TENDA TECHNOLOGY 4G600 3G/4G Wireless N150 Router User Manual 2

SHENZHEN TENDA TECHNOLOGY CO., LTD. 3G/4G Wireless N150 Router 2

Contents

User Manual-2

                                                                            41 III Features & Configurations | Tenda  Knowledge Center 802.11 Mode: Select a correct network mode according to your wireless clients.  11b  mode:  This  network  mode  delivers  wireless  speed  up  to  11Mbps and is only compatible with 11b wireless clients.  11g  mode:  This  network  mode  delivers  wireless  speed  up  to  54Mbps and is only compatible with 11g wireless clients.  11b/g  mixed  mode:  This  network  mode  delivers  wireless  speed  up  to 54Mbps and is compatible with 11b/g wireless clients.  11b/g/n mixed mode: This network mode delivers wireless speed up to 300Mbps and is compatible with 11b/g/n wireless clients. BSSID: This is the MAC address of the device's wireless interface.   SSID  Broadcast:  This  option  allows  you  to  have  your  wireless  network  name (SSID) publicly broadcast or if you choose to disable it, the SSID will be hidden.  Channel  Bandwidth:  Select  a  proper  channel  bandwidth  to  enhance  wireless performance.  This  option  is  available  only  in  802.11b/g/n   mixed  mode. Maximum wireless speed in the channel bandwidth of 20/40 is 2 times in 20.  Extension  Channel:  This is  used  to  ensure  N  speeds for  802.11n  devices  on the  network.  This  option  is  available  only  in  11b/g/n  mixed  mode  with  the channel bandwidth of 20/40.  3.2 Security Click  Wireless  ->  Security  to  enter  the  configuration  screen.  Here  you  can define  a  security  key  to  secure  your  wireless  network  against  unauthorized accesses.
                                                                            42 III Features & Configurations | Tenda   Configuration Procedures: ① Configure Security Mode, Cipher Type and Security Key. ② Click Save to save your settings.  Knowledge Center WEP: WEP  is  intended  to  provide  data  confidentiality  comparable  to  that  of  a traditional wired network. Open: If selected, wireless speed can reach up to 54Mbps. Shared: If selected, wireless speed can reach up to 54Mbps. Default Key: Select a key  to be effective  for the current WEP  encryption.  For example,  if you select  Key 2,  wireless  clients must join your wireless network using this Key 2. WPA-PSK: WPA personal supports AES and TKIP cipher types. WPA2-PSK: WPA2 personal supports AES, TKIP and TKIP+AES cipher types. Mixed  WPA/WPA2-PSK:  If  selected,  both  WPA-PSK  and  WPA2-PSK  secured wireless clients can join your wireless network. AES: If selected, wireless speed can reach up to 300Mbps.
                                                                            43 III Features & Configurations | Tenda  TKIP: If selected, wireless speed can reach up to 54Mbps.   TKIP&AES:  If  selected,  both  AES  and  TKIP  secured  wireless  clients  can  join your wireless network. Key Renewal Interval: Enter a valid time period for the key to be changed.   WPS Wi-Fi Protected Setup makes it easy for home users who know little of wireless security  to  establish  a  home  network,  as  well  as  to  add  new  devices  to  an existing network without entering long passphrases or configuring complicated settings.  Simply  enter  a  PIN  code  or  press  the  hardware  WPS  button  and  a secure wireless connection is established.   Knowledge Center WPS: Select Enable/Disable to enable/disable the WPS encryption. WPS Type: Select PBC (Push-Button Configuration) or PIN. Reset OOB: If clicked, the WPS LED will turn off and the security function will be disabled automatically. The WPS server on the router enters idle mode and will not respond to any client’s W PS connection request.
                                                                            44 III Features & Configurations | Tenda  Device PIN: Displays the device’s PIN code. Start PIN: If  you  enter  the  client’s  PIN  code  on  the router, clicking this button starts the PIN connection.   Operation Instructions: PBC:  If  you  press  the  hardware  WPS  button  on  the  device  for  1  second,  the WPS  LED  will  blink  for  about  2  minutes,  indicating  that  the  PBC  encryption method is successfully enabled. During this time, an authentication routine can be  performed  between  your  device  and  a  WPS/PBC  capable  wireless  client. Simply  enable  the  WPS/PBC  on  the  client  wireless  device.  If  it  passes  the authentication, the wireless client device connects to your device and the WPS LED turns off. Repeat the steps above if you want to add more wireless client devices to your device. PIN:  To  use  this  option,  you  must know  the  PIN  code from  the  wireless  client and enter it in the corresponding field on your device while using the same PIN code on the client side for this connection.  Note   ① To  use  the  WPS  encryption,  the  wireless  client  device  must  also  be WPS-capable. ② The  WPS  becomes  unavailable  if  you  select  any  of  the  following  option: Open,  Shared,  WPA2-PSK  plus  TKIP,  and  Mixed  WPA/WPA2-PSK  plus TKIP.    3.3 Access Control Specify  a  list  of  devices  to  "Allow"  or  "Deny"  a  connection  to  your  wireless network via the devices’ MAC Addresses.   Click  Wireless  ->  Access  Control  to  enter  the  configuration  screen.  Three options are available: Disable, Deny and Allow.  A. If you want to allow all wireless clients to join your wireless network, select Disable.
                                                                            45 III Features & Configurations | Tenda  B. If you want to allow ONLY the specified wireless clients to join your wireless network, select Allow.   C. If  you  want  to  disallow  ONLY  the  specified  wireless  clients  to  join  your wireless network, select Deny.   Wireless Access Control Application Example: To only allow your own notebook at the MAC address of C8:3A:35:CC:34:25 to join your wireless network: ① Select Allow. ② Enter C8:3A:35:CC:34:25. ③ Click Add to add the MAC address to the MAC address list. ④ Click Save to save your settings.   Tip If you don't want to configure the complex wireless security settings and want to disallow  others  to  join  your  wireless  network,  you  can  configure  a  wireless access control rule to allow only your own wireless device.   3.4 Connection Status Click  Wireless  ->  Connection  Status.  Here  you  can  see  a  list  of  wireless
                                                                            46 III Features & Configurations | Tenda  devices (if any) connected to the device.   Tip ① The  Bandwidth  here  refers  to  the  channel  bandwidth  instead  of  wireless connection rate. ② You  can  know  whether  there  are  unauthorized  accesses  to  your  wireless network by viewing this connection status list.
                                                                            47 III Features & Configurations | Tenda  4 Advanced Applications This section includes the following:  To remotely access the device via a domain name or access a server on a LAN PC, see 4.1 DDNS Settings.  To let an Internet user access your LAN PC without any  restriction, see 4.2 DMZ Host.  To automatically map the ports between WAN and LAN, see 4.3 UPNP.  To  enable  the  remote  Web  management  feature,  see  4.4  Remote  Web Management.  To  regulate  bandwidth,  see  4.5  Bandwidth  Control  (Available  only  in 4G600).  To restrict  your  LAN  PCs to  access  certain  services  on  the  Internet  via their IP addresses, see 4.6 Client Filter (Available only in 4G600).  4.1 DDNS Settings Dynamic DNS or DDNS is a term used for the updating in real time of Internet Domain  Name  System  (DNS)  name  servers.  We  use  a  numeric  IP  address allocated  by  Internet  Service  Provider  (ISP)  to  connect  to  the  Internet;  the address may either be stable ("static"), or may change from one session on the Internet to the next ("dynamic"). However, a numeric address is inconvenient to remember;  an  address  which  changes  unpredictably  makes  connection impossible.  The  DDNS  provider  allocates  a  static  host  name  to  the  user; whenever  the  user  is  allocated  a  new  IP  address  this  is  communicated  to  the DDNS  provider  by  software  running  on  a  computer  or  network  device  at  that address;  the  provider  distributes  the  association  between  the  host  name  and the address to the Internet's DNS servers so that they may resolve DNS queries. Thus, uninterrupted access to devices and services whose numeric IP address may change is maintained.   Click Advanced -> DDNS Settings to enter the screen below.
                                                                            48 III Features & Configurations | Tenda    Tip To use the DDNS feature, you need to have an account with one of the  DDNS Service Providers in the drop-down list first. DDNS Application Example: If  your  ISP  gives  you  a  dynamic  (changing)  public  IP  address,  you  want  to access  your  router  remotely  (see  4.4  Remote  Web  Management)  but  you cannot predict what your router's WAN IP address will be, and the address can change frequently. In this case, you can use a commercial Dynamic DNS service. It lets you register your domain to their IP address and forwards traffic directed at your domain to your frequently changing IP address. If your DDNS service provider provides you with a DDNS account (User Name: tenda, Password: 123456, Domain Name: tenda.dyndns.org) and you want to use the PC at the IP address of 218.88.93.33 to remotely access this device on the port number of 8090. Then follow the steps below: ① DDNS Settings: Check the Enable DDNS box. ② DDNS  Service  Provider:  Select  your  DDNS  service  provider  from  the drop-down list. Here in this example, select dyndns.org. ③ User  Name:  Enter  the  DDNS  user  name  you  have  registered  with  your
                                                                            49 III Features & Configurations | Tenda  DDNS service provider. Here in this example, enter tenda. ④ Password: Enter the DDNS Password you have registered with your DDNS service provider. Here in this example, enter 123456. ⑤ Domain Name: Enter the DDNS domain name you have registered with your DDNS service provider. Here in this example, enter tenda.dyndns.org. ⑥ Click Save to save your settings.  ⑦ Click  Remote  Web  Management, enable  the  Remote  Web  Management feature, enter 8090 in the Port field, 218.88.93.33 in the IP Address field and then click Save to save your settings.  Now,  you  can  access  your  device  from  the  Internet  by  typing  your  device’s domain  name  into  your  browser ’s  address  or  location  field  on  yo ur  PC
                                                                            50 III Features & Configurations | Tenda  (218.88.93.33) followed by a colon (:) and the remote management port number. Here in this example, enter http://tenda.dyndns.org:8090. 4.2 DMZ Host The  DMZ  (De-Militarized  Zone) function  disables the  firewall on  the  router  for one  device  for  a  special  purpose  service  such  as  Internet  gaming  or  video conferencing  applications  that  are  not  compatible  with  NAT  (Network  Address Translation).   Click Advanced -> DMZ Host to enter the screen below.  Note   ① DMZ  host  poses  a  security  risk.  A  computer  configured  as  the  DMZ  host loses  much  of  the  protection  of  the  firewall  and  becomes  vulnerable  to attacks from external networks. ② Hackers may use the DMZ host computer to attack other computers on your network.   Configuration Procedures: ① DMZ Host  IP:  The IP address  of  the  device  for  which  the  router ’s  firewall
                                                                            51 III Features & Configurations | Tenda  will  be  disabled.  Be  sure  to  statically  set  the  IP  address  of  the  device  that serves as a DMZ host for this function to be consistent. ② Enable: Check to enable the DMZ host functionality. ③ Click Save to save your settings.  Tip Security  softwares  such  as  anti-virus  softwares  and  OS  built-in  firewall,  etc. may affect the DMZ host feature. Disable them if the DMZ host fails.  4.3 UPNP The  Universal  Plug  and  Play  (UPnP)  feature  allows  network  devices,  such  as computers  from  the  Internet,  to  access  resources  on  local  host  or  devices  as needed.  UPnP-enabled  devices  can  be  discovered  automatically  by  the  UPnP service  application  on  the  LAN.  If  you  use  applications  such  as  multiplayer gaming,  peer-to-peer  connections,  real-time  communications  such  as  instant messaging, or remote assistance (a feature in Windows XP), you may need to enable Universal Plug and Play (UPnP) for better experience.  Click Advanced -> UPnP to enter the configuration screen. The UPnP feature is enabled by default.
                                                                            52 III Features & Configurations | Tenda  4.4 Remote Web Management The Remote Web Management allows the device to be configured and managed remotely from the Internet via a Web browser.   Click  Advanced  ->  Remote  Web  Management  to  enter  the  configuration screen.   Tip ① For better security, configure a port number (between 1025 and 65535)  as the  remote  Web  management  interface,  do  not  use  the  number  of  any common service port (1~1024). ② Make sure your WAN IP address (Internet IP address) is a public IP address. Private IP addresses are not routed on the Internet. ③ It is unsafe to make your router remotely accessible to all PCs on external network. For the purpose of security, we suggest that you only enter the IP address of the PC that is to be used to remotely manage your device. Remote Web Management Application Example: To access your device (WAN IP address: 102.33.66.88) at your home from the
                                                                            53 III Features & Configurations | Tenda  PC (218.88.93.33) at your office via the port number  of 8090, follow the steps below: ① Enable: Check to enable the remote Web management feature. ② Port: Enter 8090.   ③ IP  Address:  Specify  the  IP  address  for  remote  management.  Here  in  this example, enter 218.88.93.33. ④ Click Save to save your settings.  Type  "http://102.33.66.88:8090"  into  your  browser’s  address  or  location  field and you can remotely access the router from your home.  Knowledge Center IP Address: Here you can specify the IP address for remote management (If set to  "0.0.0.0", the  device  becomes  remotely  accessible  to  all  the  PCs  on  the Internet or other external networks). Port:  This  is  the  management  port  to  be  open  to  outside  access.  The  default setting is 8080. This can be changed.  4.5 Bandwidth Control (Available only in 4G600) If  there  are  multiple  PCs  behind  your  device  competing  for  limited  bandwidth resource,  then  you  can  use  this  feature  to  specify  a  reasonable  amount  of
                                                                            54 III Features & Configurations | Tenda  bandwidth for  each  such  PC,  so that  no  one  will  be  over  stuffed or  starved to death. Note that this feature is unavailable in 3G/4G Router Mode.  Bandwidth Control Application Example: You  share  a  4M-broadband  service  with  your  neighbor  (at  the  IP  address  of 192.168.0.125). He always downloads a large volume of data from the Internet, which  sharply  frustrates  your  Internet  surfing  experience;  you  can  use  this feature to  set limits for the volume of Internet traffic he can get. For example, you  can  equally  split  the  bandwidth,  so  your  neighbor  can  only  use  up  to  2M Internet traffic and you can smoothly enjoy 2M. Configuration Procedures: ①   Bandwidth Control: Check the Enable box to enable the feature. ②   IP Address: Enter the last number of the IP address. Here in this example, enter 125 in both boxes. ③   Upload Limit: Set a limit to regulate the uplink bandwidth of PC(s) on the LAN. Here in this example, enter 32 in both boxes. ④   Download Limit:  Set a limit to  regulate  the  downlink  bandwidth of PC(s) on the LAN. Here in this example, enter 256 in both boxes. ⑤   Enable: Check to enable the current rule. ⑥   Add to List: Click to add the current rule to the rule list. ⑦   Click Save to save your settings.
                                                                            55 III Features & Configurations | Tenda    Tip ① 1M=128KByte/s. ② The  volume  of  uplink  traffic/downlink  traffic  should  not  be  larger  than  that allowed on your  device's WAN (Internet) port.  Consult  your ISP, if you are not sure of the total volume of Internet traffic that you can have. ③ The bandwidth for ADSL/DSL line usually refers to the download bandwidth.  4.6 Client Filter (Available only in 4G600) This  section  allows  you  to set  the  times  specific  clients can  or cannot  access the  Internet  via  the  devices’  IP  addresses  and  service  port.   Note  that  this feature is unavailable in 3G/4G Router Mode.
                                                                            56 III Features & Configurations | Tenda    Knowledge Center Default: The default policy for the client filter. For the packets that do not match the set rule, the default rule is applied. Filter Mode: Specify a filter mode for the rule.  Deny:  Disallow the packets that match the set rule to pass the router. For other packets that do not match the set rule, the default policy is applied.   Allow: Allow the packets that match the set rule to pass the router. For other packets that do not match the set rule, the default policy is applied. Client Filter Application Example: To  prohibit  PCs  within  the  IP  address  range  of  192.168.0.110--192.168.0.111 from accessing Web pages during the time period of 8:00~18:00 from Monday to Friday, follow the steps below: ① Click Add to add a filter rule.   ② Filter Mode: Select Deny. ③ Description: Briefly describe the current rule. This field is optional.   ④ IP: Enter 192.168.0.110 as the starting IP address and 192.168.0.111 as the ending IP address.
                                                                            57 III Features & Configurations | Tenda  ⑤ WAN Port Range: Enter a service port number. Here in this example, enter 80 in both boxes. HTTP port 80 is the standard protocol for Web servers. ⑥ Type: Select a protocol for the traffic. If you are unsure, select  Both. ⑦ Time: Specify a time period for the current rule to take effect. Here in this example, select 8:00~18:00. Day: Select a day, or several days of the week for the current  rule to take effect. Here in this example, select Mon, Tue, Wed, Thur and Fri. ⑧ Click Save to save your settings.  ⑨ Enable Client Filter: Check to enable the client filter feature. ⑩ Select Allow from the Default drop-down list and then click Save.
                                                                            58 III Features & Configurations | Tenda    Tip ① The valid service port number range is 1 ~ 65535. ② If you have not set up the system time for this device, click  Tools -> Time & Date  to  configure  correct  time  and  date  settings  for  the  rule(s)  to  be effective.
                                                                            59 III Features & Configurations | Tenda  5 Tools  To configure system time, see 5.1 Time & Date.  To upgrade firmware, see 5.2 Firmware Upgrade.  To backup or restore configurations, see 5.3 Backup & Restore.  To restore factory default settings, see 5.4 Restore to Factory Default.  To change login password, see 5.5 Change Password.  To view logs, see 5.6 Logs.  To restart device, see 5.7 Reboot.  5.1 Time & Date Click Tools -> Time & Date to enter the configuration screen.  Tip Configured time  and  date  settings  will  be  lost  if  the  device  gets  disconnected from  power supply.  However,  it  will  be  updated  automatically  when  the  device reconnects to the Internet. To activate time-based features (e.g. Client Filter), the  time  and  date  settings  should  be  set  correctly  first,  either  manually  or automatically. A. To synchronize with Internet time servers: ① Internet Time Server: Check to enable the feature (If enabled, time and date will be updated automatically from the Internet).   ② Sync Interval:  Specify  a  time  interval for  periodic  update  of  time  and  date information from the Internet. ③ Time Zone: Select your current time zone. ④ Click Save to save your settings. ⑤ Go to the Status screen to make sure the system time is correctly updated.
                                                                            60 III Features & Configurations | Tenda    Note In the Universal Repeater Mode, the Internet Time Server - Enable feature is not available, so you can only set the time and date manually. B. To set time and date manually/synchronize with your PC:   ① Internet Time Server: Uncheck to disable the feature.   ② Specify  the  time  and  date  manually  or  click  Copy  Local  Time  to automatically copy your PC's time to the device. ③ Click Save to save your settings.
                                                                            61 III Features & Configurations | Tenda   ④ Go to the Status screen to make sure the system time is correctly updated.  5.2 Firmware Upgrade Click Tools -> Firmware Upgrade to enter the configuration screen. Firmware upgrade is released periodically to improve the functionality of your device and also to add new features. If you run into a problem with a specific feature of th e device, log on to our Website (http://www.tendacn.com) to download the latest firmware to update your device.  Note ① Before  you  upgrade  the  firmware,  make  sure  you  are  having  a  correct firmware. A wrong firmware may damage the device. ② It  is  advisable  that  you  upgrade  the  device's  firmware  over  a  wired connection.  DO  NOT  disconnect  the  power  connection  to  the  device  when the  upgrade  is  in  process  otherwise  the  router  may  be  permanently damaged. Configuration Procedures:
                                                                            62 III Features & Configurations | Tenda  ①   Click Browse.    ② Select the firmware file you want to use and click Open. ③ Click Upgrade. ④   Click OK on the appearing screen and wait for it to complete. When upgrade is completed, check the Current System Version field. It should display the firmware you load. 5.3 Backup & Restore Once you have configured the device the way you want it, you can save these settings to a configuration file on your local hard drive that can later be imported to  your  device  in  case  that  the  device  is  restored  to  factory  default  settings. Click Tools -> Backup & Restore to enter the configuration screen.  Tip It is  advisable  to  include the file name suffix  of ".cfg" to  avoid  problems  when renaming the file name. To backup configurations: ① Click Backup.
                                                                            63 III Features & Configurations | Tenda   ② Click OK on the appearing window.  ③ Click Save on the File Download window.  ④ Select a local hard drive to save the file and click Save.
                                                                            64 III Features & Configurations | Tenda   To restore configurations: ① Click Browse.  ② Select the configuration file that is saved previously to your local hard drive and click Open.
                                                                            65 III Features & Configurations | Tenda   ③ Click the Restore button to reset your device to previous settings.  5.4 Restore to Factory Default Click  Tools  ->  Restore  to  Factory  Default to  enter  the  configuration  screen. Here you can reset the device to factory default settings.   Note   ① If you enable this option, the device will be restored to factory default values. You  will  have  to  reconfigure  Internet  connection  settings  and  wireless settings. ② Do not restore factory default settings unless the following happens:   You  need  to  join  a  different  network  or  unfortunately  forget  the  login password.  You cannot access the Internet and your ISP or our technical support asks
                                                                            66 III Features & Configurations | Tenda  you to reset the device.  The factory default settings are listed below:  IP Address: 192.168.0.1  Subnet Mask: Enter 255.255.255.0.  Password: admin  5.5 Change Password Click  Tools  ->  Change  Password  to  enter  the  configuration  screen.  It  is strongly  recommended  that  you  change  the  factory  default  login  password. Otherwise,  anyone  in  your  network  can  access  this  utility  to  change  your settings.  Tip ① The default login password is "admin". ② A valid password must only include letters, numbers or underscore.
                                                                            67 III Features & Configurations | Tenda   Configuration Procedures: ① Old Password: Enter the current login password. ② New Password: Input a new password. ③ Confirm New Password: Re-enter the new password for confirmation. ④ Click Save to save your settings.  5.6 Logs Click  Tools  -> Logs  to  enter the  configuration  screen.  Here  you  can  view  the history of the device’s actions upon system startup.
                                                                            68 III Features & Configurations | Tenda  5.7 Reboot When a certain feature does not take effect or the device  is malfunctioning, try rebooting the device.
                                                                            69 IV Appendix | Tenda  IV Appendix 1 Configure Your PC Windows 7 Step 1: Click the icon    on the right bottom corner of your desktop. Step 2: Click Open Network and Sharing Center.   Tip If  you  cannot find the  icon    on the  right  bottom  corner of  your  desktop, follow steps below: Click Start -> Control Panel -> Network and Internet -> Network and Sharing Center.
                                                                            70 IV Appendix | Tenda  Step 3: Click Local Area Connection -> Properties.  Step 4: Find and double click Internet Protocol Version 4(TCP/IPv4).
                                                                            71 IV Appendix | Tenda   Step  5:  Select  Obtain  an  IP  address  automatically  and  Obtain  DNS  server address automatically and click OK.  Step 6: Click OK on the Local Area Connection Properties window (see Step 4 for the screenshot).  Windows XP  Step 1: Right click My Network Places on your desktop and select Properties.
                                                                            72 IV Appendix | Tenda  Step 2: Right click Local Area Connection and select Properties.  Step 3: Scroll down to find and double click Internet Protocol (TCP/IP).
                                                                            73 IV Appendix | Tenda  Step  4:  Select  Obtain  an  IP  address  automatically  and  Obtain  DNS  server address automatically and click OK.  Step 5: Click OK on the Local Area Connection Properties window (see Step 3 for the screenshot).
                                                                            74 IV Appendix | Tenda  2 Join Your Wireless Network  Tip ① To join your wireless network, the PC you use must have an installed wireless network adapter. If not, install one. ② The device’s SSID is "Tenda_XXXXXX" by default (where "XXXXXX" is the last six characters of its MAC address). You can find the MAC address and/or SSID on the label attached to the device’s bottom).  Windows 7 Step 1: Click    or    from the right bottom of your desktop. Step 2: Double click the name of the wireless network (SSID) you wish to join and then follow onscreen instructions.  When Connected appears next to the selected wireless network (SSID), you have successfully connected to it.
                                                                            75 IV Appendix | Tenda    Windows XP Step 1: Right click My Network Places and select Properties.  Step  2:  Right  click  Wireless  Network  Connection  and  select  View  Available Wireless Networks.
                                                                            76 IV Appendix | Tenda   Step 3: Double click the name of the wireless network (SSID) you wish to join and then follow onscreen instructions.  When Connected appears next to the selected wireless network (SSID), you have successfully connected to it.
                                                                            77 IV Appendix | Tenda
                                                                            78 IV Appendix | Tenda  3 FAQs This  section  provides solutions to problems that  may  occur  during  installation  and operation of the device. Read the following if you are running into problems.   If your problem is not covered here, please feel free to go to www.tendacn.com to find a  solution  or  email  your  problems  to:  support@tenda.com.cn  or support02@tenda.com.cn. We will be more than happy to help you out as soon as possible. 1. Q: I cannot access the device's management interface. What should I do?  Make sure the PWR (power) LED on the device is on and the SYS LED blinks normally.  Make sure all cables are correctly connected and the corresponding LAN LED on the device is on.  Verify that your PC's TCP/IP settings are configured correctly. If you select the "Use the following IP address" option, set your PC's IP address to any IP address between  192.168.0.2~192.168.0.254.  Or  you  can  select  the  "Obtain  an  IP address automatically" option.  Delete your browser cache and cookies or use a new browser. Make sure you enter 192.168.0.1 in your browser’s address bar.  Open your browser and click Tools -> Internet Options -> Connections -> LAN Settings, uncheck the Use a proxy server for your LAN option.  Press the WPS/Reset button for over 6 seconds to restore your device to factory default settings. Then log in to your device again. 2. Q: I changed the login password and unfortunately forget it. What should I do? Press  the  WPS/Reset  button for  over  6  seconds  to  restore  your  device  to  factory default settings. 3. Q: My computer shows an IP address conflict error when it connects to the
                                                                            79 IV Appendix | Tenda  device. What should I do?  Make sure there are no other DHCP servers on your LAN or other DHCP servers are disabled.  Make sure the device's LAN IP is not used by other devices on your LAN. The device's default LAN IP address is 192.168.0.1.  Make sure the statically assigned IP addresses to the PC(s) on LAN are not used by others device(s). 4. Q: I cannot access email and the Internet/Some Websites do not open. What should I do? This problem mainly  happens to  users  who use the PPPoE or  Dynamic IP Internet connection type. You need to change the MTU size. Try changing the MTU to 1450 or 1400. If this does not help, gradually reduce the MTU from the maximum value until the problem disappears. For details, see WAN MTU Setup.
                                                                            80 IV Appendix | Tenda  4 Remove Wireless Network from Your PC When you change your wireless network (For example, change your device's SSID or security key), the old wireless settings on your PC will not be updated accordingly, you must  manually  remove  them  from  your  PC;  otherwise,  you  may  not  be  able  to wirelessly  connect  to  the  device.  This  section  explains  how  to  remove  a  wireless network from your PC.  Windows 7 ①   Right-click the Network icon and select Properties.  ②   Select Manage Wireless Networks.  ③   Select the wireless network and click Remove network.
                                                                            81 IV Appendix | Tenda    Windows XP ①   Right-click My Network Places and select Properties.  ②   Right click Wireless Network Connection and then select Properties.
                                                                            82 IV Appendix | Tenda   ③   Click  Wireless  Networks,  select  the  wireless  network  name  under  Preferred networks and then click the Remove button.
                                                                            83 IV Appendix | Tenda  5 Safety and Emission Statement   CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This device complies with EU 1999/5/EC. NOTE:  (1)  The  manufacturer  is  not  responsible  for  any  radio  or  TV  interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ-45 cable.    FCC Statement This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the following two conditions: (1) This device may not cause harmful interference, and (2) this  device  must  accept any  interference received, including  interference that  may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed  and  used  in  accordance  with  the  instructions,  may  cause  harmful interference  to  radio  communications.  However,  there  is  no  guarantee  that interference will not occur  in  a  particular  installation.  If this equipment does cause harmful  interference  to  radio  or  television  reception,  which  can  be  determined  by turning  the  equipment  off  and  on,  the  user  is  encouraged  to  try  to  correct  the interference by one of the following measures: -  Reorient or relocate the receiving antenna.
                                                                            84 IV Appendix | Tenda  -  Increase the separation between the equipment and receiver. -  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -  Consult the dealer or an experienced radio/TV technician for help. FCC  Caution:  Any  changes  or  modifications  not  expressly  approved  by  the  party responsible for compliance could void the user's authority to operate this equipment. This  transmitter must  not be co-located  or  operating  in conjunction with any other antenna or transmitter. The  manufacturer  is  not  responsible  for  any  radio  or  TV  interference  caused  by unauthorized modifications to this equipment. Radiation Exposure Statement This  equipment  complies  with  FCC  radiation  exposure  limits  set  forth  for  an uncontrolled  environment.  This  equipment  should  be  installed  and  operated  with minimum distance 20cm between the radiator & your body. NOTE:  (1)  The  manufacturer  is  not  responsible  for  any  radio  or  TV  interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ-45 cable. NCC Notice   經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更設計之特性及功能。 低功率射頻電機之作用不得影響飛航安全及幹擾合法通信;經發現有幹擾現象時,應立即停用,並改善至無幹擾時方得繼續使用。前項合法通信,指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之幹擾。

Navigation menu