Sysgration FTR-CBX3000 FM Modulator User Manual

Sysgration Ltd. FM Modulator Users Manual

Users Manual

Owner's ManualHMD-0702Headrest Video Monitor with Built-in DVD
It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver's seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. In the interest of safety, the unit should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle. This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference that may be received, including interference that may cause undesired operation.For safety reasons, when changing video disc it is recommended that the vehicle be not in motion, and that you do not allow children to unfasten seat belts to change disc or make any adjustments to the system. System adjustments can be accomplished using the remote control unit, while seatbelts remain fastened. Enjoy your entertainment system but remember safety of all passengers remains the number one priority. -1-Important Notice Safety Precaution
Product Features-2-w7-Inch Color TFT-LCD Panel with 16:9 aspectwBuilt-in Top-loading Slot-in DVD loader.wInfrared Transmitters for wireless HeadphonewAux Input Source * 1 (3 RCA jacks)wMonitor Input Source * 2 (Din jacks)wAux Monitor Output Source * 2 (Slave 3 RCA jacks)wMonitor Output Source * 3 (Din jacks)wForward Remote Sensor on the Front PanelwThe unit with a Control Boxw5 Control Buttons on the Front Panel---MENU, UP, DOWN, POWER and SOURCEwOSD(On Screen Display) Controlw12V DC Power Input
-3-Table of ContentsWiring and Installation-----------------------------------------------------------------4Control Buttons on Front Panel------------------------------------------------------6Remote Control Operations-----------------------------------------------------------9General Operating Instructions--------------------------------------------------------------------13Accessories------------------------------------------------------------------------------15DVD Basics------------------------------------------------------------------------------16Playing Audio CD----------------------------------------------------------------------22Playing MP3 CD----------------------------------------------------------------------23Warnings/TroubleShooting-----------------------------------------------------------25Specifications--------------------------------------------------------------------26
Wiring and Installation-4-
Control Buttons on Front Panel -5-
MENU Enter and navigate the OSD menus (Main Menu and Hidden Menu).UP Increase the value or navigate the options upwards.DOWN Decrease the value or navigate the options downwards. SOURCE Select the AV source among AV1/AV2/AV3POWER Soft-power on/off. Function DescriptionsIR Sensor Allow the remote controller to navigate the OSD(On Screen Display) on this unit and to control other accessories.Infrared Transmitters Be used to transmit audio to the wireless headphone. -6-
Level Lock and Release Latch Allow the user to adjust the viewing angle of LCD panel or lock the panel into the secure position. -7-
Remote Control Operations BATTERY INSTALLATIONBefore attempting to operate your remote control, inst- all the batteries as described below. (1)Turn the remote control face down. Press down on the ridged area of the battery cov- er and slide it off. (2)Install two "AAA" batteries as shown. Make sure that proper polarity(+ or -) is observed. (3)Slide the cover back until it clicks.The remote control will operate the unit. It is not a univ- ersal remote control and will not control other equipme- nts.-8-
MONITOR FUNCTION MONITOR POWER Press this button to turn the monitor ON. The current video source will be displayed on screen, and the picture will appear in a few seconds. Press the button again to turn the monitor OFF. SOURCE Any video equipment connected to the AV inputs can be used with the monitor by pressing this button. Each time thebutton is pressed, the AV source will change in the following seque- nce DVD Input Source. DOWN (1) Shift left or down OSD menu. (2) Decrease the value of TINT, COLOR, BRIGHTNESS, or CONTRAST bar. UP (1)Shift right or up OSD menu. (2) Increase the value of TINT, COLOR, BRIGHTNESS, or CONTRAST bar.-9-Function Descriptions ZOOM Select the screen-mode among wide/normal/cinema/zoom. PICTURE Press this button to enter OSD menu(Hidden menu) can be change the value of TINT, COLOR, BRIGHTNESS, or CONTRAST. FM ON/OFF Press this button to turn on Frequency Modulator. Press this button Again to turn off Frequency Modulator. FM SELECT Press this button to select Frequency Modulator channel.
DVD FUNCTION DVD POWER Press this button to turn the DVD ON. The current video source will be displayed on screen, and the picture will appear in a few seconds. Press the button again to turn the DVD OFF. EJECT Eject disc from disc compartment or pull disc into the compa- Rtment. UP Shift up DVD SETUP menu. DOWN Shift down DVD SETUP menu. RIGHT Shift right DVD SETUP menu. LEFT Shift left DVD SETUP menu. ENTER Make a selection. RETURN Return to previous menu screen or playing point. SETUP Navigate SETUP MENU. There are 4 pages to configure sys- tem： (1)Geneal Setup Page. (2)Audio Setup Page. (3)Preference Page. (4)Password Setup Page. TITLE Navigate the Title Menu included in the disc. MENU Go to Root Menu included in the disc. AUDIO DOWN Press this button to decrease DVD volume. AUDIO UP Press this button to increase DVD volume. SUBTITLE AUDIO Change the audio language to another available language (Only if the disc contains multiple audio languages). REPEAT(Except VCD with PBC on) Repeats part or all of a chapter, title, track, or an entire disc. A-B(Except Mp3) Repeat from point A to point B. GOTO Navigate the Goto Menu and go to the desired title, chapter, track or song inside the disc. Change the subtitle language to another available language or set off (only if the disc contains multiplesubtitle languages). -10-
DISPLAY Show information on the left-up corner on the screen inclu- ding Title, chapter/track, time elapsed, and time remained, or turn off the display. PLAYMODE For mp3 use. MUTE Press this button to shut off the sound at the headphone stat- ion. The screen will display that the sound has been turned off. Pressing the button again restores sound to the revious- ly set Level. ZOOM (1) Enlarge the picture in the movie by 2x, 3x and 4x. (2) Shrink the picture in the movie by 1/2x,1/3x, and 1/4x. PLAY Press this button to play a movie while disc is loaded into the disc compartment. For more information , consult the DVD Basics section. STOP Stop playing the movie or songs. STOP -> PLAY: Resume playing, STOP -> STOP -> PLAY: Resume from the point being stopped. PAUSE Press this button to pause a movie while disc is loaded into the disc compartment. For more information , consult the DVD Basics section. SLOW Press this button movie will be play slow motion. There are 3 speed options to choose:1/2 , 1/4 , 1/8. FR(Fast Rewind) Press button to search disc backward continuously. There are 5 speed options to choose like FF ( Fast Forward) is. FF(Fast Forward) Press button to search disc forward continuously. There are 5 speed options to choose: 2X, 4X,8X,16X, and 32X. PREV Play the previous chapter or track. NEXT Play the next chapter or track. PBC ( Video CD only) Turn the PBC ( Play Back Control) on or off. NUMBERS Decimal number: 0 to 9-11-
OSD FUNCTION CONTROLOSD MAIN MENU Press MENU key to enter OSD main menu, then select Item in the menu by continuously hitting MENU key. CONTRAST Adjust CONTRAST value from 0 -32 (default:16) BRIGHTNESS Adjust BRIGHTNESS value from 0-32 (default:16) COLOR Adjust COLOR value from 0-32 (default:16) TINT Adjust TINT value from 0-32 (default:16) SHARPNESS Adjust SHARPNESS value from 0-32 (default:16) SCREEN AUTO(AUTO/ON/OFF) Set the unit condition when power connected the system AUTO: When power connected the machine, the machine will soft-power on or off, It based on the machine was soft-power on or off last time. ON: When power connected the machine, the machine will soft-power on. OFF: When power connected the machine, the machine will not soft-power on. WIDE SCREEN Select the screen-mode among wide/normal/cinema/zoom. RESET DEFAULT Reset all OSD adjust value to default.(except screen-mode)Turning the unit ON or OFF-12-
OSD HIDDEN MENU Press MENU key for 5 seconds to enter or leave OSD hidden menu then select item in the menu by continuously hitting MENU key. IR PHONE(OFF/A/B) Select Infrared Transmitters channel. FM CHANNEL(OFF/CH1/CH2/CH3/CH4/CH5/CH6) Select Frequency Modulator channel. MIRROR(OFF/ON) Set display screen mirror. -13-
The unit incorporates an infrared sensor which relays signals from the remote control to be controlled simply by pointing its remote control at the remote sensor eye. This provides control of auxiliary equipment such as an Video Cassette Player. The infrared sensor can relay signals from any manufacturer 's remote control to its respective component connected to the AUX input, such as a DVD player. In this case you must use the remote control supplied with the DVD player. -14-Remote Sensor
AccessoriesThis unit includes a built-in dual channel infrared trans- mitter for use with a wireless headphone. The volume can then be adjusted with the controls on each headset . The wireless headphone must be used within a line of sight from the transmitter, as infrared transmission, like visible light travels only in a straight line.Wireless Headphone-15-
DVD BasicsTo get the optimum use out of DVD, make sure you read this section completely.Both the DVD player and disc are coded by region. The- se regional codes must match in order for the disc to play. If the codes don't match, the disc won't play. This unit's code is region 1. Other regional codes can't be played in this unit.Types of Discs your DVD Will PlayDVD-Video: DVD contains video.CD-DA: CD contains musical or sound content only.CD-Video: CD contains movie only.CD-R/RW: A disc that contains audio files (for example, a CD-R with downloaded Mp3 Files), MPEG, or JPEG files.Loading and Playing DiscsBefore you load a disc, make sure that it is compatible with the player. Note that the following discs CANNOT be used with this player：Loading and Playing a DiscOptical disc•CD-1, CD-ROM, DVD-ROMMini disc•CDG(audio only, not graphics).When you press the POWER button the unit is on and in DVD mode. Put the disc printed-side up into the disc com-partment about halfway into the slot .The disc will load au-tomatically and begin to play momentarily. Regional Coding-16-
Using the setup display , you can do the initial setup ,adjust the picture quality , and set the various output. You can also set a language for the on-screen display and the setup display, and limit playback by children.The OSD Lang sub-menu allows the user to select the language for the on-screen display. Press and then use the buttons to select the desired language. The user can select either English,French or Spanish for the OSD language.Settings and AdjustmentsUsing the Setup MenuThis chapter describes how to set and adjust using the on-screen setup pages included in the SETUP MENU.To Cancel Using The Setup DisplayPress the SETUP button on the remote.Setting the Language for On-Screen Display(1) Press the SETUP button to display the icons and pages on the display screen.(2) Select the desired page you want by using buttons to move the cursor.Press the SETUP button, use the buttons navigating to General Setup Page, then use the button to select OSD Lang.OSD(On Screen Display) Language Menu-17-
Then press ENTER to confirm the screen.Settings for DisplayPress the SETUP button, use buttons navigating to General Setup Page, and then the button to select TVDisplay sub-menu.The setup allows you to adjust screen setting(aspect ratio). Press and then use the buttons to select the appropriate setting. The options are as follows:Normal/PS(Pan and Scan)This displays the wide picture on the screen with a portion of the left & right sides removed.Normal/LB(Letter-Box)This display the wide picture with black bands on the upper and lower portions of the screen. This option is choose if the LCD panel is of wide screen.Wide(16:9)-18-
Press the SETUP button, and use buttons and go- ing to the Default sub-menu under preference Page. The default setup allow you to reset all options to facto- ry defaults. Press and then press ENTER to carryout the reset. Note : This function will not effect the parental setting. Default Settings-19-
2. Press the ENTER button to confirm the selection.Settings for Parental (Parental Control)This section of the SETUP MENU allows users to control the content of movie playback from G to ADULT. The parental control function allows you to limit viewing to your preference.1. After navigating to the Parental sub-menu under Preference Page, use the buttons to select from: KID SAF (Children) G PG PG 13 PGR R NC-17 ADULTNote : The lower the value , the more strict the limitation.3. Input a password in 4 digits using the numeric buttons then press the ENTER button.Note: The default password is 136900. -20-
Then navigate to the OK button and press ENTER to implement it.-21-Settings for Password(Parental Control Password)Press the SETUP button and navigate to Password sub-memu under Password Setup Page. The menu appears and allows you to change the parental control password. Press and then press ENTER.OLD PASSWORDInput the old password or the default password ( 4digits).NEW PASSWORDInput a new password (4 digits) using numeric buttons.CONFIRM PWDConfirm the new password by entering the same new password again.
Playing Audio CDWhen playing an audio CD, the DISPLAY banner appe- ars automatically. It displays the current track and the amount of the time for that track playing, the total amo-unt of time on the disc and the current time running on the disc. Press the DISPLAY button on the remote to display the DISPLAY banner. The options below show you what happens when you press the DISPLAY button.The default mode for the REPEAT feature is OFF. Pres- sing REPEAT button consecutively changes the REPEAT options as follows:•Track - repeat the track that is playing.•All - repeat the disc that is playing.-22-" Single Elapsed " appears along with the current track playing and the time of that track .Press DISPLAY(1x)" Total Remain " appears along with the current track playing and the amount of time left on CD.Press DISPLAY(2x)" Single Remain " appears along with the current track playing and the amount of time left.Press DISPLAY(3x)" Total Elapsed " appears along with the current track playing and the total time playing on CD.Press DISPLAY(4x)Using the REPEAT Feature As you toggle through the options, the REPEAT option changes that time. The track repeats once that track has ended. The selected repeat option loops repeatedly until you turn it off.
Playing MP3 CDWhen an MP3 disc is inserted in the player, the naviga-tion screen appears automatically. You can change fol-ders and songs through navigating the file system. The DVD player plays the songs in order they were burnedto the disc.1. If a disc is playing, press STOP. Press the UP or DOWN arrow button to go through the folder list on the left side of the navigation screen.2. Once the folder you want is highlighted, press ENTER.MP3 is the format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R/RW discs that have been encoded in MP3format can be played on your DVD player.Selecting Folders and Songs3. Press the UP or DOWN arrow button going through the song list and highlight the song you want. Press ENTER to begin the playback of the highlighted song.-23-
Use NEXT( ) button on the remote control to move to the next song. Use the PREV ( ) button to move to The beginning of the currently playing song. Press the button 2 times to move to the previous song.The default mode for the repeat feature is OFF. Pressing REPEAT consecutively changes the repeat option:•Repeat One - repeat the songs that is playing.•Repeat Folder - repeat the folder that is playing.Skipping SongsSelecting a Play ModeThe play mode options are as follows:•Single:Play a selected song.•Folder:Play the folder in the order the songs were re- corded.•Random:Play the songs in the random order.•Shuffle:Play the songs in random order (from within the selected folder).You can choose what order the songs will play on a disc temporarily. The FOLDER play mode is the default. To access the play mode options, press REPEAT button.Using the REPEAT Feature-24-
(Q1) IR Sensor Inoperative (1) Verify that the batteries in the remote are fresh. (2) Verify that the remote sensor eye is not obstru- cted. (3) Verify that the infrared transmitter is affixed ov- er the sensor eye of the component to be contr- olled. (Q2) No Picture (1) Verify that the correct video input mode is used on the TV. (2) Verify that the video cable is plugged into jack securely.(Q3)No Sound (1) Verify that the correct audio input mode is used on the TV. (2) Verify that the audio cable is plugged into jack Securely.Warnings Trouble ShootingvDo not use any solvents or cleaning materials when cleaning the video system.vDo not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty.vLock the LCD screen in the fully closed position when not in use.vBefore putting on headphones always adjust the volu- me setting to the lowest position.vRemember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain the vehicle battery.vDo not put pressure on the screen.vCaution children to avoid touching or scratching the screen, as it may become dirty or damaged. -25-
LCD Backlighting Resolution Pixels Operation Temperature Storage Temperature Expected Backlight life Sensitivity Video Display System Audio Output Operating Voltage SpecificationsCCFL1440(W)X234(H)o0-60 Co-20-80 C10,000hours35dbNTSC0.5W@16S11 to 16 VDC-26-

Navigation menu