System Level Solutions PI0NL02000100 Nebulae Module V2 User Manual

System Level Solutions (India) Pvt. Ltd. Nebulae Module V2

15_PI0NL02000100 UserMan

System Level Solutions, Inc. (USA) 14100 Murphy AvenueSan Martin, CA 95046 (408) 852 - 0067http://www.slscorp.comModule Version: 1CDocument Version: 1.4Document Date: June 2018Nebulae Module V2Datasheet
iiNebulae Module V2 DatasheetSystem Level SolutionsJune 2018 Copyright ©2018, System Level Solutions, Inc. (SLS) All rights reserved. SLS, an Embedded systems company, the stylized SLS logo, specific device designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of SLS in India and other countries. All other products or service names are the property of their respective holders. SLS products are protected under numerous U.S. and foreign patents and pending applications, mask working rights, and copyrights. SLS reserves the right to make changes to any products and services at any time without notice. SLS assumes no responsibility or liability arising out of the application or use of any information, products, or service described herein except as expressly agreed to in writing by SLS. SLS customers are advised to obtain the latest version of specifications before relying on any published information and before orders for products or services.ds_nebulaemodule_v2_1.4
iii System Level SolutionsNebulae Module V2 Datasheet June 2018About this Manual Revision History Table below shows the revision history of Nebulae Module V2’s datasheet.Version Date Description1.4 June 2018 •Update Table 1.1 in Chapter 1•Added Annexure A: FCC Statement and Annexure B: Module Statement1.3 April 2018 •Update Figure 1.1 and Table 1.1 in Chapter 11.2 November 2017 •Updated Table 1.1 in Chapter 1•Updated Table 2.1 in Chapter 21.1 October 2017 Update Figure 1.1 and 1.2 in Chapter 11.0 March 2017 First publicationHow to Find Information•The Adobe Acrobat Find feature allows you to search the contents of a PDF file. Use Ctrl + F to open the Find dialog box. Use Shift + Ctrl + N to open to the Go To Page dialog box.•Bookmarks serve as an additional table of contents.•Thumbnail icons, which provide miniature preview of each page, provides a link to the pages.•Numerous links shown in Navy Blue color allow you to jump to related information.How to Contact SLSFor the most up-to-date information about SLS products, go to the SLS worldwide website at http://www.slscorp.com. For additional information about SLS products, consult the source shown belowInformation Type E-mailProduct literature services, SLS literature services, Non-technical customer services, Technical support.support@slscorp.com
ivNebulae Module V2 DatasheetSystem Level SolutionsJune 2018Typographic ConventionsThis datasheet uses the typographic conventions as shown below: Visual Cue MeaningBold Type with Initial Capital lettersAll headings and Sub headings Titles in a document are displayed in bold type with initial capital letters; Example: General Description, Features. Bold Type with Italic Letters All Definitions, Figure and Table Headings are displayed in Italics. Examples: Figure 1-1. Nebulae Module V2, Table 1-1. Nebulae Module V2 Specifications.1., 2. Numbered steps are used in a list of items, when the sequence of items is important. such as steps listed in procedure.•Bullets are used in a list of items when the sequence of items is not important.The hand points to special information that requires special attentionThe caution indicates required information that needs special consideration and understanding and should be read prior to starting or continuing with the procedure or process.The warning indicates information that should be read prior to starting or continuing the procedure or processes.The feet direct you to more information on a particular topic.
vSystem Level SolutionsJune 2018Nebulae Module V2 DatasheetContents About this Manual.............................................................................................................. iiiRevision History ......................................................................................................................................iiiHow to Find Information .........................................................................................................................iiiHow to Contact SLS ................................................................................................................................iiiTypographic Conventions ........................................................................................................................iv1. Overview .................................................................................................................................... 1General Description .................................................................................................................................. 1Benefits .....................................................................................................................................................1Specifications ............................................................................................................................................32. Pin-Out Information .................................................................................................................. 63. Package Information................................................................................................................. 8Annexure A: FCC Statement .......................................................................................................... 9Annexure B: Module Statement .................................................................................................. 11
1Nebulae Module V2 DatasheetSystem Level SolutionsJune 20181. Overview General DescriptionThe Nebulae Module V2 provides a means for any electronic device to implement low cost wireless connectivity. This module inter operates with either Zigbee or 6LoWPAN devices depending on the programmed stack.Nebulae Module V2 is ideal for applications in the energy and controls markets where manufacturing efficiencies are critical.The Nebulae Module V2, built around the NXP JN5169 SoC (system on a chip) radio IC, integrates an 802.15.4 radio along with a powerful programmable 32-bit RISC CPU. The architecture isolates the wireless software without sacrificing RF performance or security for applications. Quickly and efficiently create customized applications with the Nebulae Module V2.Benefits The main benefits of the Nebulae Module V2 are:Customizable Zigbee and 6LoWPAN applications with a programmable CPUA rich set of hardware peripherals such as GPIO, UART, SPI, I2C, ADC, and PWMA great choice for battery oriented applications with various sleep modes•Sleep with IO wake up•RAM Retention•Low Power mode•Deep Sleep modeProvides an OTA (Over the Air) Firmware update mechanismSupports Mesh networking for both Zigbee and 6LoWPANSupports deployment of a dense network with 6LoWPAN
Benefits 2System Level SolutionsJune 2018Nebulae Module V2 DatasheetFigure 1-1. shows the Nebulae Module V2.Figure 1-1. Nebulae Module V2 Figure 1-2. shows Nebulae Module V2 application example.
3Nebulae Module V2 DatasheetSystem Level SolutionsJune 2018OverviewFigure 1-2. Nebulae Module V2 Application Example Specifications Table 1-1 describes specifications of the Nebulae Module V2.Table 1-1. Nebulae Module V2 SpecificationsPerformanceData Rate Up to 250KbpsRange 80 Meters Line of Sight (LoS)TX Current Consumption 23.3mA@ +10dBm; 19.6mA@ +8.5dBm; 14mA @ +3dBmRX Current Consumption 15mA@ +10dBm; 13mA@ 0dBmRX Sensitivity -96 dBm
Specifications 4System Level SolutionsJune 2018Nebulae Module V2 DatasheetFeaturesSerial Interface SPI 1 SPI 3 SelectsI2C 1 Interface 2 WireUART 2 UARTConfiguration Method API local and from cloudFrequency Band ISM 2.4 GHzInterference Immunity DSSS (Direct Sequence Spread Spectrum)ADC Inputs Up to 6-input 10-bitDigital IO Up to 20Antenna Options U.FL ConnectorSize (LxWxH in mm) 21.99 x 34 x 3.05PWM Up to 5 PWM 4 Timers 1 CounterModes Active Sleep Deep Sleep CPU Processing 1 MHz – 2.5mA 0.6 uA 50 nA32 MHz – 7.8 mA - -ProgrammabilityMemory 512 kB Flash 32 kB RAM 4 kB EEPROMClock/ Speed 1 MHz to 32 MHz CPU 32 Bit RISCNetworking and SecurityProtocol 6LoWPAN ZigbeeEncryption AES 128 BitReliable Packet Delivery Retries, AcknowledgementsIDs PAN IDAddress IPv6 Address to all nodesChannels 16Power RequirementSupply Voltage 2.0V to 3.6V DCTemperature -40 ºC to 125 ºCModule Software StackZigbee Zigbee Pro StackTable 1-1. Nebulae Module V2 Specifications
5Nebulae Module V2 DatasheetSystem Level SolutionsJune 2018Overview6LoWPAN Nebulae 6LoWPAN StackFeatures :Three tier securityTime synchronizationSelf healingRemote firmware update IPv6 enabled full IP networkingSmart network managementEasy network installation and deploymentSupports dense network with flexible routingPower management, long battery lifeDesign to withstand failureHighly scalable networkModule AccessoriesModel TLB-2400-3.0BQManufacturer Shenzhen Gerbole Elec. Technology Co., Ltd.Gain 3dBiType Whip-TiltConnection Type RP-SMAFrequency Range 2400 +/-100Module to Antenna Connection TypeU.FL to RP-SMA CableTable 1-1. Nebulae Module V2 Specifications
6Nebulae Module V2 DatasheetSystem Level SolutionsJune 20182. Pin-Out Information Table 2-1 shows the Nebulae Module V2 Pin-Out.Table 2-1. Nebulae Module V2 Pin-OutPinNo # Signal Name Direction DefaultState Description1 GND - - Ground2 VCC - - Power supply3 DIO11/PWM1/TXD1 Bidirectional Output DIO6/ UART 0 transmit data output4 DIO9/TIM0CAP/32KXTALIN/RXD1/32KIN(1) Bidirectional Input DIO7/ RXD0 - UART 0 receive data input5 DIO16/SPISMOSI/SIF_CLK/COMP1P Bidirectional - DIO16/ COMP1P - comparator plus input6 RESET_N Input - Reset input7 DIO8/TIM0CK_GT/PC1/PWM4 Bidirectional Output DIO8/RX signal strength indicator8 DIO6/TXD0/JTAG_TDO/PWM2 Bidirectional - DIO11/ PWM1 output9 DIO19/SPISEL0 Bidirectional - DIO19/ SPI - bus master select output 010 DIO7/RXD0/JTAG_TDI/PWM3 Bidirectional Input DIO9/Pin sleep control line11 GND - - Ground12 DIO3/RFTX/TIM0CAP/ADC6 Output Output DIO313 GND - - Ground14 DIO15/SIF_D/RXD0/RXD1/JTAG_TDI/SPISEL2/SPISCLKInput Input DIO15/ SPI - bus slave clock input15 DIO14/SIF_CLK/TXD0/TXD1/JTAG_TDO/SPISEL1/SPISSELInput Input DIO14/ SPI - bus slave select input16 DIO12/PWM2/CTS0/JTAG_TCK/ADO/SPISMOSIInput Input DIO12/ SPI - bus slave master out, slave in input17 DIO13/PWM3/RTS0/JTAG_TMS/ADE/SPISMISOOutput Output DIO13/ SPI - bus slavemaster in slave out output18 Reserved - Disabled Do not connect
7Nebulae Module V2 DatasheetSystem Level SolutionsJune 2018Pin-Out Information19 Reserved - Disabled Do not connect20 Reserved - Disabled Do not connect21 Reserved - Disabled Do not connect22 GND - - Ground23 DIO18/SPIMOSI Bidirectional - DIO18/ SPI - bus master out slave in output24 DIO17/SPISMISO/SIF_D/COMP1M/PWM4 Bidirectional - DIO17/ comparator minus input25 DIO4/CTS0/JTAG_TCK/TIM0OUT/PC0Bidirectional Output DIO4/ UART 0 clear to send input26 DIO10/TIM0OUT/32KXTALOUT Bidirectional Output DIO10/Device statusindicator27 VREF Input - Analog peripheral reference voltage/ ADC input 228 DO0/SPICLK/PWM2 Bidirectional Output DO0/ SPI - bus master clock output29 DIO5/RTS0/JTAG_TMS/PWM1/PC1 Bidirectional Input DIO5/ UART 0 request to send output30 DIO0/ADO/SPISEL1/ADC3 Bidirectional - DIO0/ ADC input : ADC331 DIO1/ADE/SPISEL2/ADC4/PC0 Bidirectional - DIO1/ ADC input : ADC432 DIO2/RFRX/TIM0CK_GT/ADC5 Bidirectional - DIO2/ ADC input : ADC533 ADC1 Bidirectional Input ADC input34 DO1/SPIMISO/PWM3 Bidirectional - DO1/ SPI - bus master in, slave out input35 GND - - Ground36 RF_IO Bidirectional - RF antenna37 Reserved - Disabled Do not connectNote:(1) Default: Pull downTable 2-1. Nebulae Module V2 Pin-OutPinNo # Signal Name Direction DefaultState Description
8Nebulae Module V2 DatasheetSystem Level SolutionsJune 20183. Package Information Figure 3-1. shows Physical Dimensions of the Nebulae Module V2.Figure 3-1.Nebulae Module V2 Physical Dimensions
9Nebulae Module V2 DatasheetSystem Level SolutionsJune 2018Annexure A: FCC Statement (OEM) Integrator has to assure compliance of the entire end-product incl. the integrated RF Module. For 15 B (§15.107 and if applicable §15.107) compliance, the host manufacturer is required to show compliance with 15 while the module is installed and operating. Furthermore the module should be transmitting and the evaluation should confirm that the module's intentional emissions (15C) are compliant (fundamental / out-of-band). Finally the integrator has to apply the appropriate equipment authorization (e.g. Verification) for the new host device per definition in §15.101.Integrator is reminded to assure that these installation instructions will not be made available to the end-user of the final host device.The final host device, into which this RF Module is “integrated” has to be labelled with an auxilliary label stating the FCC ID of the RF Module, such as “Contains FCC ID:2AO93PI0NL02000100”“This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:1) This device may not cause harmful interference, and2) This device must accept any interference received, including inter-ference that may cause undesired operation.”Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
10 System Level SolutionsJune 2018Nebulae Module V2 Datasheetdetermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
11Nebulae Module V2 DatasheetSystem Level SolutionsJune 2018Annexure B: Module Statement The single-modular transmitter is a self-contained, physically delineated, component for which compliance can be demonstrated independent of the host operating conditions, and which complies with all eight requirements of § 15.212(a)(1) as summarized below.3). The radio elements have the radio frequency circuitry shielded.4). The module has buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal.5). The module contains power supply regulation on the module.6). The module contains a permanently attached antenna.7). The module demonstrates compliance in a stand-alone configura-tion.8). The module is labeled with its permanently affixed FCC ID label9). The module complies with all specific rules applicable to the trans-mitter, including all the conditions provided in the integration instructions by the grantee.10). The module complies with RF exposure requirements. This transmitter/module must not be collocated or operating in conjunction with any other antenna or transmitter.

Navigation menu