Thomson 2-5838AH 5.8GHz SINGLE-LINE CORDLESS TELEPHONE HANDSET User Manual 25839 DOM IB E 0 00003988

Thomson Inc. 5.8GHz SINGLE-LINE CORDLESS TELEPHONE HANDSET 25839 DOM IB E 0 00003988

USERS MANUAL 7 OF 8

5. Use the touch-tone pad on the handset to enter the name (up to 15 characters) andpress the MEM button to save. More than one letter is stored in each of the numberkeys. For example, to enter the name Bill Smith, press the 2 key twice for the letter B.Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Wait forone second. Press the 5 key 3 times for the second letter L. Press the 1 key to insert aspace between the L and the S. Press the 7 key 4 times for the letter S; press the 6 keyonce for the letter M; press the 4 key 3 times for the letter I; press the 8 key for theletter T; press the 4 key twice for the letter H.6. Press the MEM button to save the name. The display shows ENTER TEL  NUMBR.7. Use the touch-tone pad to enter the telephone number you want to store (up to24 digits).8. Press MEM again to store the number. You will hear a confirmation tone.NOTE: If you make a mistake press the DEL/CHAN button to backspace anderase the wrong character(s) or number(s).CHANGING A STORED NUMBER1. Repeat steps 1 through 7 in Storing a Name and Number in Memory.2. Press the MEM button, and REPLACE MEMO? shows in the display.3. Press the MEM button to store the number. You will hear a confirmation tone.STORING A REDIAL NUMBER1. Repeat steps 1 through 6 in Storing a Name and Number in Memory.2. Press the REDIAL button.3. Press the MEM button to store the number. You will hear a confirmation tone.To replace an old number with a new redial number:1. Repeat steps 1 through 6 in Storing a Name and Number in Memory.2. Press the REDIAL button.3. Press the MEM button, and REPLACE MEMO? shows in the display.4. Press the MEM button again to replace the old number with the new number. Youwill hear a confirmation tone.NOTE: The stored redial number is limited to 24 digits or less.DIALING A STORED NUMBER1. Make sure the phone is ON by pressing the TALK/END/CALLBACK button.2. Press the MEM button.3. Press the memory location (0-9). The number dials automatically.- OR -1. Make sure the phone is OFF (not in TALK mode).2. Press the MEM button.3. Use the touch-tone pad or the CALLER ID/VOL (- or +) button to scroll to thenumber you want to dial.4. Press TALK/END/CALLBACK. The number dials automatically.INSERTING A PAUSE IN THE DIALING SEQUENCE OF ASTORED NUMBERIf a pause is needed to wait for a dial or access tone, press the #PAUSE button toinsert a delay in dialing sequence of a stored number (for example, after you dial 9for an outside line, or to wait for a computer access tone.) pause shows in thedisplay as a P, and each pause counts as one digit in the dialing sequence.REVIEWING AND DELETING STORED NUMBERS1. To review stored numbers, press the MEM button, and use the CALLER ID/VOL (- or+) button to scroll to the memory location, or press the corresponding number key fora desired memory location (0-9).2. When the data shows in the display, press the DEL/CHAN button. The displayshows DELETE?3. Press DEL/CHAN again to delete the data. The display shows DELETED.CHAIN DIALING FROM MEMORYUse this feature to make calls which require a sequence of numbers, such as callingcard calls to a frequently called long distance number. Each part of the sequence isdialed from memory. The following example shows you how to use chain dialing tomake a call through a long distance service:The Number For                                                 Memory LocationLong distance access number 7Authorization code 8Frequently called long distance number 91. Make sure the phone is ON (in TALK mode).2. Press MEM and then press 7.3. When you hear the access tone, press MEM and then press 8.4. At the next access tone, press MEM and then 9.TIP: Wait for the access tones before pressing the next memory button, or yourcall might not go through.HEADSET AND BELT CLIP OPERATIONCONNECTING AN OPTIONAL HEADSET TO THE HANDSETFor hands free operation:1. Remove the rubber cap covering theheadset jack.2. Connect the headset to the headset jack onthe handset. The handset receiver is disabledwhen the headset is connected.3. Adjust the headset to rest comfortably on topof your head and over your ear. Move themicrophone to approximately two to threeinches from your mouth.4. Press the TALK/END/CALLBACK button on thehandset to answer a call or make calls withthe headset.5. To return to normal operation, unplug the headsetfrom the jack.ATTACHING THE BELT CLIPTo attach the belt clip, insert the sides of the belt clip into theslots on each side of the handset. Snap the ends of the belt clipinto place.CHANGING THE BATTERYMake sure the telephone is OFF (not in TALK mode) beforeyou replace battery.1. Remove the battery compartment door.2. Disconnect the cord attached to the battery pack andremove the battery pack from the handset.3. Insert the new battery pack and connect the cord to the jackinside the battery compartment.4. Put the battery compartment door back on.5. Place handset in the base to charge. Allow the handset batteryto properly charge (for 12 hours) prior to first use or when you installa new battery pack. If you do not properly charge the phone, batteryperformance will be compromised.CAUTION: To reduce the risk of fire or personal injury,use only the battery listed in the instruction book.NOTE : If the handset battery pack is not installed or properly connected insidethe battery compartment, the handset displays "NO BATTERY," when the handsetis on the base cradle.BATTERY SAFETY PRECAUTIONS• Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type,toxic materials could be released which can cause injury.• To reduce the risk of fire or personal injury, use only the battery listed in theUser’s Guide.• Keep batteries out of the reach of children.• Remove batteries if storing over 30 days.DISPLAY MESSAGESThe following messages show the status of the phone or help you set up and useyour phone.INCOMPLETE Caller information is interrupted during transmission orDATA the phone line is excessively noisy.ENTER NAME Prompt telling you to enter a name for one of the 10memory locations.DELETE ALL? Prompt asking if you want to erase all Caller ID records.DELETE CALL ID? Prompt asking if you want to erase the current Caller ID recordthat is shown on the display.DELETED Prompt confirming a CID record is erased.DELETE? Prompt asking if you want to erase one of the 10 numbers storedin the phone's outgoing memory.END OF LIST Indicates there is no additional information in the Caller IDmemory log.NEW Indicates call or calls have not been reviewed.UNKNOWN The incoming call is from an area not serviced by Caller ID orNAME/CALLER/ caller information is not sent.NUMBERPAGING Someone is paging the handset from the base.BLOCKED CALL Caller information is blocked from transmission.BLOCKED Caller name and number is blocked from transmission.NAME/NUMBERREPT Repeat call message. Indicates that a new call from the samenumber was received more than once.NO DATA No Caller ID information was received.EMPTY Indicates a memory location is vacant.NO CALLS Indicates no calls have been received.MESSAGE Indicates a message is available.WAITINGLOW BATTERY Indicates the handset battery is low and needs charging.UNABLE TO  DIAL Indicates the CID or memory contents cannot be dialed.UNABLE TO Indicates the CID or memory contents cannot be stored.STOREPRESS TALK  KEY Indicates the CID number is a Directory Dial Number (DDN) andcannot be formatted.NO BATTERY Indicates the battery is not installed or properly connected insidethe battery compartment.HANDSET SOUND SIGNALSSignal MeaningA long warbling tone Signals an incoming call(with ringer on)Three short beeps Page signal(several times)One beep every 7 seconds Low battery warningTROUBLESHOOTING TIPSCALLER ID SOLUTIONSNo display• Fully charge (for 12 hours) or replace the battery.• If you are using AC (electrical) power, make sure that the unit is connected to a non-switched electrical outlet. Unplug the AC power adaptor from the unit and plug itback in.• To see Caller ID information in your display, you must be subscribed to Caller IDservice through your local telephone company.Caller ID incomplete• The unit displays this message if it detects anything other data messagethan valid Caller ID information during the silent period after the first ring. Thismessage indicates the presence of noise on the line.TELEPHONE SOLUTIONSNo dial tone• Check or repeat installation steps• Make sure the base power cord is connected to a working electrical outlet.• Make sure the telephone line cord is connected to the base unit and the modularphone jack?• Disconnect the base from the wall phone jack and connect another phone to thesame jack. If there is no dial tone on the second phone, the problem might be yourwiring or local service.• The handset might be out of range of the base. Move closer to the base.• Make sure the battery is properly charged (for 12 hours).• Ensure the battery pack is installed correctly.• Did the handset beep when you pressed the TALK/END/CALLBACK button? Did thein use indicator come on? The battery may need to be charged.Handset does not ring• Make sure the RINGER switch on the handset is turned to ON.• You may have too many extension phones on your line. Try unpluggingsome phones.• See solutions for “No dial tone.”Charge/in use indicator on the base flashes• Provided your phone company offers voice messaging service and you subscribeto it, the charge/in use indicator on the base flashes when the phone is not in useto indicate there is a message waiting. It stops flashing after the message hasbeen reviewed.You experience static, noise, or fading in and out• Change channels• The handset maybe out of range. Move closer to the base.• Relocate the base.• Charge the battery.• Make sure base is not plugged into an electrical outlet with anotherhousehold appliance.Unit beeps• Place handset in base cradle for 20 seconds to reset the security code. If thatdoesn’t work, charge the battery for 12 hours.• See solutions for “No dial tone.”• Replace the battery.Memory dialing• Make sure you correctly program the memory location keys.• Make sure you follow the proper dialing sequence.• You must reprogram numbers into memory after a power outage orbattery replacement?Out of range• Move closer to the base.• Reset the battery. Unplug the battery and plug it in again after five seconds.• Reset the power adaptor. Unplug the adaptor and plug it in again after five seconds.CAUSES OF POOR RECEPTION• Aluminum siding.• Foil backing on insulation.• Heating ducts and other metal construction can shield radio signals.• You’re too close to appliances such as microwaves, stoves, computers, etc.• Atmospheric conditions, such as strong storms.• Base is installed in the basement or lower floor of the house.• Base is plugged into an AC outlet with other electronic devices.• Baby monitor is using the same frequency.• Handset battery is low.• You’re out of range of the base.GENERAL PRODUCT CARETo keep your telephone working and looking good, follow these guidelines:• Avoid putting the phone near heating appliances and devices that generateelectrical noise (for example, motors or fluorescent lamps).• DO NOT expose to direct sunlight or moisture.• Avoid dropping and other rough treatment to the phone.• Clean with a soft cloth.• Never use a strong cleaning agent or abrasive powder because this will damagethe finish.• Retain the original packaging in case you need to ship the phone at a later date.SERVICEIf trouble is experienced with this equipment, for repair or warranty information,please contact customer service at 1-800-448-0329. If the equipment is causing harmto the telephone network, the telephone company may request that you disconnectthe equipment until the problem is resolved.This product may be serviced only by the manufacturer or its authorized serviceagents. Changes or modifications not expressly approved by ATLINKS USA, Inc.could void the user’s authority to operate this product. For instructions on how toobtain service, refer to the warranty included in this guide or call customer service at1-800-448-0329.Or refer inquiries to:ATLINKS USA, Inc.Manager, Consumer RelationsP O Box 1976Indianapolis, IN 46206Attach your sales receipt to the booklet for future reference or jot down the date thisproduct was purchased or received as a gift. This information will be valuable ifservice should be required during the warranty period.Purchase date  ________________________________________________Name of store  ________________________________________________INTERFERENCE INFORMATIONThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference; and (2)This device must accept any interference received, including interference that maycause undesired operation.This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna (that is, the antenna for radio ortelevision that is “receiving” the interference).• Reorient or relocate and increase the separation between the telecommunicationsequipment and receiving antenna.• Connect the telecommunications equipment into an outlet on a circuit differentfrom that to which the receiving antenna is connected.If these measures do not eliminate the interference, please consult your dealer or anexperienced radio/television technician for additional suggestions. Also, the FederalCommunications Commission has prepared a helpful booklet, “How To Identify andResolve Radio/TV Interference Problems.” This booklet is available from the U.S.Government Printing Office, Washington, D.C. 20402. Please specify stock number004-000-00345-4 when ordering copies.NOTE: The RBRC seal on the battery used in yourATLINKS USA, Inc. product indicates that we areparticipating in a program to collect and recycle NickelCadmium batteries throughout the United States.Please call 1-800-8-BATTERY for information or contactyour local recycling center.Ni-CdRBRCRBRCHeadset jackHeadset plugLIMITED WARRANTYWhat your warranty covers:• Defects in materials or workmanship.For how long after your purchase:• One year, from date of purchase.(The warranty period for rental units begins with the first rental or 45 days fromdate of shipment to the rental firm, whichever comes first.)What we will do:• Provide you with a new or, at our option, a refurbished unit. The exchange unit isunder warranty for the remainder of the original product’s warranty period.How you get service:• Properly pack your unit. Include any cables, etc., which were originally providedwith the product. We recommend using the original carton and packing materials.• ”Proof of purchase in the form of a bill of sale or receipted invoice which isevidence that the product is within the warranty period, must be presented toobtain warranty service.” For rental firms, proof of first rental is also required.Also print your name and address and a description of the defect. Send viastandard UPS or its equivalent to:ATLINKS USA, Inc.c/o Thomson11721 B Alameda Ave.Socorro, Texas  79927• Pay any charges billed to you by the Exchange Center for service not covered bythe warranty.• Insure your shipment for loss or damage. ATLINKS accepts no liability in case ofdamage or loss.• A new or refurbished unit will be shipped to you freight prepaid.What your warranty does not cover:• Customer instruction. (Your Owner’s Manual provides information regardingoperating instructions and user controls. Any additional information, should beobtained from your dealer.)• Installation and setup service adjustments.• Batteries.• Damage from misuse or neglect.• Products which have been modified or incorporated into other products.• Products purchased or serviced outside the USA.• Acts of nature, such as but not limited to lightning damage.Product Registration:• Please complete and mail the Product Registration Card packed with your unit. Itwill make it easier to contact you should it ever be necessary. The return of thecard is not required for warranty coverage.Limitation of Warranty:• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THISPRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALLIMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATIONGIVEN BY ATLINKS USA, INC., ITS AGENTS, OR EMPLOYEES SHALL CREATE AGUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THEEXCLUSIVE REMEDY OF THE CONSUMER. ATLINKS USA, INC. SHALL NOT BELIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THEUSE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS ORIMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIESAND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OFINDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANYIMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTYPERIOD SET FORTH ABOVE.How state law relates to this warranty:• Some states do not allow the exclusion nor limitation of incidental orconsequential damages, or limitations on how long an implied warranty lasts sothe above limitations or exclusions may not apply to you.• This warranty gives you specific legal rights, and you also may have other rightsthat vary from state to state.If you purchased your product outside the USA:• This warranty does not apply. Contact your dealer for warranty information.ACCESSORY INFORMATIONTo place order, have your Visa, MasterCard, or Discover Card readyand call toll-free 1-800-338-0376.A shipping and handling fee will be charged upon ordering.We are required by law to collect appropriate sales tax for each individual state, country,and locality to which the merchandise is being sent.Items are subject to availability.*Prices are subject to change without notice.Slots for belt clipDESCRIPTION MODEL NO.Belt Clip 5-2673Headset 5-2425Replacement Battery 5-2548Power adaptor 5-2501 (black)

Navigation menu