Syncomm Technology IA9Q5S83D-E RF 5G Wireless Module User Manual

Syncomm Technology Corp. RF 5G Wireless Module Users Manual

Users Manual

SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw Syncomm Technology Corp. 10F., No. 101, Sec. 2, Gongdao 5th Rd., East Dist., Hsinchu City, Taiwan, R.O.C. Tel: +886-3-5169188 Fax: +886-3-5169111 http://www.syncomm.com.tw DDaattaa SShheeeett 3URGXFW name：RF 5G Wireless Module  Model 1R：,$46'( Project Code：SMMDIM9QC58RH4 Version 0.2 Aug. 22, 2017
SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw INDEX1. Features .................................................................................................................................................... 3 2. Application .............................................................................................................................................. 3 3. RF Specification ...................................................................................................................................... 4 4. Audio Specification ................................................................................................................................. 5 5. Electrical Specification ............................................................................................................................ 6 6. Mechanical Specification ........................................................................................................................ 7 7. Block Diagram ....................................................................................................................................... 11 8. Interface ................................................................................................................................................. 12 9. Design Reference ................................................................................................................................... 13 10. Antenna Application .............................................................................................................................. 15 11. Ordering Information ............................................................................................................................. 20 12. Revision History .................................................................................................................................... 20 This document is proprietary and confidential to Syncomm Technology Corp. SYNIC and Intelligent Wireless are trademarks of Syncomm Technology Corp. All other trademarks and registered trademarks are the property of their respective owners.
IA9Q5 S83D-E MODULE V3 page - 3 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 1. Features  5.2GHz/5.8GHz ISM Band  GFSK modulation  Low BOM cost  Long distance > 30m (Line of sight)  Support 1-1 duplex mode or 1-N broadcasting mode  RF frequency hopping in 58 channels  Digital I2S audio interface  Support no audio detection function  Audio format 24bit , 32/44.1/48KHz sampling rate  Robust Packet error correction  Low power consumption  No RF induced audio noise  Compatible with FCC/ CE regulations 2. Application  Wireless HTiB Rear Speaker  Wireless Outdoor Speaker  Wireless TV theater  Wireless Audio Sender  Wireless Headphone  Wireless Stereo Ear Microphone
IA9Q5 S83D-E MODULE V3 page - 4 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 3. RF Specification Item Min Typ Max Unit Note Channel Range 5165 ─ 5200 MHz -20dB bandwidth ─ 2.5 ─ MHz RF Output Power 12 dBm Peak power at Antenna port Sensitivity ─ -90 -86 dBm The smaller, the better Table 1 5.2GHz RF Specification Item Min Typ Max Unit Note Channel Range 5740 ─ 5840 MHz -20dB bandwidth ─ 2.5 ─ MHz RF Output Power 11 dBm Peak power at Antenna port Sensitivity ─ -89 -86 dBm The smaller, the better Table 2 5.8GHz RF Specification
IA9Q5 S83D-E MODULE V3 page - 5 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 4. Audio Specification 2.1 CH Item Min Typ Max Unit Note 2.0 CH SNR 90 94 ─ dBr @1kHz THD + N ─ -80 -75 dB @1kHz, the smaller, the better Frequency Response 20 ─ 20k Hz @±1dBm Dynamic range 90 94 dB @1kHz 0.1 CH SNR 90 94 dBr @1kHz THD + N -84 -80 dB @1kHz, the smaller, the better Frequency Response 20 5k Hz @±3dBm Dynamic range 90 94 dB @1kHz Note: Test condition is that using Card type EVB board with ADC: AK5357 at master mode and DAC: AK4386 at master mode. Table 3 ADC to DAC 2.1 CH Item Min Typ Max Unit Note 2.0 CH SNR 135 140 dBr @1kHz THD + N -100 -95 dB @1kHz, the smaller, the better Frequency response 20 20k Hz @±1dBm Dynamic range 95 100 dB @1kHz 0.1 CH SNR 130 135 dBr @1kHz THD + N -100 -95 dB @1kHz, the smaller, the better Frequency response 20 5k Hz @±3dBm Dynamic range 95 100 dB @1kHz Note: Test condition is that using sample rate 48 kHz, NFsCLK factor 512 and resolution 24. Table 4 I2S to I2S
IA9Q5 S83D-E MODULE V3 page - 6 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 5. Electrical Specification Item Min Typ Max Unit Note Power Supply Voltage 3.0 3.3 3.6 V Consumption Current (TX_MODE) 85 100 115 mA 12dBm, continue mode, no GPIO driving Consumption Current (RX_MODE) 60 65 75 mA Receiving only, no GPIO driving Operating Temperature 0 25 55 ℃ Table 5 Item Symbol Parameter Min Typ Max Unit Conditions VIH Input High Threshold 2.0 ─ 3.33 V LDO_OUT=3V VIL Input Low Threshold -0.3 ─ 0.8 V LDO_OUT=3V VOH Output High Threshold 2.4 ─ ─ V LDO_OUT=3V VOL Output Low Threshold ─ ─ 0.4 V LDO_OUT=3V Table 6  Power On Reset Characteristics Symbol Parameter Min Typ Max Unit Conditions VDD_CORE 1.8V POR input 1.62 1.8 1.98 V PORN 1.8V POR output VR18 Rising Detection Level 1.5 V VF18 Falling Detection Level 1.33 1.4 1.47 V TLH18 Rising Delay 2 µS VDD_CORE slew rate = 1V/µS THL18 Falling Delay 2 µS VDD_CORE slew rate = 1V/µS Table 7 Fig 5.1 Power On Reset Timing Chart
IA9Q5 S83D-E MODULE V3 page - 7 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 6. Mechanical Specification 6.1 Without Shielding Case  Dimension：20 * 40 * 6.7 mm  PCB 4 Layers  Mechanical Drawing：  Fig 6.1 Mechanical Drawing of S83D-E Module  Propose 1.27mm Female Header size：H:4.3±0.15mm W:3.0±0.15mm
IA9Q5 S83D-E MODULE V3 page - 8 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 6.2 With Shielding Case  Dimension：20 * 40 * 8.7 mm  PCB 4 Layers  Mechanical Drawing： Fig 6.2 Mechanical Drawing of S83D-E Module with shielding case  Propose 1.27mm Female Header size：H:4.3±0.15mm W:3.0±0.15mm
IA9Q5 S83D-E MODULE V3 page - 9 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw
IA9Q5 S83D-E MODULE V3 page - 10 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw
IA9Q5 S83D-E MODULE V3 page - 11 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 7. Block Diagram Fig 7.1 Block Diagram of IA9Q5 S83D-E Module
IA9Q5 S83D-E MODULE V3 page - 12 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 8. Interface Fig 8.1 Pin sequence of S83D-E Module (Bottom View) Pin Name I/O TX Function Define RX Function Define 1 VCCIO P DC 3.0 ~ 3.6V IN DC 3.0 ~ 3.6V IN 2 DGND P Digital GND Digital GND 3 SPB_I2S_MCLK I/O SPB I2S audio MCLK system clock output SPB I2S audio MCLK system clock output 4 GPIO 32 I/O GPIO AMP MUTE 5 GPIO 14 I/O GPIO GPIO 6 GPIO 31 I/O GPIO GPIO 7 GPIO 17 I/O GPIO GPIO 8 GPIO 36 I/O I2C_BUSY，Module Pull High I2C_BUSY，Module Pull High 9 I2C_CLK I/O I2C Master/Slave clock signal I2C Master/Slave clock signal 10 I2C_DATA I/O I2C Master/Slave data signal I2C Master/Slave data signal 11 DGND P Digital GND Digital GND 12 DGND P Digital GND Digital GND 13 GPIO 27 I/O GPIO Pairing 14 GPIO 21 I/O GPIO GPIO 15 GPIO 16 I/O GPIO ON/OFF 12V 16 GPIO 34 I/O I2S Master/Slave Select I2S Master/Slave Select 17 M_RESET(PORN) I/O Internal power on reset (1) Internal power on reset (1) 18 I2C_CLK I/O I2C Master/Slave clock signal I2C Master/Slave clock signal 19 I2C_DATA I/O I2C Master/Slave data signal I2C Master/Slave data signal 20 GPIO 30 I/O GPIO AMP RESET(L Act) 21 SPA_I2S_DATA I/O I2S DATA 0 SYNC LED 22 SPB_I2S_LRCK I/O SPB I2S audio LRCK SPB I2S audio LRCK 23 DGND P Digital GND Digital GND 24 SPB_I2S_BCK I/O SPB I2S audio BCK SPB I2S audio BCK 25 GPIO 15 I/O GPIO ON/OFF 3.3V 26 SPB_I2S_DATA I/O SPB I2S audio Data SPB I2S audio Data Table 8 IO Function Define Note : (1) *.Not need external RC circuit to do RC reset *.Power On Reset Characteristics can reference section 5 Electrical Specification (page 6) *.External controller can direct control M_RESET but should assign the control IO as input for normal operation and output low to Reset S83D-E Module
IA9Q5 S83D-E MODULE V3 page - 13 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 9. Design Reference 9.1 ADC/DAC Reference Design Fig 9.1 ADC reference design circuit Fig 9.2 DAC reference design circuit
IA9Q5 S83D-E MODULE V3 page - 14 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 9.2 I2S Timing Chart LRCKBCKSDATA Fig 9.3 I2S timing chart Symbol Parameter Min Typ Max Unit tBLR BCK rising to LRCK edge 60 ns tLRB LRCK edge to BCK rise 60 ns tSDS SDATA setup time 60 ns tSDH SDATA hold time 60 ns Table 9
IA9Q5 S83D-E MODULE V3 page - 15 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 10. Antenna Application 10.1 Suggested Clear Area The recommended antenna clearance for embedded PCB antennas are shown below. Note that this clearance should be maintained when mounting the module on a motherboard. Unit : mm Do not place any copper, metal or even PCB in the area marked with cross lines. Fig 10.1 Antenna Clearance Recommendations from Top and Side View
IA9Q5 S83D-E MODULE V3 page - 16 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 10.2 Antenna Drawing 10.3 Antenna Pattern
IA9Q5 S83D-E MODULE V3 page - 17 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw
IA9Q5 S83D-E MODULE V3 page - 18 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw
IA9Q5 S83D-E MODULE V3 page - 19 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw Max Antenna Gain：2.85 dBi
IA9Q5 S83D-E MODULE V3 page - 20 - SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 11. Ordering Information Note: Model Name is the abbreviation of Feature column which is written in bold. For example P is the abbreviation of PCB antenna Table 10 12. Revision History Date Revision Descriptions 2017/07/13 0.1 First release 2017/08/15 0.2 Add Mechanical picture Table 11
The frequency block is 5725Mhz~5850MHzOperating Temperature:0°~55°COutput power: 13.5dBmThe device is restricted to indoor use when operated in the European Community using frequencyin 5725Mhz~5850MHz to reduce the potential for interference.Restriction in BE, BG, CZ, DK, DE, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL,AT, PL, PT, RO, SI, SK, FI, SE, UK.RF exposure statementRF exposure information: The Maximum Permissible Exposure (MPE) level has been calculatedbased on a distance of d=20cm between the device and the human body. To maintain compliancewith RF exposure requirement, use product that maintain a 20cm distance between the deviceand human body.Declaration of ConformityHereby, SYNCOMM TECHNOLOGY CORP declares that the radio equipment type RF 5G WirelessModule is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address:http://www.syncomm.com.tw/index.php/sc/2013-07-31-08-36-54-2
FCC Statement15.191. This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may causeundesired operation.15.21Note: The grantee is not responsible for any changes or modifications not expressly approved bythe party responsible for compliance. Such modifications could void the user’s authority tooperate the equipment.15.105(b)NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-Consult the dealer or an experienced radio/TV technician for helpRF Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance of 20 cmbetween the radiator and your body.FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTSThe RF 5G WirelessModule complies with Part 15 of the United States of America FCC rules and regulations. The Original Equipment Manufacturer (OEM) must comply with the FCC certification requirements.15.21 Any changes or modifications made to the module without the manufacturer’s approvalcould void the user’s authority to operate the module.
ORIGINALEQUIPMENTMANUFACTURER(OEM)NOTES TheOEMmustcertifythefinalendproducttocomplywithunintentionalradiators(FCCSections15.107and15.109)beforedeclaringcomplianceofthefinalproducttoPart15oftheFCCrulesandregulations.IntegrationintodevicesthataredirectlyorindirectlyconnectedtoAClinesmustaddwithClassIIPermissiveChange. TheOEMmustcomplywiththeFCClabelingrequirements.Ifthemodule’slabelisnotvisiblewheninstalled,thenanadditionalpermanentlabelmustbeappliedontheoutsideofthefinishedproductwhichstates:“ContainstransmittermoduleFCCID:PJH-IA9Q5S83D-E”.Additionally, thefollowingstatementshouldbeincludedonthelabelandinthefinalproduct’susermanual:“ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterferences,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.” This Module is full modular approval, it is limited to OEM installation ONLY. 

Navigation menu