Technicolor Delivery Technologies Belgium TC8706T Cable Modem User Manual 37124070 TISsafety P1

Technicolor Delivery Technologies Belgium Cable Modem 37124070 TISsafety P1

Contents

User Manual (Safety Instructions)

ImpRead these instructions. ortant Safety Instructions Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Warning: Use only the power supply that came with your unit. If the power supply needs to be replaced, contact your service operator or dealer to obtain an authorized
Do not insert anything into any opening of the case. Leave the power socket accessible so that you can unplug the set quickly. Leave 2 to 3 inches around the product to ensure proper ventilation to it. To clean the product, use a dry clean soft cloth with no cleaning solvent or abrasive products. Clean the ventilation openings regularly. Environmental information The batteries use some hazardous substances which pollute the environment. Do not dispose of them with other articles. Take care to dispose them at special collecting points. Technical specifications Model type DCI401COM3 Operating voltage 120V AC / 60 Hz / 0.2ATypical Power consumption 5.0W (typical)max 6.0W (max) Weight 0.42 Lb Dimensions (W x H x D) 4.33 x 0.96 x 3.19 Inches Operating temperature range 59 to 104° F / 15 to 40°C Storage temperature range -4 to 158°F / -20 to 70°C Manufactured under license from Dolby Laboratories. Copyright ©1998-2005 The OpenSSL Project. All Rights ReservedThis product includes software developed by the OpenSSL Project for use in the OpenSSL toolkit (http://www.openssl.org/) This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)This product includes software written by Tim Hudson (tjh@cryptsoft.com) Copyright © 1995-1998, Eric Young All rights reserved This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com) 37124070 FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authorityto operate the equipment.Normal use of this product should be at distances of 20cm (8 inches) or more from your body. ! Meaning of symbols This symbol is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product housing that may be of sufficient magnitude to constitute a risk of shock. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions accompanying the product. Ens Disconnect the product from the power before you connect the product to (or disconnect it from) any other equipment. Avoid any contact with the power, which can be lethal or cause severe electric shock. uring optimum performance

Navigation menu