TENDA TECHNOLOGY FH1201 High Power Wireless AC1200 Dual-band Router User Manual part 4 of 4

SHENZHEN TENDA TECHNOLOGY CO., LTD. High Power Wireless AC1200 Dual-band Router part 4 of 4

User Manual_part 4 of 4

High Power Wireless AC1200 Dual Band Router 116 ④ Click Change adapter settings. ⑤ Click Local Area Connection and select Properties.
High Power Wireless AC1200 Dual Band Router 117 ⑥ Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
High Power Wireless AC1200 Dual Band Router 118 ⑦ Select Obtain an IP address automatically and click OK.
High Power Wireless AC1200 Dual Band Router 119 ⑧ Click OK on the Local Area Connection Properties window to save your settings.
High Power Wireless AC1200 Dual Band Router 120 Windows XP ① Right-click My Network Places and select Properties. ② Right click Local Area Connection and select Properties.
High Power Wireless AC1200 Dual Band Router 121 ③ Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
High Power Wireless AC1200 Dual Band Router 122 ④ Select Obtain an IP address automatically and click OK.
High Power Wireless AC1200 Dual Band Router 123 ⑤ Click OK on the Local Area Connection Properties window to save your settings.
High Power Wireless AC1200 Dual Band Router 124 Appendix 2 Join Your Wireless Network Tip ------------------------------------------------------------- To join your wireless network, the PC you use must have an installed wireless network adapter. If not, install one. -------------------------------------------------------------------- Join Your Wireless Network - Windows 7 ① Click Start -> Control Panel.
High Power Wireless AC1200 Dual Band Router 125 ② Click Network and Internet. ③ Click Network and Sharing Center.
High Power Wireless AC1200 Dual Band Router 126 ④ Click Change adapter settings. ⑤ Right click the Wireless Network Connection and select Connect/Disconnect.
High Power Wireless AC1200 Dual Band Router 127 ⑥ Select the wireless network you wish to connect and click Connect. Depending on whether you are joining a secured or unsecured wireless network, you will see different screens: A. If you are joining an unsecured wireless network as seen below: B. If you are joining a secured wireless network as seen below:
High Power Wireless AC1200 Dual Band Router 128 You are required to enter a security on the following screen. Enter the security key and click OK. ⑦ When you see Connected displayed next to the wireless network you selected, you have connected to the wireless network successfully.
High Power Wireless AC1200 Dual Band Router 129 Appendix 3 Factory Default Settings Item Default Settings Router Login Login IP Address 192.168.0.1 Network Settings Internet Connection Type DHCP MAC Address Find it on the label attached to the bottom of your device. MTU PPPoE: 1450 Dynamic IP: 1450 Static IP: 1450 WAN Speed Auto-negotiation DNS Disabled LAN Settings IP Address 192.168.0.1 Subnet Mask 255.255.255.0 DHCP Server Enabled IP Pool 192.168.0.100~192.168.0.200 Time Zone (GMT+08:00)Beijing, Chongquing, Hong Kong, Urumq Set Time and Date manually Disabled Wireless Settings Wireless Enabled Primary SSID (Network Name) Tenda_XXXXXX (XXXXXX is the last six characters in the device's MAC address) Wireless Extender Disabled Network Mode 11b/g/n mixed SSID Broadcast Enabled AP Isolation Disabled Channel Auto Channel Bandwidth 20/40 Extension Channel Auto WMM Capable Enabled APSD Capable Disabled Security Mode None WPS Disabled Tools Remote Web Management Disabled Login Password None Others Bandwidth Control Disabled Traffic Statistics Disabled DMZ Host Disabled
High Power Wireless AC1200 Dual Band Router 130 UPnP Enabled Security Disabled
High Power Wireless AC1200 Dual Band Router 131 Appendix 4 FAQs This section provides solutions to problems that may occur during installation and operation of the device. Read the following if you are running into problems. If yo ur pro blem is no t covered he re , pl ease feel free to go to w ww.ten da cn.co m to find a sol u tion or e m ail your proble ms to : suppo rt@ten d a.co m .cn or s upport 02@tenda .com. c n. We w ill be m o re tha n happ y to h elp yo u out as so o n as possi ble. 1. Q: I cannot access the device's management interface. What should I do?  Make sure the power LED on the device's front panel is on and the SYS LED blinks normally.  Make sure all cables are correctly connected and the corresponding LAN LED on the device is on.  Verify that your PC's TCP/IP settings are configured correctly. If you select the "Use the following IP address" option, set your PC's IP address to any IP address between 192.168.0.2~192.168.0.254. Or you can select the "Obtain an IP address automatically" option.  Check the IP address you entered in your browser. It should be http://192.168.0.1.  Open your browser and click Tools -> Internet Options -> Connections -> LAN settings, uncheck the Use a proxy server for your LAN option.  Press the WPS/RST button for over 7 seconds to restore your device to factory default settings. Then log to your device again. 2. Q: I changed the login password and unfortunately forget it. What should I do? Press the WPS/RST button for over 7 seconds to restore your device to factory default settings. 3. Q: My computer shows an IP address conflict error after having connected to the device. What should I do?  Make sure there are no other DHCP servers on your LAN or other DHCP servers are disabled.
High Power Wireless AC1200 Dual Band Router 132  Make sure the device's LAN IP is not used by other devices on your LAN. The device's default LAN IP address is 192.168.0.1.  Make sure the statically assigned IP addresses to the PCs on LAN are not used by others PCs. 4. Q: I have problems connecting to Internet/Secure websites do not open or displays only part of a web page. What should I do? This problem mainly happens to users who use the PPPoE or Dynamic IP Internet connection type. You need to change the MTU size. Try changing the MTU to 1450 or 1400. If this does not help, gradually reduce the MTU from the maximum value until the problem disappears.
High Power Wireless AC1200 Dual Band Router 133 Appendix 5 Remove Wireless Network from Your PC If you change wireless settings on your wireless device, you must remove them accordingly from your PC; otherwise, you may not be able to wirelessly connect to this device. Below describes how to do remove a wireless network from your PC. Windows 7 ① Right-click the Network icon and select Properties. ② Select Manage Wireless Networks.
High Power Wireless AC1200 Dual Band Router 134 ③ Select the wireless network and click Remove network. Windows XP ① Right-click My Network Places and select Properties.
High Power Wireless AC1200 Dual Band Router 135 ② Right click Wireless Network Connection and then select Properties.
High Power Wireless AC1200 Dual Band Router 136 ③ Click Wireless Networks, select the wireless network name under Preferred networks and then click the Remove button.
High Power Wireless AC1200 Dual Band Router 137 Appendix 6 Safety and Emission Statement CE Mark Warning This is a Class B product in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures NOTE:(1)The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.(2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna.
High Power Wireless AC1200 Dual Band Router 138 - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable

Navigation menu