Tele Radio i Lysekil C0911A Transmitter User Manual Revised

Tele Radio AB Transmitter Users Manual Revised

Users Manual Revised

Tele Radio PantherSAFETY INSTRUCTIONS IM-PN-TX001-A02-ENARTICLE CODE: PN-R8-1, PN-R8-2, PN-R8-6, PN-T7-3, PN-T7-4, PN-T7-5. LANGUAGE: ENGLISH (ORIGINAL)
Thank you for puchasing a Tele Radio product PN-R8-1, PN-R8-2, PN-R8-6, PN-T7-3, PN-T7-4, PN-T7-5INSTRUCTIONS ARE AVAILABLE FOR DOWNLOAD AT: www.tele-radio.comREAD ALL INSTRUCTIONS CAREFULLY BEFORE MOUNTING, INSTALLING AND CONFIGURATING THE PRODUCT. These instructions are published by Tele Radio AB without any guarantee. These instructions are solely directed towards qualied installers. The instructions may be removed or revised by Tele radio AB at any time and without any further notice. Corrections and additions will be added to the updated versions of the instructions. The instructions that contain information on the installation and conguration of the remote radio control unit on the machine are not intended to be passed on to the end user. Only such information may be passed on to the end user, that is needed to operate the machine correctly by radio remote control. Tele Radio AB products are covered by a guarantee against material, construction or manufacturing faults. During the guarantee period, Tele Radio AB may replace the product or faulty parts with new. Work under guarantee must be carried out by Tele Radio AB or by an authorized service centre specied by Tele Radio AB. Make sure that repairs and maintenance are only carried out by qualied personnel. Use only spare parts from Tele Radio AB. Contact your Tele Radio representative if you need service or support. The EC declaration of conformity can be downloaded from our website. ©Tele Radio AB, 2010TELE RADIO ABDatavägen 21, SE-436 32 Askim. Sweden Tel: +46 (0)31-748 54 60 Fax: +46 (0)31-68 54 64 www.tele-radio.com. info@tele-radio.comThe helpdesk group can help you with questions regarding service and technical support. helpdesk@tele-radio.com
6ContentsCONTENTSTECHNICAL DATA RECEIVER Receiver (base board) 7Receiver (base + relay expansion board) 8Receiver (base + high voltage expansion board) 9Current consumption 10Receiver data 11TECHNICAL DATA TRANSMITTER Transmitter 10Batteries 13Change the batteries 13SETTINGS Start the transmitter 14Turn the transmitter off 14Register the transmitter in the receiver 15Erase all transmitters from the receiver 15LED indications 17Placement of labels with IC and FCC information 19FCC statement 21Guarantee, service, repairs and maintenance 21Battery precautions 22Disposal of batteries 23Disposal of electronics 23
6 181920LED7 LED8LED6LED9LED10FSRelay 5 Relay 1 Relay 3Relay 2 Relay 45 1 2 3 4+ -12-24 V DCCO NO NC WR/5 CO NO NC 1 (on/off)CO NO NC 2CO NO NC 3 (kill)CO NO NC 4 (Buzzer)1234567891011121314151617LEDsTECHNICAL DATA RECEIVERR8-1 (BASE BOARD)1. Relay 1- on/off relay2. Relay 5- working relay3. Relay 24. Relay 3- kill relay5. Relay 4- buzzer relay6. Power supply connection 6-30 V DC7. Relay LED 58. Relay LED 19. Relay LED 210. Relay LED 311. Relay LED 412. Power supply LED 613. Trabus programming connector14. Terminal block for RS23215. Function button (Cancel) 16. Select button (OK)17. LED 818. Base board communication LED 919. LED 1020. LED 712345678910 11 131214151617181920
7 R8-6 (BASE + RELAY EXPANSION BOARD)21. Expansion board communication LED 1122. Relay LED 623. Relay LED 724. Relay LED 825. Relay LED 926. Relay LED 1027. Relay LED 1128. Relay 629. Relay 730. Relay 831. Relay 932. Relay 1033. Relay 1134. Trabus programming connector181920LED7 LED8LED6LED9LED10FSRelay 5 Relay 1 Relay 3Relay 2 Relay 45 1 2 3 4+ -12-24 V DCCO NO NC WR/5 CO NO NC 1 (on/off)CO NO NC 2CO NO NC 3 (kill)CO NO NC 4 (Buzzer)1234567891011121314151617LEDsRelay 6 Relay 7 Relay 8 Relay 10Relay 9 Relay 11LEDLED6LED7LED8LED9LED10LED1121222324252627282930313233343536373839CO NO NC CO CO NO NC CO NO NC CO NO NC CO NO NC CO NO NC 678910 112128 29 30 31 32 3334222324252627
8 181920LED7 LED8LED6LED9LED10FSRelay 5 Relay 1 Relay 3Relay 2 Relay 45 1 2 3 4+ -12-24 V DCCO NO NC WR/5 CO NO NC 1 (on/off)CO NO NC 2CO NO NC 3 (kill)CO NO NC 4 (Buzzer)1234567891011121314151617LEDs21222324COMMON24-110 V AC230 V ACLEDR8-2 (BASE + HIGH VOLTAGE EXPANSION BOARD) Recommended cable for RS232 is a twisted or shielded cable. 2221 23 24COMMON 24-110 V AC 230 V AC3535. Power supply LED 12
9 Current consumptionRX MODEL SUPPLY VOLTAGE MAX. CURRENT CONSUMPTIONR8-1 12-24 V DC <200 mA. R8-2 24-230 V AC <200 mA. R8-6 12-24 V DC <300 mA. Technical dataFUNCTIONAL RELAYS: 5/ 11 potential free* functional relays makes/ breaks 8A ACINUMBER OF CHANNELS: 16 SIZE: 120 x 116 x 50 mm./ 4.7” x 4.6” x 2”WEIGHT: 400-500 grams/ 14-18 oz. IP CLASS: IP66
10 Technical data transmitter17 18 193211st step2nd stepTECHNICAL DATA TRANSMITTER3-BUTTONS TRANSMITTER T51. Top LED (red/green)2. LED 2 (red)3. LED 1 (red)4. 2-step buttons 1-3NOTE! The right transmitter shows the button positions for the second step on the 3-button transmitter. 1234Frequency: 2405-2480 MHz.
11Technical data transmitter22212017 18 196543211st step2nd step6-BUTTONS TRANSMITTER T41. Top LED (red/green)2. LED 2 (red)3. LED 1 (red)4. LED 4 (red)5. LED 3 (red)6. 2-step buttons 1-6NOTE! The right transmitter shows the button positions for the second step on the 6-button transmitter. 123456Frequency: 2405-2480 MHz.
12 Technical data transmitter8-BUTTONS TRANSMITTER T31. Top LED (red/green)2. LED 2 (red)3. LED 1 (red)4. LED 4 (red)5. LED 3 (red)6. 2-step buttons 1-8NOTE! The right transmitter shows the button positions for the second step on the 8-button transmitter. 242322212017 18 19786543211st step2nd step123456Frequency: 2405-2480 MHz.
13Technical data transmitterBATTERIESBATTERY TYPE: 3 x 1.5 V AAA alkalineOPERATING TIME: Approx. 15 h. with continuous usageWARNING! Do not recharge! Attempts to recharge may cause rupture, or the leaking of hazardous liquids which will corrode the equipment.CHANGE THE BATTERIES1. Remove the clip (2 screws).2. Remove the battery cover (2 screws).3. Remove the batteries, starting with the one in the middle. 4. Put the new batteries (3 x 1.5V AAA batteries) in, start-ing with the battery to the left or to the right. 5. Put back the battery cover (2 screws).PROGRAM THE TRANSMITTER1. Remove the clip (2 screws).2. Remove the battery cover (2 screws).3. Remove the right battery. The program-ming connector is placed behind the battery.
14 SettingsSETTINGS• discontinuous radiotransmission• no on/off functionThe system will start transmitting as soon as the batteries are inserted and a transmitter button is pressed. Radio transmission will end as soon as no transmitter button is being pressed. DEFAULT STATESTART THE TRANSMITTERTURN THE TRANSMITTER OFF1. Start the transmitter by pressing any transmitter button. 1. The transmitter turns off when no transmitter button is pressed.
15Settings1. Press the receiver Function button and the Select button at the same time until red LED 1-5 go out. NOTE! If red LED 7 ashes slowly, one or several transmitters are still registered in the receiver. REGISTER THE TRANSMITTER IN THE RECEIVERERASE ALL TRANSMITTERS FROM THE RECEIVER1. Press the receiver Function button until red LED 7 lights up.2. Press the receiver Select button until LEDs 1-5 light. 3. Press any transmitter button, e.g. button 1 until LEDs 1-10 ash 3 times before going out.
16 SettingsAll buttons (step 1 and/ or 2) as well as all relays can be re-mapped using the PC program Settings manager. At delivery, the default relay setting is:R8-1:Transmitter button 1 (1st + 2nd step) activates relay 1Transmitter button 2 (1st + 2nd step) activates relay 2Transmitter button 3 (1st + 2nd step) activates relay 3Transmitter button 4 (1st + 2nd step) activates relay 4Transmitter button 5 (1st + 2nd step) activates relay 5R8-6 with a 6 relay expansion board connected:Transmitter button 6 (1st + 2nd step) activates relay 6Transmitter button 7 (1st + 2nd step) activates relay 7Transmitter button 8 (1st + 2nd step) activates relay 8RELAY SETTINGS
17 LED INDICATIONSLED INDICATIONS DURING START UP1. All receiver relay-LEDs lit up for 0.5 sec. 2. Indications for settings are shown for 2 sec. Contact your representative if you have problems starting the system. LED INDICATIONS IN PROGRAMMING MODELED 7 red ONLED 8 yellow ONLED 9 green ONLED 10 orange ONLED INDICATIONS DURING OPERATIONLED 7 red OFF No transmitter registeredashes (on 500 ms./ off 1.5 s.)Transmitter logged in.ashes (on 1 s./ off 1 s.)At least one transmitter registered. No radio transmission. ON Valid radio packages from transmitter received.
18 ERROR LED INDICATIONSLED 7 (red)+ LED 8(yellow)ON The receiver can not read the start-up information. Contact your representative. LED 7 (red)ON Radio module setup failed. Contact your representative. LED 8 ON A radio package not coming from a Panther transmitter is received. LED 8 + LED 9 ON A radio package is received, but is not accepted. Contact your representative. LED 8 + LED 10 ON A radio package is received from a transmitter that is not registered. Register the transmitter, or switch to another frequency. LED 9 ON A radio package is received, but the radio signal strength is too weak. Contact your representative for more information. LED 10 ON A radio package is received, but is not accepted. Contact your representative.
19 PLACEMENT OF LABELS WITH IC AND FCC INFORMATION1. Product labelThe product label is placed under the clip on the battery lid. Remove the clip (2 screws). 1.PbModel: T00007-03Freq.: 2405-2480MHz Sn.:XXXXXXwww.tele-radio.com2150PbModel: T00007-04Freq.: 2405-2480MHz Sn.:XXXXXXwww.tele-radio.com2150PbModel: T00007-05Freq.: 2405-2480MHz Sn.:XXXXXXwww.tele-radio.com2150PbModel: T00007-05Freq.: 2405-2480MHz Sn.:XXXXXXwww.tele-radio.com2150
20 The IC label is placed on the left side of the battery clip. The FCC ID label is placed on the right side of the battery clip (see picture). The mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certication for use when properly worn on the body is 0.087 W/kg.2.2. IC and FCC ID labelFCC ID: ONFC0911AIC: 4807A-C0911A
21 FCC STATEMENTSTHIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIP-MENT. SUCH MODIFICATIONS COULD VOID THE USER´S AUTHOR-ITY TO OPERATE THE EQUIPMENT.THIS EQUIPMENT COMPLIES WITH FCC RADIATION EXPOSURE LIMITS SET FORTH FOR AN UNCONTROLLED ENVIRONMENT. END USER MUST FOLLOW THE SPECIFIC OPERATINGINSTRUCTIONS FOR SATISFYING RF EXPOSURE COMPLIANCE. THIS TRANSMITTER MUST NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER.GUARANTEE, SERVICE, REPAIRS AND MAINTENANCEThe Tele Radio products are covered by a guarantee against material, construction and manufacturing faults. During the guarantee period, Tele Radio may replace the product or faulty parts. Work under guarantee must be carried out by Tele Radio or by an authorized service centre specied by Tele Radio. This is not covered by the guarantee: Faults resulting from normal wear and tear. Parts of a consumable nature. Products that have been subject to unauthorized modications. Faults resulting from incorrect installation and use. Damp and water damage. Repairs and maintenance must be carried out by qualied personnel. Use spare parts from Tele Radio only. Contact your representant or HelpDesk if you require service or other assistance. Keep the product in a dry, clean place. Keep contacts and antennas clean. Wipe off dust using a slightly damp, clean cloth. Never use cleaning solutions or high-pressure water.
20 Battery Precautions BATTERY PRECAUTIONS Observe the following warnings. As batteries contains ammable substances such as lithium or other organic solvents, they may cause heating, rupture or ignition.• Risk of explosion if battery is replaced with a battery of an incorrect type. • Do not short circuit, disassemble, deform or heat batteries. • Never try to charge a visibly damaged or frozen battery.• Do not charge rechargeable batteries with a higher voltage than specied.• Keep batteries out of reach of small children. Should a child swallow a battery, consult a physician immediately.• Avoid direct soldering to batteries.• When discarding batteries, insulate the + and - terminals of batteries with insulating/ masking tape. Do not put multiple batteries in the same plastic bag.• When improperly disposed, lithium batteries may short circuit, causing them to become hot, burst or ignite.• Store in a cool location. Keep batteries away from direct sunlight, high temperature, and high humidity. • Do not throw batteries into re.
21Disposal Of ElectronicsDISPOSAL OF BATTERIESAn alkaline battery does not contain mercury, cadmium or lead, and is better for the environment than older types of batteries. Alkaline batteries should be disposed through local recycling stations/waste dumps. Contact your local government’s recycling or solid waste department for more information on proper recycling of alkaline batteries in your region.DISPOSAL OF ELECTRONICSImproperly disposed electronics may harm public health and the environment. Batteries and electronic waste may contain toxic heavy metals. If thrown away in the trash, the toxic compounds can leach into soil and water, pollute lakes and streams, making them unt for drinking, swimming, shing, and wildlife. Contact your local government’s recycling or solid waste department for more information on proper disposal of electronics in your region.
TELE RADIO SVERIGESwedenTel. +46 (0)31-724 98 00e-mail: sverige@tele-radio.com TELE RADIO GmbHGermanyTel. +49 (0)94 51-944 8 550e-mail: deutschland@tele-radio.com TELE RADIO ASIAChinaTel. +86-(0)592-3111168e-mail: china@tele-radio.com TELE RADIO TURKEYTurkeyTel. +90 216 574 22 94e-mail: turkiye@tele-radio.com TELE RADIO LTDEnglandTel. +44 (0) 1625 509125e-mail: england@tele-radio.com TELE RADIO LLCNorth America & Latin AmericaTel. +1 (305) 459 0763e-mail: america@tele-radio.com TELE RADIO BVBeneluxTel. +31-(0)70-419 41 20e-mail: benelux@tele-radio.com TELE RADIO ASNorwayTel. +47-6933 4900e-mail: norge@tele-radio.comTELE RADIO ABSweden, Main officeTel. +46 (0)31-748 54 60e-mail: info@tele-radio.com www.tele-radio.com

Navigation menu