Tatung KEN4-R STEREO DIGITAL WIRELESS AUDIO DONGLES (RECEIVER) User Manual 1

Tatung Company STEREO DIGITAL WIRELESS AUDIO DONGLES (RECEIVER) Users Manual 1

Contents

Users Manual 1

Wi AudioLinkUSER GUIDEJM-WAL35Professional Stereo Digital Wireless Audio DonglesSTEREO DIGITAL WIRELES
CONGRATULATIONS! Thank You For Choosing Jangus Music!Congratulations on your purchase of the Wi-AudioLink Professional Stereo Digital Wireless Audio Dongles.In this manual, you’ll nd information designed to help you understand the capability of your Wi-AudioLink as well as step-by-step explanation on how to install and operate your Wi-AudioLink professional stereo digital wireless audio dongles.Wi-AudioLinkCONGRATULATIONS
Getting Answers! We want you to get the most from your new Wi-AudioLink professional stereo digital wireless audio dongles! Simply logon to www.jangusmusic.com and access the powerful resources available online including instructional manuals and frequently asked questions.Our customer service support staff are ready to assist you with any question you may have. Your Wi-AudioLink comes with 90 days of telephone support and one year of service coverage. There are may ways to contact Jangus Music customer service support. E-Mail: support@jangusmusic.com Website: https://www.jangusmusic.com/support Technical support: (949) 526-4877 [949-JANGUS7] Wi-AudioLink3TECHNICAL SUPPORT
Making Grate Instruments Better!Jangus Music’s Wi-AudioLink JM-WAL35 professional stereo digital wireless audio dongles solution is the smallest, most advanced cable replacement technology available today that ts on the palm of your hand! This full function 2.4GHz point-to-point digital wireless audio solution provides up to 300 feet of secure, simultaneous un-compressed stereo 48KHz/16bit CD quality wireless audio connectivity without radio frequency (RF) interference with other wireless devices ,signal loss, crackle or AC hum making it the best wireless solution for live performances and studio recording environments. This Patents-Pending, plug-and-play digital wireless audio solution replaces the traditional audio wire cable and provide easy and user friendly way to connect any professional musical instrument such as Digital Pianos, Keyboards, Guitars, Effects Pedals, Electronic Drums and other analog audio devices to remote and hard to reach equipment such as Mixers, Ampliers, Speakers, Samplers, Hard Disk Recorders, Computers and more. Simply connect the dongle size transmitter to the audio output jacks on the musical instrument then connect the dongle size receiver to the mixer, amplier, speaker, surround sound or computer audio input jacks and you are done!...INTRODUCTIONWi-AudioLink4
Meeting The Specs!The Wi-AudioLink transmitter small and rugged design, boasts three (3) different power up modes to support the following instruments connections: • Line-in (Stereo) • Active Guitars/Mono Line-in • Passive Guitars /Electric Acoustic Each of the power up modes are congured to apply the appropriate input impedance and input voltage levels to best match the electrical characteristics of the instrument connected to the transmitter dongle. INTRODUCTIONWi-AudioLink5Transmitter (Tx)Receiver (Rx)Stereo SystemMP3 MixersDJ GearDigital RecordersComputersAmpliersMixersStereo SystemDigital RecordersIn-ear Headphone MonitorsPianos & KeyboardsElectric AcousticsElectronic DrumsElectronic Wind instrumentsEffects PedalsEffects PedalsFlat Screen TVElectric GuitarsComputersProfessional GearConsumerSmart Phone
Extreme Flexibility!The Wi-AudioLink boasts an interchangeable 1/4” (6.35mm) TRS stereo connector jack, 1/8” (3.5mm) stereo miniature jack, 2.5mm subminiature jack and XLR connectors for maximum connectivity with audio devices.The Wi-AudioLink power source exible design boasts an internal rechargeable battery for 6.5 hours of battery operations, powerful USB bus power connectivity to any USB equipped devices and optional ON-THE-GO AA battery power booster adapter for 19 hours of extended battery operations.INTRODUCTIONWi-AudioLink6XLR Unbalanced6.3mm TSR Stereo6.3mm TSR Mono3.5mm Stereo3.5mm Mono2.5mm Stereo2.5mm MonoRCAChargerUSB Bus Power3.5mm StereoAA Battery Power Booster
Creating Your Audio Matrix! Jangus Music’s built-in digital wireless audio signal patch routing feature allows users to re-rout the audio output signal from their instruments to up to eight (8) different digital wireless receivers including Jangus Music’s JM-WHM01 digital wireless headphone audio monitoring system for private listening and performance monitoring with a simple press of the Link button located on the transmitter dongle. No more removing the patch-bay devices, disconnecting cables, and ipping I/O circuit boards!INTRODUCTIONWi-AudioLink7Tx 1Effects Pedals Rx 1Headphone Rx 2Mixer Rx 4Computer Rx 5Rx 7Foot Pedals Rx 8Rx 3Digital Recorder Rx 6
What is included in the package?Verify that you have received all of the items listed below. Please visit our web site at www.jangusmsuic.com for additional accessories.PACKING LISTWi-AudioLink8Wi-Transmitter Wi-Receiver Universal AC Charger(QTY 2) 1/4” Mono Male to 1/8” Stereo Male Cable(QTY 2) 1/4” Stereo Male to 1/8” Stereo Male Y-split Cable Carrying BagUSB Y-Split Power CableUser Manualwww.jangusmusic.com
1. Audio OUT Jack2. Power ON/OFF3. Link / Paring 4. Power/Status LED5. Volume UP6. Volume Down7. Mute/ Play/Pause8. Previous Track9. Next Track10. USB Charging Port11. Belt Clip11~ sABOUT YOUR JM-WAL35Wi-AudioLink91. Audio IN Jack2. Power ON/OFF3. Link / Paring4. Power/Status LED5. Volume UP6. Volume Down7. Mute8. Sleep9. Mic Power Mode10. USB Charging Port11. Belt Clip11jro nq p lm ku|}y {z wx v Wi Transmitter Wi Receiver
Transmitter Dongle Controls and Connectionsj Audio IN Jack: Provide a stereo connection for professional musical instruments, mixers samplers and any analog devices such as MP3 players, cell phones, stereo systems, computers, home entertainment systems and more... k Power ON/OFF: Press and hold the Power button for 2 seconds to turn ON or OFF the transmitterl Power/Status LED: The Power/Status LED display the status of six functions, ON/OFF, Battery Charging, Paring, Microphone Power, Mute and Sleeping mode statuses FPlease refer to the “Tx Button Function Matrix” section of this manual for more detailsm Volume UP: Press and hold the Volume UP for auto increments of the volume level Press the Volume UP once for step increments of the volume level n Volume DOWN: Press and hold the Volume DOWN for auto increments of the volume level Press the Volume DOWN button once for step increments of the volume level TRANSMITTER CONTROLSWi-AudioLink10
o Mute: Press and hold the Mute button for 3 seconds stop the audio transmission FPlease refer to the “Tx Button Function Matrix” section of this manual for more detailsp Link/Pair: The Link button performs two functions Paring and Linking. The Paring function allows the transmitter dongle to connect to up to 8 eight different receivers to create you own wireless audio matrix. Press and hold the Link button for 6 seconds until LED ash F Please refer to the “Paring Procedures” section of this manual for detailed instructions F Please refer to the “Audio Matrix Accessories” section of this manual for options listing The Link function allows the transmitter dongle to reroute the audio signal connect from the instrument to up to 8 eight different receivers previously paired with the transmitter. Press the Link button once and the transmitter will reroute the wireless connection to the next receiver. F Please refer to the “ “Function Matrix Table” section of this manual for additional information F Please refer to the “Audio Matrix Accessories” section of this manual for options listingTRANSMITTER CONTROLSWi-AudioLink11
Transmitter Dongle Controls and Connectionsq Sleep: The Sleep function button on the transmitter dongle is designed to prolong the battery life operations of the transmitter dongle by 50% as well as the receiver dongle battery life 35% when not in use. When the Sleep function on the transmitter is activated, the transmitter dongles sends a signal to the linked receiver dongle to go into a standby mode while switching to full sleep mode. The Sleep mode preserves the audio levels settings on both dongles as well as on the communications link between the transmit and the linked dongle. Press and hold the Sleep button for 3 seconds to switch the transmitter and the receiver dongles onto standby power save mode Press and hold the Sleep button for 3 seconds to wake-up the transmitter and the receiver dongles. F Please refer to the “Tx Button Function Matrix” section of this manual for more details TRANSMITTER CONTROLSWi-AudioLink12
r Mode: The Mode multifunction button allows the user to choose between three different power up modes to support Passive Guitars, Active Guitars or Stereo Line in connection to the transmitter dongle. To select the desired operations mode, press the Mode button for 2 seconds and until the blue LED change its ashing sequence then release, To cycle between the three modes, simply press and hold the Mode button and the transmitter will cycle between the three modes along with the Blue LED ashing sequence to each of the modes. Release the mode button once the desired mode setting is reached F Please refer to the “Tx Button Function Matrix” section of this manual for detailed instructions . s Charging Port: The transmitter dongle utilizes mini USB connection to power up and charge the internal batteries. The transmitter dongle can be charged using the supplied universal AC charger, via the instrument built-in USB port or the optional AA battery power booster USB adapter. Belt Clip: The transmitter dongle can be attached to guitar strap, belt, shirts and pants pockets. The rigid small size light wight design is easy to ware without impeding your movement.TRANSMITTER CONTROLSWi-AudioLink1311
Receiver Dongle Controls and Connectionsu Audio OUT Jack: Provide a stereo connection for professional Sound Systems, Monitors, Mixers, Samplers, Computers Home Digital Theaters, Headphones and more...v Power ON/OFF: Press and hold the Power button for 2 seconds to turn ON or OFF the transmitterw Power/Status LED: The Power/Status LED display the status of ve functions, ON/OFF, Battery, Charging, Paring, Mute and Sleeping mode statuses FPlease refer to the “Rx LED” Indicator Chart” section of this manual for more detailsx Volume UP: Press and hold the Volume UP for auto increments of the volume level Press the Volume UP once for step increments of the volume level y Volume DOWN: Press and hold the Volume DOWN for auto increments of the volume level Press the Volume DOWN button once for step increments of the volume level RECEIVER CONTROLSWi-AudioLink14
z Link/VoIP: The Link multifunction button performs three functions, Paring, Linking and VoIP Mic activation. The VoIP function is covered in the VoIP Microphone on page 15. The Paring function allows the Receiver dongle to discovered by the Transmitter Dongle. Press and hold the Link button for 6 seconds until LED ash FPlease refer to the “Rx Button Function Matrix” section of this manual for detailed instructions The Link function allows the transmitter dongle to reroute the audio signal connect from the instrument to up to 8 eight different receivers previously paired with the transmitter. Press the Link button once and the transmitter will reroute the wireless connection to the next receiver. FPlease refer to the “Rx Button Function Matrix” section of this manual for additional information{ Next Track: The Next Track function button is used with optional PC/MAC USB Transmitter dongle to remotely control the media player and sequencing software to jump to the next audio track on the play list. Press the Next Track button once to jump to the next audio track FPlease refer to the “Audio Matrix” section of this manual for more detailsRECEIVER CONTROLSWi-AudioLink15
Receiver Dongle Controls and Connections| Previous Track: The Previous Track function button is used with optional PC/MAC USB Transmitter dongle to remotely control the media player and sequencing software to jump to the next audio track on the play list Press the Previous Track button once to jump to the previous audio track. FPlease refer to the “Rx Button Function Matrix” section of this manual for more details} Mute/Pause/Play: Press and hold this function button for 3 seconds stop the audio transmission FPlease refer to the “Rx Button Function Matrix” section of this manual for more details When the Receiver dongle is used with optional PC/MAC USB Transmitter dongle, the Mute/Pause/Play function will remotely control the media player and sequencing software to mute, pause or play to the audio track Press the Mute/Pause/Play button once to pause or play audio track. Press and hold the Mute/Pause/Play button for 3 seconds to mute/un-mute audio FPlease refer to the “Rx Button Function Matrix” section of this manual for more detailsRECEIVER CONTROLSWi-AudioLink16
~ Charging Port: The receiver dongle utilizes mini USB connection to power up and charge the internal batteries. The transmitter dongle can be charged using the supplied universal AC charger, via the instrument built-in USB port or the optional AA battery power booster USB adapter. Belt Clip: The receiver dongle can be attached to, belts, shirts and pants pockets when used with in-ear professional personal monitors. The rigid small size light wight design is easy to ware without impeding your movement.RECEIVER CONTROLSWi-AudioLink1711
Ready, Charge, Go!Before using your new Wi-AudioLink professional digital wireless dongles, you need to fully charge the batteries on the dongles for approximately 2 hours.Charging 1. Plug the AC Charger into a power socket 2. Connect the USB Y-Split power cable into the USB port on the AC charger 3. Connect one of the two mini USB connectors into the Transmitter USB port 4. Connect the second mini USB connector into the Receiver USB port 5. The Power/Status LED will turn to solid Red ON 6. When charging is complete the Red LED will turn OFF 7. Remove the charging cable and adapter and store into the carrying casePOWERLINKAC ChargerUSB PortMini USB ConnectorUSB PortUSB ConnectorGETTING STARTEDWi-AudioLink18
Paring the Wi-AudioLinkBefore using the Wi-AudioLink dongles with your instruments, you need to pair the transmitter dongle with the receiver dongle. Pairing will create connection between the transmitter dongle and receiver dongle. 1. First turn ON the transmitter (Tx) and the receiver (Rx) dongles by pressing and holding the POWER button , on each of the dongles for 2 seconds. 2. Press and hold the LINK button on the transmitter (Tx) dongle for 6 seconds. The Power/Status LED on the Transmitter will start ashing. The transmitter dongle is now in a Pairing mode and ready to search for receivers. 3. Press and hold the LINK button on the receiver (Rx) dongle for 6 seconds. The Power/Status LED on the receiver will start ashing. The receiver dongle is now in a Pairing mode and ready to be found by the transmitter dongle 4. Once the transmitter dongle pair with receiver dingle, the Power/Status LED on both devices will turn to solid Green 5. The Wi-AudioLink transmitter and receiver dongles are now ready for use.PARINGWi-AudioLink19pk(Tx)pkzvzv(Rx)
Connecting Electric Guitars & Electric Acoustics Instruments!The Wi-AudioLink transmitter support passive and active guitars including Lead, Bass and Acoustic electric guitars. 1. First Locate the 1/4” mono male to 1/8” stereo male cable supplied with kit. 2. Connect the 1/8” stereo male end of the cable into the “Audio Input” jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable. 4. Connect the 1/4” mono male end of the cable to the electric guitar input located towards the right end of the electric guitar if you’re a right handed player and the left end if you’re left handed. TRANSMITTER CONNECTIONWi-AudioLink20Belt ClipAudio CableAudio Input Jack1/4” Mono to 1/8’ Stereo Cable1/4” mono male connectorElectric Guitar input
5. Verify if you are connecting a passive or active electric guitar to the transmitter. If the electric guitar use a battery to operate, then the guitar is an active type. If not then the guitar is a passive type. 5.1 For Passive Guitars Connection a. Power up the transmitter by pressing and holing the POWER button for 2 seconds. F The Power Status LED will show Slow Flashing Blue and Solid Green LEDs F The standard factory power up setting is set for Passive Guitars . The transmitter can remember and power up in the last power up mode selected .To change the startup mode to the desired mode please refer to the “Tx Function Matrix” of this manual for detailed instructions, 5.1 For Active Guitar & Electric Acoustic Instruments Connection a. Power up the transmitter by pressing and holing the POWER button for 2 seconds. b. Press and hold the Mode button for 2 seconds. The Blue LED will display fast ashes F The Power Status LED will show Slow Flashing Blue and Solid Green LEDs 6. Attache the Wi-AudioLink to the optional Wi-Guitar Strap or to your belt. F Please proceed to page 28 for the receiver connectionTRANSMITTER CONNECTIONWi-AudioLink21rk(Tx)krk
Connecting Professional Musical Instruments & Gear!The Wi-AudioLink transmitter support professional digital instruments connection such as Digital Pianos, Keyboards, Electronic Drums, Electronic Wind Instruments, Hard Disk Recorders, Samplers, Effects Pedals, Mixers, JD gear, and more... 1. For (Mono) connection locate the 1/4” mono to 1/8” stereo cable For (Stereo) connection locate the 1/4” stereo Y-split to 1/8” stereo cable 2. Connect the 1/8” stereo end of the cable into the “Audio Input” jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable. TRANSMITTER CONNECTIONWi-AudioLink22Belt ClipAudio CableAudio Input Jack1/4” Mono to 1/8’ Stereo Cable
4. For (Mono) connection, connect the 1/4” mono male end of the cable to the left mono output (L/MONO) located on the back panel of the digital instrument. For (Stereo) connection, connect the two 1/4” male ends of the cable to the left (L/MONO) and right (R) outputs located on the back panel of the digital instrument. 6. Power up the transmitter by pressing and holing the POWER button for 2 seconds. 7. Press and hold the Mode button until the Blue LED display two fast ashes for stereo Line-in mode operations. F Please refer to the “Tx Button Function Matrix” section of this manual for detailed instructions 6. Place the transmitter (Tx) dongle on top of your musical instrument. Alternatively the receiver can be placed on the next to the musical instrument. F Please proceed to page 28 for the receiver connectionTRANSMITTER CONNECTION Wi-AudioLink23(L/MONO)Digital Instrumentk(R)(Tx)1/4” Stereo Y-Split to 1/8’ Stereo Cablerkr
Connecting Two Keyboards/Digital Pianos!The Wi-AudioLink transmitter can support up to two (2) keyboards / digital pianos in mono mode or stereo mode connection. Please visit our web site at www.jangusmusic.com for the optional two keyboards stereo cable connection accessories 1. First Locate the 1/4” stereo Y-split to 1/8” stereo cable supplied with kit. 2. Connect the 1/8” stereo end of the cable into the “Audio Input” jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable.TRANSMITTER CONNECTIONWi-AudioLink24Belt ClipAudio CableAudio Input Jack1/4” Stereo Y-Split to 1/8’ Stereo Cable
4. Connect the red 1/4” end of the cable to the left mono input located on the back panel of the rst keyboard/digital piano. 5. Connect the black 1/4” end of the cable to the left mono input located on the back panel of the second keyboard/digital piano. 6. Power up the transmitter by pressing and holing the POWER button for 2 seconds. 7. Press and hold the Mode button until the Blue LED display two fast ashes for stereo Line-in mode operations. F Please refer to the “Tx Button Function Matrix” section of this manual for detailed instructions . 8. Place the transmitter (Tx) dongle on top of your musical instrument. Alternatively the receiver can be placed on the next to the musical instrument. F Please proceed to page 28 for the receiver connectionTRANSMITTER CONNECTION Wi-AudioLink25k(L/MONO)(L/MONO)Keyboard #1Keyboard #2(Tx)1/4” Stereo Y-Split to 1/8’ Stereo Cablerkr
Connecting Computers, Stereo Systems, Flat Screens, Smart Phones, iPods & MP3 Players!The Wi-AudioLink transmitter support consumer digital devices connection such as Computers, iPods, MP3 Players, Media players, Smart Phones, Stereo Systems, Flat Screen Displays and any device with headphone jack. Please visit our web site at www.jangusmusic.com for the consumer devices optional cable connection accessories 1. For MP3, Smart Phones and Computer connections, locate the optional 1/8” stereo to 1/8” stereo cable. (Optional cables are not supplied with the kit) For Flat screen TVs and Stereo Systems connection, locate the optional 1/8” stereo male to Y-split RCA cable. (Optional cables are not supplied with the kit) 2. Connect the 1/8” stereo end of the cable into the “Audio Input” jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cableTRANSMITTER CONNECTIONWi-AudioLink26Belt ClipAudio Cable
4. For MP3, Smart Phones and Computer connections, connect the 1/8” stereo male end of the cable to the headphone jack located on your electronic device. For Flat screen TVs and Stereo Systems connection, connect the two RCA male ends of the cable to the left and right audio outputs located on the back panel of the electronic device. 5. Power up the transmitter by pressing and holing the POWER button for 2 seconds. 6. Press and hold the Mode button until the Blue LED display two fast ashes for stereo Line-in mode operations. F Please refer to the “Tx Button Function Matrix” section of this manual for detailed instructions . 7. Place the transmitter (Tx) dongle next to the electronic device. F Please proceed to page 28 for the receiver connectionTRANSMITTER CONNECTIONWi-AudioLink27rk(Tx)rk
Connecting Analog and Digital Devices to Receiver!The Wi-AudioLink receiver support professional digital instruments connection such as Mixers, Ampliers, Sound Systems, Speaker, Hard Disk Recorders, Samplers, Effects Pedals, Mixers, JD gear, and more.. Please note connections must be made with the power turned off. Please be aware that careless operation may damage your speaker system or cause malfunctions. If you’ve connected a stereo audio amp, be aware that playing at high volume may damage your speaker system. Be careful not to raise the volume excessively. 1. For (Mono) connection locate the 1/4” mono to 1/8” stereo cable For (Stereo) connection locate the 1/4” stereo Y-split to 1/8” stereo cable 2. Connect the 1/8” stereo end of the cable into the “Audio Input” jack on the transmitter dongle. RECEIVER CONNECTIONWi-AudioLink28Audio Output Jack1/4” Stereo Y-Split to 1/8’ Stereo Cable
3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable 4. Connect the 1/4” male end of the cable to the inputs of your amplier, powered monitor, sound system, mixer or foot pedal. If you’re using the Wi-Audiolink receiver in stereo, use both the L/ MONO and R jacks on your foot pedal, sampler or use two channels on your sound system, mixer or hard disk recorder.RECEIVER CONNECTIONWi-AudioLink29POWERLINKAudio InputBelt ClipAudio Cable
4. Turn ON the receiver (Rx) dongles by pressing and holding the POWER button on the receiver dongle for 2 seconds. F The Power Status LED on the receiver (Rx) will show Solid Green LEDs F The ashing Green LED on the transmitter (Tx) will turn to Solid Green indicating communications between (Tx) and (Rx) is established. 5. Place the receiver dongle on the amp as shown. Alternatively the receiver can be placed on the oor next to the foot pedal or stomp box. 6. Power up your Amp, Mixer, Digital Recorder or Foot pedal are you are ready to go! RECEIVER CONNECTIONWi-AudioLink30zv(Rx)vPOWERLINK
Connecting Headphones and In-Ear Professional Personal Monitors! PLEASE PROTECT YOUR EARS! Prolonged use of headphones or In-Ear personal monitors at high volumes may affect your hearing capacity or may result in noise induced hearing loss (NHL). 1. Connect the 1/8” stereo connector end of your headphone or In-Ear personal monitor into the “Audio Output” jack on the receiver dongle. 2. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable 3. First turn ON the receiver dongle by pressing and holding the POWER button on the receiver dongle for 2 seconds. F The Power Status LED on the receiver (Rx) will show Solid Green LEDs F The ashing Green LED on the transmitter (Tx) will turn to Solid Green indicating communications between (Tx) and (Rx) is established. RECEIVER CONNECTIONWi-AudioLink31vBelt ClipAudio CableAudio Output JackIn-ear Personal Monitorsv(Rx)
Connecting Computers and Stereo Systems!The Wi-AudioLink receiver support consumer digital devices connection such as Computers, iPods, MP3 Stereo Systems, Notebook and Desktop Computers. Please visit our web site at www.jangusmusic.com for the consumer devices optional cable connection accessories 1. For notebook and desktop Computer connections, locate the optional 1/8” stereo to 1/8” stereo cable. (Optional cables are not supplied with the kit) For stereo systems connection, locate the optional 1/8” stereo male to Y-split RCA cable. (Optional cables are not supplied with the kit) 2. Connect the 1/8” stereo end of the cable into the “Audio Input” jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cableRECEIVER CONNECTIONWi-AudioLink32Audio Output Jack1/4” Stereo Y-Split to 1/8’ Stereo Cable
RECEIVER CONNECTION 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable 4. For notebook and desktop computer connections, connect the 1/8” stereo male end of the cable to the headphone jack located on your electronic device. For stereo systems connection, connect the two RCA male ends of the cable to the left and right outputs located on the back panel of the electronic device. 5. First turn ON the receiver dongle by pressing and holding the POWER button on the receiver dongle for 2 seconds. F The Power Status LED on the receiver (Rx) will show Solid Green LEDs F The ashing Green LED on the transmitter (Tx) will turn to Solid Green indicating communications between (Tx) and (Rx) is established. 6. Place the receiver dongle on top of the stereo system or next to your computer. 7. Power up your stereo system or computer and are you are ready to go! Wi-AudioLink33vBelt ClipAudio Cablev(Rx)
Transmitter (Tx) Button Function Matrix!Function Button Activation Hold Time LED Status Power ON/OFF POWER Press and Hold 3 sec Solid GreenPairing Mode LINK Press and Hold 2 sec Fast Green FlashesSignal Re-routing LINK Click Click Volume UP/Down Click for Step, Press and hold for Auto Click Mute ON/OFF Press and Hold 2 sec Solid Green Blue FlashSleep / Wake up Press and Hold to Sleep / Click to Wake 3 sec 2 Green Flashes Passive Guitar Mode MODE Press and Hold 2 sec Solid Green LED and(Factory setting) Slow Blue LED Flashes Active Guitar Mode MODE Press and Hold 2 sec Solid Green LED and(Mono Line-in) Fast Blue LED Flashes Line in Mode MODE Press and Hold 2 sec Solid Green LED and (Stereo Line-in) Two Blue LED Flashes Tx FUNCTION MATRIX Wi-AudioLink34kp p mn o q r r r
Transmitter (Tx) LED Indicator Chart!Function LED Status Searching For Receiver Flashing GreenLinked to Receiver Solid GreenLow Battery Solid Green & Flashing Red Charging With Power OFF Solid Red Charging With Power ON Solid Red & Green Charging Complete Red OFF Tx LED INDICATOR CHARTWi-AudioLink35ro nq p lm kl l l l l l
Receiver (Rx) Button Function Matrix!Function Button Activation Hold Time LED Status Power ON/OFF POWER Press and Hold 3 sec Solid GreenPairing Mode LINK Press and Hold 3 sec Fast Green FlashesVolume UP/Down Click for Step, Press and Hold for Auto Click Mute ON/OFF Press and Hold 3 sec Solid Green & Blue Play/Pause Click (With Optional USB Tx Dongle) Click Next Track Click (With Optional USB Tx Dongle) Click Prev Track Click (With Optional USB Tx Dongle) Click Rx FUNCTION MATRIX Wi-AudioLink36v z xy}}{|
Receiver (Rx) LED Indicator Chart!Function LED Status Searching For Receiver Flashing GreenLinked to Receiver Solid GreenSleep 2 Green Flashes (Activated By Tx)Low Battery Solid Green & Flashing Red Charging With Power OFF Solid Red Charging With Power ON Solid Red & Green Charging Complete Red OFF Rx LED INDICATOR CHARTWi-AudioLink37|}y {z wx vw w w w w w w
Product Technical Specications!Specications Frequency: 2.4 GHz, 16bit, 48KHz Digital Wireless Communications Frequency Response: 10Hz to 20KhzCommunications Frequency Selection: Auto SelectS/N Ratio: More than 90 dB (A-weighted) for stereo line-in mode More than 87 dB (A-weighted) for passive and active guitar modes Audio Input / Output: 3.5mm Stereo Jack Max Input Level: 3Vrms Max Output Level: 700mVrms Input Impedance: 1M ohm Output Impedance: < 10 ohm Battery Life: 6.5 hoursBattery Type: Internal Rechargeable Batteries PRODUCT SPECIFICATIONS Wi-AudioLink38
Specications Battery Power Boost: 19.5 hours (With optional AA battery power booster adapter)USB Bus Power Yes Low Battery Alert: 15 Minutes of Life LeftPower-up Modes Three (3) Power-up Modes (Line-in/Active Guitars, Passive Guitars, Electric Acoustic) Antenna: Internal AntennasRange: 150 to 300 Feet (May not be dependent on line of sight)Units operating at the same time: 12 Signal Patch Audio Matrix: One (1) transmitter can re-rout audio signal to eight (8) different receivers MAC/PC Compatible: Yes (With Optional USB Transmitter Dongle) VoIP Capable: No 802.11g/n Network Safe: YesTransmitter Weight 0.068 lbsReceiver Weight 0.056 lbsDimensions 1.2” W x 0.6” D x 3.34” HPRODUCT SPECIFICATIONSWi-AudioLink39
Audio Matrix Accessories for Extreme Flexibility!Accessory Specications Wi-StudioM: Digital wireless studio monitors headphonesWi-USB Tx: Digital wireless USB transmitter for MAC/PC audio and VoIP applicationsWi-iPod Tx: Digital wireless transmitter for Apple iPodWi-AudioLink Tx: Digital wireless transmitter for Digital Pianos, Keyboards, Electric Guitars, Electric Acoustic Instruments, Digital Wind Instruments, Effects Pedals, Electronic Drums, Mixers, Ampliers, Speakers, Sound Systems, Samplers, Hard Disk Recorders, DJ Gear, Computers, Consumer Electronics products and more. Wi-AudioStream Tx: Digital wireless transmitter for Mono and Stereo microphones and personal monitoring systems including Ear-Worn Microphones, Clip-on Microphones, Acoustic, Brass and Woodwind Instruments Microphones, MP3 players and more.Wi-AudioLink Rx: Digital wireless transmitter for In-ear Personal Monitors, Studio Headphone Monitors, Effects Pedals, Mixers, Ampliers, Speakers, Sound Systems, Samplers, Hard Disk Recorders, DJ Gear, Computers, Consumer Electronics products and more. PRODUCT ACCESSORIESWi-AudioLink40
ACEESSORIESCable & Power Accessories for Extreme Flexibility!Accessory Specications Wi-BodyFree Guitar Strap: Guitar strap with built-in “Wi-PowerBooster” AA battery power booster adapter, “Wi-AudioLink” Rx receiver socket and cable routing management system for the ultimate in BodyFree wireless performance experience.Wi-PowerBooster: AA battery power booster USB adapter with white LED light for charging and extending the internal rechargeable batteries life on the Wi-Audiolink and Wi-AudioStream transmitters and receivers up to 19 hours.Wi-PowerAdapter: Universal USB power adapter for charging the Wi-Audiolink and Wi-AudioStream transmitters.Please visit our web site at www.jangusmusic.com for the optional cable connection accessoriesWi-AudioLink41
Disposal and Recycling Information!Correct Disposal This symbol indicates that your product must be disposed of properly according to the local laws and regulations.When your product reaches its end of life, contact the retailer where the product was purchased or your local authorities to learn about recycling options. This product should not be mixed with other commercial wastes for disposal.GREEN ENVIRONMENTWi-AudioLink42
Regulatory Compliance InformationCompliance Statement This device complies with part 15 of the FCC rules. Operations is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operations. Disclaimers This manual is published by Jangus Music, Inc. The information contained in this document is subject to change without notice. © 2009 Jangus Music, Inc. All rights reserved. Wi, Wi-AudioLink, Digital Wireless Stereo logo and Jangus Music logos are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other countries. All other trademarks included herein are the property of their perspective owners.FCC NOTICESWi-AudioLink43
www.jangusmusic.com© 2009 Jangus Music, Inc. All rights reserved. Wi, Wi-AudioLink, Digital Wireless Stereo logo and Jangus Music logo are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other countries. All other trademarks included herein are the property of their perspective owners.(Design and specications subject to change without notice).

Navigation menu