TCL Communication B072 MOVETIME Track & Talk watch User Manual

TCL Communication Ltd. MOVETIME Track & Talk watch Users Manual

Contents

Users Manual

CJB1F61ALAAAMOVETIME Track&Talk watchQuick Start Guide
2Know your watchOverviewFront BackBCDEFGAHIJAWatch-buonBSpeakerCVolume + On the Home screen: Press to open the phonebook, press again to choose contacts.In the List mode: Press to increase the volume or page up.DVolume - On the Home screen: Press to enter the voice messages list. In the List mode: Press to decrease the volume or page down.When you have an incoming voice call, short press to answer.Press for 3 seconds to start recording.
3ESOS key Emergency calls: Long press the ‘SOS’ key for at least 3 seconds.FPower key • Power on/o.• Enter into the volume list.• When you have an incoming call, short press to reject the call.• On the Home screen, short press to enter the volume mode.• On all screens other than Home, short press once to go back.• Depress the buon for at least 8 seconds to iniate a system reboot.GMicrophoneHWristbandISIM slotJCharging portNotes: • The screen will light up by pressing any key.• Watch only supports GPRS network and Nano SIM card without encrypng PIN code.ScreenBaery powerTimeDateG: GPRSR: RoamingStepsSignal strengthVoice SMS ps When the watch is roaming, the right side of the signal bar will appear “R”. At the same me, prompt informaon will display in the message bar in the applicaon. Note: Consult the local operators to open the roaming service.
4Inserng Nano SIM card
5Basic operaons on your watchPower on/oPress and hold the Power key for 3 seconds to power on/o your watch.Press and hold the Power key for 8 seconds to reboot when your watch crashes.SOSPress and hold the SOS key for 3 seconds on any screen (except the incoming/ongoing/dialing call screen) to call ve key family members.1. Once your watch has obtained a x on your locaon, it will send details of your locaon to 10 chosen family members. (Applicaon shows the SOS alarm screen with prompt).2. It will aempt to dial 10 chosen numbers in turn. If there is no answer within 10 seconds, it will move onto the next number in the list unl a call successfully connects.3. If a SIM card is not inserted, or if the watch does not have a signal, the SOS feature will instead aempt to dial 112 (Emergency services). You can press the Power Key at any me to either cancel the call setup or hang up the call. Note: Currently emergent number is not set by default, you can customize it.Note: Press the Power key to interrupt the call.Sending a voice message1. Press Volume - for 3 seconds to start recording.2. Release to stop recording, as well as to send the voice message.3. When nishes sending, it will go back to the last screen.Note: Nocaon icon will ash when your watch receives a voice message.Voice message management• Press Volume + to scroll up the menu.• Press Volume - to scroll down the menu.• Short press the Power key to go back to the Home screen.Note: The storage is limited to 30 voice messages. If there are more than 30 messages, the message will be overwrien automacally.Calling and answering1. Short press Volume + to enter the family number list.2. Short press Volume + to choose the next family number.
63. Press Volume - for 3 seconds to send a voice message to chosen family number.Note: Press the Power key to go back to the Home screen.Volume adjustment• Short press power on/o buon rst, then press Volume + to increase the volume.• Short press power on/o buon rst, then press Volume - to decrease the volume.Note: Decrease the volume to mute your watch. When you have an incoming call, your watch will vibrate.Power o & Airplane modeLong press the Power key for 3 seconds to enter “Power o & Airplane mode” screen.UpdateWatch will install the rmware automacally aer nishing downloading.
7Using the applicaon from your smartphoneDownload the applicaon from App Store or Google play.PairingInput the IMEI to pair your watchObtain the informaon of IMEI number through the package informaon or pressing Volume +/- and the SOS key in the same me unl the informaon displayed on the screen. Then input the IMEI number to the applicaon informaon bar and conrm.Input IMEI and press Conrm.The server will send a random code to your watch and the informaon displayed on the screen should be noted at this me. Input the random code to the applicaon informaon bar and conrm.
8Scan the QR code to pair your watchYou can share the QR code to add some group members. Scanning the QR code will be automacally adjusted according to the interval me. FunconsApplicaon screenSlide le to nd the list Hide or show the shortcut menu.Click to refresh the watch locaon instantly.
9Click to enter the details page of Electronic fence.Click to jump to the navigaon page.Steps.Power.Click to enter the voice message screen.Click to dial by the watch.Member managementTouch Family numbers to open the member list.Set the local emergency call number here.Note: Each device will have only one administrator, and the user will be regarded as an administrator for the rst me.
10Administrator can transfer the management rights in the members’ management page. Voice messageTouch to enter the voice screen.When you create a voice message, the length of each recording is 15s. You can dialogue with some group members, or dialogue with your children alone.
11Safe zoneTouch to enter the Safe zone screen.In this funcon, you can set an area on the map as a safe area for your child. When your child leaves the security area, you will be noed. Pay aenon that the meliness of the nocaon will depend on the frequency of the locaon. The longer interval me for posioning that you set, the me to receive the nocaon will be relavely longer.Save powerTouch to enter the power screen.You can choose the locaon frequency according to the daily usage habit. Dierent posioning mode will aect the posioning accuracy and standby me. Choose the appropriate use mode according to the actual scene.
12Mute meTouch Mute me to set the reminder funcon of your watch.You can set to mute or cancel the vibraon according to the actual environment in use by your children. Pay aenon that in the silent mode, children can recover the seng by adjusng the volume of the watch. But in the vibraon mode, it need to be recovered through applicaon seng.UpgradeTouch Update to upgrade your watch and App.The status bar at the boom will display the related downloading progress when upgrading. Be aware that the watch relies on the network when upgrading. It will use a certain amount of data.
13FAQ1. Unable to obtain the posion of your watchGo to check if your watch has a SIM card or if you’re in a place where can’t receive the signal. If SIM was inserted with device already powered on, it will not register as this device does not support “hot swap”. In this case user will need to restart (power o/on device) to restore service.2. Unable to obtain the vericaon code You need to open the relevant SMS receiving service. For more informaon, consult your local operators. 3. Waterproof noceThis product has an IP65 rang which means it is protected against water jets. Do not submerge your watch in water, for example when swimming.4. Posioning accuracyYour watch will provide three kinds of posioning modes: GPS, Wi-Fi, LBS. Posion accuracy will be dierent according to dierent posioning methods. All posion informaon is only for reference in a certain range.5. Data serviceThe posion informaon of watch and remote seng caused by voice message and applicaon will be working based on the communicaon between GPRS network and cloud server. It will consume the data which need to be paid by yourself.6. SOSThe guardian should be familiar with the specic operaon of SOS and the operaon instrucon for children. 7. Whether the material of this product is harmful to children The material in use has passed related safety tesng for children, which can ensure the safety of daily use.8. ChargingWhen the charging port is corroded or dirty, it will seriously aect the charging process which requires a clean surface. Aer playing sports, wipe any sweat from your watch before charging.
149. Storage and use of locaon data for userFor all the data related to you, we will only use the queries you submit to us. We will not use for any commercial applicaon or development without authorisaon.www.sar-ck.comThis product meets applicable naonal SAR limits of 4W/kg.The specic maximum SAR values can be found in the secon of this user guide.When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 0 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transming even if you are not making a phone call.CercaonWEEE ApprovalThis device is in compliance with the essenal requirements and other relevant provisions of the Waste Electrical and Electronic Equipment Direcve 2012/19/EU (WEEE Direcve).This symbol on device means that these products must be taken to collecon points at the end of their life:- Municipal waste disposal centres with specic bins for these items of equipment.- Collecon bins at points of sale.They will then be recycled, prevenng substances being disposed of in the environment, so that their components can be reused.In European Union countries:These collecon points are accessible free of charge.All products with this sign must be brought to these collecon points.In non European Union jurisdicons:Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdicon or your region has suitable recycling
15and collecon facilies; instead they are to be taken to collecon points for them to be recycled.CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCRDING TO THE INSTRUCTIONSFollowing air regulaon, the baery of your product is not charged. Please charge it rst.RoHs ApprovalThis device is in compliance with the restricon of the use of certain hazardous substances in electrical and electronic equipment Direcve 2011/65/EU (RoHs Direcve).CHARGERSChargers will operate within the temperature range of: 0°C to 40°C.The chargers designed for your device meet with the standard for safety of informaon technology equipment and oce equipment use. They are also compliant to the eco design direcve 2009/125/EC. Due to dierent applicable electrical specicaons, a charger you purchased in one jurisdicon may not work in another jurisdicon. They should be used for this purpose only.The charger shall be installed near the device and shall be easily accessible.Federal Communicaons Commission (FCC) Declaraon of ConformityThis device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon.Changes or modicaons not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon.If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
16• Reorient or relocate the receiving antenna.• Increase the separaon between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.FCC Cauon:Changes or modicaons not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.FCC RF Exposure Informaon (SAR):This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communicaons Commission of the United States.During SAR tesng, this is set to transmit at its highest cered power level in all tested frequency bands, and placed in posions that simulate RF exposure in usage near the body with the separaon of 0 mm. Although the SAR is determined at the highest cered power level, the actual SAR level of the device while operang can be well below the maximum value. This is because the device is designed to operate at mulple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base staon antenna, the lower the power output.The exposure standard for wireless devices employs a unit of measurement known as the Specic Absorpon Rate, or SAR. The SAR limit set by the FCC is 4W/kg.Tests for SAR are conducted using standard operang posions accepted by the FCC with the device transming at its highest cered power level in all tested frequency bands.The FCC has granted an Equipment Authorizaon for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR informaon on this model device is on le with the FCC and can be found under the Display Grant secon of HYPERLINK “hp://www.fcc.gov/oet/ea/fccid” www.fcc.gov/oet/ea/fccid aer searching on FCC ID: 2ACCJB072.For this device, the highest reported SAR value for usage near the body is:Maximum SAR for this model and condions under which it was recorded.Body-worn SAR GSM 1900 2.57 W/kg
17SAR compliance for body operaon is based on a separaon distance of 0 cm between the device and the human body. During use, the actual SAR values for this device are usually well below the values stated above. This is because, for purposes of system eciency and to minimize interference on the network, the operang power of your device is automacally decreased when full power is not needed. The lower the power output of the device, the lower its SAR value.Body-worn SAR tesng has been carried out at a separaon distance of 0 cm. To meet RF exposure guidelines during body-worn operaon, the device should be posioned at least this distance away from the body.If you are not using an approved accessory ensure that whatever product is used is free of any metal and that it posions the device the indicated distance away from the body.Organizaons such as the World Health Organizaon and the US Food and Drug Administraon have suggested that if people are concerned and want to reduce their exposure they could use a hands-free accessory to keep the wireless device away from the head or body during use, or reduce the amount of me spent on the device.For more informaon you can go to www.alcatel-mobile.com;Addional informaon about electromagnec elds and public health are available on the following site: hp://www.who.int/peh-emfThis device is equipped with a built-in antenna. For opmal operaon, you should avoid touching it or degrading it.LicensesThis equipment is in compliance with the essenal requirements and other relevant provisions of Direcve 1999/5/EC. The enre copy of the Declaraon of Conformity for your device can be obtained through our Website: www.alcatel-mobile.comWarrantyThe device is warranted against any deviaon from technical specicaons for a period of twelve (12) (1) months from the date specied on your original invoice.(1) The warranty period may vary depending on your country.
18Under the terms of this warranty, you must immediately inform your vendor in case of a conformity defect on this device, and present a proof of purchase.The vendor or repair center will decide whether to replace or repair this device, as appropriate.Repaired or replaced this device is warranted ONE (1) month unless there are statutory provisions to the contrary.This warranty shall not apply to damage or defects to this device due to:1) Not following the instrucons for use or installaon,2) Not being compliant with technical and safety standards applicable in the geographical area where this device is used,3) Improper maintenance of sources of energy, and of the overall electric installaon,4) Accidents or consequences of the of the vehicle in which this device is transported, acts of vandalism, lightning, re, humidity, inltraon of liquids, inclement weather,5) Connecng to or integrang into this device any equipment not supplied or not recommended by the manufacturer,6) Any servicing, modicaon or repair performed by individuals not authorised by the manufacturer, the vendor or the approved maintenance centre,7) Use of this device for a purpose other than that for which it was designed,8) Malfuncons caused by external causes (e.g., radio interference from other equipment, power voltage uctuaons),9) Faulty connecons resulng from unsasfactory radio transmission or caused by the absence of radio relay coverage.Warranty is also excluded for this device on which markings or serial numbers have been removed or altered.This device is also warranted against hidden defects (defects inherent in the design, manufacture, etc.).There are no other express warranes than this printed limited warranty, expressed or implied, of any nature whatsoever.In no event shall the manufacturer be liable for incidental or consequenal damages of any nature whatsoever, including but not limited to trading loss, commercial loss, to the full extent those damages can be disclaimed by law. Some countries/states do not allow the exclusion or limitaon of incidental or consequenal damages, or limitaon of the duraon of implied warranes, so the preceding limitaons or exclusions may not apply to you.

Navigation menu