TMI 070035F-070043 HEADREST 7.0" 16:9 LCD MONITOR User Manual AS700 user s manual0522

TMI Products, Inc. HEADREST 7.0" 16:9 LCD MONITOR AS700 user s manual0522

User manual

Headrest7.0" 16:9 ColorDisplay MonitorOPERATINGINSTRUCTIONSImportant NoticeIt is unlawful in most jurisdictions for a person to drive a motor vehicle which isequipped with a television or screen that is located in the motor vehicle atany point forward of the back of the driver's seat, or that is visible directlyor indirectly to the driver while operating the vehicle.CAUTION1.Do not operate the monitor at temperatures below -22°F (-30°C) or above 185°F (85°C).2.Keep the monitor clean and dry.3.4.Do not drop the monitor or expose to strong impacts.Do not expose to direct sunlight for extended periods of time.9100768TMI PRODUCTS, INC.Model No.AS700
Installation Guide:The kit includes a protective trim ring and an optional spacer ring for use when the mountingsurface is uneven.1. Select appropriate locations in your vehicle for the monitor .2. Be sure there is sufficient depth for the trim ring. Add the spacer ring for shallow locationswith uneven curved surfaces such as upholstery. Be sure there is enough space for boththe trim ring and for any excess interconnect cable.3. Ensure that the interconnect cable will reach from the monitor location .4. Create the required opening for the monitor and trim ring. Be sure it is not too large, andthat there is enough space behind the trim ring to store any excess interconnect cable.Excess cable does not fit within the trim ring.5. Route the cable through the opening in the trim ring6. Connect the cable to the monitor.7. Securely snap the monitor into place.If you need to remove the monitor from the trim ring, insert a credit card between the monitor andthe trim ring to release the monitor from the flexible locking retainer tabs. Gently pull the monitorfrom the trim ring. Very gentle pressure can be applied using the credit card.01Cable
02Electrical Connections:Note:Pleasemakesureallcablesareconnectedcorrectly, wrong connections will damagethe monitor.POWER CORDYellow ---PowerRed --- ACCBlack --- GNDGreen --- ParkPassage sideDrive sideAV IN 3A(L) A(R)VAV IN 1A(L) A(R)VBLACK-GNDRED-ACCYELLOW-BATTERYGreen-ParkADAPTORSINPUT DC-13.2VFUSE 2ASERIAL NO.AD-7071IR OUTMS44
03Basic Operation:Front Control Panel:10. Earphone9.A/VAUX5/!MENU : Activation of Menu Indicator6/!UP : Positive and Negative Adjustment3. POWER : ON / OFF / AUX Selection button(press and hold the button will power off)4. SOURCE : Select the internal AV1 / AV2 / AV3player7/!DOWN : Positive and Negative Adjustment2. LCD Panel1. IR Receive8. IR Transmitter(2 Input)2 (POWER)Pressing this POWER ( ) button will turn the unit on. If unit off, a singlepress should turn the unit on.SOURCESOURCE3 SourceThis button lets you select the internal AV1 / AV2 / AV3 player.
04Basic Operation:5, 6 Up / DownPress to move up or down in a menu or to change channel whenwatching TV.MENUMENU4 MenuIf the source unit selected has a Setup Menu, you can access it bypressing Source Menu. With the AV1 / AV2 / AV3, this button activatesthe screen Constrast / Brightness / Color / Tint / Shapness / Dimmer /Screen / Reset default feature.On-Screen-Display Settings:When monitor is power on, press mode button on remote or power button control panel to selectvideo inputs AV1/AV2/AV3 NTSC/PAL. (Press and hold power button on control panelwill power off the monitor.)MODE:VOLUME:Press up/down button on remote or on control panel to select "VOLUME" setting, "VOLUME"setting will show as below (right chart).VOLUME
05On-Screen-Display Settings:CONSTRAST:Press Menu button on remote or on control panel, OSD menu will show on LCD screen as below(left chart), press up/down button on remote or press and hold up/down button on control panel toselect "CONSTRAST" setting, "CONSTRAST" setting will show as below (right chart).COLOR:Press Menu button on remote or on control panel, OSD menu will show on LCD screen as below(left chart), press up/down button on remote or press and hold up/down button on control panel toselect "COLOR" setting, "COLOR" setting will show as below (right chart).BRIGHTNESS:Press Menu button on remote or on control panel, OSD menu will show on LCD screen as below(left chart) , press enter button on remote or power button on control panel to select "BRIGHTNESS"setting, "BRIGHTNESS" setting will show as below (right chart).BRIGHTNESSCONSTRAST
06On-Screen-Display Settings:TINTTINT:Press Menu button on remote or on control panel, OSD menu will show on LCDscreen as below (left chart), press up/down button on remote or pressand hold up/down button on control panel to select "TINT" setting. "TINT" settingwill show as below (right chart).SHAPNESSDIMMER LOWSHAPNESS:Press Menu button on remote or on control panel, OSD menu will show on LCDscreen as below (left chart), press up/down button on remote or pressand hold up/down button on control panel to select "SHAPNESS" setting."SHAPNESS" setting will show as below (right chart).DIMMER:Press Menu button on remote or on control panel, OSD menu will show on LCDscreen as below (left chart), press up/down button on remote or pressand hold up/down button on control panel to select "DIMMER" setting. "DIMMER"setting will show as below (right chart).DIMMER HIGH DIMMER MEDIUM
07On-Screen-Display Settings:FM CHANNEL:FM CHANNELSCREEN:Press Menu button on remote or on control panel, OSD menu will show on LCDscreen as below (left chart), press up/down button on remote or pressand hold up/down button on control panel to select "SCREEN" setting. "SCREEN"setting will show as below (right chart).Press Menu button on remote or on control panel, OSD menu will show on LCDscreen as below (left chart), press up/down button on remote or pressand hold up/down button on control panel to select "FM CHANNEL" setting."SCREEN"setting will show as below (right chart).FM MODULE:Press Menu button on remote or on control panel, OSD menu will show on LCDscreen as below (left chart), press up/down button on remote or pressand holdup/down button on control panel to select "FM MODULE" setting."FM MODULE"setting will show as below (right chart).SCREEN NORMALCH1 88.5MHZCH2 88.7MHZCH3 88.9MHZCH4 89.1MHZCH5 89.3MHZCH6 89.5MHZCH7 89.7MHZCH8 89.9MHZSCREEN ZOOM SCREEN WIDEFM MODULEFM MODULEFM MODULEONOFF
08On-Screen-Display Settings:BASIC FUNCTIONS :Pressand holdMenu buttonabout 5 secondson control panel to select from theChannelA/B/OFFvarious mode settings, OSD menu will show on LCD screen asbelow(down chart), press up/down button on remote or pressand hold up/downbutton on control panel to select "BASIC FUNCTIONS" setting. The mode settingstatus will change each time when MENU button is pressed. "MENU"setting willshow as below (down chart).IR CHANNEL CH AAV SYSTEM AV1 / 2 / 3MIRROR OFFSCREEN OFFDIMMER MANUALFM-FUNC ONEXITMENUIR CHANNEL CH BAV SYSTEM AV1 / 2MIRROR OFFSCREEN OFFDIMMER MANUALFM-FUNC ONEXITMENUSOFTWARE VERSION 7071 V1.0 SOFTWARE VERSION 7071 V1.0IR CHANNEL CH AAV SYSTEM AV1 / 2 / 3MIRROR OFFSCREEN OFFDIMMER MANUALFM-FUNC ONEXITMENUIR CHANNEL CH BAV SYSTEM AV1 / 2 / 3MIRROR ONSCREEN OFFDIMMER MANUALFM-FUNC ONEXITMENUSOFTWARE VERSION 7071 V1.0 SOFTWARE VERSION 7071 V1.0IR CHANNEL CH AAV SYSTEM AV1 / 2 / 3MIRROR OFFSCREEN OFFDIMMER MANUALFM-FUNC ONEXITMENUIR CHANNEL CH BAV SYSTEM AV1 / 2 / 3MIRROR OFFSCREEN OFFDIMMER MANUALFM-FUNC ONEXITMENUIR CHANNEL CH OFFAV SYSTEM AV1 / 2 / 3MIRROR OFFSCREEN OFFDIMMER MANUALFM-FUNC ONEXITMENUSOFTWARE VERSION 7071 V1.0 SOFTWARE VERSION 7071 V1.0 SOFTWARE VERSION 7071 V1.0RESET DEFAULTRESET DEFAULTPress Menu button on control panel, OSD menu will show on LCD screen as below (left chart),Press up/down button on control panel to select "RESET DEFAULT" setting. "RESET" setting willshow as below (right chart).
09The Wide Screen Universal Monitor includes mounting options described in thefollowing sections. Before you install the monitor, consider the followingimportant notices:NEVER install this monitor where it can be viewed from the driving position;1.2.3.this is a violation of many state and local vehicle codes.Avoid mounting locations where there is a risk of impact with a passenger inthe event of an accident.Always mount the monitor securely using the mounting hardware that isprovided. Do not use the monitor unless it is properly secured to the vehicle.Installation Notes:IR CHANNEL CH AAV SYSTEM AV1/2/3MIRROR OFFSCREEN OFFDIMMER MANUALFM-FUNC ONEXITMENUIR CHANNEL CH BAV SYSTEM AV1 / 2 / 3MIRROR OFFSCREEN OFFDIMMER MANUALFM-FUNC OFFEXITMENUSOFTWARE VERSION 7071 V1.0 SOFTWARE VERSION 7071 V1.0IR CHANNEL CH AAV SYSTEM AV1/2/3MIRROR OFFSCREEN OFFDIMMER MANUALFM-FUNC ONEXITMENUIR CHANNEL CH BAV SYSTEM AV1 / 2 / 3MIRROR OFFSCREEN OFFDIMMER MANUALFM-FUNC OFFEXITMENUSOFTWARE VERSION 7071 V1.0 SOFTWARE VERSION 7071 V1.0IR CHANNEL CH AAV SYSTEM AV1/2/3MIRROR OFFSCREEN OFFDIMMER MANUALFM-FUNC ONEXITMENUIR CHANNEL CH BAV SYSTEM AV1 / 2 / 3MIRROR OFFSCREEN AUTODIMMER MANUALFM-FUNC ONEXITMENUIR CHANNEL CH OFFAVSYSTEM AV1/2/3MIRROR OFFSCREEN ONDIMMER MANUALFM-FUNC ONEXITMENUSOFTWARE VERSION 7071 V1.0 SOFTWARE VERSION 7071 V1.0 SOFTWARE VERSION 7071 V1.0Basic Functions :
Highlights:7" Active TFT LCDAS700 with built-in FMMAS700- Without FMM- Can be use for visor monitorMonitor can be turned ON when Parking is high or floatingMonitor will shut down when parking is set to Low.Front access AUX and Headphone jacksNo AV BoxVery competitive costHS3.1 replacementA/V Input and Output:Input:Input from DVD loader (RCA)Input from Game Console or the second DVD player (RCA)Front bezel Aux inputOutput:Diver side FMM for AudioDriver and Passenger side IR audioFront bezel earphone10This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCCrules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void yourauthority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device maynot cause harmful interference and (2) this device must accept any interference received, including interference that may causeundesired operationFCC RF Radiation Exposure Statement:1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipmentshould be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Navigation menu