Thrane and Thrane A S 6300B Sailor 6366 TU MF/HF 150W DSC Class A FCC User Manual Installation guide
Thrane & Thrane A/S Sailor 6366 TU MF/HF 150W DSC Class A FCC Installation guide
Contents
- 1. User manual
- 2. Installation guide
- 3. Installation manual
- 4. Service interface manual
Installation guide
![Installation guideSAILOR 6300 MF/HF Transceiver Unit& Antenna Tuning Unit 150/250/500WHow to connect the antennaHow to install the Antenna Tuning Unit mounting bracketHow to install the Transceiver Unit 150/250W1. Nut M102. Tooth lock washer M103. Fitting for mast4. Mountingplate for ATU5. Treadrod M10Disclaimer105 mm 350 mm360 mm391 mm35 mm150 mmMin.379 mm150 mmMin.360 mmSpace forcable accessSpace forservice4 x ø8mm443 mm4 x ø6mm23.5 mm88 mm145 mm500Min. mmSpace for airflowand serviceAny responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation is disclaimed by Thrane & Thrane. The information in this manual is provided for information purposes only, is subject to change without notice and may contain errors or inaccuracies. Manuals issued by Thrane & Thrane are periodically revised and updated. Anyone relying on this information should acquire the most current version e.g. from cobham.com/satcom or from the distributor. Thrane & Thrane is not responsible for the content or accuracy of any translations or reproductions, in whole or in part, of this manual from any other source.Thrane & Thrane A/S trading as Cobham SATCOM.123413 5421. Pan head screw M6x16 mm2. Washer M63. Hexagon head screw M6x10 mm4. Flat washer ø6.4xø12x1.6 mmHow to install the Antenna Tuning Unit 150/250WSpace for cable andservice access164 mm 164 mm271 mm150Min. mm75 mm12 mm80 mm200 mm352 mm504 mm500Min. mm50Min. mmSpace forservice accessSpace to nearest overhang80 mm290 mm1000 mm200 mm42113356Wire length 4 metresOptional accessories:Mounting plate and ttings for mast part no 737589.Mounting plate only - part no 737588.Cable fittingIn general a 12 metres antenna installation is preferred and can be made using an 8 metres whip and 4.5 metres feeder or a 10 metres whip and 2.5 metres feeder. In both cases the whip should be mounted on a pole providing sufcient height to have the Antenna Tuning Unit mounted such that it allows for the feeder to be erected at an angle of 45 to 60 degrees, creating a combined 12 metres vertical antenna system.The feeder wire is terminated at the antenna horn at the top of the Antenna Tuning Unit. Use a supporting insulator near the ATU to carry mechanical stress from the feeder wire. Use a short exible part of the feeder wire between the supporting insulator and the ATU horn in order not to ap-ply mechanical stress to the antenna horn.To maximize the radiated power and avoid ash over, keep distance to metal parts as long as possible, preferable more than 100 mm. Use a short direct ground connection from the ground clamp at the bottom end at the Antenna Tuning Unit to nearest suitable metal ground plane.It is recommended to use the ATU mounting bracket for the physical tting of the ATU.For further information, download the installation manual 98-144591 at www.cobham/satcom.Optional accessories:Antenna connection kit part no 405301A-905.1. Shackle2. Isolator3. Wire clamp4. Wire5. Cable tie6. Wire lug](https://usermanual.wiki/Thrane-and-Thrane-A-S/6300B.Installation-guide/User-Guide-2873614-Page-1.png)
![98-144542-A.01www.cobham.com/satcomHow to install the Antenna Tuning Unit 500WSystem conguration - Example1. Distance to metal constructions: min. 1502. Space for service access: min. 5003. Space for cable and service access: min. 200Dimensions are in mmFor further information, download the installation manual 98-144591 at www.cobham/satcomHow to install the Transceiver Unit 500W360 mm379 mm35 mm 105 mm 350 mm150 mmMin.200 mmMin.360 mm391 mm332 mm505 mmSpace for cableand airflowSpace forservice accessCable fitting4 x ø8mm4 x ø6mm1000Min. mm160 mm217 mm23.5 mmSpace for airflowand serviceTT-6209AAccessoryConnection BoxTT-6209AAccessoryConnection BoxUnitAntenna TuningTxHandsetTT-638xBMessage TerminalDSC Watch receiver250W MF/HF with 6 ch. ScanningTT-636xB(Optional)KeyboardMF/HF Control UnitTT-630xAAlarm PanelTT- 6103AEthernet SwitchTT-6197AHandsetGPS option2182 select optionTT-6270APower SupplyTT-608xAConnection BoxControl UnitDistress AlarmOther AlarmTT-6201ATransceiver UnitTT-6201ATT-6208ATT-6001ATT- 6006A(Optional)RxGPS on LAN optionOptional connectionTelex optionPrinterH1252B](https://usermanual.wiki/Thrane-and-Thrane-A-S/6300B.Installation-guide/User-Guide-2873614-Page-2.png)