TENDA TECHNOLOGY W316R 150Mbps Wireless‐N Router User Manual

SHENZHEN TENDA TECHNOLOGY CO., LTD. 150Mbps Wireless‐N Router

Users Manual

11N Wireless Broadband Router User Guide 1 Wireless-N Broadband Router W316R Notice： RF Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
11N Wireless Broadband Router User Guide 2 Copyright Statement is the registered tr ademark of Shenzhen Tenda Technology Co., Ltd. All the products and product names men tioned herei n are the tr ademarks or registered t rademarks of thei r respecti ve holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. Without the permission of Shenzhen Tenda Technology Co., Ltd, any individual or party is not allowed to copy, plagiarize, reproduce or translate it into other languages. All t he p hotos a nd p roduct s pecifications me ntioned in this manual are for references only. Upgrades of software and hardware may occur, and if there are changes, Tenda is not responsible for notifying in advance. If you would like to know more about our product information, please visit our website at www.tenda.cn.
11N Wireless Broadband Router User Guide 3Contents CHAPTER 1 PRODUCT INTRODUCTION.........................................1 1.1 PACKAGE CONTENTS.............................................................................2 1.2 LED INDICATORS AND PORT DESCRIPTION ......................................2 CHAPTER 2 PRODUCT INSTALLATION............................................5 CHAPTER 3 HOW TO CONFIGURE TO ACCESS THE INTERNET...................................................................................................7 3.1 HOW TO SET THE NETWORK CONFIGURATIONS...............................7 3.2 LOG IN TO THE ROUTER......................................................................14 3.3 FAST INTERNET ACCESS ......................................................................16 3.4 FAST ENCRYPTION ...............................................................................18 CHAPTER 4 ADVANCED SETTINGS................................................19 4.1 SYSTEM STATUS.....................................................................................19 4.2 WAN SETTINGS....................................................................................21 4.3 LAN SETTINGS.....................................................................................28 4.4 DNS SETTINGS.....................................................................................29 4.5 BANDWIDTH CONTROL .......................................................................30 4.6 TRAFFIC STATISTICS .............................................................................35 CHAPTER 5 WLAN SETTINGS.............................................................37 5.1 WIRELESS BASIC SETTINGS..................................................................37 5.2 WIRELESS SECURITY SETTINGS...........................................................43 5.2.1 WPS SETTINGS ..................................................................................44 5.3 WIRELESS ACCESS CONTROL ..............................................................48 5.4 CONNECTION STATUS..........................................................................49 CHAPTER 6 DHCP SERVER..................................................................49
11N Wireless Broadband Router User Guide 46.1 DHCP SETTINGS..................................................................................49 6.2 DHCP CLIENT LIST.............................................................................50 CHAPTER 7 VIRTUAL SERVER...........................................................52 7.1 PORT RANGE FORWARDING ...............................................................52 7.2 DMZ SETTINGS....................................................................................56 7.3 UPNP SETTINGS ..................................................................................57 CHAPTER 8 SECURITY SETTINGS....................................................58 8.1 CLIENT FILTER SETTINGS....................................................................58 8.2 MAC ADDRESS FILTER........................................................................60 8.3 URL FILTER SETTINGS........................................................................63 8.4 REMOTE WEB MANAGEMENT............................................................65 CHAPTER 9 ROUTING SETTINGS.....................................................68 9.1 ROUTING TABLE...................................................................................68 9.2 STATIC ROUTING..................................................................................68 CHAPTER 10 SYSTEM TOOLS..............................................................70 10.1 TIME SETTINGS...................................................................................70 10.2 DDNS..................................................................................................71 10.3 BACKUP/RESTORE .............................................................................73 10.4 RESTORE TO FACTORY DEFAULT.....................................................77 10.5 UPGRADE.............................................................................................77 10.6 REBOOT THE ROUTER........................................................................78 10.7 PASSWORD CHANGE...........................................................................79 10.8 SYSLOG.................................................................................................81 10.9 LOG OUT..............................................................................................82 APPENDIX 1 GLOSSARY.......................................................................83
11N Wireless Broadband Router User Guide 5APPENDIX 2 PRODUCT FEATURES.................................................85 APPENDIX 3 FAQ....................................................................................86 APPENDIX 4 CLEAR WIRELESS CONFIGURATION...................90 APPENDIX 5 REGULATORY INFORMATION...............................94
11N Wireless Broadband Router User Guide 1 Chapter 1 Product Introduction Thank y ou for purchasing the T enda W316R Wireless Broadband Router! This easy -to-use router provi des si mple configuration interface which enables you to configure it with ease. It i s based on the l atest IEEE802. 11n standard, and i s backward compatible with devi ces of IEEE802.11b/g standards. The W316R，including router, wireless AP, four-port switch and fi rewall in on e，provides powerful online monitor function and supports URL filter and MAC filter. With WDS function, it can repeat an d amplify wireless signals so as to enlarge network coverage area. It truly supports UPnP and WMM to make your audio and video smoother. With QoS function, it can efficiently distribute the downloading rate for the clients. Additionally, with super compa tibility, the r outer can break the access limits i n so me areas so that mul tiple computers can share the Internet access.
11N Wireless Broadband Router User Guide 21.1 Package Contents Please veri fy the fol lowing i tems afte r you open the package: ¾ One W316R Wireless Broadband Router ¾ One Quick Installation Guide ¾ One Power Adapter ¾ One Software CD If any of the l isted i tems are mi ssing or damag ed, please contact the T enda resel ler for immediate replacement. 1.2 LED Indicators and Port Description Panel and LED indicators show:
11N Wireless Broadband Router User Guide 3LED indicator description on the front panel Back panel port show
11N Wireless Broadband Router User Guide 4 Back panel port description
11N Wireless Broadband Router User Guide 5 Chapter 2 Product Installation 1. Please use only the included power adapter to power y our r outer. ( NOTE: Use of an unmatched power adapter could cause damage to this product). 2. Pl ease connect the router ’s LA N port to your computer with an Ethernet cable as shown below.
11N Wireless Broadband Router User Guide 63. Please connect your broadband line provided by your ISP to the router’s WAN port. 4. Insert the included software CD into the CD drive of your computer . After t he software automati cally initiates, double click the “Setup” icon and follow the instructions to compl ete the i nstallation. You can a lso enter the router ’s W eb-based Uti lity to compl ete the configuration.
11N Wireless Broadband Router User Guide 7 Chapter 3 How to configure to access the Internet 3.1 How to Set the Network Configurations Network Configurations under windows XP 1. Right click “My Network Places” on your computer desktop and select “Properties”. 2. Right cli ck “ Local Area Connection ” and sel ect “Properties”.
11N Wireless Broadband Router User Guide 8 3. S elect “ Internet Pro tocol (TCP/IP) ” and click “Properties”. 4. Select “Obtain an IP address automatically” and
11N Wireless Broadband Router User Guide 9“Obtain D NS ser ver addr ess automatically ”. Click “OK” to save the configurations. Or select “Use the following IP address ” and enter the IP addr ess, Subnet mask, Defaul t gatewa y a s follows: ¾ IP Address: 192.168.0.XXX: (XXX i s a number from 2~254) ¾ Subnet Mask: 255.255.255.0 ¾ Gateway: 192.168.0.1 ¾ DNS se rver: You s hould in put t he DNS s erver address provided by your IS P. Otherwise, you can enter 1 92.168.0.1. Cli ck “OK” to save the configurations.
11N Wireless Broadband Router User Guide 10 Network Configurations under windows 7 1. Click the network icon on the l ower ri ght corner of your computer desktop, and then cli ck” Open Network and Sharing Center”.
11N Wireless Broadband Router User Guide 11 2. Click “Change adapter settings” on the left side of the window. 3. Ri ght click “Local Area Connecti on” and sel ect “Properties”.
11N Wireless Broadband Router User Guide 12 4. Double click” Internet Protocol Version 4(TCP/IPv4)".
11N Wireless Broadband Router User Guide 135. Select “Obtain an IP address automatically” and “Obtain D NS ser ver addr ess automatically ”. Click “OK” to save the configurations. Or select “Use the following IP address ” and enter the IP addr ess, S ubnet mask, D efault gatewa y as follows:
11N Wireless Broadband Router User Guide 14 ¾ IP Address: 192.168.0.XXX: (XXX i s a number from 2~254) ¾ Subnet Mask: 255.255.255.0 ¾ Gateway: 192.168.0.1 ¾ DNS se rver: You s hould in put t he DNS s erver address provided by your IS P. Otherwise, you can enter 1 92.168.0.1. Cli ck “OK” to save the configurations. 3.2 Log in to the Router 1. To access the R outer’s Web-based Utility, launch a web browser such as Internet Explorer or Firefox and enter http://192.168.0.1. Press “Enter”.
11N Wireless Broadband Router User Guide 15 2. Type “admin” in the “Password” field. Click “OK”. 3. If you enter the correc t password, you will come to the router’s web-based utility as is shown below.
11N Wireless Broadband Router User Guide 16 3.3 Fast Internet Access Two kinds of fast access methods are provided on the router’s web-based utility: ADSL dial-up and DHCP. If you select ADSL dial-up, you only need to enter the access accou nt and access password as we ll as the wireless password, and then click “Ok” to complete the settings. If you select DHCP, you only need to enter the wireless password and click “Ok” to complete the settings.
11N Wireless Broadband Router User Guide 17 The defaul t access meth od i s A DSL dial-up and the access account and access password are the same as the ADSL dial-up account and password, which you can inquire your broadband ISP. For other access methods, please refer t o WAN settings in chapter 4.The wi reless password can only consist of 8 characters, the default is 12345678 and you can modify it when necessary.
11N Wireless Broadband Router User Guide 18 3.4 Fast Encryption The router provi des two encryption s etting screens, one i s si mple and easy , the other i s adv anced (For advanced setting, please refer to chapter 5.2). Simple and easy screen: Log on to the router’s web-based utility and you may set encrypti on for the router. The defaul t adopts WPA-PSK mode and A ES Al gorithm. The def ault password is 12345678, as shown below. NOTE: The wi reless password can onl y be 8 characters in length and t he default is 12345678, you can modify it when necessary.
11N Wireless Broadband Router User Guide 19 Chapter 4 Advanced Settings 4.1 System Status System status screen al lows you to view the route r’s WAN port status and system status.  Connection status: It di splays the router ’s WAN connection status. Disconnected: It i ndicates the router ’s W AN por t hasn’t been connected with the network cable. Connecting: It i ndicates the router ’s WAN port i s obtaining IP address. Connected: It i ndicates the R outer i s well connected with the ISP.  WAN IP：IP address obtained from ISP.  Subnet mask: Obtained from ISP.  Gateway: Obtained from ISP.  DNS server: Obtained from ISP.  Alternate DNS server: Obtained from ISP.
11N Wireless Broadband Router User Guide 20 Connection type: It displays your current access method.  LAN MAC address ：It displays the R outer’s LAN MAC address.  WAN MAC address：It displays the Router’s WAN MAC Address.  System t ime：It di splays the syste m’s updat ed time  Connected client ：It displays the number of the connected c omputers(normally it displ ays the number of clients whose IP addresses obtained via DHCP server)  Software v ersion ：It di splays t he R outer’s software version；  Hardware v ersion：It di splays the R outer’s hardware version.
11N Wireless Broadband Router User Guide 21 4.2 WAN Settings Virtual Dial-up (PPPoE) ¾ Mode: Show your current connection mode. ¾ Access Ac count: Enter the account provided by your ISP. ¾ Access Password: Enter the passwo rd provided by your ISP. ¾ MTU: Maximum Transmission Unit. It is the size of the largest data packet that can be sent o ver the
11N Wireless Broadband Router User Guide 22network. The default value is 1492. Do NOT modify it unless necessary, but if a specific website or web application s oftware c annot o pen o r b e e nabled, you can try to change the MTU value to 1450, 1400, etc. ¾ Service Name: The connecti on name for current PPPOE, enter i t if necessary ，otherwise, l eave it blank. ¾ AC Name: The service name, enter it if necessary，otherwise, leave it blank. ¾ Connect Automatica lly: Connect automati cally to the Inter net after rebooti ng the system or connection failure. ¾ Connect on Deman d: R e-establish your connection to the Internet after the speci fic time (Max Idle Time). Zero means you are connected to the Internet al l ti mes. Otherwi se, enter the minutes to be elapsed before you are disconnected from the Internet. ¾ Connect Manually: Connect to the Internet by users manually. ¾ Connect on Fixed Time: Connect to the Internet during the time you fix automatically. NOTE: The “ Connect on Fixed Time ” goes i nto effect only when you have set the current time in “Time
11N Wireless Broadband Router User Guide 23settings” from “System tools”. Static IP If your ISP provides you the stati c IP, pl ease cho ose static IP, and you need to enter the IP address, subnet mask, gateway, DNS serv er and al ternate DNS server provided by your ISP or network administrator。 ¾ Mode: Show your current connection mode. ¾ IP address: Enter the WAN IP address provided by your ISP. If y ou are not c lear, please inquire your local ISP. ¾ Subnet ma sk: Enter the W AN S ubnet Mask provided by your ISP. Generally it is 255.255.255.0。 ¾ Gateway: Enter the Gateway provided by your ISP. If you are not clear, please inquire your local ISP.
11N Wireless Broadband Router User Guide 24¾ DNS serv er: Enter th e necessary DNS server provided by your ISP. ¾ Alternate DNS serv er: Enter the second DNS address if your ISP provides, which is optional. Dynamic IP (Via DHCP) If your connection mode is Dynamic IP, it means every time you access the Internet, you will get a different IP. You don’t need to en ter any parameters in this mode, just Click “Ok” to finish the settings. PPTP
11N Wireless Broadband Router User Guide 25 ¾ Mode: Show your current connection mode. ¾ PPTP server address: The IP address or domain name o f t he d estination server a nd it is u sed t o specify the desti nation addres s whi ch needs fo r PPTP connection. ¾ Username/Password: Used to v alidate i dentity when connecting to the PPTP server. ¾ Address mode: Set the router’s IP address mode, you can select either “Dynamic” or “Static”. If your ISP doesn’ t provide the IP addre ss, pl ease sel ect “Dynamic”. ¾ IP address: Please enter the IP address provided by your ISP, inquire your local ISP if you are not clear.
11N Wireless Broadband Router User Guide 26¾ Subnet mask: Pl ease enter the subnet mask provided by your ISP ,generally its 255.255.255.0 ¾ Gateway: Please enter the gateway provided by your ISP, inquire your local ISP if you are not clear. All the above parameters are provided by ISP. L2TP ¾ Mode: Show your current connection mode. ¾ L2TP server address: The IP address or domain name o f t he d estination server a nd it is u sed t o specify the desti nation addres s whi ch needs fo r L2TP connection. ¾ Username/Password: Used to v alidate i dentity
11N Wireless Broadband Router User Guide 27when connecting to the L2TP server. ¾ Address mode: Set the router’s IP address mode, you can select either “Dynamic” or “Static”. If your ISP doesn’ t provide the IP addre ss, pl ease sel ect “Dynamic”. ¾ IP address: Please enter the IP address provided by your ISP, inquire your local ISP if you are not clear. ¾ Subnet mask: Pl ease enter the subnet mask provided by your ISP ,generally its 255.255.255.0 ¾ Gateway: Please enter the gateway provided by your ISP, inquire your local ISP if you are not clear. All the above parameters are provided by ISP.
11N Wireless Broadband Router User Guide 28 4.3 LAN Settings Click “ Advanced s ettings” –LAN s ettings to enter the following screen. ¾ LAN MAC address: The Router’s LAN MAC address, which is unchangeable. ¾ IP address: The Router’s LAN IP address (not your PC’s IP address).The default value is 192.168.0.1; you can change it when necessary. ¾ Subnet mask: The Router’s LAN subnet mask. The default value is 255.255.255.0 NOTE: Once you modify the IP address, you need to remember it for next time you log in to the web-based utility.
11N Wireless Broadband Router User Guide 29 4.4 DNS Settings DNS stands for Domain Name System (or Service). ¾ DNS setting: Select to enable the DNS server. ¾ Primary DNS address: Enter the necessary address provided by your ISP. ¾ Alternate DNS address : Enter the s econd DNS address if your ISP provides, which is optional. NOTE: After the settings are completed, reboot the device to activate the modified settings.
11N Wireless Broadband Router User Guide 30 4.5 Bandwidth Control Bandwidth control is used to limit the communication traffic of LAN computers when accessing the Internet. It can simultaneously control maximum of 254 PCs' traffic. In addi tion, IP addres s r ange configuration i s supported. ¾ Enable Bandwidth Control: To enable or disable the i nternal IP bandwi dth control. The defaul t is disabled. ¾ IP Address: The IP add ress r ange of the hosts whose traffic has been controlled. It can be a single IP address or IP address range. ¾ Upload/Download: To specify the traffic heading way for the sel ected I P addre sses: upl oad or
11N Wireless Broadband Router User Guide 31download. ¾ Bandwidth Range: The maximum and minimum upload/download data tr affic of the hosts i n specified IP range. The unit is KByte/s. The uplink of upload and downl oad can not exceed the W AN port bandwidth limitation range. ¾ Enable: To enabl e th e current edited rul e. Otherwise, the rule will not go into effect. ¾ Add to list: After you edit the rule, click the “add to list” button to add th e current rul e to the rul e list. Here we take 2Mbps b andwidth as an example . Theoretically, the bi ggest downl oading rate for 2Mb ps bandwidth is 2Mb ps=256KByte/s, and the bi ggest uploading rate is 512kbps=64KByte/s Example 1 If you want to set the download rate of the computer at the IP ad dress of 192 .168.0.100 a s 80-90KByt e/s, upload rate as 10-15KByte/s, first add one upload rule as shown in the picture below:
11N Wireless Broadband Router User Guide 32 1.Enter 192.168.0.100 in the IP address field 2.Select upload in the Upload/Download field. 3.Enter 10-15 in the bandwidth range field 4.Select “Enable” 5.Click “Add to list” 6.Click “Ok” to finish the upload rule settings. And then add a download rule as shown in the picture below.
11N Wireless Broadband Router User Guide 33 The setting method is the same as the above. Example 2 Set the downl oad rate of all computers within the r ange of 192 .168.0.2--192.168.0.254 as 100-120KByte/s, and the upload rate as 20-30KByte/s, as shown in the picture below.
11N Wireless Broadband Router User Guide 34 The setting method is the same as Example 1.
11N Wireless Broadband Router User Guide 35 4.6 Traffic Statistics Traffic statistics is used to display the bandwidth that LAN PC used. Enable Traffic statistics: It is used to calculate the traffic used by the LAN computers. You can enable it to calculate the tr affic for you. Usua lly, di sable it to improve the router’s data packet processing ability, and the default is disabled. When thi s function is enabled, the webpage will refresh automatical ly e very five minutes, meanwhile, each computer’s traffic value will refresh automatically. ¾ IP address: the IP address of the computer whose traffic is being calculated. ¾ Uplink rate: the data sendi ng speed per second, the unit is KByte/s. ¾ Downlink rate: the data recei ving spee d p er
11N Wireless Broadband Router User Guide 36second, the unit is KByte/s. ¾ Sent mess age: the number of the cal culated computer’s data packets that are sent out through the router. ¾ Sent Byt es: the vol ume of the cal culated computer’s statistics that i s sent out through the router ¾ Received message: the number of the calculated computer’s t he data pac kets that are recei ved through the router. ¾ Received B ytes: the vol ume of the cal culated computer’s s tatistics that i s received through the router.
11N Wireless Broadband Router User Guide 37 Chapter 5 WLAN Settings 5.1 Wireless Basic Settings ¾ Enable wireless functio n: Select t o enable the Router’s wi reless features; desel ect to di sable it and all functions related with wireless are disabled. ¾ Wireless working mode : T his r outer p rovides two ki nds o f worki ng modes: Wi reless Access Point(AP) and Network Bridge (WDS) Wireless Access Point (AP) ¾ Network Mode : Se lect one mode from the
11N Wireless Broadband Router User Guide 38drop-down list. 11b mode：Select it if you have only Wireless-B clients in your network. 11g mode：Select it if you have only Wireless-G clients in your network. 11b/g mixed mode: Select it i f you h ave o nly Wireless-B and Wireless-G clients in your network. 11b/g/n mixe d mode : Select it if y ou have Wireless-B, Wireless-G and Wi reless-N cli ents in your network. ¾ SSID: It is the un ique name of t he wi reless network and can be mod ified. The S SID must be entered. ¾ Broadcast (SSID): Select “Enable” to enable the router’ SSID to be scanna ble by wi reless devices. The defaul t i s enabl ed. If you di sable i t, the wireless de vices must know the S SID for communication. ¾ Channel: The currently used channel by the router. Select an effective channel (from 1 to 13\Auto) of the wireless network. ¾ WMM Capable: Enable it to enhance the transfer performance of the wi relessly tr ansferred multimedia data ( such a s video o r o nline playing).We recommend enabling this option if you are not familiar with WMM.
11N Wireless Broadband Router User Guide 39¾ APSD Capa ble: It is used for auto power-saved service. The default is disabled. ¾ Channel b andwidth: Select an appropriate channel ba ndwidth to enhance the wi reless performance. Select 20/40M when the network has 11b/g and 11n wi reless clients. Select 20M when the network has onl y n on-11n wi reless cl ients. Select 20/40M to promote its throughput when the wireless network is in 11n mode. ¾ Extension Channel: T o confi rm th e network’ s frequency range in 11n mode. Network Bridge (WDS) Settings WDS (Wireless Distribution System) is used to expand wireless coverage area.
11N Wireless Broadband Router User Guide 40 ¾ AP MAC ad dress: Input the MA C address of another (opposi ng) w ireless router y ou w ant to connect. Example: This example is to bridge two 316R routers. 1. If you know the connecti ng router ’s MA C address, please enter i t into the AP MAC address field and click “Ok”.
11N Wireless Broadband Router User Guide 41 2. You can also search for the wireless router’s signal by scanning. a) Click “Open scan” and cl ick the scanned si gnal and click the ”O k” button on the di alog bo x and the corresponding wi reless MA C address will be added to the AP MAC address field automatically.
11N Wireless Broadband Router User Guide 42 b) Click “Ok” after the MAC address is added.
11N Wireless Broadband Router User Guide 43 After fi nishing the abo ve steps, you need to set the other W316R router in the same way. NOTE: WDS feature requi res both routers support this function and the SSID, channel, encryption method and password are the same as those of the connecting router. 5.2 Wireless Security Settings With the wi reless securi ty funct ion, y ou can prev ent others from connecti ng to y our wi reless network and using the n etwork resources wi thout your cons ent. Meanwhile, you can al so bl ock ill egal users from
11N Wireless Broadband Router User Guide 44intercepting or intruding your wireless network. 5.2.1 WPS Settings WPS (Wi-Fi Protected Setting) makes it quick and easy to establish a secure con nection between the wi reless clients and the router . The users onl y need to ente r a PIN cod e or press W PS b utton on the back panel to configure it without ma nually s electing a n e ncryption method or set a key. ¾ WPS settings: To enable or disable WPS function. The default is “Enable”.
11N Wireless Broadband Router User Guide 45¾ WPS mode: Provide two ways: PBC (Push-Button Configuration) and PIN code. ¾ PBC: Select the PBC and cli ck Ok, or press and hold the WPS button on the back panel of the device for about one second. The WPS LED indicator will be fl ashing for 2 mi nutes, whi ch means t he WPS is e nabled. Du ring t his t ime (flashing W PS L ED), you can e nable t he wir eless client to implement the WPS/PBC negoti ation between the m. When the WPS connecti on is completed, the LED indicator will be continuously lit. To add more clients, repeat the above steps.) ¾ PIN: If this option is enabled, you need to enter a wireless client’s PIN code in the field and keep the same code in the WPS client. ¾ Reset OOB: Press this button, the WPS client will be in an idle state, and the WPS indicator will turn off. AP will not respon d to the W PS cli ent’s connection request an d will set the securi ty mode as Open-None (Disable) mode. NOTE: The use of WPS function requires the wireless adapter to support this function. 5.2.2 WPA- PSK WPA guarantees to protec t WLAN users’ data and o nly the authorized network users can have access to WLAN.
11N Wireless Broadband Router User Guide 46 ¾ WPA Algor ithms: Provides TKI P [Temporal K ey Integrity Pro tocol] or AE S [Adv anced Encrypti on Standard]. ¾ Key: Enter the pass phr ase that consi sts of 8-63 ASCII characters. ¾ Key Renewal Inter val: Set the key’ s renewal period, which tells the device how often it should change the dynamic keys.
11N Wireless Broadband Router User Guide 47 5.2.3 WPA2- PSK WPA2 (Wi -Fi Protected Access versi on 2) pro vides higher security than and WPA (Wi-Fi Protected Access). ¾ WPA Algor ithms: Provides TKI P [Temporal K ey Integrity Pro tocol] or AE S [Adv anced Encrypti on Standard]. ¾ Key: Enter the pass phr ase that consi sts of 8-63 ASCII characters. ¾ Key Renewal Inter val: Set the key’ s renewal period, which tells the device how often it should change the dynamic keys.
11N Wireless Broadband Router User Guide 48 5.3 Wireless Access Control Wireless access control is actual ly based on the MAC address to permit or forbid specific clients to access the wireless network. ¾ MAC address filter: “Permit” indicates to allow the clients in the list to access the wireless network, “Forbid” indicates to prevent the clients in the list from accessing the wireless network. ¾ Configure MAC address: Input the MAC addresses of the wireless clients to implement the filter policy . Click “ Add” to fi nish the MAC add operation. ¾ MAC Address list: S how the added MA C addresses. You can add or delete them.
11N Wireless Broadband Router User Guide 495.4 Connection Status This screen shows wi reless cl ient’s connecti on status, including MAC address, Channel bandwidth. ¾ MAC addres s: Shows the MAC addre sses of the hosts connected to the Router. ¾ Bandwidth: Shows the channel bandwidth of the current connected hosts (wireless clients). Chapter 6 DHCP Server 6.1 DHCP Server DHCP (Dynamic Host Control Protocol) is used to assign an IP addr ess to the co mputers on the LAN/pri vate network. When you enable the DHCP Server, the DHCP Server will allocate automatically an unused IP address from the IP address pool to the requesting computer in
11N Wireless Broadband Router User Guide 50premise of acti vating “Obtai n an IP Address Automatically”. So specifying the start and end address of the IP Address pool is needed. ¾ DHCP s erver: Check the Enable box to enabl e DHCP server. ¾ IP pool start/end address: Enter the range of IP addresses for DHCP server distribution. ¾ Lease time: It i ndicates the v alid t ime of the dynamic IP address whi ch i s d istributed to the DHCP c lient’s host com puter by DHCP serv er. During this time, the serv er will not distribute the IP address to any other host computer. 6.2 DHCP Client List DHCP cli ent list di splays user comput er’ IP a ddress, MAC address, host name and other i nformation which
11N Wireless Broadband Router User Guide 51are assi gned by the DHCP server . Y ou can manu ally enter the IP and MAC address and convert them to static assignment. ¾ Host name: It displays the name of the computer whose IP is allocated by the DHCP server. ¾ IP address: Enter the I P add ress w hich needs static binding. ¾ MAC address: Enter th e MAC address of the computer you want to bind. Click “Add” to add the entry in the list. ¾ Lease time: The r emaining t ime length o f t he corresponding IP address lease.
11N Wireless Broadband Router User Guide 52 Chapter 7 Virtual Server 7.1 Port Range Forwarding ¾ Start/End port: Enter the start/end port number which r anges the Externa l ports used to set th e server or Internet applications. ¾ LAN IP: Enter the IP address of the PC which you want to set as the server. ¾ Protocol: Select the prot ocol (TCP/UDP/Both) for the appl ication. If you a re not cl ear about the
11N Wireless Broadband Router User Guide 53protocol you are using, you can select “Both”. ¾ Enable: Click the Enable checkbox to bring the set rule into effect. ¾ Delete: Clear all settings of this item. ¾ Well-known service port: The well -known protocol ports are listed in the drop-down li st. Select one and select a sequence number in the ID drop-down list and then click “Add”, this port will be added automatically to th e ID l ist. For other wel l known servi ce ports that are not l isted, y ou can manually add them to the list. ¾ Add to: Add the sel ected well-known port to the policy ID. For Example: You want to share some large files with your friends outside of your local area network, however, they are too bi g, and it’s not con venient to tr ansfer them. Then, you can b uild a F TP server on y our computer and set the router’s port range forwarding to enable your friends to ac cess to thes e fil es on your computer. Suppose that your F TP server or your computer’s static IP addr ess is 192.168.0.10, and you wish your fr iends can ac cess the s erver through the default port 21 and adopts TCP protocol. Please follow the steps below to configure. 1.Enter 21 in both start port and end port fields, or you can al so sel ect F TP from the wel l-known servi ce port
11N Wireless Broadband Router User Guide 54and its port 21 will be added to the corresponding field automatically. 2. Enter 192.168.0.10 in the LAN IP col umn, and then select “Both” as the protocol and select “Enable”. 3. As the picture shown below. 4. Click the “Ok” button to save the settings. And now, when your friends want to visit the FTP server, they only need to enter ftp://xxx.xxx.xxx.xxx:21 in the address field. Here, xxx.xxx.xxx.xxx means the router’s WAN IP address. For example, when your router’s WAN IP address is 172.16.102.89; your friends need to enter
11N Wireless Broadband Router User Guide 55ftp://172.16.102.89:21 in the address field. NOTE: If you set the service port of the virtual server as 80, you must set the Web management port on Remote Web Management screen to be any value except 80 such as 8080. Otherwise, there will be a conflict to disable the virtual server.
11N Wireless Broadband Router User Guide 567.2 DMZ Settings The DMZ Settings screen all ows one local computer to be exposed to the Internet for use of a special-purpose service such as Internet gaming or vi deoconferencing. DMZ hosting forwards all the ports at the same time to one PC. ¾ DMZ Host IP Address: The IP address of the LAN computer you want to set as DMZ host. ¾ Enable: Check to enable the DMZ host. For example: Set the computer at the IP address of 192.168.0.10 as DMZ host to connect another host on the Internet for intercommunication. NOTE: When the DMZ host i s enabled, the firewall settings of the DMZ host will not function.
11N Wireless Broadband Router User Guide 57 7.3 UPNP Settings UPnP (Universal Plug and Play).With the UPnP function, the internal host can request the router to process some special port switching so as to enable the external host to visit the resources of the internal host. ¾ Enable UPnP: Cli ck the checkbox to enabl e the UPnP. NOTE: This function goes into effect under Windows XP or Windows ME (NOTE: the system should integrate or have installed the Directx 9.0) or this function would go in to e ffect if y ou h ave in stalled s oftware t hat supports UPnP.
11N Wireless Broadband Router User Guide 58 Chapter 8 Security Settings 8.1 Client Filter Settings You can ena ble cli ent f ilter to control LAN computers’ access to some ports of the Internet。 ¾ Filter Mode: You can select either “Permit only” or “Forbid only”. ¾ Access Poli cy: Sel ect one number from the drop-down list. ¾ Remark: A simple description of the configured file. You can also leave it blank. ¾ Start/End IP: Enter the start/end IP address.
11N Wireless Broadband Router User Guide 59¾ Port: Enter the controll ed TCP/UDP protocol port. You can specify a port or port range. ¾ Type: Sel ect one protoco l (T CP/UDP/Both) from the drop-down list. ¾ Time: Select the time range of client filter. ¾ Date: Select the day(s) to run the access policy. ¾ Enable: T o e nable/disable t he a ccess p olicy (forbid/permit the pack ets matched wi th the access policy to pass through the router. Example1 Forbid LAN computers at the IP addresses of 192.168.0.100--192.168.0.120 to access the Internet. Example 2 Permit LAN computer with the IP address of 192. 168.0.145 to ac cess websi tes during 8:00 to
11N Wireless Broadband Router User Guide 6018:00 from Sunday to Saturday. 8.2 MAC Address Filter You can limit the computer’s access to Internet by MAC Address Filter.
11N Wireless Broadband Router User Guide 61 ¾ Filter mode: You can select either “Permit only” or “Forbid only”. ¾ Access Poli cy: Sel ect one number from the drop-down list. ¾ Remark: A simple description of the configured file. You can also leave it blank. ¾ MAC Address: Enter the MAC address you want to run the access policy. ¾ Time: S elect the ti me r ange of M AC address filter. ¾ Date: Select the day(s) to run the access policy. ¾ Enable: T o e nable/disable t he a ccess p olicy (forbid/permit the pack ets matched wi th the access policy to pass through the router). Example 1 Forbid the computer with the MAC address
11N Wireless Broadband Router User Guide 62of 00:E0:4C:69:A3:23 to access Internet during 8:00 to 18:00 from Monday to Friday. Example 2 Permit the computer with the MAC address of 00 ：E4：A5：44：35：69 to access Internet from Monday to Friday.
11N Wireless Broadband Router User Guide 63 8.3 URL Filter Settings You can use URL fil tering to forbi d t heir access to certain websites at a specified time. ¾ Filter Mode: You can select either “Permit only” or “Forbid only”. ¾ Access Poli cy: Select one number from the drop-down list. ¾ Remark: A simple description of the configured file. You can also leave it blank. ¾ Start/End IP: Enter the start/end IP address. ¾ URL character string: Specify the text strings or keywords needed to be filtered.
11N Wireless Broadband Router User Guide 64¾ Time: Select the time range of URL filter. ¾ Date: Select the day(s) to run the access policy. ¾ Enable: To enable/disable the access policy (forbid /permit the packets matched with the access policy to pass through the router). Example1 Forbid all co mputers on LAN to acce ss baidu.com during 8:00 to 18:00 from Monday to Friday. Example2 P ermit LAN computers wi th the IP addresses of 192. 168.0.100-192.168.0.115 to acc ess yahoo.com.
11N Wireless Broadband Router User Guide 65 NOTE: Enter only one domain name for each access policy for one access policy can only filter one domain name. So, if you want to filter multiple domain names, you need to set multiple access policies 8.4 Remote Web Management This secti on i nstructs how to al low the network administrator to manage the R outer r emotely. If y ou want to acc ess the R outer from outs ide of the local network, please click the checkbox after “Enable”.
11N Wireless Broadband Router User Guide 66 ¾ Enable: Check to enabl e remote web management. ¾ Port: The management port open to outside access. The default value is 80. ¾ IP Address: Specify the range of the IP addresses of the computers on the Internet for remote management. NOTE: 1. If you want to l og in the devi ce’s Web-based Utility via port 8080, you need to use the format of WAN IP address: port (for exampl e http ：//220.135.211.56:8080) to implement remote login. 2. If your W AN IP addre ss starts and ends wi th 0.0.0.0, i t means al l hosts on the Internet ca n implement r emote W eb management. If you change the Internet IP address as 218.88.93.33-218.88.93.35, then onl y the computers at the IP addresses of 218. 88.93.33, 218.88.93.34 and 218. 88.93.35 can access the
11N Wireless Broadband Router User Guide 67Router to implement remote web management. For example: If you want to configure the computer at the IP address of 218.88.93.33 to access the router’s web-based utility via port 8080, please set the parameters as above.
11N Wireless Broadband Router User Guide 68 Chapter 9 Routing Settings 9.1 Routing Table This page shows the router’s core routing table. The main duty for a router is to look for a best path for every data p acket, and tr ansfer thi s data packet to a destination station. In order to fulfill this function, many transferring paths, i.e. routing table, are saved in the router, for choosing when needed. 9.2 Static Routing This screen is used to set the router’s static routing. A static route is a pre-determined pathway that network information must t ravel to r each a specific h ost o r network.
11N Wireless Broadband Router User Guide 69 Destination network IP address : T he destination host or IP segment you visit. Subnet mask: Enter the subnet mask, generally it is 255.255.255.0 Gateway: The entry IP address of the next router. NOTE: 1. The gateway must be at the same net segment with the router’s LAN IP. 2. If the des tination IP addres s i s one host ’ address, then the subnet mask must be 255.255.255.255. 3. If the destination IP address is an IP segment, then it must match with the subnet mask. For example, if the destination IP is 10.0.0.0 then the subnet mask must be 255.0.0.0
11N Wireless Broadband Router User Guide 70 Chapter 10 System Tools 10.1 Time Settings This secti on is to confi gure the router ’s system ti me. You can set it manually or obtain the GMT time from the Internet. ¾ Time zone: Select the time zone where you are operating the Router from the drop-down list. ¾ Customized time: Enter the ti me you wi sh to configure. NOTE: When the Router is powered off, the time settings will be l ost. The router will obtai n the GMT ti me automatically when you next ti me access the
11N Wireless Broadband Router User Guide 71Internet. Only when you connect to the Internet and obtai n the GMT ti me or set the time on thi s screen, can the ti me set tings in othe r funct ions (e.g. security settings) take effect. 10.2 DDNS The DDNS (Dynam ic Domain N ame S ystem) is supported in this Router. It is used to assign a fixed host and domai n name to a dynami c Internet IP addr ess. Every ti me you access the Internet , the dynami c domain name software installed on your host will tell the ISP’S host server i ts dyn amic IP address by sendi ng messages. And the server software i s responsi ble for providing DNS servi ce and i mplementing dynami c domain name resolution.
11N Wireless Broadband Router User Guide 72¾ Main features: 1. Mostly, your ISP provides a dynamic IP address and the DDNS is used to capture the changeable IP address and match to the fixed domain. Then users can ha ve acc ess to the In ternet to c ommunicate with others outside the network. 2. DDNS can help you to establish a virtual host in your home or company. ¾ DDNS: Click the radio button to enabl e or disable the DDNS service. ¾ Service provider: Select one from the drop-down list and click “Sign up” for registration. ¾ Username: Enter the username that y ou use to register from the DDNS provider ¾ Password: Enter the password that you use t o register from the DDNS provider ¾ Domain name: Enter the effecti ve regi stered domain name For example: Establish a Web server i n the l ocal host 192. 168.0.10 and register in 3322.org as follows: Username T enda Password 1234 56 Domain Name tenda.3322.org After mapping the port in the virtual server, and setting
11N Wireless Broadband Router User Guide 73account i nformation in DDNS serv er, y ou can then access the web page by entering http://tenda.3322.org in the address field. 10.3 Backup/Restore On thi s screen, you can back up the router’s curr ent settings or restore previous settings. ¾ Backup Setting: Click the Backup button to back up the Router’s settings and select a path to save them.
11N Wireless Broadband Router User Guide 74 Click the “Save” button to save the c onfiguration files.
11N Wireless Broadband Router User Guide 75¾ Restore Setting: Click the “ Browse” button to sel ect the backup files. Click the “ Restore” button to restore previ ous settings.
11N Wireless Broadband Router User Guide 76
11N Wireless Broadband Router User Guide 7710.4 Restore to Factory Default This screen allows you t o restore al l setti ngs to the factory default values. ¾ Restore: Click thi s butto n to restore to defaul t settings. ¾ Factory default settings: Password: admin IP address: 192.168.0.1 Subnet mask: 255.255.255.0 NOTE: After restoring to defaul t setti ngs, please restar t the router to make the default settings effective. 10.5 Upgrade By upgr ading the rout er’s software, you’ll get be tter software version and ap preciated ro uting functi on. Before upgr ading, downl oad the R outer’s softw are
11N Wireless Broadband Router User Guide 78upgrade file from our website, www.tenda.cn. ¾ Browse: Click thi s button to sel ect t he upgr ade file. ¾ Upgrade: Click this button to start the upgrading process. After the upgrade is completed, the router will reboot automatically. 10.6 Reboot the Router Reboot the router to mak e the conf iguration effective. The router will cut its WAN connec tion automat ically after rebooting.
11N Wireless Broadband Router User Guide 79 Reboot the r outer: Click th is butto n to reboot the router. 10.7 Password Change This section is to set a new password to better secu re your router and network. ¾ Old password: Enter the old password. ¾ New password: Enter a new password.
11N Wireless Broadband Router User Guide 80¾ Confirm new password: Re-enter to confirm the new password. NOTE: To secure the router and your network, it is highly recommended t hat y ou c hange t he in itial password.
11N Wireless Broadband Router User Guide 8110.8 Syslog The secti on is to vi ew th e system l og. You can view various cond itions appearing after system start, an d also check whether there’ s an attack on the network. The log can record at most 150 entries. ¾ Refresh: Click this button to update the log. ¾ Clear: Click this button to clear the current shown log.
11N Wireless Broadband Router User Guide 8210.9 Log out After all settings are finished, please click’” Log out” to exit securely and completely.
11N Wireless Broadband Router User Guide 83 Appendix 1 Glossary Channel: An instance of medium use for the pu rpose of pa ssing protocol data uni ts (P DUs) that may be used simultaneously, in the same volume of space, with other instances of medium use(on other channel s) by ot her instances of the same ph ysical layer (PHY),wi th an acceptably l ow fr ame error r atio(FER) due to mutua l interference. SSID: SSID (S ervice S et Identi fier) is the network name shared by all devi ces in a wi reless network. Y our network’s SSID should be un ique to y our network a nd identical for all devi ces wi thin the network. It is case-sensitive and must not exceed 20 characters (use any of the characters on the keyboard).Make sure this setting i s th e same for all devi ces in your wireless network. WPA/WPA2 Encryption: A security protocol for wireless networks that builds on the basic foundations of WEP. It secur es wireless data transmission by usi ng a key si milar t o WEP, but t he added str ength of W PA i s that the key changes dynamically. The changi ng key ma kes i t much mo re difficult for a hacker to learn the key and gain access to
11N Wireless Broadband Router User Guide 84the network.WP A2 i s the second gen eration of WP A security and provides a stronger encryption mechanism through Advanced Encryption Standard (AES), which is a requirement for some government users. 802,1x authentication Static W EP k ey is d ifficult t o ma nage fo r wh en y ou change the key, you will have to inform all others, and if the key is disclosed in one of the places, the key can no longer provide security. Besides, there’s severe security loophole about static WEP encryption. The WEP key can be d ecrypted after one person rec eives a speci fic amount of data vi a wi reless i ntercepting. 802, 1x i s initially used for wired Ethernet authentication access to prevent illegal users from accessing the network. Later, it is found that 802. 1x can better solve the wireless network securi ty probl em. EA P-TLS of the 80 2.1x successfully achi eves the two- way authenti cation between use rs and networks, i.e. can prevent illegal users from accessing the network and can also prevent users from accessing the ill egal AP. 802.1x utilizes dynamic WEP encrypti on to protect th e WEP key fr om being decryp ted. To sol ve the publ ishing probl em for digital certification, people make some changes to TLS authentication and TTLS and EAP come into exist, which enable you to access the network by usi ng the traditional way of aut hentication: username and password.
11N Wireless Broadband Router User Guide 85 Appendix 2 Product Features z Supports IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3 and IEEE 802.3u standards. z 5dBi hi gh gai n omn i-directional ant enna, wi th strong signals and long transmission distance. z Wireless transmission rate up to 150Mbps z Provides one 10/10 0Mbps auto -negotiation Ethernet W AN port to co nnect to the Wi de Area Network z Provides four 10/100 Mbps auto- negotiation Ethernet LAN ports to co nnect to the Local Area Network z Supports Auto MDI/MDIX z Supports xDSL/Cable MODEM, static and dynami c IP in community broadband networking z Includes router , wi reless access poi nt, fou r-port switch and firewall all in one z SupportsWPA-PSK,WPA2-PSK,andWPA-PSK&WPA2-PSK mixed security modes z Supports WPS button z Supports hidden S SID functi on and MA C address-based access control z Supports WMM to mak e your audio and vi deo smoother z Supports SNTP z Supports UPnP and DDNS
11N Wireless Broadband Router User Guide 86z Supports WDS to extend wireless network z Supports virtual server, DMZ host z Provides syslog to record the running status of the router Appendix 3 FAQ This s ection provides s ome s olutions t o t he p roblems which ma y occur duri ng the router ’s i nstallation or usage. The i nstructions below may help you deal with the problems. If your problem is not in the list, please log into our website www.tenda.cn or send an E-mail to support@tenda.cn, and we wi ll reply to you at the earliest time. 1. Can not log in to the Web-based Utility of the router after you enter the IP address in the address field? Step 1: Check if the router is working correctly, after the devi ce i s powered on for a few se conds, the SYS indicator on the front panel should light up. If it is not, please contact us. Step 2: Check the net work cabl es are connec ted correctly and the corresponding LED indicator lights up. Sometimes, the indicator lights up, but it does not mean it is functioning. Step 3: Run “Ping” command and check i f it can ping
11N Wireless Broadband Router User Guide 87the R outer’s LA N IP addres s 192. 168.0.1 (op en “Command Prompt ” and type “Pi ng 19 2.168.0.1” a nd then enter). If it is OK, please make sure your browser does not access the Internet by proxy server. If the ping fails, you can press the “RESET” button for 7 seconds to restore to defaul t setti ngs. And then repeat th e pi ng operation. If it still does not work, please contact us. 2. Forgot the login password and cannot enter the Web-based Utility. What can I do? Press the “RESET” button for 7 seconds to restore t he Router to default settings. 3. The computer connected with the Router shows IP address conflict. What can I do? Check if there are other DHCP servers in the LAN and if there are then disable them. The default IP address of the router is 192. 168.0.1 pl ease maker sure the address is not being used by any other device. If there are two computers wi th the same IP address, pl ease change one of them. 4. I cannot use E-mail and access the Intern et. What can I do? Sometimes happens wi th ADSL connecti on a nd Dynamic IP users. You may need to modify the default MTU value (1492). Please open the “WAN Setting” and modify the MTU value with the recommended v alue as
11N Wireless Broadband Router User Guide 881450 or 1400. 5.How to share my c omputer’s resource w ith other users in Internet？ If you want Internet users to access the internal server via the router such as: e-mail server, Web, FTP. You can configure the “Virtual Server”. Step 1: create your internal server, make sure the LAN users can access these servers and know related service port. For example, Web server’s port i s 80; F TP is 21; SMTP is 25 and POP3 is 110. Step 2: In the router’s web click “Virtual Server” and select “Port Range Forwarding”. Step 3: Input the servi ce port provi ded by the rout er (i.e. the external port) for mappi ng the i nternal and external network, for example, 80-80. Step 4: input the internal Web service port, for example, 80-80. Step 5: Input the i nternal server ’s IP address. For example, if your W eb server ’s IP addres s i s 192.168.0.10, please input it. Step 6: select the communication protocol used by your i n t e r n a l h o s t : T C P, U D P, B o t h . Step 7: click “Ok” to activate the settings. The following table lists some well-known applications and their respective service ports: Server Protocol Service Port
11N Wireless Broadband Router User Guide 89WEB Server TCP 80 FTP Server TCP 21 Telnet T CP 23 NetMeeting T CP 1503、1720 MSN Messenger TCP/UDP File Send:6891-6900(TCP) Voice:1863、6901(TCP) Voice:1863、5190(UDP) PPTP VPN TCP 1723 Iphone5.0 T CP 22555 SMTP T CP 25 POP3 T CP 110
11N Wireless Broadband Router User Guide 90 Appendix 4 Clear Wireless Configuration Clear Wirel ess configuration file under windo ws XP 1. Right click “My Network Places” on your computer desktop and select “Properties”. 2. Ri ght cli ck “W ireless Network Co nnections” a nd select “Properties”.
11N Wireless Broadband Router User Guide 91 3. Click “Wireless Network Configuration” and clear the corresponding wi reless configuration fil e as sh own below. Clear Wireless configuration file under windows 7 1. Right click “Network” and click “Properties”.
11N Wireless Broadband Router User Guide 92 2. Click “Manage wireless networks” on the l eft side of the window. 3. De lete t he c orresponding c onfigured file in t he “Manage wireless networks”.
11N Wireless Broadband Router User Guide 93
11N Wireless Broadband Router User Guide 94 Appendix 5 Regulatory Information EU Declaration or Declaration of Conformity Hereby, SH ENZHEN T ENDA T ECHNOLOGY C O.,LTD, declares t hat t his W ireless Br oadband R outer is in compliance with the essential requirements a nd other relevant provisions of Directive 1999/5/EC. FCC Statement This equi pment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to part 15 of th e FCC rul es. These limits are designed to provide reasonabl e protecti on agai nst harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used i n acco rdance wi th the instructions, ma y c ause ha rmful interference t o r adio communications. However, there i s no guar antee t hat interference will not occur in a particular installation. If this equipment does cause harmful interference to r adio or tel evision recepti on, wh ich can be determined by turni ng the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase th e se paration betwe en th e equi pment and receiver.
11N Wireless Broadband Router User Guide 95-Connect the equi pment into an outlet on a ci rcuit different from that to which the receiver is connected. -Consult the deal er or an experi enced radio/TV technician for help. To assure c ontinued compl iance, a ny changes or modifications not expres sly approved by the party responsible for compli ance coul d void the us er’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). “The antenna(s) used for this transmitter must not be co-located or oper ating i n conjuncti on with an y oth er antenna or transmitter.” FCC Radiation Exposure Statement This devi ce complies wi th P art 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this devi ce must accept an y i nterference rec eived, including interference t hat may c ause undesi red operation

Navigation menu