TEAC CR-H101 CD Receiver User Manual

TEAC Corporation CD Receiver

User Manual

ZCR-H101CD ReceiverOWNER’S MANUALMODE D’EMPLOIMANUAL DEL USUARIOENGLISHFRANÇAIS ESPAÑOL
2CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.<The lightning flash with arrowhead symbol, within an equilateral trian-gle, is intended to alert the user to the presence of uninsulated “dan-gerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of elec-tric shock to persons.BThe exclamation point within an equi-lateral triangle is intended to alert the user to the presence of import-ant operating and maintenance (servicing) instructions in the litera-ture accompanying the appliance.WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.CLASS " apparatus with double insulation, and no protective earth provided.CAUTION oDO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE INSIDE. oIF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT THE STORE WHERE YOU PURCHASED THE UNIT FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED. oUSE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.IN USA/CANADA, USE ONLY ON 120 V SUPPLY.The nameplate is located on the bottom of the unit as shown below.NameplateFront sideIMPORTANT SAFETY INSTRUCTIONS
31) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.8) Do not install near any heat sources such as radi-ators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polar-ized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an elec-trician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11) Only use attachments/accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13) Unplug this apparatus during lightning storms or when unused for long periods of time.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. oThe apparatus draws nominal non-operating power from the AC outlet with its POWER or STANDBY/ON switch not in the ON position. oThe mains plug is used as the disconnect device, the disconnect device shall remain readily operable. oCaution should be taken when using earphones or headphones with the product because exces-sive sound pressure (volume) from earphones or headphones can cause hearing loss.CAUTION oDo not expose this apparatus to drips or splashes. oDo not place any objects filled with liquids, such as vases, on the apparatus. oDo not install this apparatus in a confined space such as a book case or similar unit. oThe apparatus should be located close enough to the AC outlet so that you can easily reach the power cord plug at any time. oIf the product uses batteries (including a bat-tery pack or installed batteries), they should not be exposed to sunshine, fire or excessive heat. oCAUTION for products that use replaceable lithium batteries: there is danger of explosion if a battery is replaced with an incorrect type of battery. Replace only with the same or equivalent type. VPrecautions concerning batteriesMisuse of batteries could cause them to rupture or leak leading to fire, injury or the staining of nearby things. Please read and observe the following pre-cautions carefully. oBe sure to insert the batteries with correct posi-tive (¥) and negative (^) orientations. oUse batteries of the same type. Never use differ-ent types of batteries together. oIf the remote control is not used for a long time (more than a month), remove the batteries to prevent them from leaking. oIf the batteries leak, wipe away the leakage inside the battery compartment and replace the batter-ies with new ones. oDo not use batteries of types other than those specified. Do not mix new batteries with old ones or use different types of batteries together. oDo not heat or disassemble batteries. Never throw batteries into fire or water. oDo not carry or store batteries with other metallic objects. The batteries could short circuit, leak or explode. oNever recharge a battery unless it is confirmed to be a rechargeable type.
4Compliance of radio transmitter and interferenceModel for USADeclaration of ConformityResponsible party: TEAC AMERICA, INC.Address: 1834 Gage Road, Montebello, California, U.S.A.Telephone number : 1-323-726-0303This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con-ditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Labeling of authorizationFCC ID: XEGCR-H101Model for CanadaCompliance of radio transmitterThis device complies with Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions:1) This device may not cause interference; and 2) This device must accept any interference, includ-ing interference that may cause undesired operation of the device.Labeling of authorizationIC: 1559C-CRH101Compliance of interferenceThis Class B digital apparatus complies with Canadian ICES-003.CAUTIONAuthorization of wireless devices are different in countries or regions. Please use only in the country where you purchased the product. oDepending on the country, restrictions on the use of Bluetooth wireless technology might exist.Wireless equipment precautionsRadiation Exposure requirementsThis equipment meets the regulation, which is recog-nized internationally, for the case of human exposure to radio waves generated by the transmitter.Statement of complianceModel for USAThis equipment complies with FCC radiation expo-sure limits set forth for an uncontrolled environment and meets the FCC radio frequency Exposure Guidelines.Model for CanadaThis equipment complies with IC RSS-102 radia-tion exposure limits set forth for an uncontrolled environment.CAUTIONChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
5Laser informationThis product contains a semiconductor laser system inside the cabinet and is classified as a “CLASS 1 LASER PRODUCT”.To prevent being exposed to the laser beam, do not try to open the enclosure.Laser:Type: EP-HD870PBManufacturer: GUANGDONG EVER BRIGHT GROUP CO.,LTDLaser output: Less than 1 mW on the objective lensWavelength: 792±25 nmModel for USA This product has been designed and manufactured according to FDA regulations “title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968”, and is classified as class ! laser product. There is not hazardous invisible laser radiation during operation because invisible laser radiation emitted inside of this product is completely confined in the protective housings.The label required in this regulation is as follows:Front sideBottomInformation for interference (FCC requirements)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-ference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. oReorient or relocate the equipment and/or the receiving antenna. oIncrease the separation between the equipment and receiver. oConnect the equipment into an outlet on a cir-cuit different from that to which the receiver is connected. oConsult the dealer or an experienced radio/TV technician for help.
1115 MA-2225AThis device has a serial number located on its back panel. Please record the serial number and retain it for your records.Model name: CR-H101 Serial numberTEAC CORPORATION 1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan Phone: +81-42-356-9156TEAC AMERICA, INC. 1834 Gage Road, Montebello, California 90640 U.S.A. Phone: +1-323-726-0303TEAC AUDIO EUROPE Liegnitzer Straße 6, 82194 Gröbenzell, Germany Phone: +49-8142-4208-141Z

Navigation menu