Techsan I and C LM17 LCD Monitor User Manual 1

Techsan I & C Co., Ltd. LCD Monitor 1

User Manual

FCC ID : RJ5LM17 REPORT NO. : HCT-F04-0503 HYUNDAI C–TECH ATTACHMENT E. - USER’S MANUAL
CAUTION : TO REDUCE THE RISK OFELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTSINSIDE. REFER SERVICING TOQUALIFIED SERVICE PERSONNEL.This symbol is intended to alert the user to thepresence of uninsulated “dangerous voltage”withinthe product’s enclosure that may be of sufficientmagnitude to constitute a risk of electric shock topersons.This symbol is intended to alert the user to thepresence of important operating and maintenance(servicing) instructions in the literatureaccompanying the appliance.“W A R N I N G - To Reduce The Risk Of Fire Or Electric Shock, Do NotExpose This Apparatus To Rain Or Moisture.”“Apparatus shall not be exposed to dripping or splashing and no objects filledwith liquids, such as vases, shall be placed on the apparatus.”“C A U T I O N - These servicing instructions are for use by qualified servicepersonnel only. To reduce the risk of electric shock, do not perform anyservicing other than that contained in the operating instructions unless you arequalified to do so.”RISK OF ELECTRIC SHOCKDO NOT OPENCAUTION WARNING & CAUTION
Important Safety Instructions1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with a dry cloth.7) Do not block any of the ventilation openings. Install in accordance with themanufacturer's instructions.8) Do not install near any heat sources such as radiators, heat registers, stoves, orother apparatus (including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding type plug. Apolarized plug has two blades with one wider than the other. A grounding typeplug has two blades and a third grounding prong. The wide blade or the thirdprong is provided for your safety. When the provided plug does not fit intoyour outlet, consult an electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularly at plugs,convenience receptacles, and the point where they exit from the apparatus.11) Only use the attachments/accessories specified by the manufacturer.12) Use only with a cart, stand, tripod, bracket, or table specified by themanufacturer, or sold with the apparatus. When a cart is used, use cautionwhen moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periodsof time.14) Refer all servicing to qualified service personnel. Servicing is required whenthe apparatus has been damaged in any way, such as power supply cord or plugis damaged, liquid has been spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does not operate normally, orhas been dropped.
FCC (Federal communication commission) InformationThis product has been tested and found to comply with the limits for a TVBroadcast Receiver, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This product generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. If this product doescause or receive interference, which can be determined by turning product off andon, the user is encouraged to try to correct the interference by one of the followingmeasures:Reorient or relocate the TV antenna.Increase the separation between TV and other product.Connect TV into separate outlet from other product.Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate this product.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if Not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, Which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet of a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for assistance. Changes or modification not expressly approved by the party responsible for Compliance could void the user’s authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables.
1. Packing List2. Safety Instructions3. Features4. Installation4-1 Monitor Description4-2 Connecting To The Computer5. Monitor Adjustment5-1 OSD Menu Description5-2 Accessing the OSD Menu5-3 OSD Menu Descripyion6. Specifications6-1 Monitor Specification6-2 Video Input Connector6-3 Resolutions Supported 7. Troubleshooting8. Descriptions of Technical Terms1
2Your new ‘LM1730A’should contain the following items:- LM1730A Monitor- AUDIO CABLE- 15pin D-SUB Signal Cable- User’s Guide- Power Cord※The power cord may be changed to accommodate electrical outlets worldwide.1Packing ListLM1730A15pin D-SUB Signal CableAUDIO CABLEPower CordUser’s Guide
3󰥒Do not place heavy objects on the power cord.󰥒Do not use your monitor near water. 󰥒Turn off the monitor if there is thundering and lightening.󰥒Do not open your monitor. There are no user serviceable parts inside.Opening the case might expose you a hazardous shock.󰥒Do not place the monitor on an unstable table or stand.󰥒Do not insert small conductive objects into the monitor. They might causea short or a hazardous shock.󰥒Adjust the height of monitor so that the top of the screen is belowapproximately 10 degrees.󰥒If reflected light makes it hard to see the screen, use a glare filter.󰥒Clean the LCD screen of the monitor surface with a lint-free, non-abrasivecloth. Avoid using any cleaner or solvent, such as benzene.󰥒Do not operate the monitor in a place that is extremly hot, humid or dusty.- Proper temperature: 5 ~ 35 ℃- Humidity: 20 ~ 80 RHSafety Instructions2
4Screen: 17.0”viewable XGA (1280*1024) resolution LCD module andspace-saving slim design.Plug and Play Function: Implementation of DDC 1/2B(Display DataChannel 1/2B). Connected to the computer, the monitor automaticallyinforms the host of its compatibility over DDC communication channel.VESA Wall Mount: This allows for the monitor to be mounted on the wallor an arm using any third party compliant device.OSD (On Screen Display) Menu Controls: This allows users to adjust thescreen simply by selecting menu items and ranges on the monitor’sscreen.Auto-Adjustment Controls: Automatically can adjust screen size, clockand clock phase, etc.VESA DPMS (Display Power Management Signaling): This providesinnovative power-saving methods that allow the monitor to shiftautomatically to a lower power consumption mode while it has power butnot in use. Features3
54-1. Monitor Description.Installation4POWER BUTTONMENUSelect◀▶A U T O15-pin D-Sub Signal ConnectorDC Input ConnectorAudio Input
61. Be sure to turn your monitor, computer and all peripheral devices offbefore connection.2. Connect 15-pin D-Sub connectors to both the computer and monitor.3. Connect the DC-input terminal to the monitor and power cord to anapproved AC outlet.4. Turn on your computer and monitor.5. Turn off your computer and monitor after use.4-2. Connecting To The Computer<Note>Self-Diagnostic ScreenNot connecting the monitor with the computer will result in a “No Input Signal,Check Connection”message on screen. Please insure the monitor is properlyconnected if you see this message before calling service. Note15pin D-SUB signal cableDC 12V (output)15pin D-SUB
75-1. OSD Menu Description.Opens the OSD.Monitor Adjustment5OSD MenuM e n uSELECT A FUNCTION FROM THE OSD.S E L E C TMoves the selector left or right on the OSDDecreases or increases values if the selected function.Directly adjust the brightness level if pressed while the OSD is off.◀/ ▶Activates the Auto Adjustment function.A u t oIndicates the status of the monitorGREEN : Normal OperationAMBER Blink : Power Saving Mode or Disconnected Signal Cable.Power LedTurns the monitor on and offPower ButtonYour TFT-LCD allows you to easily adjust the characteristics of the imagebeing displayed.All of these adjustments are made using the control buttons on the frontof the monitor While you use these buttons to adjust the controls, an on-screen menushows you their numeric values as they change.POWER BUTTONMENU ◀ ▶SELECTAUTO
85-2. Accessing the OSD Menu1) With the OSD off, push the MENU button to display the main OSD menu.2) Use the “◀”and “▶”buttons to move between the function icons.As you move from one icon to another, the function name changes to reflect the function or group of functions represented by that i con.3) Press the Select button once to activate the highlighted function then follow the Tool Tips to select the function and adjust the value4) After selecting a function, use the “◀”and “▶”buttons to make the adjustments.The setting sliderbar moves and the numeric value indicator change to reflect your adjustments.5) Push the Menu a couple of times to return to the main menu to select another function or exit from OSDOptimize the display settings for use with computer.Adjust the brightness of the screen.Adjust the display to the contrast desired.Auto AdjustB r i g h t n e s sC o n t r a s tTo minimize any vertical bars or stripes visible onscreen background.The horizontal screen size will also change.F r e q u e n c yAdjust the focus of the screen.P h a s e5-3. OSD Menu Description
95-3. OSD Menu DescriptionAdjust the picture image on left and right.Set the screen on Dos Mode.Horizontal PositionDos ModeAdjust the picture image on up and down.Vertical PositionChange the transparency of OSD.OSD TransparenceMove the OSD window to the horizontal direction.OSD H-PositionMove the OSD window to the vertical direction.OSD V-PositionAdjust the display color with different set of colorsettings.Color AdjustAdjust the display color as user's desire.USER Color To choose the language in which the control names aredisplayed.OSD LanguageTo exit from the menu.E x i tDiscard current settings and replace correspondingparameters with the factory default values.Factory ResetAdjust the built-in speaker volume.V o l u m eThe following describes in sequence the options in the main menu.
105.4 Adjust the screen imageIf the “Auto Adjust”does not display proper image, display can be set by manualadjustment.1) Type any character on the screen by using notepad or any other word program.2) Adjust the H/V position for proper display.3) Use the Frequency option to adjust the image focus.4) Setup the color, brightness and contrast as you wish to see.5) Return to normal condition by exit the OSD menu.
11Specifications6LCD Module●Diagonal : 17.0”inch●Viewing Image Size : 17.0”inch ●Native Resolution (Pixel Count) : 1280X1024Pixel Pitch: 0.264 mmView Angle:Typ:65/65 degree (left/right), 50/60 (up/down) (at CR>10)Display Color: 16.2M colors (true)Resolution Supported: 1280X1024 @60Hz-75Hz(Down Scaling Mode)1024X768 @60Hz-75Hz800X600 @56Hz-75Hz640X480 @60Hz-75Hz720X400 VGA TextRecommended Resolution: 1080X1024 @60HzHorizontal Frequency : 30 - 80 KHz Vertical Frequency : 55 - 75 HzInput Termina: 15-pin D-Sub Connector.Voltage Rating: 12V 3.33APower Dissipated: 40WSafe Mode Dissipated Power Rating: Below 5WMonitor Size: 410 X 403 X 200 mm (W X H X D)Weight : 5.9 Kg (Unpacked), 7.1 Kg (Packed)Environmental Considerations:●Operating Temperature : 0 degree C ~ 35 degree C●Humidity : 30% ~ 80%Storage Temperature :●Operating Temperature :-5 degree C - 45 degree C●Humidity: 5% ~ 90%6-1. Monitor Specification
126-2. Video Input ConnectorPin Number123456789101112131415Signal NameREDGREENBLUEN.CGROUNDRED-GROUNDGREEN-GROUNDBLUE-GROUNDN.CGROUNDGROUNDDDC DataH-SyncV-SyncDDC Clock15-pin D-Sub connector is used as the input signal connector.Pin and input signals are shown in the table below.
136-3. Resolutions SupportedHorizentalFrequency PolarityResolutionModeNoVertical Frequency PolarityPixelClock(MHz)2 8 . 3 2 22 5 . 1 7 53 0 . 2 4 03 1 . 5 0 03 6 . 0 0 04 0 . 0 0 05 0 . 0 0 04 9 . 5 0 06 5 . 0 0 07 5 . 0 0 07 8 . 7 5 01 0 8 . 0 0 01 3 5 . 0 0 0PNNNN / PPPPNNPPPNNNNN / PPPPNNPPP3 1 . 4 7 K H z3 1 . 4 7 K H z3 5 . 0 0 K H z3 7 . 8 6 K H z3 5 . 1 6 K H z3 7 . 8 8 K H z4 8 . 0 8 K H z4 6 . 8 7 K H z4 8 . 3 6 K H z5 6 . 4 8 K H z6 0 . 0 2 K H z6 4 . 0 0 K H z8 0 . 0 0 K H z7 2 0×4 0 06 4 0×4 8 06 4 0×4 8 06 4 0×4 8 08 0 0×6 0 08 0 0×6 0 08 0 0×6 0 08 0 0×6 0 01 0 2 4×7 6 81 0 2 4×7 6 81 0 2 4×7 6 81 2 8 0×1 0 2 41 2 8 0×1 0 2 41234567891 01 11 21 3V G AS V G AX G AS X G A70.0 Hz60.0 Hz66.7 Hz72.8 Hz56.3 Hz60.3 Hz72.2 Hz75.0 Hz60.0 Hz70.1 Hz75.0 Hz60.0 Hz75.0 Hz
14If you have difficulty with the LCD monitor, check the following symptomsand recommended courses of action.Troubleshooting7Screen Symptom Check point ActionPower LED is “off”,and no picture?Power LED is “on”,but no picture? ▶Brightness or contrastis adjusted right? Please adjustbrightness andcontrast correctly.▶Is power cordconnected correctly?▶Is “No Input SignalGoing to Sleep”shown on the screen?▶Please connectpower cord correctly.▶Please check thevideo input terminal.Screen’s position orsize is not proper? ▶Screen’s position andsize is adjustedcorrectly?Please adjust positionand size correctly.Screen color isstrange? ▶Your graphic card isset correctly?▶Changed resolution isset correctly?▶Please check if graphiccard is set correctly.▶Please check ifchanged resolution is setcorrectly.Please reset yournew graphic cardsetting.Please adjust“Phase”on the OSDMenu.Re-configure thedisplay timeing ofyour system.After changing videocard,color is fixed on16 color?Characters on screenare not focused? Orhorizontal noiseoccurred?Picture at theCRTmonitor but nopicture at theLCDmonitor?▶Windows color settingis correct?▶Is “Phase”adjustedcorrectly?▶Is “Out of Range”shown on the screen?
15ResolutionScreen resolution is measured in pixels, or picture elements. One pixelis the smallest area that can be manipulated by the computer.Resolution is always stated as the horizontal number of pixels by thevertical number of pixels. A screen displaying 1280 x 1024 pixels has1024 rows, each 1280 pixels wide.Descriptions of Technical Te rm s8Plug and Play.Microsoft’s strategy is to be able to install new hardware devices andconfigure peripherals easier.When connecting with computer, the monitor will initially adjust itselfto the best screen settings automatically through its communicationchannel, DDC (Display Data Channel)DDC 1/2B(Display Data Channel 1/2B)The International Standard VESA DDC method, through which Plug &Play supported devices can be recognized and connected with thecomputer easier. When you turn on the computer’s power, productinformation, such as manufacturer, screen size, resolution, timing table,which is included in monitor circuit board, is transferred to the VGACard. (DDC 1/2B) compatibility offers significant performanceadvantages by enabling monitor capabilities, including scanningfrequencies and image sizing, to be communicated automatically to theoperating system without the use of drivers or diskettes for installation.
16Vertical Scan Rate Or Refresh RateNumber of complete screens displayed per second by the monitor. A 70Hz refresh rate will provide a flicker-free image. The higher the refresh,the better the imageHorizontal Scan RateFrequency that roughly corresponds to the number of horizontal lines amonitor can display per second. For 1280 x 1024 pixels with a verticalrefresh rate of 75 Hz, the horizontal scan rate is 80.0 KHz.On-Screen Display (OSD)Newer, more advanced monitors come equipped with an On-ScreenDisplay (OSD) that adjusts all display parameters via an on-screencontrol panel. OSD allows you to adjust all display set-up parametersand color temperature settings through icon-based, on-screen controlpanels.

Navigation menu