TECH AUDIO W101 Wireless Transmitter and Receiver User Manual Layout 1

TECH-AUDIO CO., LTD Wireless Transmitter and Receiver Layout 1

Users Manual

343 Vanderbilt Avenue Norwood, MA 02062 (781) 762-6300 www.atlantictechnology.comLimited Warrantyis warranty protects the owner of the Atlantic TechnologyWireless WA-60-t and WA-60-r (the PRODUCT) for one(1) year from the date of purchase.is warranty covers all defects in material and workmanshipwith the following specic exceptions. ese are:• Damage caused by improper installation or adjustment• Damage caused by accident, unreasonable use or neglect• Damage from failure to follow instructions contained inthis Instruction Manual• Damage occurring during shipment• Damage from the performance of repairs by someone notauthorized by Atlantic Technology• Any unit on which the serial number has been effaced,modied, or removed• Units which have been altered or modied in design,appearance or construction.is warranty covers only the actual defects within the PRO-DUCT itself. IT DOES NOT cover costs of installation in (orremoval from) a xed installation, or normal setup, claimsbased on any misrepresentation by the seller, or performancevariations resulting from installation related circumstancessuch as signal quality, AC power or incompatibilities withspeakers and/or other system components.During the warranty period, Atlantic Technology will, at itsoption, either repair the defect, or replace the defectiveproduct, or the defective parts, or components thereof atno charge to the owner for parts and labor covered by thiswarranty If necessary repairs are not covered by this war-ranty, or if a unit is examined which is not in need of repair,you will be charged for the repairs and/or the examination.If non-warranted repairs are needed, we will notify you ofthe estimated cost and ask for your authorization to per-form said repairs.You must pay shipping charges incurred in getting yourProduct to the factory. We will pay the return shippingcharges if the repairs are covered by the warranty. Please savethe original shipping cartons, as the unit MUST be returnedin the original carton and packing. (Replacement cartons areavailable at a modest charge.)If your product needs service, please call Atlantic Technologyat 781-762-6300.You will need to present the original bill of sale to establishthe date of purchase. In the event that the proof of purchasecannot be established with the original receipt, the warrantyperiod shall be determined by the earliest date of manufac-ture shown on the unit.In the event that you wish to return your Atlantic TechnologyProduct back to us, for any reason, please call to arrange fora Return Authorization Number. is will ensure that yourproblem is discussed with a service technician who will de-termine if there is a quick solution to your problem.Atlantic Technology shall not be liable for, in any way respon-sible for, any incidental or consequential damages of anykind. Some states do not allow limitations on how long animplied warranty lasts and/or do not allow the exclusion ofincidental or consequential damages; therefore, the limita-tions and exclusions stated herein may not apply to you.is warranty gives you specic legal rights; and you mayalso have other rights that vary from state to state.THERE ARE NO WARRANTIES GIVEN BY ATLANTICTECHNOLOGY THAT EXTEND BEYOND THE DESCRIP-TION GIVEN HEREIN. ANY IMPLIED WARRANTIES OFFITNESS FOR PURPOSE SOLD, MERCHANTABILITY,DESCRIPTION, QUALITY OR ANY OTHER MATTERSARE LIMITED TO THE TERMS OF THE EXPRESSEDLIMITED WARRANTY STATED HEREIN.Products are sold on the basis of specications applicableat the time of sales. Atlantic Technology shall have no obli-gation to modify products once they have been sold. iswarranty is applicable only in the United States. For appli-cability in other countries, please call Atlantic Technology.WA-60 Wireless Transmitter and ReceiverSafety PrecautionsCAUTION: To reduce the risk of electric shock, do not remove the cover(or back). No user serviceable parts inside. Refer to qualied personnel.WARNING: To reduce the risk of re or electric shock, do not expose thisappliance to rain or moisture. is device generates a fair amount of heat.Make sure nothing blocks the ventilation to the rear panel of the unit.e lightning ash with arrowhead, within an equilateral tri-angle, is intended to alert the user to the presence of uninsu-lated “dangerous voltage” within the product’s enclosure thatmay be of sufficient magnitude to constitute a risk of electricalshock to persons.e exclamation point within an equilateral triangle is intendedto alert the user to the presence of important operating main-tenance (servicing) instructions in the literature accompanyingthe appliance.e contents of this manual are Copyright © 2016 by AtlanticTechnology International, Corp., and may not be duplicated orreproduced by any means, whether physical, electronic or oth-erwise without prior written consent from Atlantic TechnologyInternational, Corp.Atlantic Technology and the Atlantic Technology logo are registered trade-marks of Atlantic Technology International, Corp.Specications are those in effect at the time of printing. Atlantic TechnologyInternational, Corp. reserves the right to change specications or designs atany time without notice without obligation to modify existing units.FCC Complianceis device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) this device may not cause harmful inter-ference, and (2) this device must accept any interference received, includinginterference that may cause undesired operationChanges or modications not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment.is equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. ese limitsare designed to provide reasonable protection against harmful interferencein a residential installation. is equipment generates and can radiate radiofrequency energy and, if not installed and used in accordance with the in-structions, may cause harmful interference to radio communications. How-ever, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one ormore of the following measures:• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.To satisfy FCC RF exposure requirements, a separation distance of 20 cmor more should be maintained between this device and persons duringdevice operation.To ensure compliance, operations at closer than this distance is not recom-mended. e antenna used for this transmitter must not be co-located inconjunction with any other antenna or transmitter.WA-60 Wireless Audio SystemCongratulations on the purchase of an Atlantic Tech-nology WA-60 Wireless Audio System. Never beforehas it been so easy to distribute audio from one loca-tion in your home or business to another than it isright now.In this document, we will walk you through the instal-lation of the WA-60 system in just a few of the cong-urations that are possible with this high performancewireless audio distribution system.Specications• Wireless 20 hz to 20kHz sound• Robust and dedicated network for your audio• Easy setup, get wireless music in seconds• external Antenna• Range; Line of sight: 130-150´• Range; obstructed: 70´• No interference or delays• Works with both Mac & PC• Plug ’n play - No soware needed• Flexible multi-zone functionality• RF band: 2.4GHz• four channels• SNR: 93dBTroubleshooting GuideOnce your subwoofer is set up, you should have many years of maintenancefree enjoyment from your system. However, if you should encounter a prob-lem, refer to the following guide to help you nd the solution. If a problempersists, you should contact your local authorized Atlantic Technology dealer.Problem Solutionsa. Make sure both transmitter and receiver areconnected to a power supplyb. Switch to supplied USB AC Adaptera. Make sure your WA-60-t and WA-60-r areboth set to the same “Zone”b. WA-60-r may be out of range. Try movingthe receiver closera. Ensure that your source components arefunctioning properlyb. Ensure that the audio levels are congured for audible output (volume at source and/or destination may be muted or turned too low)WA-60-t and/or WA-60-r are connected but Status LED does not light upNo Wireless Connection (WA-60-t and WA-60-r Statuslights are “Red”)Your WA-60-t and WA-60-r are connected, but noaudio occursPackage ContentNOTE: Please contact Customer Service if any of these items are missing.Your WA-60 Wireless Audio System ships withthis Instruction Manual and the following items:is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.• Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damageand will oen require extensivework by a qualied technicianto restore the apparatus to its normal operation.• Damage Requiring ServiceUnplug the apparatus from the wall outlet and refer servicing to qualied service personnel under the following conditions:When the power-supply cordor plug is damaged; If liquid has been spilled, or objects have fallen into the apparatus; If the apparatus has been exposed to rain or water; If the apparatus does not operate normally by followingSafety Instructions• Read these instructions.• Keep these instructions.• Heed all warnings.• Follow all instructions.• Do not use this apparatus near water.• Clean only with dry cloth.• Do not block any ventilationopenings. Install in accordance with the manufacturer’s instructions.• Do not install near any heatsources such as radiators, heat registers, stoves, or other apparatus that produce heat.• Protect the power cord frombeing walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.• Only use attachments/accessories specied by themanufacturer.• Unplug this apparatus duringlighting storms or when un-used for long periods of time.• Refer all servicing to qualiedservices personnel. Servicingthe operating instructions;If the apparatus has been dropped or damaged in anyway, and; When the apparatusexhibits a distinct change in performance this indicatesa need for service.• Object and Liquid EntryNever push objects of any kindinto the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a re or electric shock. e apparatus shall notbe exposed to dripping or splashing and no objects lledwith liquids, such as vases shall be placed on the appara-tus. Don’t put candles or other burning objects on top of this unit.• is device has no power switch. To disconnect this device from power supply, the power cord must be disconnected.• e power supply and power cord for this apparatus is intended for indoor use only.• Only use the included A/C adaptor
1. Connect the WA-60-t transmitter using the supplied power supply and micro-USB cable. e front LED should turn a steady red and the blue LED will blink on and off.2. Choose the appropriate cable to connect the WA-60-t to your chosen source. Most computers and phones will use the 1/8˝ (3.5mm) connector. Receivers and other sources may use the standard RCA cable. 3. Select the channel you want to use. Consult the front panel of the WA-60-t for more information on selecting the channel.Status LEDere are two LED on each WA-60 transmitterand receiver. A red power indicator and a bluestatus indicator. e Red LED will remain lit aslong as the unit is on. e blue LED will eitherash or remain constant. If the blue LED isashing the receiver or transmitter is lookingfor a signal. If the blue LED is constant the unithas successfully paired with the receiver ortransmitter.Connections and CongurationsZone Switche WA-60 features four different selectable channels. Be sure to setboth the transmitter and receiver to the same channel.Antenna connection Analog input/output connectionMicro USB power portPart 1: Connecting the WA-60-t Transmitter Part 2: Connecting the WA-60-r Receiver1. Connect the WA-60-r Receiver using the supplied power supply and micro-USB cable. e front LED should turn a steady red and the blue LED will blink on and off.2. Choose the appropriate cable to connect the WA-60-r to your chosen component. If you are connecting a subwoofer be sure to use the same input and output. If you connect the receiver LFE out to the R input on the transmitter, connect the subwoofer to the R output on the receiver3. Select the same channel you set the WA-60-t transmitter. Consult the front panel of the WA-60-t for more information on selecting the channel.4. e blue LED should switch to a steady blue when the receiver and transmitter are connected.OR

Navigation menu