TECNO MOBILE WX3FLTE Mobile phone User Manual

TECNO MOBILE LIMITED Mobile phone

User Manual

11.Taking care of your deviceYour device is a product of superior design & craftsmanship and should behandled with care: The following recommendations will help protect yourphone:Keep the device dry. Precipitation, humidity, and all types of liquid ormoisture may contain minerals that can rust electronic circuits. If yourdevice gets wet, remove the battery and refrain from turning on device.Wipe it with a dry cloth and take it to the service center.Do not store the device under extreme temperatures; it can damage thebattery and shorten device lifespan.Do not use or store device in dusty and dirty areas; the electroniccomponents may be damaged.Do not attempt to open device in any way other than instructed in thisguide. Repairs attempted by an entity other than designated serviceagent/center will void warranty.Licking the battery or charger is strictly prohibited; saliva is more corrosivethan water. Residual saliva may short-circuit phone and damage itsmotherboard, causing the device to become inoperable; battery & chargermay also be damaged in the process.
2WARNING:Licking USB plug or metallic battery component is strictly prohibited.Do not drop, knock, or shake device. Rough handling can disrupt internalcircuit boards and fine mechanical parts.Do not use harsh chemicals, cleaning solvents, or strong detergents toclean the device. Use a soft and dry cloth to wipe down surfaces.Do not place battery in fire, explosion may occur. With concern for theenvironment, please abide local laws & ordinances in battery disposal.Only use original battery, charger, and accessories applicable to thespecific mobile model. Failure to do so voids the warranty and may resultin a hazard.Power off mobile prior to testing its charger. If charger malfunctions,off-mode will prevent damage to the motherboard.Please keep the charging mobile away from small children.Do not touch charger or mobile with wet hands; it’s hazardous and maydamage electronic parts.WARNING:Risk of explosion if original battery is replaced.Tampering with mobile OS and ROOT voids warranty and may causesoftware instability.Battery &charger safety
32.Know your phonePosition of Keys1. Earphone plug 2. Front flashlight3. Front camera 4. Receiver5. USB port 6. Microphone7. Volume button 8. Power button9. Rear camera 10. Flashlight11. Fingerprint 12. Speaker
43.Exploded view of all partsDescription1. TP_ASM 2. LCD3. FH_ASM 4. SIDEKEY_FPC5. MIC_RUBBER 6. RECEIVER7. PCBA 8. FRONT_CAMERA9. BACK_CAMERA 10. MOTOR11. FINGERPRINT 12. FINGERPRINT_FRAME13. FINGERPRINT_EC_FOAM 14. JACK_RUBBER15. SPEAKER 16. REAR_HOUSING_ASM17. BACK_CAM_LENS 18. BATTERY19. MAIN_ANTENNA_FPC 20. CDMA_ANTENNA_FPC21. GPS_ANTENNA_FPC 22. MACHINE_SCREW23. SCREW 24. BATTERY_COVER_ASM
54. SIM / SD card installation1. Power off mobile.2. Refer to the following picture for SIM / SD card installation.Removing the cover and SIM cards.1. Unclip the cover.2. To remove the SIM cards, press and slide it out.
6Installing the SIM cards and cover.1. You must insert your SIM cards to make phone calls.2. To install SIM cards, place the SIM cards with chip facing downwards,and then slide it into its slot. Make sure that it is correctly inserted.3. Close the phone cover.
7Installing and removing the SD card.1. Insert the external SD card into the slot with the gold contact facingdown. To remove the external SD card, gently press and slide it out.2. In addition, regularly removing or inserting the SD card may cause thephone to restart.
85.Home screenHome screen showcases frequently used apps, you can also displayubiquitous information such as time , date, etc.
96.DialingTap the phone icon to open call interface. Enter contact number via keypadto start a call. The keypad interface also enables functions such as textingand contact storage.
107.Notification & Function toggleThe notification screen displays new information & events; simply tap thenotification to access its detailed content.The function-toggle screen lists commonly used functions and their virtualswitches. Tap a switch to quickly turn a function on/off.
118.MessagesThe message function sends plain or multimedia texts to your friends. Tapa message to view its content. Tap the “Compose new message” button tostart composing a message and send it to designated contact.
129.CameraThe camera function captures your surroundings via the front or rearcamera.
1310.GalleryThe gallery can be used to browse images and photos from mobile or SDcard storage; editing function can be performed. Images can be designatedas wallpaper or contact avatar. The sharing function allows images to beshared with friends via Bluetooth and MMS, etc.
1411.Wi-FiEnabling Wi-Fi grants access to local hotspots and allows you to browseInternet. Private networks will require a password.
1512.Factory data reset“Factory data reset” resets all configurations to their default state. Internalmobile storage is cleared of all data including apps, photos, music, videos,mail, contacts, etc. This procedure may take a long time. Please waitpatiently for mobile to restart and do not power off.WARNING:Factory data reset as a last resort. Once activated all user data &configurations are deleted and cannot be restored.
1613.FCC CautionLabelling requirements.This device complies with part 15 of the FCC Rules. Operation is subject tothe condition that this device does not cause harmful interference.Information to user.Any Changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate theequipment.Information to the user.Note: This equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates usesand can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.Specific Absorption Rate (SAR) information:This Mobile phone meets the government's requirements for exposure toradio waves. The guidelines are based on standards that were developedby independent scientific organizations through periodic and thoroughevaluation of scientific studies. The standards include a substantial safety
17margin designed to assure the safety of all persons regardless of age orhealth.FCC RF Exposure Information and StatementThe SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.Device types: WX3F LTE (FCC ID: 2ADYY-WX3FLTE) has also been testedagainst this SAR limit. The highest SAR value reported under this standardduring product certification for use at the ear is 0.71W/kg and whenproperly worn on the body is 1.26/kg. This device was tested for typicalbody-worn operations with the back of the handset kept 10mm from thebody. To maintain compliance with FCC RF exposure requirements, useaccessories that maintain a 10mm separation distance between the user'sbody and the back of the handset. The use of belt clips, holsters andsimilar accessories should not contain metallic components in its assembly.The use of accessories that do not satisfy these requirements may notcomply with FCC RF exposure requirements, and should be avoided.Body-worn OperationThis device was tested for typical body-worn operations. To comply withRF exposure requirements, a minimum separation distance of 1.0 cm mustbe maintained between the user’s body and the handset, including theantenna. Third-party belt-clips, holsters, and similar accessories used bythis device should not contain any metallic components. Body-wornaccessories that do not meet these requirements may not comply with RFexposure requirements and should be avoided. Use only the supplied or anapproved antenna.

Navigation menu