The Watt Stopper d b a Qmotion 433B96D570 NANO Remote Transmitter User Manual 13 0403 Exhibit Cover B

Qmotion Incorporated NANO Remote Transmitter 13 0403 Exhibit Cover B

Manual

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598Certification ExhibitFCC ID: 2ABLX-433B96D570IC: 8832A-433B96D570FCC Rule Part: 15.231IC Radio Standards Specification: RSS-210ACS Project Number: 13-0403Manufacturer: Qmotion IncorporatedModel: QAR-433, QAD-433, QAS-433, QFR-433, QFD-433, QFS-433Manual
Operation ManualQmotion remotesQAR-433, QFR-433,QAD-433, QFD-433,QAS-433, QFS-433This family of remotes consists of four types of buttons forvarious purposes. The buttons are Up/Down or Open/Close,Channel, Variable Position and Mode Select. The remotes haveLEDs for channel/mode indicators. The mode select button onthe back is used for programing purposes in factory. Thechannel button is used to select the channel that is to be selectedfor user selected shades. The up/down or open/close buttonsand the variable position buttons are used to direct the shadeselected to move to a specific position. Programing of selectedshades to certain address programable channels is performed inaccordance with specific shade directions.
FCC COMPLIANCEWarning: Changes or modifications to this device not expressly approved by Qmotion™Incorporated could voidthe user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferencein a residentialinstallation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and usedin accordance with the instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.INDUSTRY CANADA COMPLIANCEUnder Industry Canada regulations, this radio transmitter may only operate using an antenna of a type andmaximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interferenceto other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power(e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementationd'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal(ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillageradioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'unecommunication satisfaisante.This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the followingtwo conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le présent appareil est conforme auxCNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deuxconditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit acceptertout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement

Navigation menu