo mount this display to a wall, you will have to obtain a standard wall-mounting kit. We recommend using a mounting interface that complies with UL1678 standard in North America.Protective SheetTable4004001.  Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face.2.  Ensure you have all accessories for mounting this display.3.  )ROORZWKHLQVWUXFWLRQVWKDWFRPHZLWKWKHEDVHPRXQWLQJNLW)DLOXUHWRIROORZFRUUHFWPRXQWLQJSURFHGXUHVFRXOGUHVXOWLQGDPDJHWRWKHHTXLSPHQWor injury to the user or installer. Product warranty does not cover damage caused by improper installation.4.  For the wall-mounting kit, use M6 mounting screws (20 mm long plus the thickness of the mounting bracket) and tighten them securely.Caution:To prevent the display from falling:  7ROHVVHQWKHSUREDELOLW\RILQMXU\DQGGDPDJHUHVXOWLQJIURPIDOORIWKHGLVSOD\LQFDVHRIHDUWKTXDNHRURWKHUQDWXUDOGLVDVWHUEHVXUHWRFRQVXOWWKHbracket manufacturer for installation location.Ventilation Requirements for enclosure locatingTo allow heat to disperse, leave space between surrounding objects as shown in the diagram below.100 mm 100 mm100 mm100 mmNOTE:  When installing the display on a wall, please consult a professional technician for proper installation. We accept no liability for installations not performed by a professional technician.
BDL4620QL32.  Parts and Functions2.1. Control PanelINPUT MENU325417681 [] buttonPress to switch the display on or off.2 [] buttonPress to select input source.3 [] buttonPress to access the OSD menu.4 [] buttonPress to move the highlight bar up to adjust the selected item while OSD menu is on.5 [] buttonPress to move the highlight bar down to adjust the selected item while OSD menu is on.6 [] buttonPress to increase the adjustment while OSD menu is on, or to increase the audio output level while OSD menu is off.7 [] buttonPress to decrease the adjustment while OSD menu is on, or to decrease the audio output level while OSD menu is off.8  Remote control sensor and power status indicator Receives command signals from the remote control. -Lights green when this display is turned on -Lights red when this display is in standby mode -Lights off when the main power of this display is turned off
BDL4620QL42.2. Input/Output Terminals3 465789101112131415162 1YPbPrLRLR INOUTINOUT1 AC INAC power input.2 MAIN POWER SWITCHMain power on/off switch.3 HDMI INHDMI video/audio input.4 DVI INDVI-D video input.5 RJ-45LAN control function for the use of remote control signal fromcontrol center.6 VGA IN (D-Sub)VGA video input.7 COMPONENT IN (RCA)Component YPbPr video source input.8 AUDIO IN (RCA)Audio input from external AV device.The audio content is the same as the speakers.9 AUDIO OUT (RCA)Audio signal output to connect your external AV device.10  AUDIO IN (3.5mm)Audio input from your PC.11  SPDIF OUTDigital audio signal output to connect your external AV device.12  IR OUT /  13  IR IN (3.5 mm)IR signal output/input for the loop-through function.NOTES:  This display’s remote control sensor will stop working if the jack [IR IN] is connected. To remotely control your A/V device via this display, refer to page 8 for IR Pass Through connection.14  RS232C OUT /  15  RS232C IN (2.5 mm)RS232C network output/input for the loop-through function.16  USB PORTConnect your USB storage device.
BDL4620QL52.3. Remote Control2.3.1. General functions11415161023456789111012131  POWER buttonSwitch this display on or off.2 PLAY buttons&RQWUROSOD\EDFNRIPHGLDÀOHV3  SOURCE buttonSelect input source. Press [ ] or [ ] button to select from USB, Network, HDMI, DVI, YPbPr, AV, or VGA. Press [ ] button WRFRQÀUPDQGH[LW4  HOME buttonAccess the OSD menu.5  LISTNo function.6         NAVIGATION buttonsNavigate through menus and select items.7  button&RQÀUPDQHQWU\RUVHOHFWLRQ8  ADJUST buttonAccess currently available options, picture and sound menus.9  BACK buttonReturn to the previous menu page or exit from the previous function.10      VOLUME  buttonAdjust volume.11   MUTE buttonPress to turn the mute function on/off.12         COLOR buttonsSelect tasks or options.13  NUMERIC buttonsEnter text for network setting.14   FORMAT buttonChange picture format.15   INFO buttonDisplay information about current activity.16   OPTIONSAccess currently available options, picture and sound menus.
BDL4620QL62.3.2.  Inserting batteries in the remote controlThe remote control is powered by two 1.5V AAA batteries.To install or replace batteries: 1.  Press and then slide the cover to open it. 2.  Align the batteries according to the (+) and (–) indications inside the battery compartment. 3.  Replace the cover. Caution:The incorrect use of batteries can result in leaks or bursting. Be sure to follow these instructions:  Place “AAA” batteries matching the (+) and (–) signs on each battery to the (+) and (–) signs of the battery compartment. Do not mix battery types. Do not combine new batteries with used ones. It causes shorter life or leakage of batteries. 5HPRYHWKHGHDGEDWWHULHVLPPHGLDWHO\WRSUHYHQWWKHPIURPOLTXLGOHDNLQJLQWKHEDWWHU\FRPSDUWPHQW'RQ·WWRXFKH[SRVHGEDWWHU\DFLGDVLWFDQdamage your skin.NOTE:  If you do not intend to use the remote control for a long period, remove the batteries.2.3.3.  Handling the remote control Do not subject to strong shock. 'RQRWDOORZZDWHURURWKHUOLTXLGWRVSODVKWKHUHPRWHFRQWURO,IWKHUHPRWHFRQWUROJHWVZHWZLSHLWGU\LPPHGLDWHO\ Avoid exposure to heat and steam. Other than to install the batteries, do not open the remote control.2.3.4.  Operating range of the remote controlPoint the front of the remote control toward this display’s remote control sensor when pressing a button.Use the remote control within a distance of less than 10m/33ft from this display’s sensor, and a horizontal and vertical angle of less than 30 degrees.NOTE:  The remote control may not function properly when the remote control sensor on this display is under direct sunlight or strong illumination, or when there is an obstacle in the path of signal transmission.30 30
BDL4620QL73. ConnectionNOTE:  The peripherals and cables shown are for example purposes only.3.1.  Connecting External EquipmentsDVD / VCR / VCDPCSTEREO AMPLIFIERAUDIO OUTUSBRS232CINOUTIRINOUTAUDIO IN AUDIOINCOMPONENT OUT (YPbPr)SPDIFHDMI IN DVI IN RJ-45 VGA IN COMPONENT INAUDIO OUTDVI OUTVGA OUTUSBAUDIO OUTAUDIO INHDMI OUTAC INYPbPrRLRLUSB
BDL4620QL83.2.  Connecting Multiple Displays3.2.1.  RS232C control connection (optional)PCDISPLAY 1 DISPLAY 2[RS232C IN][RS-232C][RS232C OUT] [RS232C IN] [RS232C OUT]3.2.2.  IR connection (optional)DISPLAY 1 DISPLAY 2[IR IN] [IR OUT] [IR IN]ExternalIR Receiver [IR OUT]NOTE:  This display’s remote control sensor will stop working if the [IR IN] is connected.3.3.  IR Pass-through Connection (optional)DISPLAY DVD / VCR / VCD(DVD / VCR / VCD)(BDL4620QL)Remote Control[IR OUT][IR IN]
BDL4620QL93.4.  Wire-connecting to Network (optional)If you connect this display to a home network, you can play photos, music and videos from your computer. See 3OD\PXOWLPHGLDÀOHV(Page 10) for more detail.PC[RJ-45][RJ-45] ROUTERINTERNETTo setup the network:1.  Switch on the router and switch on its DHCP setting.2.  Connect the router to this display with an Ethernet cable.3.  Press   button on the remote control, then select {Setup}.4. Select {Connect to network}, then press   button.5.  Follow the on-screen instructions to install the network.6.  :DLWIRUWKLVGLVSOD\WRÀQGWKHQHWZRUNFRQQHFWLRQ7.  If you are prompted, agree to the “End User Licence Agreement”.NOTE:  Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
BDL4620QL104. OperationNOTE:  The control button described in this section is mainly on the UHPRWHFRQWUROXQOHVVVSHFLÀHGRWKHUZLVH4.1.  Watch the Connected Video SourceSee page <7>IRUH[WHUQDOHTXLSPHQWVFRQQHFWLRQ1. Press [] SOURCE button.2. Press [] or [ ] button to choose a device, then press [ ] button.4.2.  Change Picture FormatYou can change the picture format to suit the video source. Each video source has its available picture formats.The available picture formats depend on the video source:1. Press [] FORMAT button.2. Press [] or [ ] button to choose a picture format, then press  [] button. {Auto zoom`(QODUJHWKHSLFWXUHWRÀOOWKHVFUHHQRecommended for minimal screen distortion but not for HD or PC. {Movie expand 16:9}: Scale 4:3 format to 16:9. Not recommended for HD or PC. {Wide screen}: Shows wide screen format content unstretched. Not recommended for HD or PC. {Unscaled}: Provide maximum detail for PC. Only available when PC mode is selected in the {Picture} menu. {4:3}: Display the classic 4:3 format.4.3.  Play multimedia files via Local Area Network7RSOD\ÀOHVYLD/RFDO$UHD1HWZRUN\RXZLOOQHHG A wired home network, connected with a Universal Plug and Play (uPnP) router. Optional: A LAN cable that connects your display to your home network. A media server running on your computer. $SSURSULDWHVHWWLQJVRQ\RXUFRPSXWHUÀUHZDOOWRDOORZ\RXWRUXQthe media server.4.3.1.  Set up the network1.  Connect your display and the computer to the same home network. See illustration below to connect your display to a network.2.  Switch on your computer and the router. Single display setup:PC[RJ-45][RJ-45] ROUTER Multiple display setup:PC[RJ-45] [RJ-45]DISPLAY 1[RJ-45]DISPLAY 2ROUTERNOTE:  If the apparatus does not return to DLNA mode due to external electrical disturbances (e.g. electrostatic discharge), user LQWHUYHQWLRQLVUHTXLUHGSet up media sharing1.  ,QVWDOODPHGLDVHUYHURQ\RXUFRPSXWHUWRVKDUHPHGLDÀOHV7KHVHare some media servers: For PC: Windows Media Player 11 (or higher) or TVersity For Mac: Twonky2.  Switch on media sharing on your computer using the media server. For more information on how to set up the media server, refer to the website of the media server.4.3.2.  How to use DLNA-DMPEnsure you have connected to the network.You can press   button to display the connection of the network.Picture formatPicture styleSound styleSmart powerVolumeMonitor groupMonitor IDModel nameSWVersionSerial noTemperatureNetwork configurationIP addressNetmaskGatewayNetwork nameEthernet MAC addressWide screenStandardPersonalOff011BDL4620QL1.2525°CDHCP & Auto IP192.168.1.116255.255.255.0192.168.1.1BDL4620QLFF:FF:FF:FF:FF:FF:HDMI 1 1080p60                                                                         26/09/2014 Friday 09:32:003OD\ÀOHVIURPGLVSOD\1. Press [ ] SOURCE button, choose Network, and press [] button.USBNetworkInternetSmartCMSHDMI DVI-DYPbPrAVVGA2.  Now, you can see all the PC’s connected to the same router on the screen. Choose the right one.3. Press [] and [ ]WRFKRRVHWKHGLUHFWRU\DQGÀOHVWRSOD\4.  You can connect up to 4 displays to the same PC and play same media stream.
BDL4620QL114.3.3.  How to use DLNA-DMR from PC1. Press [ ]  HOME button, choose Network and press [ ] button.PictureSoundTilingNetworkGeneral settingsNetwork settingsStatic IP ConfigurationDigital Media Rendere...Network nameClear Internet memory2. Set Digital Media Renderer DMR as ON.Network settingsStatic IP ConfigurationDigital Media Rendere...Network nameClear Internet memoryPictureSoundTilingNetworkGeneral settingsOffOn3.  Set the name of your display.Network settingsStatic IP ConfigurationDigital Media Renderer - D...Network nameClear Internet memoryCancel Done ClearBDL4620QL4. Press  [] HOME button, and go to Source menu. Then, choose Network and press [ ] button.5.  On your PC, go to Network and Sharing Center, and click Choose homegroup and sharing options.6.  Check the media formats. Then, click Choose media streaming options.....7. Go to Advanced sharing settings, and check Turn on network discovery.8.  1RZJRWRWKHGLUHFWRU\RI\RXUPHGLDÀOHV&KRRVHWKHPHGLDÀOHE\ULJKWFOLFN2QWKHVXEPHQXIURPPlay To<RXFDQÀQGDOOdisplays connected to your network. Choose the display, and click WKHPHGLDÀOHWRSOD\3OD\ÀOHV1. Press [] SOURCE button.2. Choose Browse network, and press [ ] button. 3.  &KRRVHDÀOHIURPWKHFRQWHQWEURZVHUDQGSUHVV[] button to start playing. 4. Press the [PLAY] buttons on the remote control to control playing. Tips: &KRRVHWKHWRSEDUWRÀOWHU\RXUÀOHVE\W\SH Choose SortWRDUUDQJHWKHÀOHVE\DOEXPQDPHDUWLVWRURWKHUÀHOGV 7RFOHDUWKHOLVWRIRIÁLQHPHGLDVHUYHUVSUHVV[] OPTIONS button. Then,  choose  &OHDURIÁLQHVHUYHUV and press [ ] button.4.4.  Play multimedia files from USB device1.  Connect your USB device to the USB port on the display. AUDIO OUTUSBRS232CINOUTIRINOUTAUDIO IN AUDIOINSPDIFUSB2. Press [ ] SOURCE button, choose USB, and press [ ] button.
BDL4620QL12USBNetworkInternetSmartCMSHDMI DVI-DYPbPrAVVGA3.  The connected USB device is detected automatically for all its SOD\DEOHÀOHVZKLFKZLOOEHDXWRPDWLFDOO\VRUWHGLQWRW\SHV Music,   Movie, and   Photo.4. Press [] BACK button to go up to the top layer in the screen. Press [] or [ ]EXWWRQWRFKRRVHWKHÀOHW\SH3UHVV[ ] button to enter its play list.5.  &KRRVHWKHÀOH\RXZDQW3UHVV[] button to start playing.6.  Follow the on-screen instruction to control the play option.7. Press [PLAY] buttons (H  F  G  I  J) to control playing. 4.5. Play options4.5.1.  Playing music files1. Choose   Music in the top bar.Music2.  Choose one music track, and press [ ] button.  7RSOD\DOOWKHWUDFNVLQDIROGHUFKRRVHRQHPXVLFÀOH7KHQpress [] to Play All. To skip to the next or previous track, press [] or [ ] button. To pause the track, press [] button. Press [ ] button again to resume playback. To skip backward or forward 10 seconds, press [] or [ ] button. To search backward or forward, press [G] or [J] button, press repeatedly to toggle between different speeds. To stop the music, press [H] button.Music options While you play music, press [] OPTIONS button, then press [ ] button to choose an option: {6KXIÁH}: Enable or disable random play of tracks. {Repeat}: Choose {Repeat} to play a track or an album repeatedly, or choose {Play once} to play a track once.NOTE:  To view information about a song (for example, title, artist or duration), choose the song, then press [] INFO button. To hide the information, press [] INFO button again.4.5.2.  Playing movie files1. Choose   Movie in the top bar. Movie2.  Choose a video, and press [ ] button.  7RSOD\DOOWKHYLGHRVLQDIROGHUFKRRVHRQHYLGHRÀOH7KHQpress [] to Play All. To pause the video, press [] button. Press [ ] button again to resume playback. To skip backward or forward 10 seconds, press [] or [ ] button. To search backward or forward, press [G] or [J] button, press repeatedly to toggle between different speeds. To stop the video, press [H] button.Movie options While playing video, press [] OPTIONS button, then press [ ] button to choose an option: {Subtitles}: Choose the available subtitle settings. {Subtitle language}: Choose the language for subtitles if available. {6KXIÁH`(QDEOHRUGLVDEOHUDQGRPSOD\RIYLGHRÀOHV {Repeat}: Choose {Repeat`WRSOD\WKHYLGHRÀOHUHSHDWHGO\RU {Play once`WRSOD\WKHYLGHRÀOHRQFH {Status}:  To view information about a video (for example, played position, duration, title, or date).4.5.3.  Playing photo files1. Choose   Photo in the top bar. Photo2.  Choose a photo thumbnail, then press  ] button. Start a slideshow If there are multiple photos in a folder, choose a photo. Then, press  [] to Play All. To skip to the previous or next photo, press [] or [ ] button, and then press [] button. To stop the slideshow, press [H] button.Slideshow options While you play a slideshow, press [] OPTIONS button, then press [] button to choose an option: {6KXIÁH}: Enable or disable random display of pictures in the slideshow. {Repeat}: Choose {Repeat} to watch a slideshow repeatedly or  {Play once} to watch once. {Slideshow Time}: Choose the displaying time for each photo in the slideshow. {Slideshow Transitions}: Choose the transition from one photo to the next.4.6.  How to use Opera browser (HTML5)1. Press [ ] SOURCE button, and choose Internet and press  [] button.USBNetworkInternetSmartCMSHDMI DVI-DYPbPrAVVGA
BDL4620QL132.  Move the cursor to URL address bar. Press [ ] button and it will pop out the on-screen keyboard. You can move the cursor to HQWHUWKH85/DGGUHVV$IWHUÀQLVKLQJWKH85/DGGUHVVFKRRVHDone.HistoryBookmarkWeb Address:XInternetwww.google.comhttp://wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww....ggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggoooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooogggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllleeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee....ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooommmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmDoneHide.   ,   @   ‘g     h     ip   q   r   sa     b     cj     k     lt     u     v?   !  -<d     e     fm    n    ow   x   y   zabc ABC 123 www Backspace3.  Move the cursor to “Æ” icon and press [ ] button.HistoryBookmarkWeb Address:XInternetwww.google.comhttp://www.google.com wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww....ggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggoooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooogggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllleeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee....ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooommmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm4.  Now, you can see the web page. NOTES: The Opera browser does not support FLASH format.  The browser is not a video source.  It will not stay at the browser screen after you restart the display.
BDL4620QL145.  Change your settingsUsing the remote control:   1. Press [] HOME button to display the OSD menu.2. Press [] [ ] [ ] or [ ] button to choose its menu item or to adjust its value. Press []EXWWRQWRFRQÀUP3. Press [] BACK button to go back to the previous menu layer.4. Press [] HOME button to exit the OSD menu.Using the display’s control buttonsINPUT MENU1. Press [ ] button to display the OSD menu.2. Press [] [ ] [ ] or [ ] button to choose menu item or adjust its value.3. Press []EXWWRQWRFRQÀUPPHQXVHOHFWLRQDQGHQWHULWVsubmenu.4. Press [] button to exit the OSD menu.5.1. SettingsPress [] HOME button.5.1.1. PicturemenuPicture styleBacklightColourSharpnessNoise reductionMPEG artifact reducti...Picture enhancementAdvancedScan modeFormat and edgesPictureSoundTilingNetworkGeneral settingsPicture style&KRRVHDSUHGHÀQHGSLFWXUHVHWWLQJBacklight Adjust the brightness of this display’s backlight.ColourAdjust the colour saturation of the picture.SharpnessAdjust the sharpness of the picture.Noise reductionChoose the amount of noise reduction for the picture.MPEG artifact reductionSmoothen transitions and haziness in the digital picture.Picture enhancementFine-tune each pixel to match surrounding pixels and produce a brilliant, KLJKGHÀQLWLRQLPDJH {Advanced sharpness}: Enable superior sharpness, especially on lines and contours in the picture. {Dynamic contrast}: Dynamically enhance the details in the dark, medium and light areas of the picture.  {Colour enhancement}: Dynamically enhance the vividness and details of colours.AdvancedAccess advanced settings such as gamma, tint, video contrast and so on. {Gamma}: Adjust the non-linear setting for picture luminance and contrast.  {Tint}: Change the colour balance. {Custom tint}: Customise colour balance setting. Only available if {Tint} Æ {Custom} is chosen.  {Video contrast}: Adjust video contrast.  {Brightness}: Adjust screen brightness. {Hue}: Adjust screen hue.Scan modeChange the display area of the image.Format and edges {Picture format}: Change the picture format.See page 10 for the descriptions about Picture format.
BDL4620QL15Input resolutionSet the special PC timing as {1366x768@60}/{1360x768@60}/{1280x768@60}/{1024x768@60}/{1440x1050@60}/{1680x1050@60}. (For VGA source only)Auto adjustAuto adjust the position of the picture. (For VGA source only)Picture resetReset all your picture settings to the factory defaults.5.1.2. SoundSound styleBassTrebleBalanceVolumeMinimum volumeMaximum volumeSurround modeAudio out (line out)AdvancedPictureSoundTilingNetworkGeneral settingsSound style$FFHVVSUHGHÀQHGVRXQGVHWWLQJVBassAdjust to increase or decrease lower-pitched sounds.Tr e bl eAdjust to increase or decrease higher-pitched sounds.BalanceAdjust to emphasize left or right audio output balance.VolumeAdjust to increase or decrease the volume.Minimum volumeSet the Minimum volume.Maximum volumeSet the Maximum volume.Surround modeSet surround effects for audio performance.Audio out (line out)Adjust audio output volume.AdvancedAccess advanced settings to enhance your audio experience. {Auto volume leveling}: Enable the reduction of sudden volume changes. {Speaker settings}: Turn on or off the internal speakers. {Clear sound`(QKDQFHVRXQGTXDOLW\ {Audio out format}: Choose the type of audio output through the digital audio output connector. (HDMI only) {Audio out delay}: Automatically sync the image on this display to the audio from a connected home theatre. {Audio out offset}: Adjust the setting for audio output delay. Available if {Audio out delay} is switched on.Sound resetReset to default setting.5.1.3. TilingEnableH monitorsV monitorsPositionFrame comp.Switch on delayPictureSoundTilingNetworkGeneral settingsWith this function you can create a single large-screen matrix (video wall) that consists of up to 100 sets of this display (up to 10-sets on the vertical and 10-sets on the horizontal sides). EnableChoose to {On} or {Off} the Tiling function. If {On}, the display will apply the settings in {H monitors}, {V monitors}, {Position}, and  {Frame comp.}.H monitorsAdjust displays on the horizontal side.V monitorsAdjust displays on the vertical side.PositionAdjust the position of this display in the screen matrix.Example: 2 x 2 screen matrix (4 displays)H monitors = 2 displays V monitors = 2 displays1234H monitorV monitorPosition
BDL4620QL16Example: 5 x 5 screen matrix (25 displays)H monitors = 5 displays V monitors = 5 displays1267348951011 12 13 14 1516 17 18 19 2021 22 23 24 25H monitorV monitorPositionFrame comp.Choose to turn the frame compensation function on or off. If selected {On}, the display will adjust the image to compensate for the width of the display bezels in order to accurately display the image.{On}{Off}Switch on delay$GMXVWWKHSRZHURQGHOD\LQJWLPHLQVHFRQGVDOORZVDVHTXHQWLDOpowering-on for each display by their ID number when multiple displays are connected.5.1.4. NetworkPictureSoundTilingNetworkGeneral settingsNetwork settingsStatic IP ConfigurationDigital Media Rendere...Network nameClear Internet memoryNetwork settings{1HWZRUNFRQÀJXUDWLRQ}: Choose how this display should assign addresses to the network resources.  The user can choose {DHCP & Auto IP} (suggested) or {Static IP}.6WDWLF,3&RQÀJXUDWLRQ'HÀQ{IP address}, {Netmask}, {Gateway}, {DNS1}, and {DNS2} for this display. If {Network settings} Æ {Static IP} is chosen.Digital Media Renderer - DMR5HFHLYHPXOWLPHGLDÀOHVIURPWKHFRQQHFWHGGHYLFHE\\RXUQHWZRUNNetwork nameIn the multiple-display connection, you can rename each display for easy LGHQWLÀFDWLRQUse the on-screen keyboard or the remote control keypad to enter the name.Clear Internet memory&OHDUDOOWKHFRRNLHVERRNPDUNVKLVWRU\OLVWDQGWH[WXVHGIRUDXWRÀOO5.1.5. General settingsPictureSoundTilingNetworkGeneral settingsMenu languageMonitor GroupMonitor IDEco modeAuto searchClockSchedulingSleep timerOneWireLocal KB lockRC lockMenu languageChoose language used for OSD menus.Monitor groupAdjust the group range between 1 to 255. The default setting is 1.Monitor IDAdjust the ID number for controlling the display via the RS232C FRQQHFWLRQ(DFKGLVSOD\PXVWKDYHDXQLTXH,'QXPEHUZKHQPXOWLSOHsets of this display are connected. Monitor ID number range is between 1 to 255. The default setting is 1.
BDL4620QL17Eco modeSet this display to reduce the power consumption automatically.Note: Factory default setting is “low power standby”, but user could not reset it to default after setting  Eco mode to”Normal” by “Factory reset” in MENU. However, user can still change the ECO mode back to “low power standby” manually.Auto searchChoose to let this display detect and display available signal sources automatically.ClockSet the current date and time for the display’s internal clock.Scheduling This function allows you to program up to 7 different scheduled time intervals for this display to activate.You can set:  Which input source the display will use for each scheduled activation period. The time for the display to turn on and turn off. The days in a week for the display to activate.NOTES: We recommend you to set up current date and time in the {Clock} menu before using this function. After changing the {Clock} option in the {General settings} menu, you need to set this {Scheduling} again.PictureSoundTilingNetworkGeneral settingsMenu languageMonitor Group Monitor IDEco modeAuto searchClockSchedulingSleep timerOneWireLocal KB lockRC lock1.  There are 7 schedule can be set. Go to Status and choose On.StatusSourceOn timeOff timeRepeat modesPlaylist settingOffOnSchedule 1Schedule 2Schedule 3Schedule 4Schedule 5Schedule 6Schedule 7 Slideshow durations2. Go to Source and choose input source. If {Source} Æ {USB PlayList} is chosen. You need to set playliist. If {Source} Æ {Internet} is chosen. You need to set URL address.NOTE:  If {Source} Æ {USB Autoplay} is chosen. You need to create a folder named “philips” in the USB.StatusSourceOn timeOff timeRepeat modesPlaylist settingSchedule 1Schedule 2Schedule 3Schedule 4Schedule 5Schedule 6Schedule 7 Slideshow durationsUSB PlayListHDMIDVI-DYPbPrAVVGAInternetSmartCMSUSB AutoPlay3. Set On time.StatusSourceOn timeOff timeRepeat modesPlaylist settingSchedule 1Schedule 2Schedule 3Schedule 4Schedule 5Schedule 6Schedule 7On timeCancel Done00 : 004. Set Off time.StatusSourceOn timeOff timeRepeat modesPlaylist settingSchedule 1Schedule 2Schedule 3Schedule 4Schedule 5Schedule 6Schedule 7Off timeCancel14 : 00Done5. Go to Repeat modes and choose.
BDL4620QL18StatusSourceOn timeOff timeRepeat modesPlaylist settingSchedule 1Schedule 2Schedule 3Schedule 4Schedule 5Schedule 6Schedule 7No repeatEvery SundayEvery MondayEvery TuesdayEvery WednesdayEvery ThursdayEvery FridayEvery SaturdaySlideshow durations 6. If {Source} Æ {USB} is chosen. Go to Playlist setting.0001/0002Options ExitPhotoPhotoVideo -Press [] [ ] EXWWRQVWRFKRRVHÀOHV -Press [] [ ] buttons to switch Playlist and File Manager. -Press [] button to set or clear the playlist.7.  To save the playlist, press [] and choose Save list.0004/0004Options ExitPhotoPhoto[..]Movie.avi\media\photoPhoto1.jpgPhoto2.jpgPhoto3.jpgSortRecursive ParserMedia TypeSave listNOTES: (DFK3OD\OLVWVXSSRUWVXSWRÀOHV Playlist will not be cleared after {Factory settings}. You have to PDQXDOO\UHPRYHWKHÀOHVRUGHOHWHXVEBVFKHGXOLQJOLVWW[WLQWKHUSB.Sleep timer6ZLWFKRIIWKLVGLVSOD\DIWHUDVSHFLÀHGWLPHOneWireConnect and control your HDMI-CEC compliant devices through HDMI port to this display with the same remote control.Local KB lockChoose to enable or disable the keyboard (control buttons) function of the display. {Unlock}: Enable the keyboard function. {Lock all}: Lock all keyboard function. {Lock but volume}: Disable all the keyboard function except the  [] and [ ] button. {Lock but power}: Disable all the keyboard function except the  [] button. {Lock all expect volume and power}: Disable all the keyboard function except the [], [ ] and [ ] button:RC lockChoose to enable or disable the button function of the remote control. {Unlock}: Enable the keyboard function. {Lock all}: Lock all keyboard function. {Lock but volume}: Disable all the keyboard function except the  [] and [ ] button. {Lock but power}: Disable all the keyboard function except the  [] POWER button. {Lock all expect volume and power}: Disable all the keyboard function except the [] [ ] and [ ] POWER button:NOTE:  To disable the lock function from Local KB lock or  RC lock item, press buttons [ ] and 1 9 9 8 on the remote control.Pixel shiftFor video input sources, you may choose {On} to move the screen image automatically to protect the display from “burn-in” or “after-image” symptoms 30 seconds after not operating the display.Smart powerChoose a backlight level to optimise dynamic power consumption and picture contrast. The options are: {Off}, {Standard}, {Medium}, {High}.Wake on lanChoose {On} and you can turn on the display by network.Switch on stateChoose the display status used for the next time you connect the power cord. {On} - The display will turn on when the power cord is connected to a wall outlet. {Standby} - The display will remain Standby when the power cord is connected to a wall outlet. {Last status} - The display will return to the previous power status (on/off/standby) when removing and replacing the power cord.Power LED LightChoose {Off} to turn off the indicator. LogoChoose {Off} and the display will not display the   logo when you switch on.Advanced power managementChoose {On}. Then, when no signal, the display will automatically turn off.
BDL4620QL196RXUFHQRWLÀFDWLRQWhen you press [] POWER button to turn on the display from standby mode or change the input signal, the information OSD is displayed on the upper left corner of the screen.Choose {Off} to turn off this function.Network control portChoose RS232 (default) or Lan (RJ45) in PD set.Factory settingsReset all your customized settings to the factory defaults.
BDL4620QL206.  USB device compatibilityUSB Video Subtitle Formats (for language subtitles, etc.)File Extensions Container Video codec Maximum  resolution Max. Frame Rate (fps) Max. Bit Rate (Mbps) Audio codec.mpgmpeg.vobPSMPEG-1 1920x1080 25p,30p,50i,60i 30 MPEG-1(L1&L2), MPEG-1,2,2.5 L3,AAC/HE-AAC(v1&v2),DVD-PCM,AC3MPEG-2 1920x1080 25p,30p,50i,60i 30MPEG-4 ASP 1920x1080 25p,30p,50i,60i 30H.264 1920x1080 25p,30p,50p,60p,60i 30.ts TSMPEG-2 1920x1080 25p,30p,50i,60i 30MPEG-1(L1&L2),MPEG-1,2,2.5 L3,AAC/HE-AAC (v1&v2),AC3,E-AC3, Dolby PulseMPEG-4 ASP 1920x1080 25p,30p,50i,60i 30H.264 1920x1080 25p,30p,50p,60p,60i 30MVC[L#ÀHOGUDWH +]1920x1080p@frame rate=24, 25,30Hz1280x720p@frame rate=50, 60Hz -30.ts .m2ts.mts .mt2MaTS  TTSMPEG-2 1920x1080 25p,30p,50i,60i 30MPEG-1(L1&L2),MPEG-1,2,2.5 L3,AAC/HE-AAC (v1&v2),AC3,E-AC3, Dolby PulseMPEG-4 ASP 1920x1080 25p,30p,50i,60i 30H.264 1920x1080 25p,30p,50p,60p,60i 30MVC[L#ÀHOGUDWH +]1920x1080p @ frame rate=24, 25,30Hz1280x720p @ frame rate=50, 60Hz -30.ts .m2ts .mtsAVCHDMPEG-2 1920x1080 25p,30p,50i,60i 30 MPEG-1(L1&L2),MPEG-1,2,2.5 L3,AAC/HE-AAC (v1&v2),AC3,E-AC3,Dolby PulseMPEG-4 ASP 1920x1080 25p,30p,50i,60i 30H.264 1920x1080 25p,30p,50p,60p,60i 30.ts.m2ts .mtsAVCHD MVC[L#ÀHOGUDWH +]1920x1080p@frame rate=24, 25,30Hz1280x720p @ frame rate=50, 60Hz -30MPEG-1(L1&L2),MPEG-1,2,2.5 L3,AAC/HE-AAC (v1&v2),AC3,E-AC3,Dolby Pulse.m4v M4V H.264 1920x1080 25p,30p,50p,60p,60i 30 AAC.ism/Manifest         .mpd frag MP4H.264 1920x1080 25p,30p,50p,60p,60i 30 AAC/HE-AAC(v1&v2), AC3,E-AC3,WMA,WMA-PROMVC[L#ÀHOGUDWH +]1920x1080p@frame rate=24, 25,30Hz1280x720p @ frame rate=50, 60Hz -30.mp4 MP4MPEG-4 ASP 1920x1080 25p,30p,50i,60i 30AAC/HE-AAC(v1&v2),AC3,E-AC3,WMA,WMA-PROH.264 1920x1080 30MVC[L#ÀHOGUDWH +] 1920x1080p@frame rate=24, 25,30Hz1280x720p @ frame rate=50, 60Hz -30WMV9/VC1 1920x1080 30p,60i 30.mkv .mk3d MKVMPEG-4 ASP 1920x1080 25p,30p,50i,60i 30 MPEG-1(L1&L2),MPEG-1,2,2.5 L3,AAC/HE-AAC (v1&v2),AC3,E-AC3, WMA,WMA-PROH.264 1920x1080 30USB Multimedia FormatsFile Extensions Container Video codec Maximum resolution )UHTXHQF\(kHz)Max.Bit Rate(Mbps) Audio codec.mp3 MP3  -  - 48 384 MPEG-1,2,2.5 L3
BDL4620QL21.wma.asfWMA(V2 up to V9.2)  -  - 48 192 WMA.wma  WMA Pro  -  - 96 768 WMA,WMA Pro.wav(PC) LPCM  -  - 192 768 LPCM.aif(mac).aiff(mac) LPCM  -  - 192 768 LPCM.aac .mp4.m4aAAC  -  - 48 1024 AAC,HE-AAC(v1&v2).pls.m3u Playlists  -  -   -  -  -.m4a M4A  -  - 48 1024 AAC,HE-AAC(v1&v2)86%3KRWRÀOHIRUPDWW\SH-3(*%0331**,)NOTES: Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed in the table above. 9LGHRFRQWHQWZLWKD%LWUDWHRU)UDPHUDWHODUJHUWKDQWKHUDWHVSHFLÀHGLQWKHWDEOHDERYHFDQFDXVHFKRSS\YLGHRGXULQJSOD\EDFN
BDL4620QL227. Input modePC Resolution:Standard ResolutionActive Resolution Refresh Rate Pixel Rate Aspect Ratio Stand for ModeH Pixels V LinesVGA 640480  60 Hz  25.175 MHz 4:3 Video Graphic Array480 72 Hz  31.5 MHz 480 75 Hz  31.5 MHz WVGA 720 400  70 Hz  33.75 MHz  16:9 Wide Video Graphic ArraySVGA 800 600 60 Hz 40 MHz 4:3 Super VGA600 75 Hz  49.5 MHz XGA 1024 768 60 Hz 65 MHz 4:3 Extended Graphic Array768 75 Hz  78.75 MHz WXGA 1280 768 60 Hz 79.5 MHz 5:3 Wide XGAWXGA 1280 800 60 Hz 79.5 MHz 16:10 Wide XGASXGA 1280 1024 60 Hz 108 MHz 5:4 Super XGAWXGA 1360 768 60 Hz 85.5 MHz 16:9 Wide XGAUXGA 1600 1200 60 Hz 162 MHz 4:3 Ultra XGAHD1080 1920 1080 60 Hz 148.5 MHz 16:9 HD1080SDTV Resolution:Standard ResolutionActive Resolution Refresh Rate Pixel Rate Aspect Ratio Stand for ModeH Pixels V Lines480i 720 480 29.97 Hz 13.5 MHz 4:3 0RGLÀHG176&6WDQGDUG480p 59.94 Hz 27 MHz576i 720 576 25 Hz 13.5 MHz 4:3 0RGLÀHG3$/6WDQGDUG576p 50 Hz 27 MHzHDTV Resolution:Standard ResolutionActive Resolution Refresh Rate Pixel Rate Aspect Ratio Stand for ModeH Pixels V Lines720p 1280 720 50 Hz 74.25 MHz 16:9 Normally DVB Mode60 Hz1080i 1920 1080 25 Hz 74.25 MHz 16:9 Normally ATSC Mode30 Hz1080p 1920 1080 50 Hz 148.5 MHz 16:9 Normally ATSC Mode60 Hz 7KH3&WH[WTXDOLW\LVRSWLPXPLQ+'PRGHò+] Your PC display screen might appear different depending on the manufacturer (and your particular version of Windows). Check your PC instruction book for information about connecting your PC to a display. ,IDYHUWLFDODQGKRUL]RQWDOIUHTXHQF\VHOHFWPRGHH[LVWVVHOHFW+]YHUWLFDODQG.+]KRUL]RQWDO,QVRPHFDVHVDEQRUPDOVLJQDOVVXFKDVstripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If so, press the [ ] button to enter the video mode. Also, make sure that the PC is connected. When horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable connections. This display settings table complies to the IBM/VESA standards, and based on the analog input. The DVI support mode is regarded as same to the PC support mode. 7KHEHVWWLPLQJIRUWKHYHUWLFDOIUHTXHQF\WRHDFKPRGHLV+]
BDL4620QL238.  Pixel Defect Policy:HVWULYHWRGHOLYHUWKHKLJKHVWTXDOLW\SURGXFWVDQGXVHVRPHRIWKHLQGXVWU\·VPRVWDGYDQFHGPDQXIDFWXULQJSURFHVVHVZKLOVWSUDFWLFLQJVWULQJHQWTXDOLW\control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma-  & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma-  & LCD- displays with an unacceptable number of defects will be repaired during the warranty period in line with your local guarantee conditions.7KLVQRWLFHH[SODLQVWKHGLIIHUHQWW\SHVRISL[HOGHIHFWVDQGGHÀQHVWKHDFFHSWDEOHGHIHFWOHYHOIRUWKH/&'VFUHHQ,QRUGHUWRTXDOLI\IRUUHSDLUXQGHUZDUUDQW\WKHQXPEHURISL[HOGHIHFWVPXVWH[FHHGDFHUWDLQOHYHODVVKRZQLQWKHUHIHUHQFHWDEOH,IWKH/&'VFUHHQLVZLWKLQVSHFLÀFDWLRQDZDUUDQW\exchange / claim back will be refused. Additionally, because some types or combinations of pixel defects are more noticeable than others, Philips sets even KLJKHUTXDOLW\VWDQGDUGVIRUWKRVH8.1.  Pixels and Sub-pixelssubpixelpixelA pixel, or picture element, is composed of three sub-pixels in the primary colors of red, green and blue. Many pixels together form an image. When all sub-pixels of a pixel are lit, the three colored sub-pixels together appear as a single white pixel. When all are dark, the three colored sub-pixels together appear as a single black pixel. Other combinations of lit and dark sub-pixels appear as single pixels of other colors.8.2.  Types of Pixel Defects + Dot DefinitionPixel and sub-pixel defects appear on the screen in different ways. There are three categories of pixel defects and several types of sub-pixel defects within each category.'RWGHÀQLWLRQ :KDWLVDGHIHFWLYH´'RWµ"2QHRUPRUHGHIHFWLYHDGMDFHQWVXESL[HODUHGHÀQHGDVRQH´GRWµ7KHQRRIGHIHFWLYHVXESL[HOVDUHQRWUHOHYDQWWRGHÀQHDGHIHFWLYHGRW7KLVPHDQVthat a defective dot can consist of one, two or three defective sub-pixels which can be dark or lit.RR G BOne dot = One Pixel; consists of three sub-pixels of Red, Green, and Blue.8.3.  Bright Dot DefectsBright dot defects appear as pixels or sub-pixels that are always lit or “on”. These are the examples of bright dot defects:One lit red, green or blue sub pixel Two adjacent lit sub pixels:Red + Blue = PurpleRed + Green = YellowGreen + Blue = Cyan (Light Blue)Three adjacent lit sub pixels (one white pixel)
BDL4620QL248.4.  Dark Dot DefectsBlack dot defects appear as pixels or sub-pixels that are always dark or “off”. These are the examples of black dot defects:One dark dot Two adjacent dark dots = 1 pair of dark dots 7ZRGDUNGRWVVSHFLÀFDWLRQVGHÀQHVWKHminimum distance between dark dots8.5.  Proximity of Pixel Defects%HFDXVHSL[HODQGVXESL[HOVGHIHFWVRIWKHVDPHW\SHWKDWDUHQHDUE\RQHDQRWKHUPD\EHPRUHQRWLFHDEOH3KLOLSVDOVRVSHFLÀHVWROHUDQFHVIRUWKHSUR[LPLW\RISL[HOGHIHFWV,QWKHWDEOHEHORZ\RXFDQÀQGVSHFLÀFDWLRQVDERXW Allowed amount of adjacent dark dots = (adjacent dark dots =1 pair of dark dots) Minimum distance between dark dots Total no. of all defective dots8.6. Pixel Defect Tolerances,QRUGHUWRTXDOLI\IRUUHSDLUGXHWRSL[HOGHIHFWVGXULQJWKHZDUUDQW\SHULRGD3'37)7SDQHOLQD3KLOLSV3ODVPD/&'GLVSOD\PXVWKDYHSL[HORUVXEpixel defects exceeding the tolerances listed in the following table.BRIGHT DOT EFFECT  ACCEPTABLE LEVEL 1 lit sub pixel  2 BLACK DOT EFFECT  ACCEPTABLE LEVEL 1 dark sub pixel  10TOTAL DOT DEFECTS OF ALL TYPES  12NOTE:  * 1 or 2 adjacent sub pixel defects = 1 dot defect8.7. MURA'DUNVSRWVRUSDWFKHVPD\RFFDVLRQDOO\DSSHDURQVRPHOLTXLGFU\VWDOGLVSOD\/&'SDQHOV7KLVLVNQRZQZLWKLQWKHLQGXVWU\DV0XUDZKLFKLVD-DSDQHVHterm for “unevenness.” It is used to describe an irregular pattern or area in which uneven screen uniformity appears under certain conditions. Mura is a UHVXOWRIWKHGHWHULRUDWLRQRIWKHOLTXLGFU\VWDODOLJQPHQWOD\HUDQGLVPRVWFRPPRQO\FDXVHGE\ORQJWHUPRSHUDWLRQXQGHUKLJKDPELHQWWHPSHUDWXUHV,Wis an industry- wide phenomenon and Mura is not repairable. It is also not covered by our warranty terms.Mura has been around since the introduction of LCD technology and with screens getting bigger and in operation 24/7, many displays are running in low light conditions. This all adds to the possibility of Mura affecting displays.HOW TO SPOT MURAThere are many symptoms of Mura and also multiple causes. Several of these are listed below: Impurities or foreign particles in the crystal matrix Uneven distribution of LCD matrix during manufacturing Non-uniform luminance distribution of the backlight Panel assembly induced stress Flaws within the LCD cells Thermal induced stress – high temperature operation over long periods of timeHOW TO AVOID  MURAAlthough we can not guarantee the complete eradication of Mura every time, in general the appearance of Mura can be minimized by these methods: Lower the backlight brightness Use a screen saver Reduce the ambient temperature around the unit
BDL4620QL259. Cleaning and Troubleshooting9.1. CleaningCaution When Using the Display Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close. Placing any object near the top of the display could also result in heat related damage to the object as well as the display itself. %HVXUHWRGLVFRQQHFWDOOFDEOHVEHIRUHPRYLQJWKHGLVSOD\0RYLQJWKHGLVSOD\ZLWKLWVFDEOHVDWWDFKHGPD\GDPDJHWKHFDEOHVDQGWKXVFDXVHÀUHor electric shock. Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of cleaning or maintenance procedure.Front Panel Cleaning Instructions The front of the display has been specially treated. Wipe the surface gently using only a cleaning cloth or a soft, lint-free cloth. ,IWKHVXUIDFHEHFRPHVGLUW\VRDNDVRIWOLQWIUHHFORWKLQDPLOGGHWHUJHQWVROXWLRQ:ULQJWKHFORWKWRUHPRYHH[FHVVOLTXLG:LSHWKHVXUIDFHRIthe display to remove dirt. Then use a dry cloth of the same type to dry. 'RQRWVFUDWFKRUKLWWKHVXUIDFHRIWKHSDQHOZLWKÀQJHUVRUKDUGREMHFWVRIDQ\NLQG Do not use volatile substances such as insert sprays, solvents and thinners.Cabinet Cleaning Instructions If the cabinet becomes dirty, wipe the cabinet with a soft, dry cloth. If the cabinet is extremely dirty, soak a lint-free cloth in a mild detergent solution. Wring the cloth to remove as much moisture as possible. Wipe the cabinet. Use another dry cloth to wipe over until the surface is dry. Do not allow any water or detergent to come into contact with the surface of the display. If water or moisture gets inside the unit, operating problems, electrical and shock hazards may result. 'RQRWVFUDWFKRUKLWWKHFDELQHWZLWKÀQJHUVRUKDUGREMHFWVRIDQ\NLQG Do not use volatile substances such as insert sprays, solvents and thinners on the cabinet. Do not place anything made from rubber or PVC near the cabinet for any extended periods of time.
BDL4620QL269.2. TroubleshootingSymptom Possible Cause RemedyNo picture is displayed 1.  The power cord is disconnected.2.  The main power switch on the back of the display is not switched on.3.  The selected input has no connection.4.  The display is in standby mode.1.  Plug in the power cord.2.  Make sure the power switch is switched on.3.  Connect a signal connection to the display.Interference displayed on the display or audible noise is heardCaused by surrounding electrical appliances or ÁXRUHVFHQWOLJKWVMove the display to another location to see is the interference is reduced.Color is abnormal The signal cable is not connected properly. 0DNHVXUHWKDWWKHVLJQDOFDEOHLVDWWDFKHGÀUPO\to the back of the display.Picture is distorted with abnormal patterns 1.  The signal cable is not connected properly.2.  The input signal is beyond the capabilities of the display.1.  Make sure that the signal cable is attached ÀUPO\2.  Check the video signal source to see if it is beyond the range of the display. Please YHULI\LWVVSHFLÀFDWLRQVZLWKWKLVGLVSOD\·VVSHFLÀFDWLRQVHFWLRQ'LVSOD\LPDJHGRHVQ·WÀOOXSWKHIXOOVL]HRIWKHscreenThe zoom mode is not correctly set. Use the Zoom mode or Custom zoom function LQWKH6FUHHQPHQXWRÀQHWXQHGLVSOD\JHRPHWU\DQGWLPHIUHTXHQF\SDUDPHWHUCan hear sound, but no picture Improperly connected source signal cable. Make sure that both video inputs and sound inputs are correctly connected.Can see picture but no sound is heard 1.  Improperly connected source signal cable.2.  Volume is turned all the way down.3. [MUTE] is turned on.4.  No external speaker connected.1.  Make sure that both video inputs and sound inputs are correctly connected.2. Press [ ] or [ ] button to hear sound.3.  Switch MUTE off by using the   [] button.4.  Connect external speakers and adjust the volume to a suitable level.Some picture elements do not light up  Some pixels of the display may not turn on. This display is manufactured using an extremely high level of precision technology: however, sometimes some pixels of the display may not display. This is not a malfunction.After-Images can still be seen on the display after the display is powered off. (Examples of still pictures include logos, video games, computer images, and images displayed in 4:3 normal mode)A still picture is displayed for an over extended period of timeDo not allow a still image to be displayed for an extended period of time as this can cause a permanent after-image to remain on the display.
BDL4620QL2710. Technical SpecificationsDisplay:Item 6SHFLÀFDWLRQVScreen Size (Active Area)  46” LCD (116.8 cm)Aspect Ratio  16:9 Number of Pixels  +ò9Pixel Pitch  +ò9>PP@Displayable Colors  16.7 Million colorsBrightness 350 cd/m2Contrast Ratio (Typical)  3000:1 Viewing Angle  178 degreesIn/Out Terminals:Item 6SHFLÀFDWLRQVSpeaker Output  Internal Speakers :/:5>506@ƙ:D\6SHDNHU6\VWHP82 dB/W/M/160 Hz ~ 13 KHz Audio Output  5&$-DFNò 0.5V [rms] (Normal) / 2 Channel (L+R)Audio Input PP6WHUHRò5&$-DFNò0.5V [rms] (Normal) / 2 Channel (L+R)RS232C Input/Output PPò TXD + RXD (1:1) LAN 5--DFNòSLQ 10/100 LAN PortHDMI Input  +'0,-DFNò (Type A) (19 pin)Digital RGB: TMDS (Video + Audio) MAX:  9LGHRSSò+]:8;*$ Audio: 48 KHz / 2 Channel (L+R)Supports LPCM onlyDVI-D Input  DVI-D jack  Digital RGB: TMDS (Video) VGA Input  '6XE-DFNòSLQ $QDORJ5*%9>SS@ƙ+&6977/Nƙ62*9>SS@ƙ0$;SSò+]:8;*$Component Input  5&$-DFNò <9>SS@ƙ3E9>SS@ƙ3U9>SS@ƙMAX: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p SPDIF Output SPDIF Port Serial digital audio output when input is HDMIIR Input/Output PPò IR pass through or IR daisy chainUSB Input 86%ò7\SH% USB 2.0, External PC connectionGeneral:Item 6SHFLÀFDWLRQVPower Input  100-240V  50-60Hz, 2.5APower Consumption (Max.) 95 WPower Consumption (Typical) 80 WPower Consumption (EPA6.0) 60 WPower Consumption (Standby & Off) < 0.5W (OSD: APM mode off)'LPHQVLRQV>:ò+ò'@ òòPPWeight 13.7 KgGross Weight 17.2 KgEnvironmental Condition:Item 6SHFLÀFDWLRQVTemperature  Operational 5 ~ 40°CStorage -20 ~ 60°C Humidity  Operational 20 ~ 80% RH (No condensation)Storage 10 ~ 90% RH (No condensation)Altitude  Operational 0 ~ 2,000 mStorage 0 ~ 5,000 m
© 2015 Koninklijke Philips N.V.  All rights reserved.Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.6SHFLÀFDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH

Navigation menu