TeraValue NEWGEN5 MP3 Player User Manual

TeraValue Co., Ltd. MP3 Player Users Manual

User Manual

2CCoonntteennttss1CCooppyyrriigghhtt NNoottiicceeTeraValue reserves all copyrights of this Users Guide. Copyingand using partial or entire part of this Users Guide withoutpermission of TeraValue is strictly prohibited.- Disconnecting the USB cable while upgrading the firmware will cause a critical damage to the product. - If the user formats a memory in PC Window, a critical damage may be caused in this device. - For Win98 OS, install Win98 driver included in the provided CD before using the product. (refer to 10 page)◐◐Notes- Bit Rate / 31- Sample Frequency / 31 󳀨Encoding from External Device / 32- Sync Function / 32- Sample Frequency / 32- Silence Level / 33- Line In Volume / 33󳀨Music Source / 34󳀨LCD Contrast level Control / 34󳀨Language Selection / 35󳀨Internal/External Memory Capacity / 35󳀨Memory Format / 36󳀨Erase 1 File/Folder Erase / 37- Select ERASE 1 FILE / 37- Folder ERASE / 37󳀨Functions and Using Method of the SD/MMC / 38󳀨Inserting the Battery / 384.Firmware Upgrade 󳀨Firmware Upgrade / 39- Installing the Driver / 39- Firmware data downloding / 405.Self-troubleshooting / 426.Product Specifications / 431.Product Introduction󳀨Accessories Items / 3󳀨Products Safety precautions / 4󳀨Features of NewGen 5 Series products / 6 󳀨Simple Manual / 7󳀨Win 98 Driver Installation / 9󳀨USB Mass Storage / 10󳀨Removable Disk / 11󳀨Name of Each part / 13󳀨LCD display / 142.Functions󳀨Basic Operation Function / 15󳀨Listening to MP3 Files / 16󳀨Listening to the FM Radio / 18󳀨FM Preset Mode / 19󳀨Recording While Listening to FM Radio / 21󳀨Voice Recording / 22󳀨Encoding from External Devices / 24󳀨Navigation Mode / 263.Other Menu functions󳀨Playing Speed / Repetition / 28󳀨Section Repetition / 28󳀨Language Study / 29󳀨voice Recording / 30- VAD / 30- Silence Level / 30
4PPrroodduucctt SSaaffeettyy PPrreeccaauuttiioonnssAAcccceessssoorriieess IItteemmssStereo Earphone (AXE) Necklace Installation CD ※Accessory items may be added or changed according to functional improvement.USB Cable Encoding Cable Battery (1 AAA size)Users Guide11223344557766▶Basic Contents3Do not put magnetic cards such asdebit cards or gift cards near theproduct.Connecting the USB port while theproduct is operating may damagethe product. Before connecting theUSB port, turn off the product.Avoid direct sunrays, rainwater,sand, and other materials that cancause mechanical shock to theproduct.Storing the product in a dusty, hothumid or soot-covered place maycause a product breakdown. Do not repair, dissemble, or remodelthe product at your own choice.Protect the product from severe shockand vibration, and do not drop theproduct.
6FFeeaattuurreess ooff NNeewwGGeenn55 SSeerriieess PPrroodduuccttss󳂟󳂟External Memory SD/MMC Card-It is easy to extend the memory capacity.-Extensible to 1GB / TN-550 (512MB) + 512MB SD/MMC Card.󳂟󳂟Excellent for Language Study-The user can select the playing speed., and useful functions for language study such as automatic repetition, speed control, and repetition count setting are supported.󳂟󳂟Removable Disk -When the product is connected to the PC, the product is automatically recognized as a removable disk.-With the memory card (SD/MMC) extention slot, the user can easily extend, the memory capacity.-This device can be used without any separate management S/W.-By connecting the device to the PC through the USB cable, it can be used as a portable disk without any separate battery.󳂟󳂟Robust Encoding-By connecting the product to an external stereo system or a telephone, the user can record data. -Robust MP3 direct encoding.-Sync Function - Various encoding options are supported for CD - recording.󳂟󳂟Unlimited Folders-The user can unlimitedly create folders and store music files by category - artist, album, genre, etc. 󳂟󳂟Necklace Type-The device adopted a fine design to meet new generation’s taste, and it is super-light.-It is supper-light(46g : including batteries) and easy to carry.󳂟󳂟Firmware Upgrade-By upgrading the firmware, the user can upgrade product functions as well. -Check library in the website of TeraValue to add and upgrade product functions.󳂟󳂟Maximum 7-line LCD-7Line Wide Graphic LCD adopted.-Sharpness and brightneess are controllable.󳂟󳂟Voice function (VAD / Silence / Bit Rate Setting) -Record various sounds including voice.-Maximum recording time : about 72 hours (when extending the Memory to 1GB)󳂟󳂟Macintosh Support-Supporting Over Mac OS Version 8.1 󳂟󳂟Linux Support-Supporting Over Kernel 2.4.185PPrroodduucctt SSaaffeettyy PPrreeccaauuttiioonnss󳀎Do not cut, dissemble, or heat the battery, and do not put the battery in a fire.(An electrolyte from the battery such as alkaline liquid may contact user's eyes or may result in heating and explosion.)󳀎If not using the product for a long time, take out the battery from the body.󳀎When an electrolyte leaked from the battery, clean inside the battery cover.󳀎When smoke is found or heating is generated, resulting in deformation of the product, promptly take out the battery◐Cautions When Using the BatteryDo not insert foreign materialsbesides the SD/MMC card into theSD/MMC card slot. When carrying this device in apocket or wearing it around theneck, be careful not to get bruise orhurt other people. Connecting the USB Port--When downloading the firmware,never disconnect the USB cable.Note
87SSiimmppllee MMaannuuaallSSiimmppllee MMaannuuaall【Menu Modes and Detailed Menu 】【Description 】Detaild Menu ( + / - Button)Brightness is controlledINT FLASH(internal memory) EXT CARD(external memory)MIC(voice recording)/ LINE IN(encording from external devices)32kHz / 44.1kHz / 48kHzMone / Stereo / Joint Stereo32kHz ~ 224kHzLine input is controlledON / OFF / 1 SYNCON / OFFLOW / MIDDLE / HIGH LEVELMONO/ STEREONormal / Slow / FastRepeat All / No Repeat / Repeat 1 son / Repeat RANDO / RANDOCounter = Repetition count settingON / OFFMEMORY - INT REMAIN / TOTAL (internal memory(available capacity) (used capacity)MEMORY - EXT REMAIN / TOTAL (internal memory(available capacity) (used capacity)KOREA / ENGLISH / JAPANESE / CHINESE (Simplified / Traditional)INT FLASH(internal memory) / EXT CARD(external memory)INT FLASH(internal memory) / EXT CARD(external memory)Select a file, then delete itSelect a folder, then delete itFirmware upgradeMenu Mode (<< / >>)LCD ContrastMEMORY SELMusic SourceSAMPLE FREQCHANNEL MODEBIT RATELINE VOLUMESYNCVADSILENCEFM MODESPEED MODEREPEAT MODEAUTO RepeatEXERCISEMEMORY INTLANG SELECTFORMATLOW FORMATERASE 1 FILEFOLDER ERASEF/W Upgrade󲻻Recording / EncordingPower On/Off 󲻸󲻹Volume ControlMenu SelectionFolder/File Search󲻼MENU Mode EQNAVI/A-B Search PhraseRepetitonAuto Repetiton󲻺❼Next TrackUp FM FreqMenu SelectionLower Folder❻Previous DownFM FreqMenu SelectionUpper Folder❽Play / FM Radio
910( Insert the provided installation CD into the CD-ROM)※For Win 98 OS, install Win 98 driver included in the provided CD before using the product.【Installing Window 98 Driver 】TIP - By using the install 98. bat, the user can install Window 98 driver and firmware upgrade driver.- The removable disk is automatically recognized without installation of separate driver.( Window 2000/ME/XP/Mac 8.1 )WWiinn 9988 DDrriivveerr IInnssttaallllaattiioonn▶Step 1: Click the Win 98 Folder.▶Step 3: Connect the USB cable to the product.▶Step 2: Click the install98.bat file.󳃨󳃨( Internal Removable Disk )( External Removable Disk )(After connecting the USB cable, the removable disk is displayed in the PC as shown inthe following figure.)USB Mass StrorageTTIIPP::CCOONNFFIIGG.. SSYYSS ffiillee iiss bbaassiiccaallllyy ccrreeaatteedd󳀎Upon opening an internal memory portable disk, a config.sys file saves a value set by a user in the menu.󳀎Upon deleting a config. sys file, the setting value is intialized.󳀎Upon power off this device, the value saved in the menuautomatically saved.When a user presses NAVI button,config. sys is displayed on the LCD.Note : Do not delete the config. sys file.⊙A user who uses Window 98/SE must have an additional installation program( For the installation program, a user can use a CD contained in the product or download it fromwww.teravalue.com)⊙Windows 2000/ME/XP/Over Mac 8.1(When this device is connected to a PC whose operating system is Windows, no additionalinstallation driver is required)TIP - For a user who uses Mac OS 8.6, download “ USB Mass Storage 1.3.5.smi” from the Apple website before using the product. 1. Installing Driver2. CONFIG. SYS File 󳀌Advantages of Removable Disk󳀌●Suitable to moving mass storage files/folders in a PC and backing up important data.●A users can easily move data between the PC and the Mac, and between a house and office.●A users can easily and safely keep an authorized certificate for internet banking and various musicfigure/presentation data.
12▶Copying and Moving File / Folder-With Window Explorer,the user can select, copy and move files and folders.RReemmoovvaabbllee DDiisskk -- UUssaaggee11▶Automatic Recognition-When the user connects this device with the PC through the USB cable, The device is automaticaiiy recognized and the user can easily use it as a removable disk(Plug&Play)▶NO - Power USB Connection-This device uses USB power, therefore it does not need internal power upon connecting with USB(This device can be connected with the PC without consuming battery, it can safely transmit data)RReemmoovvaabbllee DDiisskk -- BBaassiicc FFeeaattuurreessTIP - 2 removable disk icons are created in the PC(MY Computer)- INT MEMORY and EXT MEMORY are displayed as different removable disks.TIP - This device can use music and other funtions with battery power and does not supportcharge function upon connecting with USB▶Easy - Data Move-No additional control program between the PC and this device is required.- The user can easily read/write/delete/move various data(files and folders) using “Window Explorein the PC such as HDD, FDD.- This device enables users to move data between 2 removable disks.▶Portable Mass Storage SD/MMC Memory Card- This user can easily extend mass capacity and memory by using SD/MMC memory card (EXT MEN)and easily user several SD or MMC memory card such as a CD or a floppy diskette.▶Semi - permanent Storage Media- This device a flash memory as a storage media, so it does not damage data unlikely a CD or a diskette and its lifetime is semi-permanent󳃨󳃨Coping as music file saved in the PC Removable Disk󳃨󳃨Internal Removable Disk External Removable Disk▶Moving data between internal/external disks-The user can easily use data between 2 removable disks created newly▶Creating a folder by music / language / lecture󳃨󳃨󳃨󳃨󳃨󳃨Opening a removable disk Click folder Creation a folder※Note - When the user plays this device after creating only a folder in the removable disk, No Filesdisplayed on the LCD.- The device recognizes and plays only files. TIP - The user can easily use copy, move and delete all data※- EXT MEMORY removable disk is created when inserting an external memory slot in the PC.- When this device is separated from the PC, the corresponding removable disk icon disappears.
1413NNaammee ooff EEaacchh PPaarrttEarphone JackRecord / Encoding / Pause NAVI/A-B(Search / Phrase RepetitionAuto Repetition) Built-in MicLCD Play / FM Radio Stop / Pause Menu Mode and EQ Next Track / Fast RewindMenu Selection Up FM FrequencyMenu SelectionPower On/Off Volume Button Menu Selection NAVI Folder / File SearchFrontSideRearLine In Connection PortUSB Connection PortHold SwitchPreviousTrack / Fast ForwardMenu Selection Down FM FrequencySD/MMC Card SlotNecklace RingLLCCDD DDiissppllaayyLCDLineSyncLCD
1615BBaassiicc OOppeerraattiioonn FFuunnccttiioonn①Power On / Off (Press Power button for 2 seconds or more to turn on/off the power.)②Volume Control, Menu Selection, and NAVI File Search③All NAVI Folder Search, A-B Section Repetition, Automatic Phrase Repetition (Play State)④Recording Start / Stop⑤Return to Menu (Stop State) / Equalizer (Play State)⑥LCD - Indicates the operation status and menu setting status. ⑦Previous / Fast Forward / Down FM Frequency / Menu Selection / Upper Folder⑧Play / Stop / FM Radio / Pause⑨Next Track / Fast Rewind / Up FM Frequency / Menu Selection / Lower Folder②⑤⑦⑨③⑥①④⑧LLiisstteenniinngg ttoo MMPP33 FFiilleess【Thing to Check and Prepare Before Playing MP3 Files】󳂮󳂮Check the remaining battery.(The smaller the remaining battery is, the less the numberof displayed bar is.)󳂮󳂮Put the Hold switch in Off position.【Listening to Music 】【Searching NAVI Folders 】▶To save thefolder file and exit 1. Selecting Memory Sel-The user can optionally listen to the music saved in the internal/external memories.(Go to Memory Sell menu in Stop State, and set internal/external memories with '+/-' buttons.)2 Setting a folder with NAVI/A-B button-By setting files in a folder, the user can optionally listen to music.Step 1 : Go to Folder Search menu with NAVI/A-B button in Stop State, and search the folder with '+/-' buttons.Step 2 : Enter the folder with '>>' button, and search folder files with '+/-' buttons.Step 3 : Set the folder files with NAVI/A-B button and exit. ※Note - If there is no folder or file in the memory, "No Files!!" is displayed.▶Upper Folder▶Lower Folder
1817LLiisstteenniinngg ttoo MMPP33 FFiilleess▶Equalizer ▶Pause▶Volume ControlBy pressing the button for 2 ~ 3 seconds while playing,the user can temporarily stopplaying. Press the button for 2 ~ 3 secondswhile playing the file to enjoyvarious kinds of sound effects. Pressing long~▶POWER ON / OFF▶Previous / Next▶Fast Rewind / Fast Forward▶Play / StopPressing Shortly~Play~Stop~Pressing Shortly~Pressing long~Pressing long~On~ Off~【Basic Instruction】2.LLiisstteenniinngg ttoo tthhee FFMM RRaaddiioo▶Turning off the Radio ▶Turning on the RadioBy pressing the button shortly, theuser can go search Radio channels. By pressing the button for a while,the user can automatically searchradio channels. ▶AUTO Searching Radio Channel ▶Searching the Radio ChannelBy pressing the button for a whilein Stop state, the user can go toFM Radio menu. By shortly pressing the button again,the user can go to previous standbystate.Pressing Shortly~DOWN ~UP ~Pressing Long~Pressing Long~1.3. 4.Pressing for3 secondsor more~Pressing Shortly~DOWN ~UP~Pressing Shortly~TIP : FM Mode- By using ‘NAVI/A-B’ Button, set MONO / STEREO- Stereo setting may be automatically changed according to FM receiving type.Nor →Normal Clac →Classic Live →Live Pop →PopRok →Rock Tec →TechnoJaz →Jazz Pressing long~
2019FFMM PPrreesseett MMooddee※-"Preset No" message on the LCD means that the channel was saved and the user can listen to the channel. -Preset numbers are from 1 ~ 20. In other words, maximum 20 channels can be saved. ▶After searching the FMchannel, press Menu key for a while (around 4 seconds)▶After searching the channelnumber by pressing buttons,choose the channel number.▶Press the Menu key for awhile (around 4 seconds)again to save the channelin the chosen number. 1.▶By shortly pressing the Menu key again,you can check preset Radio channels. 1.▲▲Preset Setting▲▲Checking Preset Radio Channels▶To go to the initial FM state,shortly press the Menu key again. 2.󳃨󳃨Pressing long~FFMM PPrreesseett MMooddee-Without selecting a menu, the user can freely change and set channel presetting.▲▲Changing the Preset 5.Previous ChannelSaved preset #Saving preset #LCD (1 PRESET)3.2.Pressing Long~4. 6.1.7.󳃨󳃨󳃨󳃨󳃨󳃨󳃨󳃨Pressing Shortly~Pressing Long~2. 3.Pressing long~
2221RReeccoorrddiinngg WWhhiillee LLiisstteenniinngg ttoo FFMM RRaaddiioo ▶Before starting recording,control the volume.▶By shortly pressing Recordbutton while listening to FMradio, it can start recording. ▶To stop recording,shortly press Recordbutton. ▶To view information of the recorded file,press Record button, or to play the file,press Record button again.1. 2. 3.■Pause(To temporarily stop recording,press Record button for 2 ~ 3seconds.)Pressing Long~TIP -To View information of the recorded file, press Menu/EQ button.- Recording track name is displayed as ENCO on the LCD4.VVooiiccee RReeccoorrddiinngg【Things to Check Before Starting Recording】▶Select MIC IN Music Source menu.▶For normal recording, select VAD On from Music Source Menu. ▶Before recording, control the volume.※Before recording, thoroughly read lower functions relating to voice recording.VAD-ON: When no sound input is made, The device enters into Pause state and resumesrecording when voice input is made.【Recording Voice in the Folder】1 Selecting Memory SelThe user can optionally listen to the music saved in the internal/external memories.- Go to Memory Sell menu in Stop State, and set internal / external memories with '+/-'buttons. 2 Setting a folder with NAVI/A-B buttonBy setting files in a folder, the user can optionally listen to music.- Step 1 : Go to Folder Search menu with NAVI/A-B button in Stop State, and search the folder with '+/-' buttons.- Step 2 : Enter the folder with '>>' button, and search folder files with '+/-' buttons.- Step 3 : Set the folder files with NAVI/A-B button and exit.【Searching NAVI Folders】▶To save the folderfile and exit※Note - If there is no folder or file in the memory, "No Files!!" is displayed.▶Upper folder▶Lower folder
2423VVooiiccee RReeccoorrddiinngg【Basic Function】-Press the button to start recording in Stop state. - Checking and Listening to Recorded VoiceTo display the file name of recorded voice, press the button. To play the file, press Play button again. ■Pause※Press the button for 2 ~ 3 seconds while playing the file to temporarily stop playing. Pressing Long~PauseRecording󳃨󳃨TIP -To View information of the recorded file, press Menu/ EQ button.- Recording track name is displayed as ENCO on the LCDEEnnccooddiinngg ffrroomm EExxtteerrnnaall DDeevviicceess【Connecting the Product with an External Device】※Before recording, thoroughly read lower functions relating to external device recording.22..55Ø33..55Ø【Things to Check Before Starting Encoding】- Select "Line In" from Music Source Menu.- Select "VAD On / Off" from Music Source Menu.- Select 1 Sync / Sync Off / Sync On in Sync Menu.- Select 32KHz / 44.1KHz / 48KHz in Sample Frequency Menu.- Select Low / Middle / High in Silence Level Menu.- Select MONO / STEREO / JOINT STEREO in Channel Menu- Control the volume in Line in Volume Menu.TIP - LLiinnee IInn VVoolluummee :During encoding, increase the volume of the external device.- JJOOIINNTT SSTTEERREEOO :When the Line in volume is high, encoding is made at a high volume as well.▶1 SYNC -Automatically stops after encoding one track.▶SYNC ON - Encodes all tracks by dividing them into each track and encoding them into each file.▶SYNC OFF -Encodes all tracks as a single file. ▶The higher the frequency is, the higher the recording sound quality.▶The user can select the recording sound quality by bit rate.
25EEnnccooddiinngg ffrroomm EExxtteerrnnaall DDeevviicceess▶After turning on the external device,press the button in Stop state to startrecording. To stop recording, press thebutton again. 【Encoding from External Devices】When encoding,the indicated partblinks on the LCD.StopRecording※Press the button for 2 ~ 3 seconds while playing the file to temporarily stop playing. ■Pause2~3 seconds- Checking and Listening To display the file name of recorded voice, press the button. To play the file, press Play button again. 26NNaavviiggaattiioonn MMooddee 【Searching NAVI Folders】【Setting the Internal / External Memory】▶Folder File search (+/- Button) Continuous Search▶To save the folder file and exit ▶Lower Folder▶Upper FolderIcon(Internal)FolderFile※No file is played in the search funtionIcon(External)File(Go to Memory Sel menu in Stop state, and set the Int Flash (internal memory) or the Ext Card (external memory) by using +/- buttons.)󳃨󳃨󳃨󳃨When inserting external memoryFolderTIP - To View information of the recorded file, press Menu/EQ button.- Recording track name is displayed as ENCO on the LCD.
27 28NNaavviiggaattiioonn MMooddee 󳂮󳂮Language StudyExample) Selective Language Listening※By setting this part, the user can listento only English files.󳃨󳃨󳃨󳃨LanguageStudy FolderABCD(Language Study File)󳂮󳂮Recording LecturesExample) Selective Lecture Listening※By setting this part, the user canlisten to only files in Economicsfolder.󳃨󳃨󳃨󳃨Lecture RecordingFolder Economics FolderPolitics FolderManagement Folder1 2 3 4 (Lecture-recorded File)󳂮󳂮Listening to MusicExample) Selective Music Listening󳃨󳃨󳃨󳃨Music FolderArtist A FolderArtist B FolderArtist C Folder1 2 3 4 (Music File)※By setting this part, the user canrepeatedly listen to only Artist A's songs. 【Folder / File Search】OOtthheerr MMeennuu FFuunnccttiioonnss󳂮󳂮Playing Speed / Repetition (Go to Menu Mode in Stop state, and make a setting by pressing +/- buttons.)󳃨󳃨󳃨󳃨▶Playing Speed▶Repetition Mode▶Playing Speed▶Repetition Mode󳂮󳂮Section RepetitionA.Shortly press the button at the startingpoint of the repetition section during playing. B.Shortly press the point at the ending pointof the repetition section during playing. 󳃨󳃨Start~End~A. B.TIP - Repeat ALL - Play aii tracks in sequence No Repeat - Play only a selected track, then stopRepeat 1 son - Continuously repeat only a selected trackRepeat RANDO - Repeat all tracks randomlyRANDO - Play all tracks randomlyEnglish FolderJapanese Folder
3029OOtthheerr MMeennuu FFuunnccttiioonnss󳂮󳂮Setting the repetition count of the phrase (from 1 to 9)(Go to Auto Repeat Mode in Stop state and make a setting by pressing +/- buttons.)【Language Study】󳃨󳃨󳃨󳃨TIP - By continuously playing/repeating each phrase, the user can easily study a foreign language.- When setting the repetition count to 2 times, the phase is continuously repeated 2time.(When no setting, the phase is repeated one time)TIP - The playtime is given according to the length of phrase. The user can listen and repeat according to the phrase.Pressing Long~Pressing Long~(Press the button for a while at the starting point of the repetition section during playing.)󳂮󳂮Continuous Repetition of the Phrase (Auto)(Set ‘ON’ with ‘+ / - ‘ button in the Exercise menu under the stop status.)󳂮󳂮Language Repetition Study -EXERCISEOOtthheerr MMeennuu FFuunnccttiioonnss󳂮󳂮Setting Silence Level (Adjusting the Sensitivity of the External MusicSource)- In VAD On state, the user can record voice with various musicsource sensitivity settings. (Go to VAD Mode in Stop state, and set VAD On/Off by pressing +/- buttons.)(Go to Silence Level in Stop state, and set Low / Middle/ High by pressing +/- buttons.)【Voice Recording】󳃨󳃨󳃨󳃨󳃨󳃨󳃨󳃨※Select MIC from Music Source menu before recording. 󳂮󳂮VAD (Voice Activity Detection) - When no sound input is made, NewGen5 enters into Pause state and resumes recording when voice input is made.
3231OOtthheerr MMeennuu FFuunnccttiioonnss- The user can select the recording sound quality by bit rate. -The higher the frequency is, the higher the recording sound quality.Normal sound-quality recording Long-time recordingHigh sound-quality recordingShort-time recording 32 / 40 / 48 / 56 / 64 / 80 / 96 / 112 / 128 / 160 / 192 / 224kbps 󳂮󳂮Bit Rate (Selecting the Recording Sound Quality)󳂮󳂮Setting Sample Frequency ※When voice-recording is made, 󳂭symbols blinks on the LCD. 󳃨󳃨󳃨󳃨32KHzLow Frequency 44.1KHzNormal Frequency Setting 48KHzHigh Frequency(Go to Sample Frequency menu in Stop state, and set 32KHz / 44.1KHz / 48KHz bypressing +/- buttons.)TIP - The default bit rate is 128kbps.OOtthheerr MMeennuu FFuunnccttiioonnss32KHzLow Frequency 44.1KHzNormal Frequency Setting 48KHzHigh Frequency(Go to Sample Frequency menu in Stop state, and set 32KHz / 44.1KHz /48KHz bypressing +/- buttons.)- The higher the frequency is, the more similar the MP3 file is to the originalsound in case of encoding from an external device.󳂮󳂮Sample Frequency▶1 SYNC -Automatically stops after encoding one track.▶SYNC ON - Encodes all tracks by dividing them into each track and encoding them into each file.▶SYNC OFF -Encodes all tracks as a single file. (Go to Sync menu in Stop state, and set 1 Sync / Sync On / Sync Off by pressing+/-butten.)󳂮󳂮Sync Function- When encoding from an external CD player, the user can automatically encode each track.【Encoding from an External Device】-Select Line from Music Source menu before encoding from an external device.󳃨󳃨󳃨󳃨
3433OOtthheerr MMeennuu FFuunnccttiioonnss- When encoding from an external device, the user can encode by setting thesilence level of the music source.󳂮󳂮Silence Level※According to the silence level setting, Sync function may have different performance during encoding.(Go to Silence Level menu in Stop state, and set Low / Middle/ High by pressing +/-buttons.)󳃨󳃨󳃨󳃨󳂮󳂮Line In Volume(Go to Line In Volume menu in Stop state, and set the volume by pressing +/- buttons.)󳃨󳃨󳃨󳃨TIP-When the external device or the Line In volume is high, encoding is made at a high volume as well. TIP - In case of normal encoding, set the middle level.OOtthheerr MMeennuu FFuunnccttiioonnss【LCD Contrast Level Control】▶Control the contrast levelby pressing +/- buttons.▶Select LCD Contrastfrom the menu.【MUSIC SOURCE 】-Select the menu before recording/encording.▶Select Line In / MIC bypressing +/- buttons▶Select Music Sourcefrom the menu.󳃨󳃨󳃨󳃨※LINE IN -Encoding MIC-Recording voice󳃨󳃨󳃨󳃨TIP- MIC icon is not displayed on the LCD
3635OOtthheerr MMeennuu FFuunnccttiioonnss※If a wrong language setting was made, broken characters may be displayed on the LCD.【Language Selection】(Korea/English/Japanese/Chinese(Simplified/Traditional)▶Select the languageby pressing +/ buttons.▶Select LANG Selectfrom the menu.󳃨󳃨󳃨󳃨【Internal/External Memory Capacity】Internal Memory CapacityAvailable Memory SpaceExtended Memory CapacityAvailable Memory Space▶Check the currentmemory capacity bypressing +/- buttons.▶Select Memory Int fromthe menu. 󳃨󳃨󳃨󳃨OOtthheerr MMeennuu FFuunnccttiioonnss※-Format the memory only in the device.-Keep in mine that the user cannot recover any file after memory format.【Memory Format】▶Select Format / Low Format from the menu. (The required time depends on the memory capacity.)󳂮󳂮FORMAT / LOW FORMATTIP-Fast initialization format - Delete and format part of the saved content.Slow initialization forma - Erase and format whole of the saved content.󳃨󳃨󳃨󳃨FORMATLOW FORMATFORMATLOW FORMAT▶Play button to (OK?/PLAY)
37OOtthheerr MMeennuu FFuunnccttiioonnssOOtthheerr MMeennuu FFuunnccttiioonnss1. Fully insert the SD/MMC into the slot.2. Remove the SD/MMC into the arrow direction as shown in the figure.1. 2.【Functions and Using Method of the SD/MMC】【Inserting the Battery】1. Open thebattery coveras shown inthe figure. 2. “-” side of thebattery must befaced towardthe necklace. 1. 2.Note: ※Replace it with a new one under the stop staus.※Do not open the battery cover fully to prevent its damage.TIP - To efficiently use the battery and maximize the using time - Take out the battery when is not used for a long time. - Control the LCD brightness level on the menu.++--38【ERASE 1 FILE/ FOLDER ERASE】󳂮󳂮Select ERASE 1 FILE 󳂮󳂮FOLDER ERRAASSEE▶Select ERASE 1 file from the menu▶Play button to (OK?/PLAY) ▶Select ERASE / FOLDER ERASE from the menu▶Play button to (OK?/PLAY) 󳃨󳃨ERASE 1 FILETIP- ERASE 1 FILE’ deletes only a selected file. FOLDER ERASE’ deletes all file in folder except the folderFOLDER ERASEFOLDER ERASEERASE 1 FILE󳃨󳃨󳃨󳃨󳃨󳃨󳃨󳃨󳃨󳃨
4039FFiirrmmwwaarree UUppggrraaddee【F/W Upgrade】Firmware Data Downloading▶Step 1 : First, download the firmware data from Downlaod Library in the website of TeraValue and save it in the PC.▶Step 2 : Press Play button in the F/W Upgrade mode.▶Step 3 : Connect the device with the USB cable.▶Step 4 : Click the Mp3explr.exe file saved in the folder.󳃨󳃨󳃨󳃨󳃨󳃨FFiirrmmwwaarree UUppggrraaddee󳂮󳂮installing the Driver for Firmware UpgradeWin98.Win2000.WinMe/XP in the folder- install 98.bat (Window 98)- install 2000.bat (Window 2000)- install Me/XP.bat (Window Me/XP)▶Step 2 : After connecting the USB cable, the removable disk is displayed in the PC▶Step 1 : Insert installation CD into the CD-ROM of the PC【F/W Upgrade】- Management󳃨󳃨󳃨󳃨TIP - After disconnecting the USB cable of NewGen5 for which firmware upgrading has beenmade,turn off NewGen5 and turn it on again.
4241SSeellff-- ttrroouubblleesshhoooottiinngg【When the device does not function properly, check thefollowing first before requesting repair services.】󳂭Check if the USB port is connected when moving the data.(Check the USB port connection status.)󳂭Check if language setting has been correctly made in Menu ▷Display ▷Language menu 󳂭Check if the play speed in the speed mode is correctBroken characters are displayed on the LCD󳂭Format the memory(Low Format)󳂭Check if the data is not larger than the memory capacityStored data is notexecuted or deletedDownloading from the PC is not madeThe file is not playedRecording is not madeThe LCD does notfunction󳂭Check batteries.(If batteries are done, replace it with a new one.)󳂭Check if LCD Contrast Level is so weak(Increase the LCD Contrast Level.)󳂭Check if the device is not in Hold state.(Release the Hold switch.)󳂭Check if the memory space is in full.(Delete unnecessary files.)󳂭Check if the device is not in Hold state.(Release the Hold switch.)󳂭Check the battery.(If the battery is done, replace it with a new one.)󳂭Check if the volume is not 0.(Increase the volume.)󳂭Check if the file has been made.󳂭Check battery polarities.(insert the battery into the correct direction.)The music is played slowly / fastFFiirrmmwwaarree UUppggrraaddee※NoteDisconnecting the USB cable while downloading is made to upgrade the firmware may cause a critical damage to the product.▶Step 5 : Select Upgrade Application Code in the Tool menu.▶Step 6 : Select the downloaded data file and click open button, and the firmware starts to be downloaded.▶Step 7 : After finishing download, disconnect the USB cable and press record button, and the user can go to initial state▶Step 8 : Using Firmware Upgrade- After disconnecting the USB cable for firmware upgrading has been made,turn off the device and turn it on again.
4443WWaarrrraannttyy1. This product has been manufactured under strict quality control and inspections. 2. For breakdowns occurring within the warranty period (one year) under normal operating conditions, TeraValue provides free repair services. 3. However, if the breakdown is due to reasons mentioned below, TeraValue may charge service fees. 4. Please fill in the Warranty card and keep the warranty card for free repair services. 5. When a problem occurs, contact the sales office or TeraValue at the following address. ※For breakdowns due to the following reasons, service fees will be charged·Breakdowns due to user's mishandling·Breakdowns due to unauthorized remodeling·Breakdowns due to natural disasters - fires, seawater, flood, earthquake, etc.Product NameTeraValue※Please fill in Customer, Sales Office and Purchase fields in this form when you purchase a product. Purchase DataCustomerSalesOfficeSellerAddAddNameAddSerial NumberModel NameTelTelWarranty Period: One YearTel+82-31-788-7375PPrroodduucctt SSppeecciiffiiccaattiioonnss※Since functions share the memory, the memory area used by each function may change.【Model Name: NewGen5 Series】- TN-510 (128MB) / TN-530 (256MB) / TN-550 (512MB)DimensionsWeightMemory Extension SlotBit RateSampling FrequencyFile Transmission RateSupported File TypesFM Noise RatioFM Frequency AreaEarphone OutputVoice RecordingSupported LanguagesMaximum Playing TimeOperating SystemsBattery46.5×77.5×5 (W×H×D)46g (Including the battery)SD / MMC Card32kbps ~224kbps32KHz / 44.1KHz / 48KHzMaximum 5MbpsMP3 File/WMA50dB76MHz ~108MHz20mW(L) + 20mW(R)About 72 hr / 1GBEnglish/ Korea/Japanese/ Chinese (Simplified / Traditional)Approximately 12 hoursWindow98 / ME / NT / 2000 / XP / Mac OS / LinuxOne AAA Alkaline Battery Suite 509 kyounggi Venture Bldg, korea Design Center, #344-1, Yatap-1dong, Bundang-Gu, Sungnam-si, Kyounggi-Do,463-070, Korea

Navigation menu