Texas Instruments TINAVWNA2 TI-Nspire CX Wireless Network Adapter v2 User Manual My

Texas Instruments Inc. TI-Nspire CX Wireless Network Adapter v2 My

Contents

TempConfidential_TINAVWNA2-UserGuide-Revised3

Setting up the TI-Nspire™ Navigator™ TeacherSoftwareThe TI-Nspire™ Navigator™ System provides the hardware and software toolsneeded to set up a wireless classroom network. In a wireless classroomenvironment, the TI-Nspire™ Navigator™ Teacher Software enables you to:• Use Quick Poll to send polls to students, receive student responses, andreview the poll results with students.• Use Screen Capture to capture screens from student handhelds orcomputers automatically, or at specific time intervals.• Use Live Presenter to display work as it is being performed on yourhandheld screen, or on a student handheld screen.• Use the Review Workspace to collect and review student assignments,watch results in real time as students answer questions, and analyze datafor the entire class or for individual students.About the HardwareDepending on classroom requirements, your TI-Nspire™ Navigator™ Systemmay include the following hardware, which is used to create a wirelesscommunications network so that your computer can communicate with studenthandhelds:HardwareName Image UseTI-Nspire™WirelessNetworkAdapterAttaches to the TI-Nspire™ CXand TI-Nspire™ CXCAShandhelds to enable wirelesscommunication over a 2.4GHzband.TI-Nspire™ CXWirelessNetworkAdapter –v2Attaches to the TI-Nspire™ CXand TI-Nspire™ CXCAShandhelds to enable wirelesscommunication over a 2.4GHz or5GHz band.Setting up the TI-Nspire™ Navigator™ Teacher Software 1DRAFT
2 Setting up the TI-Nspire™ Navigator™ Teacher SoftwareHardwareName Image UseTI-Nspire™Navigator™wireless cradleAttaches to all TI-Nspire™ CXand TI-Nspire™ handhelds toenable wireless communicationover a 2.4GHz band.TI-Nspire™Navigator™access pointConnects to the teachercomputer to provide a 2.4GHzwireless communication link.TI-Nspire™ CXNavigator™access pointConnects to the teachercomputer to provide either a2.4GHz or 5GHz wirelesscommunication link.DRAFT
Before You BeginWhen you launch a new version of the TI-Nspire™ Navigator™ TeacherSoftware for the first time, the TI-Nspire™ Navigator™ System Startup wizardopens and guides you through the automated process to set up your wirelessclassroom. Before you begin the wireless set up process:• Make sure you have installed and activated the TI-Nspire™ Navigator™Teacher Software on your computer.• If you are using TI-Nspire™ Navigator™ wireless cradles, make sure eachcradle is charged ( LEDis solid amber or solid green).Note:If you are using TI-Nspire™ wireless network adapters, you do notneed to charge them. The wireless network adapters are powered by thehandhelds.• Disconnect the TI-Nspire™ Navigator™ access point or TI-Nspire™ CXNavigator™ access point from your computer.Automated System StartupWhen you launch the software, the Startup wizard will guide you through thesteps needed to:• Update all student and classroom handhelds to the latest operating system(OS)version. The OS on the handhelds must match the software versioninstalled on your computer.Important! When updating the OS, handhelds must be connected to thecomputer using a USB cable or TI-Nspire™ CXDocking Station.• Connect the access point and, if needed, update the access pointfirmware.• Name the class network.• If required, select a channel for the access point.• Add wireless clients to your network.• Create a backup copy of the class network configuration.Setting up the TI-Nspire™ Navigator™ Teacher Software 3DRAFT
4 Setting up the TI-Nspire™ Navigator™ Teacher SoftwareCharging the CradlesThe TI-Nspire™ Navigator™ wireless cradles contain rechargeable batteries.You must charge the batteries overnight before using them in class. When thecradles are fully charged, they will function all day under continuous use. Youshould recharge them each night.The TI-Nspire™ Navigator™ Cradle Charging Bay can hold from one to fivecradles. After you place the cradles in the charging bay, they are chargedsimultaneously until all are fully charged. If the batteries are fully discharged, itmay take up to 12 hours to fully charge the batteries.Note: You cannot damage the batteries by leaving them in the charging baybeyond the time needed to fully charge them. Also, it is not necessary to fullydischarge the batteries before recharging them.Make sure you have enough (3 to 4) power outlets for the equipment youreceived. If necessary, obtain a power strip so that you have plenty of groundedoutlets.1. Insert the small end of the AC9940 power adapter cord into the chargingbay’s power jack.DRAFT
2. Plug the other end of the adapter into a power outlet.3. Insert each TI-Nspire™ Navigator™ Cradle into the TI-Nspire™ Navigator™Cradle Charging Bay. Make sure the LED is amber.Note: You can charge a single wireless cradle using an AC9926 adapter (soldseparately).Checking the LEDsTwo LEDs (small lights) at the top of each TI-Nspire™ Navigator™ wirelesscradle blink or change colors to indicate various operations or status.LEDsThe LED indicates network activity. The LED indicates battery-charging status.When the cradles are still in the TI-Nspire™ Navigator™ Cradle Charging Bay:• A solid amber LED means the wireless cradle is currently recharging.Setting up the TI-Nspire™ Navigator™ Teacher Software 5DRAFT
6 Setting up the TI-Nspire™ Navigator™ Teacher Software• A solid red LED means the wireless cradle does not have goodcontact with the charging bay. Reposition the cradle to establish goodcontact and the LED turns amber.• A solid green LED means the wireless cradle is fully charged.Updating the Handheld Operating SystemWhen installing or updating the TI-Nspire™ Navigator™ Teacher Software, theStartup dialog box opens when you launch the software for the first time. Youmust update all student and classroom handhelds to the latest operatingsystem.Complete the following steps to ensure all handhelds are updated.1. Disconnect the access point if it is connected to your computer.2. Connect the handhelds to the computer.DRAFT
You must connect handhelds using a USB cable or connect multiplehandhelds using TI-Nspire™ docking stations.3. Click Detect handheld OS.• If the OS for all connected handhelds matches the software version,the Handheld OS Update dialog box is displayed informing you thatall handhelds are up to date. Click Close to return to the Startup dialogbox.• If the OS on the connected handhelds is not current, the HandheldOSUpdate Required dialog box is displayed. Click Update OS.The Add to Transfer List dialog box opens.The matching OSfiles are transferred to the connected handhelds.You can update TI-Nspire™ CX handhelds and TI-Nspire™ handheldsat the same time. If you cannot connect all handhelds at one time,connect as many as possible and update the OS. After the OS updateis complete, disconnect the handhelds and repeat the OS updateprocess until all handhelds are updated. The software will detect theOS needed and begin the transfer as you connect the handhelds.• Click Done to stop the transfer process when all handhelds areupdated.Setting up the TI-Nspire™ Navigator™ Teacher Software 7DRAFT
8 Setting up the TI-Nspire™ Navigator™ Teacher Software- The Add OS Transfer List closes.- The Start Up dialog box is displayed.4. Select the All my handhelds are updated to version 3.6 check box.5. Click Next.The ConnectAccess Point dialog box opens.Connecting the TI-Nspire™ Navigator™ Access PointWhen the operating system update on all handhelds is complete, the next stepin the system startup process is to connect the access point. When you connectthe access point to your computer, it is powered on and ready to communicatewith wireless network adapters and cradles.1. Connect the access point to the computer using a USB cable.a) Connect the small end of the USB cable to the access point.Connect the access point directly to your computer. Do not connectthe access point to a USB hub or docking station.b) Connect the other end of the cable to the USB port on your computer.c) Make sure the access point power light is on. The power lightindicates that the access point is receiving power from the computer.The signal light indicates wireless link activity.DRAFT
TI-Nspire™ Navigator™ access point TI-Nspire™ CX Navigator™ access pointNote:If the software does not detect a connected access point within oneminute, an error message is displayed. Close the error message, and thendisconnect and reconnect the access point.2. Click Next.The software detects the access point type and checks the firmwareversion on the access point. If a newer firmware version is available, thesoftware updates the firmware.Note: It may take up to 60 seconds for the software to detect the accesspoint.Important! Do not stop the update process or disconnect the access pointuntil the firmware update is complete.When the update is complete, the software checks the access point for aconfigured classroom network.• If classes exist, the software asks if you want to keep the current setupor make changes.• If no classes exist, the Class Network Setup wizard opens.Note: You can set up a network at any time, or make edits to an existingnetwork, by using the Network Manager.TroubleshootingIf the firmware update fails, the OSWarning dialog box opens.Setting up the TI-Nspire™ Navigator™ Teacher Software 9DRAFT
10 Setting up the TI-Nspire™ Navigator™ Teacher SoftwareTo resolve the problem, disconnect and reconnect any cables connected to theaccess point, and the software will automatically start the update process. If thisdoes not resolve the issue, contact Customer Support.Confirming Handheld OS VersionIf you did not update handhelds during startup, the wizard asks you to confirmthat classroom and student handhelds are updated to the latest OSversion.The OS version on the handhelds must match the software version before youcan set up the class network.To check the OSversion on a handheld,DRAFT
1. Press cto turn the handheld on.2. Select Settings >Status to open the Handheld Status window.3. Make sure the OSon the handheld matches the software version on yourcomputer.• If the OS version is current, select Yes.• If the OS version is not current select No.4. Click Next.• If the OS version was not current, the Handheld OSUpdate Requireddialog box is displayed. Click Update OS to open the Add OSTransferTool and update the handhelds.• If the OS version is current, the Class Network Name dialog box opensand you can continue the process to set up the class network.Naming the Class NetworkWhen the Class Network Name dialog box opens, complete the following stepsto name your class network.Setting up the TI-Nspire™ Navigator™ Teacher Software 11DRAFT
12 Setting up the TI-Nspire™ Navigator™ Teacher Software1. Type the name you want to assign to the class network in the TI-NAV-Nfield.Use a name that is unique, easy to remember, and easy for you to identify.The class network name can be up to 22 characters long. Names canconsist of letters, numbers, and spaces; but cannot contain specialcharacters such as ?"$\![]+.2. Click Next to configure the access point with no changes.—or —3. Click Advanced to select a different band or operating channel.• If the TI-Nspire™ Navigator™ access point isconnected, you can select a different operating channel.DRAFT
• If the TI-Nspire™ CX Navigator™ access point is connected, youcan select either a 2.4GHz band or 5GHz band, and you can select adifferent operating channel.Note: Operating channels available for selection are determined by theinstalled software version.Setting up the TI-Nspire™ Navigator™ Teacher Software 13DRAFT
14 Setting up the TI-Nspire™ Navigator™ Teacher SoftwareImportant! If you are using the TI-Nspire™ CX Navigator™ network adapter–v2adapters, you can select either the 2.4GHz or 5GHz band. If you havea mixture of wireless network adapters, you must select the 2.4GHz band.4. Click Done.The Configuring the Access Point dialog box opens and the softwareconfigures the access point and applies the class network name.Important! Do not disconnect the access point while it is being configured.DRAFT
When the configuration process is complete, you can associate your wirelessclients.Adding Wireless Clients to the NetworkAfter you assign a name to your class network and the access points areconfigured, you must associate your wireless clients (wireless adapters andwireless cradles) with the network. How you complete this process depends onwhether you have docking stations that enable you to work with multiplehandhelds and wireless clients at one time.• If you have a docking station, attach the adapters to the handhelds, andthen insert the handhelds into a docking station that is connected to yourcomputer. You can link two additional docking stations to the connecteddocking station.• If you do not have a docking station, attach the wireless adapters orcradles to the handhelds.Setting up the TI-Nspire™ Navigator™ Teacher Software 15DRAFT
16 Setting up the TI-Nspire™ Navigator™ Teacher Software1. When the wireless adapters or cradles are attached to the handhelds, clickNext.The Add Wireless Clients to Class Network dialog box opens.The access point finds the available clients and lists them in the AvailableClients box. It can take up to six minutes for the access point to find allavailable clients. Check the number of available clients to ensure allclients are listed.DRAFT
2. Select the wireless clients you want to add to the class network.• To add all available clients listed, click Add All.• To add specific clients, select one client ID at a time, and then clickAdd.Important! Clients are not part of the class network until you complete thisstep to add them.3. Click Next to associate the wireless clients with the classroom network.Setting up the TI-Nspire™ Navigator™ Teacher Software 17DRAFT
18 Setting up the TI-Nspire™ Navigator™ Teacher SoftwareThe software associates the attached wireless clients with the classroomnetwork. When the process is complete, the Setup Complete dialog opens.4. Select Back up my class network to save a copy of your classroom networkconfiguration.The saved network information includes the list of wireless client IDs, thenetwork name, and the channel and country selected on the access point.Saving a network enables you to reload the configuration at a later timeusing the TI-Nspire™ Network Manager. By default, the file is saved in theMy Documents/TI-Nspire/Navigator Network folder.To finish without saving a backup copy, select Skip backup.DRAFT
5. Click Finish to complete the TI-Nspire™ Navigator™ System setup.Note:You can add more wireless adapters or cradles to the class network at alater time using the TI-Nspire™ NetworkManager.Connecting the Handhelds to the Wireless AdaptersThe wireless network adapters work with the TI-Nspire™ CX and TI-Nspire™ CXCAS handhelds. To connect the handheld to a wireless adapter, follow thesesteps.1. Position the wireless adapter on top of the handheld so the connector onthe adapter lines up with the connector on top of the handheld.ÀConnectorÁGuides for aligning with handheldÂGrooves to align wireless adapter2. Slide the adapter into position, making sure the guides on the sides of theadapter slide into the grooves on the sides of the handheld.3. Firmly press the adapter into place.Setting up the TI-Nspire™ Navigator™ Teacher Software 19DRAFT
20 Setting up the TI-Nspire™ Navigator™ Teacher SoftwareConnecting the Handhelds to CradlesThe wireless cradles work with the TI-Nspire™, TI-Nspire™ CAS, TI-Nspire™ CXand TI-Nspire™ CX CAS handhelds. To connect the handheld to a cradle,follow these steps.1. Slide the lock on the back of the cradle to the OFF position.DRAFT
2. To attach the handheld, face the screen upward and slide the handheldonto the top of the wireless cradle. Be sure that both sides of the handheldare inserted into both of the side guides.3. Press firmly to make a good connection. When properly connected, thehandheld appears to be sitting on top of the cradle.4. Lock the handheld in place by sliding the lock on the back of the cradle tothe ON position.Setting up the TI-Nspire™ Navigator™ Teacher Software 21DRAFT
22 Setting up the TI-Nspire™ Navigator™ Teacher Software5. Insert each cradle into the charging bay. Make sure the LED is amber.DRAFT
At the end of the school day, return the wireless cradle to the charging bay andcharge them overnight. The cradles are charged when all the (powerstatus) LEDs are solid green or amber.Creating and Managing Your Teacher AccountCreate your teacher account in the Teacher Preferences section of theTI-Nspire™ Navigator™ Teacher Software. A teacher account lets you log in tothe TI-Nspire™ Navigator™ network from your handheld. After you create ateacher account, you can later change your password or your user name.Creating Your Teacher Account1. Use the Workspace selector to choose the Class workspace.2. Click File> Settings> Teacher Preferences .The Teacher Preferences dialog box opens.3. Type a username.4. Type a password.5. Select or clear the preference for the teacher icon to appear in theclassroom view.If you select this preference, the teacher icon will appear in the classroomview, and you will be included as a recipient in Send to Class, Collect fromClass, and Delete from Class operations. The teacher handheld screenwill be included in screen captures of the class.Setting up the TI-Nspire™ Navigator™ Teacher Software 23DRAFT
24 Setting up the TI-Nspire™ Navigator™ Teacher Software6. Select or clear the options to randomize the order in Screen Capture, andto individualize the teacher handheld in Screen Capture.•Randomize order in Screen Capture. Selecting this option captures anddisplays student screens in a random order, not the order on the classlisting. This enables students to concentrate on the assignment, notwhose screen they are viewing.•Individualize Teacher Handheld in Screen Capture. Selecting this optionshows the teacher’s screen in the screen capture.7. Click OK.Changing the Password of Your Teacher Account1. Make sure you are not logged in to the TI-Nspire™ Navigator™ network onyour handheld.2. Click File> Settings> Teacher Preferences .The Teacher Preferences dialog box opens.3. Click Reset.TI-Nspire™ Navigator™ software clears the current password.DRAFT
4. Type a new password.5. Click OK.Changing the User Name of Your Teacher Account1. Make sure you are not logged in to the TI-Nspire™ Navigator™ network onyour handheld.2. Click File> Settings> Teacher Preferences .The Teacher Preferences dialog box opens.3. Enter a new user name.4. Click OK.Setting up the TI-Nspire™ Navigator™ Teacher Software 25DRAFT
26 Setting up the TI-Nspire™ Navigator™ Teacher SoftwareLogging In to the TI-Nspire™ Navigator™ System from theHandheldThe TI-Nspire™ Navigator™ classroom learning system uses both yourcomputer and student handhelds. For you and your students to communicateusing the TI-Nspire™ Navigator™ network, students must log in to the networkfrom their handhelds.Note: You do not have to log in to communicate with student handhelds; youcan use the Transfer Tool to delete files or send files and operating systems tostudent handhelds. However, if you plan to participate from your handheldduring the TI-Nspire™ Navigator™ class session, then you must log in to theTI-Nspire™ Navigator™ network from your handheld.For more information on using a handheld, refer to the handheld guidebooksavailable at education.ti.com/guides.Before you log in, make sure these items are ready:• You have created your teacher account in Teacher Preferences.• You have started a class session on your computer.• The TI-Nspire™ handheld is ready for login. (The icon isblinking.)Before your students log in, make sure you complete these items:• Create student accounts.• Provide students with the class network name, their user names and, ifnecessary, their passwords.Logging In to the TI-Nspire™ Navigator™ Network1. To log in, do one of the following:• From the Home screen of your TI-Nspire™ handheld, select5:Settings> 5:Login.• From a screen other than the Home screen, press ~> 8:Login.The last network the wireless client was associated with appears on thehandheld screen.Note: If the handheld is connected to the computer with the USB cable, nonetwork names appear on the screen, and you can continue logging in.DRAFT
2. If the name of the network that appears is correct, continue with login. If thenetwork is not correct, click Network.The handheld screens displays all networks it has been connected to, andalso displays other networks within range.3. Select the network from the list, and then click Connect.The login screen shows the connection status and displays the networkname when the connection is successful.4. Type your username and password.5. Select Login.The Login Successful screen opens.6. Click OK.Setting up the TI-Nspire™ Navigator™ Teacher Software 27DRAFT
28 Setting up the TI-Nspire™ Navigator™ Teacher SoftwareTI-Nspire™ Handheld Login Status IconsThe icons on the TI-Nspire™ CX, TI-Nspire™ CX CAS, TI-Nspire™, andTI-Nspire™ CAS handheld screens indicate the communication status betweenthe handheld and the access point, wireless adapter, wireless cradle, orTI-Navigator™ network. The icons indicate status as follows.Icon Status MeaningNoiconIf no icon appears on the handheld, thehandheld is not searching for an access point.Unattach and reattach the wireless adapter orcradle.Blinking The handheld is searching for an access point.Solid The handheld has found an access point.Solid The handheld is not communicating with theadapter or cradle. Remove the handheld fromthe adapter or cradle, wait for the icon todisappear, and then reattach the handheld tothe adapter or cradle.Blinking The handheld is connected to the network andis ready to login.Solid The handheld is logged in to the network.Storing the Wireless Adapters and CradlesWhen you charge the handhelds overnight, you can leave the wireless networkadapters attached to the handhelds before placing the handhelds in theTI-Nspire™ CX Docking Station. When you are ready to use the handhelds thenext morning, the handheld should be fully charged, and the adapter is readyfor use.You can remove the wireless adapter from the handheld, and store theadapters in the adapter storage case overnight.DRAFT
If you need to store the wireless adapters for more than two weeks, remove thewireless adapter from the handheld, and store the adapters in the adapterstorage case. Place the storage case in a cool, dry place.If you need to store the TI-Nspire™ Navigator™ wireless cradles for more thantwo weeks, remove the handhelds from the cradles, and store the cradles in acool, dry place. You cannot damage the batteries by leaving them in thecharging bay beyond the time needed to fully charge them, or by leaving themin the charging bay while the charging bay is unplugged.Using TI-Nspire™ Network ManagerAccessing the TI-Nspire™ Network Manager▶Click Tools >Network Manager.The TI-Nspire™ Network Manager opens.Note: Click Refresh at any time to refresh the TI-Nspire™ Network Managerwindow.Opening the Network Setup WizardYou can set up or edit a classroom network at any time using the NetworkSetup Wizard.▶In the TI-Nspire™ Network Manager window, click Network Setup Wizard.The wizard guides you through the process of setting up a classroomnetwork, including:Setting up the TI-Nspire™ Navigator™ Teacher Software 29DRAFT
30 Setting up the TI-Nspire™ Navigator™ Teacher Software• Update all student and classroom handhelds to the latest operatingsystem (OS)version. The OS on the handhelds must match thesoftware version installed on your computer.• Connect the access point and, if needed, update the access pointfirmware.• Name the class network.• If required, select a channel for the access point.• Add wireless clients to your network.• Create a backup copy of the class network configuration.Checking Network StatusThe network status is shown in the side bar of TI-Nspire™ Network Managerwindow.Note:If the sidebar is hidden, click View >Sidebar. Click Refresh to update thestatus if the Network Manager is already open.The network status shows the following information:•Access Point. Shows whether the AP is connected or disconnected.•Network Name. The name you gave the network when you set it up.•Channel. The access point operating channel for the current network.•Band. The selected communication link.•Firmware. The version of the access point.•MAC Address. The Media Access Control address that identifies the accesspoint.DRAFT
After you have set up the network, all of the adapters or cradles you addedappear in the TI-Nspire™ Network Manager window. If the wireless adapter orcradle is charged and attached to a TI-Nspire™ handheld that is powered on,TI-Nspire™ Network Manager shows the status as connected. It may take up to30 seconds to recognize the wireless client and show its status as connected.The status window also displays the battery status and signal strength.If the cradle is not charged, or the adapter or cradle is not connected to aTI-Nspire™ handheld that is powered on, TI-Nspire™ Network Manager displaysthe status as disconnected. TI-Nspire™ Network Manager remembers theadapter and cradle IDs you added, and the next time you turn on a handheldthat is connected to the adapter or cradle, TI-Nspire™ Network Managerrecognizes it.Cradle LEDsThe LEDs on each TI-Nspire™ Navigator™ wireless cradle use various colorsand blink patterns to indicate data activity or power status. This can occur eitherwhen the cradles are seated in the charging bay or when they are outside thecharging bay.The LEDs indicate status as follows.Activity LEDColor and pattern MeaningBlinking green Indicates data transfer to and from the access point.Battery (Power Status) LEDColorandpatternMeaningIn the charging baySetting up the TI-Nspire™ Navigator™ Teacher Software 31DRAFT
32 Setting up the TI-Nspire™ Navigator™ Teacher SoftwareColorandpatternMeaningSolidamberThe battery is charging.SolidgreenPower on; charged and powered by a charging bay or poweradapter.SolidredThe battery is charging, but does not have good contact with thecharging bay. Reposition the cradle so it has good contact. TheLED should then turn amber to indicate it is recharging.Outside the charging bayBlinkinggreenPower on; battery powered. The battery is 30% to 99% charged.BlinkingamberLow battery (less than 30% charged).BlinkingredBattery is critically low (less than 8% charged).Manually Adding Wireless ClientsYou can manually add wireless adapters or wireless cradles at any time.When you add a wireless adapter or cradle manually, it immediately appears inthe TI-Nspire™ Network Manager window.1. In the TI-Nspire™ Network Manager window, click Manually Add WirelessClient(s).The Add Wireless Clients by ID Number dialog box opens.DRAFT
2. For each wireless adapter or cradle you are adding, find the ID number onthe back of the adapter or cradle, and type it in the Wireless Client ID box.The ID is the last six digits of the eight-digit number (ignore the first twozeros).3. Enter a nickname in the Wireless Client Nickname box (optional).Nicknames can consist of letters, spaces, and numbers. A nickname mustcontain a minimum of 1 character and can contain a maximum of 64characters.4. Click Add Next to add another adapter or cradle if you have more than onewireless client to add.5. When you are finished adding all the adapters and cradles, click Finish.After you manually add wireless clients, you need to associate them to thenetwork using the handhelds.6. Turn on each TI-Nspire™ handheld.7. Attach the wireless adapter or the wireless cradle to each handheld. (Seethe instructions for connecting wireless adapters or cradles to a TI-Nspire™handheld.)8. From the Home screen of the TI-Nspire™ handheld, select 5:Settings>6:Network.The handheld lists the available networks that are within range.Setting up the TI-Nspire™ Navigator™ Teacher Software 33DRAFT
34 Setting up the TI-Nspire™ Navigator™ Teacher Software9. Select the network you added the wireless clients to, and click Connect.The wireless clients are now associated with the access point.Changing the Operating Channel1. In the TI-Nspire™ Network Manager window, click Change OperatingChannels.The Advanced Access Point Options dialog box opens.DRAFT
Important! If you are using the TI-Nspire™ CX Navigator™ network adapter–v2adapters, you can select either the 2.4GHz or 5GHz band. If you havea mixture of wireless network adapters, you must select the 2.4GHz band.2. Select a different channel from the drop-down box.3. Click Done.The Configuring the Access Point dialog box opens and the softwareconfigures the access point.Saving a Network SetupSaving a network setup enables you to reload the configuration at a later timeusing the TI-Nspire™ Network Manager. The saved network informationincludes the list of wireless client IDs, the network name, and the channel andcountry selected on the access point. By default, the file is saved in the MyDocuments/TI-Nspire/Navigator Network folder.1. In the TI-Nspire™ Network Manager window, click Actions >Save NetworkSetup.The Save dialog box opens.2. Name the network and then click Save. You can save the file to anotherlocation, if desired.Reusing a Saved NetworkReusing a saved network enables you to reload the configuration of a savednetwork. Reusing a network can save time because you do not have to set upthe network again.1. In the TI-Nspire™ Network Manager window, click Actions >Apply SavedNetwork Setup.The Apply a Network dialog box opens.2. Select the network and then click Apply a Network.3. The access point is configured with the saved network configuration.Identifying Wireless ClientsTo identify wireless clients that are not responding, complete the followingsteps.1. From the list of hardware components in the TI-Nspire™ Network Managerwindow, click to select the wireless clients. To select more than oneSetting up the TI-Nspire™ Navigator™ Teacher Software 35DRAFT
36 Setting up the TI-Nspire™ Navigator™ Teacher Softwarewireless client, press and hold the Shift or Ctrl key (Mac®:“key), andclick the items you want to select.2. Click Actions > Identify Selected.3. Look around your classroom.• If you are using cradles, both LEDs on the cradles that you selectedwill blink rapidly with a green color.• If you are using a docking station, both LEDs on the docking stationwill blink rapidly with a green color.You can identify the wireless clients that are not working because theirLEDs are not blinking.Now that you know where the non-working wireless clients are, you can addthem to the network again.Removing Wireless ClientsTo remove adapters or cradles from the class network, complete the followingsteps.1. In the TI-Nspire™ Network Manager window, select the wireless adaptersand cradles that you want to remove from the network.2. Click Actions > Removed Selected, or click .3. When prompted, click Remove.The selected wireless clients are removed from the list.Resetting the Access Point to Factory Default Settings1. In the TI-Nspire™ Network Manager window, click Actions > Set DefaultFactory Settings to Access Point.The access point is reconfigured to the default factory settings.2. Click OKwhen the confirmation message is displayed.DRAFT
USA FCC Information Concerning RadioFrequency InterferenceProduct Name FCCIDTI-Nspire™ Navigator™ Wireless Cradle V7R-TINAVWC2TI-Nspire™ Navigator™ Access Point V7R-TINAVAP2TI-Nspire™ CX Wireless Network Adapter V7R-TINAVWNATI-Nspire™ CX Navigator™ Access Point V7R-TINAVAP3TI-Nspire™ CX Navigator™ Wireless Network Adapter –v2V7R-TINAVWNA2Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more ofthe following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.FCC Caution: The following products comply with Part 15 of the FCC Rules.• TI-Nspire™ CX Wireless Network Adapter• TI-Nspire™ CX Wireless Network Adapter – v2• TI-Nspire™ Navigator™ Wireless Cradle• TI-Nspire™ Navigator™ Access Point• TI-Nspire™ CX Navigator™ Access PointUSA FCC Information Concerning Radio Frequency Interference 37DRAFT
0.433W/kg0.944W/kg0.995W/kg0.685W/kg0.455W/kg38 USA FCC Information Concerning Radio Frequency InterferenceOperation is subject to the following two conditions: (1) These devices may notcause harmful interference, and (2) these devices must accept any interferencereceived, including interference that may cause undesired operation.The device for the band 5150-5250 MHz is only for indoor usage to reducepotential for harmful interference to co-channel mobile satellite systems.RF Radiation Exposure and Hazard Statement:To ensure compliance with Federal Communications Commission (USA)requirements, (SAR limit is 1.6 W/kg averaged over one gram of tissue), theproducts listed in the following table have been evaluated under FCC BulletinOET 65C and found to be compliant with the requirements in 47 CFR Part2.1093 for RF exposure from radio frequency devices. The highest SAR valuereported under this standard during product certification when worn on thebody:Product Name SARValueTI-Nspire™ Navigator™ Wireless CradleTI-Nspire™ Navigator™ Access PointTI-Nspire™ CX Wireless Network AdapterTI-Nspire™ CX Navigator™ Access PointTI-Nspire™ CX Navigator™ Wireless Network Adapter –v2Using higher gain antennas and types of antennas not covered under the FCCcertification of this product is not allowed. Installers of the radio and end usersof the product must adhere to the installation instructions provided in thismanual.This transmitter must not be co-located or operating in conjunction with anyother antenna or transmitter.Non-modification Statement:Use only the integral antenna supplied by the manufacturer when operatingthese devices. Unauthorized antennas, modifications, or attachments coulddamage the TI-Nspire™ Navigator™ Cradle, TI-Nspire™ Navigator™ AccessPoint, TI-Nspire™ CX Wireless Network Adapter, TI-Nspire™ CX Navigator™Access Point, or TI-Nspire™ CX Navigator™ Network Adapter –v2and violateFCC regulations. Any changes or modifications not expressly approved by theparty responsible for compliance could void the user's authority to operate thisequipment.DRAFT
Deployment Statement:This product is certified for indoor deployment only. Do not install or use thisproduct outdoors.FCC StatementNote: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of thefollowing measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Modifications not expressly approved by the manufacturer could void the user’sauthority to operate the equipment under FCC rules.USA FCC Information Concerning Radio Frequency Interference 39DRAFT
0.685W/Kg0.433W/Kg0.944W/kg0.995W/kg0.455W/kg40 Canadian IC InformationCanadian IC InformationProduct Name ICTI-Nspire™ Navigator™ Wireless Cradle 451E-TINAVWC2TI-Nspire™ Navigator™ Access Point 451F-TINAVAP2TI-Nspire™ CX Wireless Network Adapter 451E-TINAVWNATI-Nspire™ CX Navigator™ Access Point 451F-TINAVAP3TI-Nspire™ CX Navigator™ Wireless Network Adapter –v2451F-TINAVWNA2Industry Canada Statement:This device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions:1. This device may not cause interference, and2. This device must accept any interference, including interference that maycause undesired operation of the device.To ensure compliance with Industry Canada requirements, (SAR limit is1.6 W/kg averaged over one gram of tissue), these products have beenevaluated and found compliant in accordance with Industry Canada RSS-102 with respect to the Safety Code 6 for Human Exposure to RF Fields.The highest SAR value reported under this standard during productcertification when worn on the body:Product Name SARValueTI-Nspire™ Navigator™ Wireless CradleTI-Nspire™ Navigator™ Access PointTI-Nspire™ CX Wireless Network AdapterTI-Nspire™ CX Navigator™ Access PointTI-Nspire™ CX Navigator™ Wireless Network Adapter –v2Equipment (or its transmit antenna) that is installed outdoors is subject tolicensing and not supported by the listed products.More information may be found in RSS-102 (http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html) and in Canada’sDRAFT
0.433W/Kg0.685W/Kg0.944W/kg0.995W/kg0.455W/kgSafety Code 6 (http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct-eng.php).Under Industry Canada regulations, this radio transmitter may only operateusing an antenna of a type and maximum (or lesser) gain approved for thetransmitter by Industry Canada. To reduce potential radio interference to otherusers, the antenna type and its gain should be so chosen that the equivalentisotropically radiated power (e.i.r.p.)is not more than that necessary forsuccessful communication.The device for the band 5150-5250 MHz is only for indoor usage to reducepotential for harmful interference to co-channel mobile satellite systems.Industrie Canada Déclaration :Ce dispositif est conforme à la norme (s) RSS de la licence-exonéré IndustrieCanada. Opération est soumise aux deux conditions suivantes :1. Ce dispositif ne peut pas causer de brouillage, et2. Ce dispositif doit accepter toute interférence, y compris le brouillage quipeut causer intempestif de fonctionnement du dispositif.Pour assurer la conformité avec les exigences d'Industrie Canada, (limitede Das est de 1,6 W/kg en moyenne pour un gramme de tissu), cesproduits ont été évalués et jugés conformes conformément à IndustrieCanada, CNR-102 en ce qui concerne le Code de sécurité 6 pourl'exposition humaine aux champs RF. La valeur SAR la plus élevéesignalée en vertu de cette norme lors de la certification du produit lorsqu'ilest porté sur le corps :Nom du produit SARVerdienTI-Nspire™ Navigator™ Wireless CradleTI-Nspire™ Navigator™ Access PointTI-Nspire™ CX Wireless Network AdapterTI-Nspire™ CX Navigator™ Access PointTI-Nspire™ CX Navigator™ Wireless Network Adapter –v2Équipement (ou son antenne de transmission) qui est installé à l'extérieur estsoumis à licence et pas pris en charge par les produits énumérés.Canadian IC Information 41DRAFT
42 Canadian IC InformationOn trouvera plus d'informations dans le CNR-102(http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html) et dans Code desécurité 6 notre (http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct-eng.php).En vertu de la réglementation d'Industrie Canada, cet émetteur radio risquerauniquement à l'aide d'une antenne de type et de gain maximum (ou moins)pour l'émetteur a été approuvé par Industrie Canada. Pour réduire lesinterférences radio potentielles à d'autres utilisateurs, le type d'antenne et songain doivent être choisie que la puissance isotrope rayonnée équivalente(p.i.r.e.) n'est pas plus que celui nécessaire à une communication efficace.Le dispositif pour la bande 5150-5 250 MHz est seulement pour utilisationintérieure réduire le risque de brouillage préjudiciable aux systèmes mobilespar satellite dans la même voie.DRAFT
Mexico - Declaration of ConformityMarking by this symbol:indicates that the following listed equipment meets the operating conditionsand technical characteristics established in the Mexican Official StandardNOM-121-SCT1-2009 radio systems using spread spectrum technique-hopping radio equipment frequency and digital modulation operating in thebands 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz.• TI-Nspire™ Navigator™ Access Point• TI-Nspire™ Navigator™ Wireless Cradle• TI-Nspire™ CX Wireless Network Adapter• TI-Nspire™ CX Navigator™ Access PointMexico - Declaration of Conformity 43DRAFT
44 European Union and EFTA Regulatory ComplianceEuropean Union and EFTA RegulatoryComplianceThis equipment may be operated in the countries that comprise the membercountries of the European Union and the EFTA(European Free TradeAssociation). These countries, listed in the following paragraph, are referred toas The European Community throughout this document:AUSTRIA, BULGARIA, CZECH REPUBLIC, DENMARK, FINLAND, FRANCE,GERMANY, GREECE, IRELAND, ITALY, LUXEMBOURG, NETHERLANDS,NORWAY, PORTUGAL, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN,SWITZERLAND, UNITED KINGDOMThe TI-Nspire™ Navigator™ Access Point communicates with either aTI-Nspire™ Navigator™ wireless cradle or TI-Nspire™ CX Wireless NetworkAdapter via a wireless 802.11b/g link to provide wireless local area networking(WLAN) capabilities and with a personal computer using a USB cable.TI-Nspire™ Navigator™ Access Point includes one 802.11b/g/n radio.The TI-Nspire™ Navigator™ CXAccess Point communicates with either aTI-Nspire™ Navigator™ wireless cradle, TI-Nspire™ CX Wireless NetworkAdapter, or TI-Nspire™ CX Wireless Network Adapter –v2via a wireless802.11b/g link to provide wireless local area networking (WLAN) capabilitiesand with a personal computer using a USB cable. TI-Nspire™ NavigatorCXAccess Point supports 2.412GHz to 2.462GHz for 802.11b/g/n 2.4GHzoperation + 5.150 GHz to 5.250GHz for 802.11 a/n 5GHz operation.Declaration of ConformityMarking by this symbol:indicates compliance with the Essential Requirements of the R&TTE Directiveof the European Union (1999/5/EC).This equipment meets the following conformance standards:Safety: EN 60950-1:2006 + A11:2009EMC: EN 55022:2006, EN 55024:1998 + A1:2001 + A2:2003, N 301 489-1V1.8.1/2008-4, EN 301 489-17 V2.1.1/2009-5, CISPR22:1997, CISPR24DRAFT
Including: EN 61000-3-2, -3-3, -4-2, -4-3, -4-4, -4-5, -4-6 and -4-11. The productis also licensed as required for additional country specific standards asrequired for the International Marketplace.Radio: EN 300-328 v.1.7.1 (2006-10)Electromagnetic compatibility and Radio spectrum Matters (ERM); Widebandtransmission systems; Data transmission equipment operating in the 2,4 GHzISM band and using wide band modulation techniques. Certifications areharmonized to the EN standards covering essential requirements under article3.2 of the R&TTE Directive. Compliance includes testing with the suppliedintegral antenna.SAR: EN62209-2:2010European Community Declaration of ConformityHereby, Texas Instruments declares that the following products are incompliance with the essential requirements and other relevant provisions ofDirective 1999/5/EC.• TI-Nspire™ Navigator™ Access Point• TI-Nspire™ Navigator™ Wireless Cradle• TI-Nspire™ CX Wireless Network Adapter• TI-Nspire™ CX Wireless Network Adapter –v2• TI-Nspire™ CX Navigator™ Access PointEnglish Hereby, Texas Instruments declares that the TI-Nspire™Navigator™ Access Point, TI-Nspire™ Navigator™ wireless cradle,and TI-Nspire™ CX Wireless Network Adapter, TI-Nspire™ CXWireless Network Adapter -v2, and TI-Nspire™ CX Navigator™Access Point are in compliance with the essential requirementsand other relevant provisions of Directive 1999/5/EC.The Declaration of Conformity may be consulted in the ProductStewardship page at education.ti.com.България Texas Instruments декларира, че TI-Nspire™ Navigator™ точказа достъп, безжичен люлка TI-Nspire™ Navigator™ и TI-Nspire™CX безжична мрежова карта, TI-Nspire™ CX безжичнамрежова карта -v2и точка за достъп на TI-Nspire™ CXNavigator™ са в съответствие с основните изисквания идругите съответни разпоредби на Директива 1999/5/ЕО.European Union and EFTA Regulatory Compliance 45DRAFT
46 European Union and EFTA RegulatoryComplianceДекларацията за съответствие може да бъде консултиран встраницата на продукта стопанисване в education.ti.com.ČeskárepublikaTexas Instruments tímto prohlašuje, že TI-Nspire™ Navigator™přístupový bod, bezdrátový stojan TI-Nspire™ Navigator™ aTI-Nspire™ CX bezdrátový síťový adaptér, TI-Nspire™ CXbezdrátový síťový adaptér -v2a TI-Nspire™ CX Navigator™přístupový bod jsou v souladu se základními požadavky adalšími příslušnými ustanoveními směrnice 1999/5/ES.Prohlášení o shodě může být konzultován v na stránce ProductStewardship education.ti.com.Dansk Texas Instruments erklærer hermed, at TI-Nspire™ Navigator™adgangspunktet, den trådløse TI-Nspire™ Navigator™ holder,den TI-Nspire™ CXNavigator™ adgangspunktet, den trådløseTI-Nspire™ CX netværksadapter og den trådløse TI-Nspire™ CXnetværksadapter -v2er i overensstemmelse med de essentiellekrav og andre relevante bestemmelser i direktiv 1999/5/EF.Du kan læse overensstemmelseserklæringen påproduktforvaltningssiden på education.ti.com.Norsk Texas Instruments erklærer herved at TI-Nspire™ Navigator™tilgangspunkt, TI-Nspire™ CXNavigator™ tilgangspunkt,TI-Nspire™ Navigator™ trådløs bordholder, TI-Nspire™ CXWireless Network Adapter og TI-Nspire™ CX Wireless NetworkAdapter -v2overholder de vesentlige kravene og andrerelevante bestemmelser i direktivet 1999/5/EC.Samsvarserklæringen kan leses på siden Produktforvaltning påeducation.ti.com.Suomi Texas Instruments vakuuttaa, että TI-Nspire™ Navigator™-liityntäpiste, TI-Nspire™ CXNavigator™-liityntäpiste, langatonTI-Nspire™ Navigator™-kelkka, TI-Nspire™ CX Wireless NetworkAdapter ja TI-Nspire™ CX Wireless Network Adapter -v2täyttävät direktiivin 1999/5/EY oleelliset vaatimukset ja ja muutasianmukaiset ehdot.Vaatimustenmukaisuusvakuutus on tarkasteltavissatuotevastuusivulla osoitteessa education.ti.com.Français Texas Instruments déclare que le point d’accès TI-Nspire™DRAFT
Navigator™, le point d’accès TI-Nspire™ CX Navigator™, le soclede synchronisation TI-Nspire™ Navigator™, l’adaptateur deréseau sans fil TI-Nspire™ CX et l’adaptateur de réseau sans filTI-Nspire™ CX -v2sont conformes aux exigences essentielles etaux autres clauses applicables de la Directive 1999/5/CE.La Déclaration de conformité peut être consultée à la pageGérance du produit à education.ti.com.Deutsch Texas Instruments erklärt hiermit, dass der TI-Nspire™Navigator™ Zugangspunkt, TI-Nspire™ CXNavigator™Zugangspunkt, die drahtlose TI-Nspire™ Navigator™Basisstation, der drahtlose TI-Nspire™ CX Netzwerkadapterdrahtlose und der TI-Nspire™ CX Netzwerkadapter -v2mit denwesentlichen Anforderungen und anderen relevantenBestimmungen der Richtlinie 1999/5/EG konform sind.Die Konformitätserklärung kann auf der Seite “Engagement fürdie Umwelt” unter education.ti.com angezeigt werden.Ελλάδα Με την παρούσα, Texas Instruments δηλώνει ότι το σημείοπρόσβασης TI-Nspire™ Navigator™, ασύρματο λίκνο πλοηγόςTI-Nspire™ και TI-Nspire™ CX ασύρματο προσαρμογέα δικτύου,TI-Nspire™ CX ασύρματο προσαρμογέα δικτύου - v2, και σημείοπρόσβασης TI-Nspire™ CX Navigator™ είναι σύμφωνα με τιςβασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας1999/5/εκ.Δήλωσης συµµόρφωσης μπορούν να συμβουλεύονται στησελίδα Διαχείριση προϊόντων στο education.ti.com.Italiano Con la presente, Texas Instruments dichiara che il punto diaccesso TI-Nspire™ Navigator™, il punto di accesso TI-Nspire™CXNavigator™, la base di ricarica wireless TI-Nspire™Navigator™, la basetta wireless TI-Nspire™ CX e la basettawireless TI-Nspire™ CX -v2sono conformi ai requisitifondamentali e ad altri provvedimenti della Direttiva 1999/5/CE.È possibile consultare la Dichiarazione di conformità alla paginaProduct Stewardship (Gestione responsabile del prodotto),all’indirizzo education.ti.com.Nederlands Hierbij verklaart Texas Instruments dat het TI-Nspire™European Union and EFTA Regulatory Compliance 47DRAFT
48 European Union and EFTA RegulatoryComplianceNavigator™ accesspoint, de TI-Nspire™ CX Navigator™accesspoint, de TI-Nspire™ Navigator™ draadloze slede, deTI-Nspire™ CX draadloze netwerkadapter en de TI-Nspire™ CXdraadloze netwerkadapter -v2voldoen aan de essentiëlevereisten en andere relevante bepalingen van Richtlijn1999/5/EC.De verklaring van overeenstemming kan worden geraadpleegdop de pagina Product Stewardship (Productbeheer) opeducation.ti.com.Português A Texas Instruments declara, pela presente, que o ponto deacesso TI-Nspire™ Navigator™, o ponto de acesso TI-Nspire™CXNavigator™, a base sem fios TI-Nspire™ Navigator™, oadaptador de rede sem fios TI-Nspire™ CX e o adaptador derede sem fios TI-Nspire™ CX -v2estão em conformidade com osrequisitos essenciais e outras disposições relevantes daDirectiva 1999/5/CE.A Declaração de Conformidade pode ser consultada na páginaAdministração do Produto em education.ti.com.Español Mediante el presente documento, Texas Instruments declaraque el punto de acceso TI-Nspire™ Navigator™, el punto deacceso TI-Nspire™ Navigator™ CX, el soporte inalámbricoTI-Nspire™ Navigator™, el adaptador de red inalámbricaTI-Nspire™ CX y el el adaptador de red inalámbrica TI-Nspire™CX -v2cumplen con los requisitos esenciales y otrasdisposiciones relevantes de la directiva 1999/5/CE.Puede consultar la declaración de conformidad en la páginaAdministración de producto en education.ti.com.Svenska Texas Instruments deklarerar härmed att TI-Nspire™ Navigator™anslutningspunkt, TI-Nspire™ CX Navigator™ anslutningspunkt,TI-Nspire™ Navigator™ trådlös tillkopplingsenhet, TI-Nspire™ CXtrådlös nätverksadapter och TI-Nspire™ CX trådlösnätverksadapter -v2uppfyller de väsentliga kraven och övrigarelevanta bestämmelser enligt direktivet 1999/5/EG.Deklarationen om överensstämmelse kan läsas på sidanProduktansvar på webbplatsen education.ti.com.DRAFT
Slovensko Texas Instruments vyhlasuje, že TI-Nspire™ Navigator™ AccessPoint, bezdrôtový kolísky TI-Nspire™ Navigator™ a TI-Nspire™ CXbezdrôtový sieťový adaptér, TI-Nspire™ CX bezdrôtový sieťovýadaptér -v2a TI-Nspire™ CX Navigator™ prístupový bod sú vsúlade so základnými požiadavkami a inými príslušnýmiustanoveniami smernice 1999/5/EC.Vyhlásenie o zhode k nahliadnutiu na stránke produktusprávcovstvo v education.ti.com.Slovenija Texas Instruments izjavlja, da TI-Nspire™ Navigator™ dostopnotočko, TI-Nspire™ Navigator™ wireless zibelka in TI-Nspire™ CXbrezžično omrežno kartico, TI-Nspire™ CX brezžično omrežnokartico -v2in TI-Nspire™ CX Navigator™ vstopne točke so vskladu z bistvenimi zahtevami in drugimi ustreznimi doloèbamiDirektive 1999/5/ES.Izjava o skladnosti se lahko posvetuje nadzor izdelkov na stranieducation.ti.com.Countries of Operation and Restrictions of Use in the EuropeanCommunityOperation Using the 2.400 to 2.4835 GHz Channels in the EuropeanCommunityThe installer and/or end user should use the configuration utility provided withthis product to verify the current channel of operation, the expected transmitpower level, and to confirm that the device is operating in conformance with thespectrum usage rules for the selected European Community country. Ifoperation is occurring outside of the allowable channels as indicated in thisguide, then operation of the product must cease immediately and the installermust consult with the local technical support staff responsible for the wirelessnetwork.These devices are intended to be operated in all countries of the EuropeanCommunity. The frequencies associated with channels 1 to 13 in the 2.400 to2.4835 GHz band are allowed to be used either indoors or outdoors in allcountries of the European Community, except where noted:• In Greece, Italy, Latvia, and Spain, the end-user must apply for a licensefrom the national spectrum authority to operate this device outdoors.European Union and EFTA Regulatory Compliance 49DRAFT
50 European Union and EFTA RegulatoryCompliance• Please consult the TI-Nspire™ Navigator™ Teacher Software Guidebook forfurther information regarding restrictions and operating conditions foroutdoor configurations.DRAFT
China SRRC CMIIT IdentificationProduct Name CMIIT IDTI-Nspire™ Navigator™ Wireless Cradle 2010DJ5746TI-Nspire™ Navigator™ Access Point 2012DJ1441TI-Nspire™ CX Wireless Network Adapter 2011DJ1546TI-Nspire™ CX Navigator™ Access Point TBDTI-Nspire™ CX Navigator™ Wireless Network Adapter –v2TBDChina SRRC CMIIT Identification 51DRAFT
52 Warning StatementsWarning StatementsWarning! Install the TI-Nspire™ Navigator™ Access Point or TI-Nspire™ CXNavigator™ Access Point in such a manner as to maintain a minimum of 20 cm(7.9 inches) separation distance between the radiating element(s) and allpersons. This safety warning conforms to FCC radio frequency exposure limits.Warning! Do not touch or move the TI-Nspire™ Navigator™ Access Point or orTI-Nspire™ CX Navigator™ Access Point when the antennas are transmitting orreceiving.Warning! The TI-Nspire™ Navigator™ Access Point, TI-Nspire™ Navigator™Wireless Cradle, TI-Nspire™ CX Wireless Network Adapter, TI-Nspire™ CXNavigator™ Access Point, and TI-Nspire™ CX Wireless Network Adapter -v2are intended for indoor use only. Do not install the device nor operate itoutdoors.Warning! Intentional radiators, such as the TI-Nspire™ Navigator™ AccessPoint, TI-Nspire™ Navigator™ Wireless Cradle, TI-Nspire™ CX Wireless NetworkAdapter. TI-Nspire™ CX Navigator™ Access Point, and TI-Nspire™ CX WirelessNetwork Adapter -v2are not intended to be operated with any antenna(s) otherthan those furnished by Texas Instruments. An intentional radiator may only beoperated with the antenna(s) with which it is authorized.Warning! The TI-Nspire™ Navigator™ Access Point radio(s) and TI-Nspire™ CXNavigator™ Access Point radio(s) are disabled by default and can be enabledonly by the system administrator using the Management software application.Warning! The radio frequency band, operating channels, and transmit powerdepend on the country of operation specified by the system administratorduring setup and configuration using the Management software.Warning! Only qualified personnel must perform installation. Read and followall warning notices and instructions marked on the product or included in thedocumentationDRAFT
Important for Safe AC Adapter OperationIn addition to the careful attention devoted to quality standards in themanufacture of your TI product, safety is a major factor in the design of everyproduct. However, safety is your responsibility as well. This section listsimportant information that will help assure your enjoyment and proper use ofthis TI product and accessory equipment. Please read it carefully beforeoperating and using your product.Installation• Read and follow Instructions: You should read all the safety and operatinginstructions before operating the product. Follow all operating instructions.• Retain Instructions: You should save all the safety and operatinginstructions for future reference.• Heed Warnings: Comply with all warnings on the product and in theoperating instructions.• Use the Recommended AC adapter: You must use the adapter that comeswith your product.• Check Power Sources: The AC adapter for your TI product must be usedwith an AC100V-230V 50Hz/60Hz supply outlet. If you are not sure of thetype of power supplied to your home, consult your dealer or local powercompany.• Be Careful of Overloading: Do not overload wall outlets or extension cords,as this can result in a risk of fire or electric shock. Overloaded AC outlets,extension cords, frayed power cords, damaged or cracked wire insulation,and broken plugs are dangerous. Periodically examine the cord, and if itsappearance indicates damage or deteriorated insulation, have it replacedby your service technician.• Protect Power Cords: Route power supply cords so that they are not likelyto be walked on or pinched by items placed upon or against them. Payparticular attention to cords where they are attached to plugs andconvenience receptacles, and examine the point where the power cordattaches to the TI product.• Check Ventilation: Slots and openings in the enclosure are provided forventilation to ensure reliable operation of the TI product and to protect itfrom overheating. Do not block or cover these openings. Never block theseopenings by placing the TI product on a bed, sofa, rug, or other similarImportant for Safe AC Adapter Operation53DRAFT
54 Important for Safe AC Adapter Operationsurface. Never place the TI product near or over a radiator or heat register,or any other head source (including amplifiers). Do not place the TIproduct in a built-in installation, such as a bookcase or equipment rack,unless you provide proper ventilation.• Do Not Use Accessories: Do not use attachments, unless they arerecommended by TI, as they may cause electrical or fire hazards.• Do Not Use Near Water: Do not use the TI product near water; for example,near a bathtub, sink or laundry tub, in a wet basement or near a swimmingpool.• Do Not Place Near a High Temperature Source: Do not use the TI productnear a source of heat such as a kitchen range, a fireplace, or a radiator.• Use Caution in Mounting the TI Product: Do not place the TI product on anunstable surface. The TI product may fall, causing serious injury to a childor adult, as well as serious damage to the TI product.• Do Not Use Near Medical Equipment: Do not operate the product nearequipment that is susceptible to electrical interference, or is used formedical purposes. Do not use the product near a pacemaker or a patientcare area in a hospital.Important Information• Wait at least 10 seconds between disconnecting and reconnecting the TIproduct with the AC power adapter.• Unplug the product from the wall outlet carefully, as the AC adapter maybe hot.Use and Maintenance• Unplug Power Before Cleaning: Do not used liquid or aerosol cleaners.Use a damp cloth for cleaning.• Keep Objects Out of Openings: Never push objects of any kind into the TIproduct through openings such as the ventilation holes, as they may touchhigh voltage circuits and "short out" parts, which could result in a fire orelectric shock. Never spill liquid on the TI product.• Protect From Lightning: Unplug the TI product during a lightning storm, orwhen leaving it unattended and unused for a long period. Remove thepower adapter from the wall outlet, and disconnect the cable system. Thiswill prevent damage to the TI product due to lightning and power linesurges. Take care not to touch the metal portion of the TI product or cablesin a lightning storm.DRAFT
Service• Refer Servicing to Qualified Service Personnel under the ConditionsListed Below:- If the power supply cord or plug is damaged.- If liquid has been spilled or objects have fallen into the product.- If the product has been exposed to rain or water.- If the product does not operate normally as per the operatinginstructions.- If the product has been dropped or the case has been damaged.- When the product exhibits a distinct change in operation, such as theinability to complete its self-check.• Require Safety Check: Upon completion of any service or repairs to theproduct, ask the service technician to perform the recommended safetychecks to verify that the product is in a safe operating condition.Important for Safe AC Adapter Operation55DRAFT

Navigation menu