The Singing Machine SML2088 CD+G/MP3+G KARAOKE PLAYER WITH BLUETOOTH User Manual

The Singing Machine Company, Inc. CD+G/MP3+G KARAOKE PLAYER WITH BLUETOOTH

UserManual.wiki >

The Singing Machine >

SML2088 User Manual

User Manual

TMSML2088CINSTRUCTION MANUAL/ MODE D’EMPLOIwww.singingmachine.comThe Singing Machine® is a registered trademark of The Singing Machine Co., Inc.The Singing Machine® est une marque déposée de The Singing Machine Co., Inc.

— E1 —WarningsCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The Caution marking is located on the bottom panel.DANGEROUS VOLTAGE: The lightning ﬂash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to persons.WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this product.FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modiﬁcations to this equipment may cause harmful interference unless the modiﬁcations are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modiﬁcation is made.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.INDUSTRY CANADA NOTICE:This device complies with Industry Canada Iicense-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.DRIPPING WARNING: This product shall not be exposed to dripping or splashing, and no objects ﬁlled with liquids, such as vases, shall be placed on the product.VENTILATION WARNING: The normal ventilation of the product shall not be impeded for intended use.THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR CHAPTER 1, SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURED.Warnings:• This CD player employs a laser light beam. Only a qualiﬁed service person should remove the cover or attempt to service this device, due to possible eye injury. • The use of controls, adjustments, or procedures other than those speciﬁed herein might result in hazardous radiation exposure. • The apparatus shall be used in an open area.CAUTION!Invisible laser radiation when open and interlocks defeated. Avoid exposureto beam.Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.• The rating information is located at the bottom of the unit.Important Safety Information1. Read these Instructions.2. Keep these Instructions.3. Heed all Warnings.4. Follow all Instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any of the ventilation openings. Install in accordance with the Manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with a cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. WARNING: To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture. Do not place objects ﬁlled with water, such as a vase, on the apparatus.16. The AC mains plug is used as the power disconnect device and it should remain readily accessible and operable during intended use. In order to completely disconnect the apparatus from power, the mains plug should be completely removed from the AC outlet socket.17. CAUTION: To reduce the risk of ﬁre or explosion, do not expose batteries to excessive heat such as sunshine, ﬁre or other heat sources.CAN ICES-3(B)/NMB-3(B)CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPEN

— E2 —IncludedPlease make sure the following items are included.Wired MicrophoneMain UnitAC AdapterManual Audio/Video CablesWelcome Kit

— E3 —Location of Controls (Top/Front)1. Handle2. CD Compartment3. MASTER VOLUME Control4. ECHO + Button5. MIC VOLUME + Button 6. POWER (ON/OFF) Button7. SKIP/ 10+ Button8. LIGHT MODE Button9. ECHO – Button10. FUNCTION Button 11. USB port12. MIC VOLUME – Button13. AUX IN Jack14. Skip –/NavigationButton15. KEY +/NavigationButton16. Open/Close Tab17. ENTER/Play/Pause Button18. Skip +/NavigationButton19. Record Button20. Mic holders21. PROG/REPEAT Button22. STOP/ PAIR Button23. KEY –/NavigationButton24. MIC 2 Jack25. MIC 1 Jack26. Speaker uvwxVyWUXatakalamanaoapaqarasbtbkbnblbobmbp

— E4 —CDGREPEATPLAY/PAUSEPROGRAMLocation of Controls (Rear)1. CDG Indicator 2. Display 3. REPEAT Indicator4. PLAY/PAUSE Indicator5. PROGRAM Indicator1. Video Out Jack2. Right Audio Out Jack3. Left Audio Out Jack4. DC In Jack5. Battery CompartmentLocation of Controls (Display)uuxxyyvvww

— E5 —ConnectionConnecting the Microphone(s)Microphones:Connect a microphone into MIC jack 1 u as well as MIC jack 2 v (when desired). Note: Do not drop or tap the Mic as damage to the Mic or speakers may occur. Do not twirl the microphone by cord as it will cause damage to the encased wiring.Connecting the Unit to a TVVIDEOINPUTAUDIOINPUTR LRCA cablesVIDEO OUT(yellow)AUDIO OUT(white - Lred - R)REAR VIEW OF TVTo output the video, lyrics and audio to your TV, perform the following steps: 1 Connect the RCA video cable (Yellow) to the VIDEO OUT jack and the audio cables (White and Red) to the AUDIO OUT jacks located on the back of the Singing Machine. 2 Connect the opposite end of the RCA video cable (Yellow) to the VIDEO IN jack and the audio cables (White and Red) to the AUDIO IN on your TV.Notes: • This unit can be used with or without a TV, but it is highly recommended to use a TV in order to utilize all the features.• Also refer to the TV’s User Guide for input and display instructions. • To see the lyrics on the screen, you must use a CD+G disc or MP3+G ﬁles.uv

— E6 —ConnectionConnecting to AC PowerInserting BatteriesInsert the AC power cord into a conveniently located AC outlet having 120V AC, 60Hz. Note: Make all connections before connecting to AC power. 1 Slide the battery door in the direction the arrows to reveal the battery compartment. Insert eight (8) “C” size alkaline batteries (not included) as indicated on the diagram. 2 Replace cover tightly before operating. Battery PrecautionsThe precautions below should be followed when using batteries inthis device:1. Use only the size and type of batteries specified.2. Be sure to follow the correct polarity when installing thebatteries as indicated in the battery compartment. Reversedbatteries may cause damage to the device.3. Do not mix different types of batteries together (e.g. Alkalineand Carbon Zinc) or old batteries with fresh ones.4. If the device is not to be used for a long period of time,remove the batteries to prevent damage or injury frompossible battery leakage.5. Do not try to recharge batteries not intended to be recharged,they can overheat and rupture. (Follow battery manufacturer’sdirections.)6. Rechargeable batteries are to be removed from the productbefore being charged.7. Rechargeable batteries are only to be charged under adultsupervision.8. Exhausted batteries are to be removed from the product.9. Batteries shall not be exposed to excessive heat such assunshine, fire or the like.CONNECTING THE POWER   ! !!!    

— E7 —Connecting to Aux In JackConnect an external device by using an appropriate cable (3.5mm audio cable not included) as shown.Note: See page E18 to select and use the Aux In function.To External UnitAUDIO OUTPUT/ HEADPHONE JACKLINE INOperationDisco LightsWhen the unit is turned on, the Light mode 1 is automatically activated. The lights will light up and will synchronize with sound when you speak or sing into the microphone. Press the LIGHT MODE button for Light mode 2 which will display the light show but will not respond to the microphone.Press the LIGHT MODE button again to turn off the Lights.u

— E8 —OperationPlaying a CD1 Connect the unit as described previously; it should be connected to a TV. Press the ON/OFF button to turn the unit on. 2 Lift open the CD door and insert a CD (with standard or MP3+G files) or a CD+G by gently pressing it on the center spindle. Then close the CD door. Notes: • What is a CD+G? A CD+G (CD+Graphics) is the standard format for most karaoke discs that will display the words on the screen.• What is an MP3+G? MP3+G is the newest format for karaoke music utilizing the MP3’s small file size. It will display the words on the screen. 3 Repeatedly press the FUNCTION button to select the CDG/CD mode; “---” will blink when searching the disc and then the total number of tracks will appear.4 Press the ENTER/PLAY/PAUSE button to start playback; if listening to a CD+G file, the image and lyrics will appear on the TV screen (if connected). When a CDG disc is inserted, the CDG indicator will light.uwvx

— E9 —OperationPlaying a CD (Continued)5 Adjust the volume to a comfortable level using the MASTER VOLUME control. Notes:• Never place anything other than a CD in the compartment, as foreign objects can damage the unit.• If no disc is inserted, “no” will appear on the display.• If connected to a TV or other audio source, adjust the volume of the TV using its own volume control. 6 Connect microphone(s) and slide the ON/OFF switch on the microphone to the ON position.7 Press the MIC VOLUME + or –button as desired, which will affect both microphones.8 Press the ECHO + or – button to add an echo effect to your voice. 9 Adjust the Key using the KEY +/ and KEY –/ buttons to obtain the best key for the playing track.yUVWX

— E10 —OperationPlaying a CD (Continued)10 SKIP: Advance or go back one track by pressing the Skip –/Navigationand Skip +/Navigationbutton. 11 REPEAT: During playback, press the PROG/REPEAT button once to repeatedly play the selected song; the Repeat indicator will blink. Press the PROG/REPEAT button a second time to repeatedly play the whole CD; the Repeat indicator will light solid. Press it again to cancel Repeat function, the Repeat/Program indicator turns off.12 PROGRAM: You can program up to 20 tracks on any disc for playback in any desired order. While in the Stop mode, press the PROG/REPEAT button; the Repeat/Program indicator will blink and “01” will appear on the display indicating the first program is ready to program. 13 PROGRAM: Select the first track using the Skip –/Navigationand Skip +/Navigation buttons. Press the PROG/REPEAT button again to confirm the entry. Repeat to set up to 20 tracks into memory. When done, press the ENTER/PLAY/PAUSE button to start playback.atakalamam

— E11 —OperationPlaying a CD (Continued) Program Notes: • Press the STOP/PAIR button TWICE to stop and clear the program.• If more than 20 tracks are attempted to be programmed, “FUL” will appear in the display.14 PAUSE: During playback, if you wish to pause the disc momentarily, press the ENTER/PLAY/PAUSE button; the PLAY/PAUSE indicator will blink. Press again to resume normal playback.15 Press the STOP/PAIR button to stop playback.16 RECORD YOUR VOCAL PERFORMANCE: To record your singing as well as the music, press the RECORD button. Recording will begin and the light around the RECORD button will light solid. When done recording, press the RECORD button again; the light around the RECORD button will turn off.Notes: • The recorded audio file will record onto the USB drive.• See "Playing Songs from the USB" section to play back your recorded files. 17 Press the ON/OFF button to turn the unit off. anapaqao

— E12 —OperationPlaying Songs from the USB1 Connect the unit as described previously; it should be connected to a TV. Press the ON/OFF button to turn the unit on. 2 Insert a USB flash drive into the USB slot on the unit so it faces upward.3 Repeatedly press the FUNCTION button to select the USB mode; “USb” will appear when searching the drive and then the total number of files will appear.Note: It is highly recommended to have it connected to a TV for USB playback.4 Press the ENTER/PLAY/PAUSE button to start playback; if listening to an MP3+G file, the image and lyrics will appear on the TV screen (if connected). Notes: • If connected to a TV you will see the selected song and folders on the TV screen. You can navigate them using the Navigation buttons.• If you recorded any audio files you can also select them using the Navigation buttons to select the REC folder on the TV screen.5 Adjust the volume to a comfortable level using the MASTER VOLUME control. Note: If connected to a TV or other audio source, adjust the volume of the TV using its own volume control.uvwyx

— E13 —OperationPlaying Songs from the USB (Continued)6 Connect microphone(s) and slide the ON/OFF switch on the microphone to the ON position.7 Press the MIC VOLUME + or –button as desired, which will affect both microphones.8 Press the ECHO + or – button to add an echo effect to your voice. 9 Adjust the Key using the KEY +/ and KEY –/ buttons to obtain the best key for the playing track.10 SKIP: Advance or go back one track by pressing the Skip –/Navigation and Skip +/Navigation buttons. You can also skip ahead 10 files/tracks using the SKIP 10+ button.11 REPEAT: During playback, press the PROG/REPEAT button once to repeatedly play the selected song; the Repeat/Program indicator will blink rapidly. Press the PROG/REPEAT button a second time to repeatedly play the selected folder; the Repeat indicator will blink slowly. Press a third time to repeatedly play the USB; the Repeat/Program indicator will light solid. Press it again to cancel Repeat function; the indicator will turn off.VWXatakatU

— E14 —OperationPlaying Songs from the USB (Continued)12 PROGRAM: You can program up to 20 tracks for playback in any desired order. While in the Stop mode, press the PROG/REPEAT button; the Program indicator will blink and ”01” will appear on the display indicating the first program is ready to program. Select the first track using the Skip –/Navigationand Skip +/Navigationbuttons. Press the PROG/REPEAT button again to confirm the entry. Repeat to set up to 20 tracks into memory. When done, press the ENTER/PLAY/PAUSE button to start playback.Notes: • Press the STOP/PAIR button TWICE to stop and clear the program.• If more than 20 tracks are attempted to be programmed, “FUL” will appear in the display.13 PAUSE: During playback, if you wish to pause the music momentarily, press the ENTER/PLAY/PAUSE button; the Play/Pause indicator will blink. Press again to resume normal playback.14 Press the STOP/PAIR button to stop playback.15 Press the ON/OFF button to turn the unit off.alalamanao

— E15 —OperationUsing a Bluetooth Device1 Connect the unit as described previously. Press the ON/OFF button to turn the unit on.2 Repeatedly press the FUNCTION button to select the Bluetooth; “bt” will appear in the display. The unit automatically searches for and pairs a previously paired Bluetooth device (if previously paired). If no previously paired devices are present, connect as shown in the next step.Note: You can also press the STOP/PAIR button to disconnect any paired devices in order to pair another device. 3 Turn on your device’s Bluetooth option in settings to search for a discoverable device with a Bluetooth signal. Select “Singing Machine” from the device results on the Bluetooth menu. Note: Also refer to the user manual of your Bluetooth device for detailed instructions. 4 The Bluetooth indicator will light solid and a chime will sound.Notes: • If your Bluetooth prompts you for a passcode during the pairing process, please enter “0000” to connect. • On some Bluetooth devices, once pairing is complete, select your Bluetooth device as “Use as Audio Device” or similar.• If connection is lost after successful pairing, check to make sure the distance between speaker and Bluetooth-enabled device does not exceed 30 feet/10 meters.34uv

— E16 —OperationUsing a Bluetooth Device (Continued)5 Start playback of your bluetooth device. Press the ENTER/PLAY/PAUSE button during playback to pause the song. 6 Adjust the volume to a comfortable level using the MASTER VOLUME control on this unit as well as the volume on your Bluetooth device. 7 Connect microphone(s) and slide the ON/OFF switch on the microphone to the ON position.8 Press the MIC VOLUME + or –button as desired, which will affect both microphones.9 Press the ECHO + or – button to add an echo effect to your voice. 10 SKIP: Advance or go back one track by pressing the Skip –/Navigation and Skip +/Navigation buttons.yUWVX at

— E17 —OperationUsing a Bluetooth Device (Continued)11 RECORD YOUR VOCAL PERFORMANCE: To record your singing as well as the music, press the RECORD button. Recording will begin and the light around the RECORD button will light solid. When done recording, press the RECORD button again; the light around the RECORD button will turn off.Notes: • The recorded audio file will record onto the USB drive.• See "Playing Songs from the USB" section to play back your recorded files. 12 Press the ON/OFF button to turn the unit off.akal

— E18 —OperationUsing the AUX IN Jack1 Connect the unit as described previously. Press the ON/OFF button to turn the unit on. 2 Connect the external unit to the AUX IN Jack on the front of this unit. Connecting an external unit will allow the audio to be played through your Singing Machine.Notes:• It is highly recommended to set the volume on the auxiliary unit to 1/3 or lower to avoid distortion.• Skipping files/tracks is not possible in this unit when using an external device.3 Repeatedly press the FUNCTION button to select the AUX IN mode; “AU” will appear in the display. 4 Adjust the volume using the MASTER VOLUME control on this unit or your external device’s volume control.5 Connect microphone(s) and slide the ON/OFF switch on the microphone to the ON position.uwyxv

— E19 —OperationUsing the AUX IN Jack (Continued)6 Press the MIC VOLUME + or –button as desired, which will affect both microphones.7 Press the ECHO + or – button to add an echo effect to your voice. 8 RECORD YOUR VOCAL PERFORMANCE: To record your singing as well as the music, press the RECORD button. Recording will begin and the light around the RECORD button will light solid. When done recording, press the RECORD button again; the light around the RECORD button will turn off.Notes: • The recorded audio file will record onto the USB drive.• See "Playing Songs from the USB" section to play back your recorded files. 9 Press the ON/OFF button to turn the unit off.XUVW

— E20 —OperationTo purchase and download karaoke music, please visit http://store.singingmachine.com to access over 13,000+ of your favorite karaoke songs. You will need a USB flash drive (not included) to transfer the downloads to this unit. Follow these easy steps:1 Go to http://store.singingmachine.com using your internet browser, and then register.2 Select and purchase your favorite karaoke music from the Singing Machine Download Store.3 Download your selected purchase(s) from the Singing Machine Digital Locker to your USB flash drive.4 Insert the USB flash drive as shown on page E12 and enjoy!Where to Download MP3+G FilesFAQ• Where can I get additional help with the file formats? Visit http://singingmachine.com/smc-music/ to get additional resources about the right type of FILE FORMAT for your system.Helpful Hints:The .mp3 and .cdg files are delivered for download in a single, compressed MP3+G.zip file. The MP3+G file cannot be played as a .zip file on a USB flash drive. To play karaoke songs using a USB flash drive, the MP3+G .zip file must be unzipped as follows:• Connect a USB flash drive to your computer.• Download the MP3+G file from your Digital Locker and save the .zip* file to a folder on your computer.• Double click the .zip file to open the .zip (you will see the .mp3 and .cdg files).• Drag and drop the .mp3 and .cdg files to the USB flash drive.• Remove (eject) the USB flash drive from your computer.Turn on the Singing Machine and connect the USB flash drive.Note: Your downloaded songs can also be burned to a blank CDR/CDRW.

— E22 —SpecificationsAUDIOOutput Power .............................................................................................. 8 Watts (RMS) 10% THDOutput Impedance ........................................................................................................................4 OhmsCD SECTIONFrequency Response..................................................................................................... 100Hz - 20kHzSignal-to-Noise Ratio ................................................................................................... 50dB (A-WTD)Number of Programs ..........................................................20 Step Random Access ProgrammingBLUETOOTHBluetooth Version ..................................................................................................................V2.1 + EDRWorking Distance ..........................................Up to 30 feet/10 meters measured in open spaceUSBFormat ................................................................................................................................................FAT32Maximum Compatibility ..................................................................................................................32GBGENERALPower ....................................................................................................................DC9V Positive CenterDimensions - Main Unit ................................................... 297mm (W)x378mm (H)x216mm (D)Weight - Main Unit ......................................................................................................................... .2.2KgMicrophone ....................... -74 dB 600 Ohms impedance with 6.3 mm Dynamic MicrophoneAux In ..........................................................................................................................3.5mm Stereo JackSpecifications are subject to change without notice.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by The Singing Machine Company, Inc. is under license.Other trademarks and trade names are those of their respective owners.

Visit Our Website: www.singingmachine.comThe Singing Machine Company, Inc.4060 E Jurupa Street, Unit BOntario, CA 91761-1413 USACopyright © 2018 - All Rights Reserved.Droit d’auteur © 2018 Tous Droits Réservés.PRINTED IN CHINAIMPRIMÉ EN CHINE2088-18xx-EF-LA

Navigation menu