Suunto 21161 Diving computer with BT4.0 and LF communication ability User Manual Suunto EON QG 20131113b ai

Suunto Oy Diving computer with BT4.0 and LF communication ability Suunto EON QG 20131113b ai

Contents

User Manual 02

SUUNTO EONQUICK GUIDEen1. Wake up the device by keeping any buttonpressed.1. GET STARTED2. Set up the device. When ready, the devicegoes to the default Surface mode.2. CONNECT1. 4. SET DIVE GAS(ES)2.3. SET DIVE SETTINGS3.After updating and personalizing yourdevice, disconnect it when fully charged.2. Download and install DM4 software.PARTS(1) Suunto EON(2) Protective boot(3) USB cable(4) Bungee adapter(1)(4)(2)1. Connect and charge your device. Ensuredevice is fully charged before first dive.NAVIGATE WITHIN VIEWS ENTER / BACK / EXIT MENU1. In Menu, select Gases. 2. Select the gas according to your dive plan. Select New gas if your mix is not in the list. NOTE: If a device software update is available, it is dowloaded and installed automatically. BATTERY LIFE 1. Keep middle button pressed to access Menu.3. When settings are ready, keep middle buttonpressed to go back and exit.2. Scroll with upper button and selectDive settings with middle button. WARNING: Download and read complete User Guide before divingwww.suunto.com/support5. PAIR TANK POD1. Install Tank POD and open tank valve.3. Wait for green LED on Tank POD to flash.2. Hold your device close to the Tank POD.PROTOwww.movescount.com/dm4www.movescount.com/dm42s2sMenuGasesActive gasesAirMenuDive settingsMenu Dive settings2s16:30Mon 20.9.2s16:30Mon 20.9.(3)35h= max dive timePaired with current active gasPairing failedDive settings Dive modes Parameters Dive enablersDevice settings Tank transmittersSet gas*Dive alarms Gases General menu Dive summaryCompass Safety stop Set points**Customization About my EONAll dives Previous dive *** [Select gas to edit/remove > add gas] if Multiple gases is enabled. (XX)If CCR is enabled.My dives 19:36depth, mdive time00’Surface ModeDive Mode48°depth, mdive time0075’no decodepth, mdive time18.212’48°depth, mdive time18.212’19:36depth, mdive time00’NOTE: To use advanced features such as multigas or helium, activate enablers through general settings. See User Guide for more details.FCCThis device complies with part 15 of theFCC Rules. Operation is subject to the followingtwo conditions: (1) This device maynot cause harmful interference, and (2) thisdevice must accept any interference received,including interference that maycause undesired operation.IC:This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subjectto the following two conditions: (1) this device may not cause interference, and (2) this devicemust accept any interference, including interference that may cause undesired operation of thedevice.

Navigation menu