Suprema XSM Smart IP Access Terminal (XSM) User Manual

Suprema Inc. Smart IP Access Terminal (XSM)

Users Manual

X-StationSmart IPAccess TerminalUser Guide7FSwww.supremainc.com
Contents22RS485 Connection to Secure I/O or Other Terminals 21Relay Connection - Fail Safe Lock …………………… 22Relay Connection - Fail Secure Lock ………………… 23Relay Connection – Automatic Door ………………… 24TTL Switch Connection………………………………… 25Wiegand Input ………………………………………… 26Wiegand Output ………………………………………… 26System Setup ……………………………………… 27Independent Version …………………………………… 27Secure Version (Secure I/O)…………………………… 27Network Setup ………………………………………… 28Chapter 3. User Functions ………………… 29Access Authorization ……………………………… 29Card Authorization ……………………………………… 29Use of Card+Face Detection ………………………… 29Use of Card+Password Authorization………………… 30Use of Card+Password+Face Detection Authorization 30Use of ID+Password Authorization …………………… 31Use of ID+Password+Face Detection Authorization… 31Use of T&A Authorization ………………………… 32T&A Authorization in Auth Mode ……………………… 32T&A Mode ……………………………………………… 34Extra T&A Events ……………………………………… 35Singular Entrance /T&A Records Check …………… 35Authorization Failure ……………………………… 36Product Features ……………………………… 4Safety Instructions……………………………… 5Chapter 1. Before use ………………………… 6Package Contents ………………………………… 6Basic Items ………………………………………………… 7Option ……………………………………………………… 8Product Part Description ………………………… 7Name and Function ……………………………………… 7Product Size ……………………………………………… 8Display ……………………………………………… 9Standby Screen …………………………………… 10Authorization Process……………………………… 11CSN/Data Card …………………………………… 12Chapter 2. Product Installation …………… 13Installation ………………………………………… 13Connector/Cable Specifications and Connection 14Connector Specifications ……………………………… 144 Pin Connector ………………………………………… 158 Pin Connector ………………………………………… 153 Pin Connector ………………………………………… 165 Pin Connector ………………………………………… 166 Pin Connector ………………………………………… 17Power Connection ……………………………………… 18Ethernet Connection …………………………………… 19RS485 Connection with the PC ……………………… 20
33Chapter 4. Admin Menu …………………… 37Registering an Admin ………………………………… 37Entering the Admin Menu ……………………………… 39Admin Menu Structure ………………………………… 40User ………………………………………………… 41Registering an User …………………………………… 41Edit User ………………………………………………… 43User Search …………………………………………… 44Checking the Registered User Info …………………… 45Deleting users…………………………………………… 46Registering Data Card (When Using a Data Card) … 48Formatting Data Cards ………………………………… 50Network Setup ……………………………………… 51TCP/IP Setup …………………………………………… 51Server Setup …………………………………………… 52Serial Communication Setup ………………………… 53Task Management ………………………………… 54Mode …………………………………………………… 54T&A Management ……………………………………… 55T&A event ……………………………………………… 56Camera Event…………………………………………… 56Device ……………………………………………… 57Door ……………………………………………………… 57Time Setup ……………………………………………… 59Device Info ……………………………………………… 60Memory Info …………………………………………… 60Calibration ……………………………………………… 61Device Reset …………………………………………… 62Factory Default ………………………………………… 62Display & Sound …………………………………… 63Log Management ………………………………… 65Checking the Log List ………………………………… 65Delete All Logs ………………………………………… 66Check Log Info ………………………………………… 66Chapter 5. Appendix ………………………… 67Product Specifications …………………………… 67Electrical Specification …………………………… 68FCC Rules ………………………………………… 69Font License………………………………………… 70
Product FeaturesThe X-Station adopts the RF card reader function to enable T&A mode and access control. 41$$"3%The X-Station is smart IP-base device with a 3.5 inch color touchscreen LCD and provides a more intuitive User Interface.The X-Station is capable of storing up to 200,000 logs and 5,000 user’s pictures on the device. Furthermore, 1,000,000 normal logs, as well as 5,000 video logs can be stored. The built-in camera enables the user to store video logs and face detection technology.The X-Station can be directly connected to a PC or a server and supports Ethernet and RS485 as real-time interface.The X-Station supports a total of 16 T&A events and provides ‘ID/Card+Password’ identification mode.4
The following instructions ensure your safety and prevent any property damage. Be sure to read the following instructions and use the product correctly.Do not install the terminal in a place affected by direct sunlight, humidity, dust or soot.Do not drop the terminal or subject it to heavy impact.Keep the terminal away from heating products.Do not disassemble, repair or reconstruct the terminal.Do not spill any liquids (water, soda or solution) into the terminal.Keep the product out of reach from children.Keep the terminal away from magnets or anything containing magnetic material such as CRT, TV sets, computer monitors and speaker. Do not apply heavy pressure to the touch screen.Clean the terminal regularly to prevent dust setting on it.In cases of product malfunction or problems, please contact a service center.Use a soft cloth or towel when cleaning the terminal. Do not uses spray water on the terminal.Do not use the terminal for any other purpose than original use.Safety Instructions5
6Please check the product package contains the following items. If any of the following items is damaged or missing, please contact your retailer immediately.X-StationTerminalBracket Cable(5)Screws and holders (2 each)Termination resistor (2 pcs)12V Power AdapterSoftware CDPlastic Stand Card Reader Secure I/OChapter 1. Before usePackage ContentsBasic Items Optional Accessories 6WZYTWXZTW[W[TWFerrite Core
71Before UseChapter 1.7Product Part DescriptionName and FunctionNo Name Function1ProximitySensorTurns on LCD backlight when user gets close to sensor.2Camera Allows to record videos or face detection feature.3LCD screen Displays current status (T&A mode, notice etc.) and the time.4FunctionKeys Uses function keys for the T&A events. 5FR Cardsensor Reads FR card.13452
8Product size: 79mm (W) x 135mm (H) x 21mm (D)Front View BracketProduct Size79mm 50.00mmSide View21mm135mm106.5mm
91Before UseChapter 1.DisplayInputs ID for authenticationEnters additional T&A eventsEnters the admin menuDisplay current time and dateDisplays face detection mode on Displays door statusDisplays Ethernet Connection statusIndicates connection to PC via EthernetIndicates slave device connection status via RS485Clock Displays current timeDescribes F1 to F4 keyWhen users touch the button, it operates same function as F1 to F4 key.
10Standby ScreenLogo Screen AnnouncementScreenTerminal LockedFix T&A mode ScreenAuto T&A mode ScreenSecurity mode On Data Transfer mode
111Before UseChapter 1.Authorization methodsAuthorize with a registered card.Card OnlyPlace a registered card and then, face detection authorization.Card+Face DetectionPlace a registered card, and then enter a password.Card+PasswordAuthorize with Card and password, and then face detection authorization.Card+Password+Face DetectionEnter a registered ID, and then enter a password.ID+PasswordAuthorize with ID and password, and then Face detection authorization. ID+Password+Face DetectionŶRefer to [Chapter 3. User Functions >1.Entrance Authorization] on page 28 for further explanations.Note
CSN/Data Card $4/$BSE Device reads the CSN (Card Serial Number) card which is the own ID of a card. Card authentication will be allowed when the new input CSN card is matched with the registered CSN card.User information including user ID and password is saved into the card if device is set to data mode. Device reads the user information from a card when the new card is input.12%BUB$BSE
Adjusts the wall mount bracket and attach it firmly to the wall.Attaches the product on the wall mount bracket, adjust the product using the screw at the bottom of wall mount bracket.1313Chapter 2. Product InstallationInstallation13132Product InstallationChapter 2.
14Connector/Cable Specifications and ConnectionConnector SpecificationsNo Name Function14 pin connector Ethernet connection28 pin connector RS485 Port 1 (Connection with PC) /RS232 Port (Extension)33 pin connector RS485 Port 2 (Slave device connection) 45 pin connector Power and relay connection56 pin connector Wiegand I/O and TTL Switch12345
152Product InstallationChapter 2.ͩ͢8 pin connector - RS485 port 1 (Connection with PC) / RS232 port (for extension)Pin Pin Desctription Lenngth Cable Type Wire Color1RS232 CTS30cm AWG26PINK2RS232 RTS ORANGE3GND BLACK4RS232 TX PURPLE5RS232 RX GREEN6GND BLACK7RS485 TRX- YELLOW8RS485 TRX+ BLUEͥͩͩ͢͢͢4 pin connector (Ethernet Connection)Pin Pin Desctription Wire Color RJ45 Pin1TX + YELLOW 62TX - GREEN 33RX + RED 24RX - BLACK 1
16ͦ͢Pin Pin Description Length Cable Type Wire Color1 Relay NC30cm AWG24ORANGE2 Relay COM BLUE3 Relay NO WHITE4 GND BLACK5 12VDC RED5 pin connector – Power and relayPin Pin Description Length Cable Type Wire Color1GND30cm AWG26BLACK2RS485 TRX- YELLOW3RS485 TRX+ BLUE3 pin connector - RS485 port 2 (Slave device connection) ͤ͢
172Product InstallationChapter 2.ͧ͢6 pin connector - Wiegand I/O and TTL SwitchPin Pin Description Length Cable Type Wire Color1SW IN130cm AWG26ORANGE2SW IN0 YELLOW3GND BLACK4Wiegand GND BLACK5Wiegand D1 WIHTE6Wiegand D0 GREEN
18Power Connection (5 pin connector)X-Station(5) Power 12V (Red)(4) Power GND (Black)(3) Relay NO (White)(2) Relay COM (Blue)(1) Relay NC (Orange)RELAYUPS(optional)DCPower supplyŶRecommended Power Specification- Voltage 12V ±10%, current 1500mA or above. You should use an authorized IEC/EN 60950-1 12V adapter.- In case of another unit providing power for X-Station, it is recommended you use an adapter for more than 1500mA.Note
192Product InstallationChapter 2.Ethernet Connection (4 pin connector)HUB- After plug the 4 pin cable to the back of the terminal, connect the RJ45 socket of the 4 pin cable with a LAN cable to the hub.
20RS485 Connection with the PC (8 pin connector) Cable shield(optional) TRX+ TRX-GNDRS232-485ConverterPC X-Station(6) GND (Black)(7) 485 TRX- (Yellow)(8) 485 TRX+ (Blue)Termination(6) GND (Black)(7) 485 TRX- (Yellow)(8) 485 TRX+ (Blue)X-StationTerminationŶIn case the signal is not sent correctly, you should install a terminal resistance at both ends of the bus. (120ⳉ resistance)ŶThe signal quality can vary depending on the route, so you need to adjust the transmission speed or lower the transfer rate.Note
212Product InstallationChapter 2.RS485 Connection to Secure I/O or Other Terminals (3 pin connector) X-Station(1) GND (Black)(2) 485 TRX- (Yellow)(3) 485 TRX+ (Blue)TerminationTerminationX-Station(1) GND (Black)(2) 485 TRX- (Yellow)(3) 485 TRX+ (Blue)4FDVSF*0 4FDVSF*0
22Relay Connection - Fail Safe Lock (5 pin connector)(3) Normally Open / N.O (White)(2) Common (Blue)(1) Normally Close /N.C (Orange)X-StationDeadbolt /Door strike DCPower supply
232Product InstallationChapter 2.Relay Connection - Fail Secure Lock (5 pin connector)DCPower supplyX-StationDeadbolt /Door strike(3) Normally Open / N.O (White)(2) Common (Blue)(1) Normally Close /N.C (Orange)
24Relay Connection – Automatic Door (5 pin connector)DoorControllerRTE SwitchAutomatic Door(3) Normally Open / N.O (White)(2) Common (Blue)(1) Normally Close /N.C (Orange)X-StationPresenceDetector
252Product InstallationChapter 2.TTL Switch Connection(6 pin connector)X-StationSWITCHINPUT2SWITCHINPUT1(1) Switch Input 2 (Orange)(2) Switch Input 1 (Yellow)(3) GND (Black)
26Wiegand Input (6 pin connector)(6) Wiegand DATA 0 (Green)Wiegand Output. Data 0Wiegand Output. Data 1GND(5) Wiegand DATA 1 (White)(4) Wiegand GND (Black)X-StationCard ReaderCable Shield (optional)ŶYou can configure the Wiegand Input and Output settings in the BioStar.NoteWiegand Output (6 pin connector)(6) Wiegand DATA 0 (Green)Wiegand Input. Data 0Wiegand Input. Data 1GND(5) Wiegand DATA 1 (White)(4) Wiegand GND (Black)X-StationAccess ControllerCable Shield (optional)
272Product InstallationChapter 2.System Setup1$94UBUJPO&YJU#VUUPO%PPS-PDL%PPS4FOTPS-"/Independent Version Secure Version (Secure I/O)4FDVSF*0341$94UBUJPO &YJU#VUUPO%PPS-PDL%PPS4FOTPS-"/
Network Setup1$1$1$3434344FDVSF*04FDVSF*0-"/1$4FSWFS1$$MJFOU1$$MJFOU&YJU#VUUPO94UBUJPO4MBWF94UBUJPO)PTU94UBUJPO)PTU94UBUJPO94UBUJPO)PTU28
Card Authorization Access AuthorizationCard authorization is only operated in ‘Card Only’ authentication mode or registered ‘Bypass’ card.Use of Card+Face DetectionFace Detection is only operated when Face Detection mode is in ‘Use’.Place the card to the terminal.Keep your face in front of device when the Face Detection mode is on.Authorization success screen will pop up on the screen.Place the card to the terminal.Authorization success screen will pop up on the screen.NoteŶFace Detection MethodWhen the face detection mode is on, please fit your face in the frame. Chapter 3. User Functions29293User FunctionsChapter 3.NoteŶThe default screen will appear when authorization success. - If a user image is registered: The registered user image will be shown on screen. - If no user image is registered: The recorded image will be shown. Should the video log not be recording, the default image will be displayed on the authorization screen.
30Use of Card+Password AuthorizationTo use password authorization, use Auth Mode with the ‘ID/Card+Password’ setup.Place the card to the terminal.Enter the password and press [OK].Authorization success screen will pop up on the screen.Use of Card+Password+Face Detection AuthorizationPlace the card to the terminal.Enter the password and press [OK].Capture your face image when the Face Detection screen appears.Authorization success screen will pop up on the screen.
313User FunctionsChapter 3.Use of ID+Password AuthorizationTo use password authorization, use Auth Mode with the ‘ID/Card+Password’ setup.Press [Input ID] on the main screen.Enter your ID on the ID screen and then press [OK].Enter your password and then press [OK].Use of ID+Password+Face Detection AuthorizationPress [Input ID] on the main screen.Enter your password and then press [OK].Capture your face image when the Face Detection screen appears.Authorization success screen will pop up on the screen.Authorizationsuccess screen will pop up on the screen.Enter your ID on the ID screen and then press [OK].
32Use of T&A AuthorizationT&A Authorization in Auth ModePress F1 to F4 for T&A events.Place the card to the terminal when the Card/ID input screen appears.Authorization success screen will pop up on the screen. At the same time the T&A event is applied."VUIPSJ[BUJPOPOMZCZDBSENoteŶYou can use Face Detection mode with T&A mode. When the Face Detection mode is activated, you have to successfully authorize card and face to enter.
333User FunctionsChapter 3.Press F1 to F4 for each of the T&A events.Place the card to the terminal.Press F1 to F4 for each of the T&A events.Press [Input ID]. Enter your password and then press [OK].Authorization success screen will pop up on the screen. At the same time the T&A event is applied.Enter your password and then press [OK].Authorization success screen will pop up on the screen. At the same time the T&A event is applied.Enter your ID on the ID screen and then press [OK].*%$BSE1BTTXPSE"VUIPSJ[BUJPO*%1BTTXPSE"VUIPSJ[BUJPO
34T&A ModeIf you set up the T&A mode to [Manual], users must press the F1 to F4 key every time you enter or leave to record T&A events.If you set up the T&A mode to [Manual Fix], the device will remain in the previous T&A events until a different T&A key is pressed.If you set the T&A mode to [Disabled], device is disable the T&A function and only operate access control function. If you set up the T&A mode to [Auto], users do not have to select a T&A event. The device will automatically change T&A events to correspond with the functions specified for a time period. Users can select different T&A events by pressing the function key. If you set up the T&A mode to [Fixed], the device will perform only the specified T&A events. User is not able to select a different T&A key. *User can change automatic time period and T&A event in the BioStar.
353User FunctionsChapter 3.Extra T&A EventsExtra T&A events screen.Singular Entrance /T&A Records CheckSelect [Config] on the main screen.Place your card to the terminal and press [Input ID].If the authorization was successful, you can check your access/T&A records.Press [T&A] on the main screen to select extra T&A events.ⶮ#BTJD5"FWFOUT'_'Ɣ*O"SSJWFBUXPSLƔ0VU-FBWFBGUFSXPSLƔ*O%VUZ3FUVSOEVSJOHXPSLƔ0VU%VUZ-FBWFUFNQPSBSJMZEVSJOHXPSL:PVDBODIBOHFUIFCBTJD5"FWFOUTⶮ&YUSB5"FWFOUT:PVDBOTFUUIFFYUSB5"FWFOUTCFTJEFTPGCBTJD5"FWFOUT:PVDBODSFBUFVQUP5"FWFOUTJOUIF#JP4UBS&YBNQMF"SSJWJOHBUXPSLBGUFSPGGTJUFXPSLMFBWJOHXPSLBGUFSPGGTJUFXPSLSFUVSOJOHBGUFSPGGTJUFXPSLNPSOJOHCSFBLBGUFSOPPOCSFBL
Authorization FailureAuth Mode setting does not match.Authorizationinterval was invalid.The number of authorizations was exceeded.User is not in the authorization group.The anti-passback is limited.Unregistered user or the card data is not store on the card.Input wrong password.36
Registering an AdminThere is no registered user data in the new product. Please register the administrator immediately after the first installation. The Admin enables to add/delete user, and configure device setting.Press [Config] on the main screen.Select [Enroll User].Select [User]. Check the [Admin] box if you want to enter an Admin.Input DataTouch the picture to enter personal data. The data will be used when authorization is successful. The picture can be saved with BioStar.Enter a password. Enter the name. (You can only use English characters) Place the card to the reader. The card ID will read and register the card data.Enter the user ID.The user ID can be created numbers 1 to 4294967295.User ID Card ID Name Password FaceChapter 4. Admin Menu3737374Admin MenuChapter 4.
38ŶSince anyone can use the Admin Menu if no Admin is registered, you must register an Admin first.Waring͒NoteRegistering an Admin (continued)Set up a [Bypass Card] if you need one.Set up a Private Auth and Access Group if you need them.Enroll success screen will pop up on the screen.Press [Add] to finish the Admin registration.ŶUsers who are registered with a ‘Bypass Card’ will be authorized by bypass regardless of the Auth Mode.Users who are registered with the ‘Private Auth mode’ will have priority in the terminal’s Auth mode and be authorized in Private Auth.The ‘Access Group’ determines whether a user can enter or not. You can select an Access Group within the BioStar software for the relevant terminal.NoteŶYou have to enter either card or password to make a registration.The T&A button on the lower part of the screen has the same function as the F1~F4 keys.Instead of pressing [Prev]/[Home], you can also use F3/F4.
394Admin MenuChapter 4.Entering the Admin MenuPress [Config] on the main screen.The Admin Menu will appear on screen.Enter the password if necessary and press [OK].The Admin Menu will appear.Enter your card or ID.
40%BUB$BSE$4/$BSE"ENJO.FOV6TFS/FUXPSL.PEF%JTQMBZ%FWJDF&OSPMM6TFS&OSPMM6TFS*OGP%FMFUF"MM6TFS&EJU6TFS4FBSDI&EJU6TFS*OGP%FMFUF6TFS4FBSDICZ*%4FBSDICZ/BNF4FBSDICZ$4/6TFS*%$BSE*%/BNF1BTTXBSE-FWFM#ZQBTT$BSE1SJWBUF"VUI(SPVQ_&OSPMM%BUB$BSE'PSNBU%BUB$BSE6TFS*%/BNF1BTTXBSE-FWFM#ZQBTT$BSE(SPVQ_5$1*14FSJBM4FSWFS6TFS5$1*11PSU.BY$POO%)$1*1"EESFTT(BUFXBZ4VCOFU#BVESBUF4FSJBM.PEF4FSWFS4FSWFS*11PSU0QFSBUJPO5"5"&WFOU$BNFSB&WFOU%PPS5JNF%FWJDF*OGP$BMJCSBUJPO.FNPSZ*OGP3FTFU'BDUPSZ%FGBVMU$BSE0OMZ*%$BSE1*/'BDF%FUFDUJPO%VBM$BSE.PEF4FSWFS.BUDIJOH.BUDIJOH5JNFPVU1SJWBUF"VUI5IFNF#BDLHSPVOE5JNFPVU.TH5JNF#BDLMJHIU5JNFPVU7PMVNF-BOHVBHF5JNF%BUF%JTQMBZ3FMBZ%SJWFOCZ%VSBUJPOTFD35&*OQVU5ZQF%PPS4FOTPS*OQVU5ZQF)FME0QFO6OMPDL5ZQF-PDL5JNF.BOVBM"VUP.BOVBM'JY'JYFE%JTBCMFE%BUF5JNF5JNF4ZOD-PHMJTU%FMFUF-PH*OGP-PHAdmin Menu Structure
414Admin MenuChapter 4.UserRegistering an UserRegistration at the Terminal (when using a CSN Card)If you use a CSN Card, select CSN Card under [Mode>Task>Card mode].Press [Config] on the main screen.Select [Enroll User].Select [User]. Do not check the box [Admin] when registering a user.Enter the user ID. The user ID can be created numbers 1 to 4294967295.Enter the name. (You can only use English characters)Place the card to the reader. The card ID will read and register the card data.Record a face and press [OK]. The face will appear each time authorization was successful.
42Registering an User (continued)Enter the password. Setup [Bypass Card] option, press [Ļ] in the bottom of the screen.Setup [Private Auth] mode and [Access Group] ,press [Add] or F4.Enroll success screen will pop up on the screen.ŶUsers who are registered with a ‘Bypass Card’ will be authorized by bypass regardless of the Auth Mode.Users who are registered with the ‘Private Auth mode’ will have priority in the terminal’s Auth mode and be authorized in Private Auth.The ‘Access Group’ determines whether a user can enter or not. You can select an Access Group within the BioStar software for the relevant terminal.Note
434Admin MenuChapter 4.Edit UserSelect [User]. Select the user from the user list.Select [Edit User]. Press [Add] or F4 after changing the user data.ŶIf you check the right hand box in the user list and press [Delete], you can delete the selected user.NoteEnroll success screen will pop up on the screen.
44User SearchSelect [User]. Select [Search by ID] and press [OK].Select [Search]. Enter the ID number and press [OK]. The corresponding ID search results will appear.Search by User IDSearch by NameSelect [User]. Select [Search by Name] and press [OK].Select [Search]. Enter the name and press [OK]. The corresponding usernamesstarting with those letters will appear.
454Admin MenuChapter 4.Checking the Registered User InfoPress [OK] to return to the previous screen.Select [User]. Select [Enrolled user Info].ŶYou can register a maximum of 200,000 users.You can save up to 5,000 user images.NoteSelect [User]. Select [Search by CNS] and press [OK].Select [Search]. Place the CSN Card to the card reader. The search results will be shown in the window.Searching by CSN Card
46Enter the user ID to be deleted and press [OK].Select [User]. Check the box next to the user to be deleted. Press [Delete] in the lower corner, or F4.Select [Search]. By pressing [OK] the selected user will be deleted.Check the box next to the users to be deleted. Press [Delete] in the lower corner, or F4.Select [User]. By pressing [OK] the selected users will be deleted.Select [Edit User].Deleting one userDeleting several usersŶYou cannot restore user data that is not stored in the BioStar database.Attention͒
474Admin MenuChapter 4.Select [User]. Click [Delete All Users].Press [OK] in the Delete window to erase all user data from the terminal.ŶYou cannot restore user data that is not stored in the BioStar database.Attention͒Delete All Users
48Registering Data Card (When Using a Data Card)If you use a Data Card, go to [Mode>Operation>Card Mode] and select Data Card.If a Data Card is used, the user data will not be saved on the terminal and you need to manage the user data separately.Select [Enroll Data Card].Press [Config] on the main screen.Enter the user data when the input screen appears.Select [User].Enter the password.Enter user ID. Select [Admin] if necessary.Enter the name. (You can only enter Latin letters.)
494Admin MenuChapter 4.User Registration (continued)Place the card to the reader.Set up a [Bypass Card] and an Access Group if needed.Data card enroll success screen will pop up on the screen.After entering all user data, press [Add].ŶUsers who are registered with a ‘Bypass Card’ will be authorized by bypass regardless of the Auth Mode.The ‘Access Group’ determines whether a user can enter or not. You can select an Access Group within the BioStar software for the relevant terminal.NoteŶ You cannot use CSN Card and Data Card at the same time.Attention͒
50Formatting Data CardsPlace the Data Card to the reader.Select [User]. Format success screen will pop up on the screen.Select [Format Data Card].All saved data on Data Cards will be deleted.
514Admin MenuChapter 4.TCP/IP SetupEnable to setup TCP/IP for connecting the terminal and BioStar.Select [TCP/IP]. Enter port and IP Address, etc., press [Ļ] to move to the next screen.PPress [Prev] or [Home] after finishing the setup and the changes will be activated.Ɣ Use TCP/IP: Sets up the use of TCP/IP. If you use Ethernet with Zone, TCP/IP has to always have the setting ‘USE’. Ɣ Port: Assigns the terminal TCP/IP port. The default value is ‘1470’.Ɣ Max Conn.: Sets the number of BioStar that can be connected to the terminal. (Set value: 1,4,6,8 and 16)Ɣ DHCP: Sets whether or not to use DHCP protocol (Set values; Enabled / Disabled). ƔIP Address: Enter the IP address when adopting a fixed IP instead of DHCP protocol. Ask your network administrator for the IP address. The default value is 127.0.0.1.ƔGateway: Enter the gateway address when adopting a fixed IP instead of DHCP protocol. Ask your network administrator for the address.ƔSubnet: Enter the Subnet Mask address when adopting a fixed IP instead of DHCP protocol, Ask your network administrator for the address.Network Setup
52Server SetupThe terminal enables to communicate with BioStar server or SDK application server. Configure the IP address and ports of the server to connect to the terminal.Select [Server]. Setup the use of server, IP, and port press [Prev] or [Home] to activate the settings.ƔServer: Set up the use of the server.ƔServer IP: Enter the server IP. ƔPort: Enter the server port.
534Admin MenuChapter 4.Serial Communication SetupSet the serial communication. The serial communication uses RS485 and can be connected with the PC or SIO.Select [Serial]. Set up RS485-PC, and RS485-NET.ƔRS485-PC: Set the network speed between the terminal and a PC in RS485 communication. (Set values: 9600/19200/57600/115200)ƔRS485-NET: Set the communication with Secure I/O and other terminals. (Set value: Disabled, Net-Slave, Net-Host)RS485 mode enables to communicate between a server terminal and up to 7 salve terminals. - Net-Host: Sets the terminal as host. - Net-Slave: Sets the terminal as slave.
54Task ManagementModeSelect [Mode]. Press [Operation]. Set up Auth Mode, Face Detection, Card Mode, etc.ƔCard Only: Users input only cards for authentication. In this mode, the card type must be select on the [Card Mode]. (Set values: Always/No Time)ƔID/Card+Password: Users input ID/Card and Password consecutively for authentication.ƔFace Detection: Set the Face Detection mode. If it is activated, you have to successfully pass Face Detection after you enter your card or password to gain authorization. (Settings: Always/ No Time)ƔDual: Dual Authentication needs consecutive authentications from two different users within 15 seconds for high security. After 15 seconds, the first authorization will become invalid and you have to do both authorizations over again. (Settings: Always/Never)Attention͒ŶIf device setting is [Card Only] - [No Time] and [ID/Card+ password] - [No Time] at the same time, users can only authorize by Bypass Card.(You cannot enter the Admin Menu with authorization with ID/Card.>You have to register a Bypass Card when registering user.
554Admin MenuChapter 4.T&A ManagementYou can set up a T&A for the terminal.Select [T&A]. Select [T&A]. Press [OK] after selecting a T&A mode.ŶRefer to the detail T&A mode [Chapter 3.User Functions >2.T&A Authorization>T&A mode] for details. (page 33)NoteCard Mode: Set the card type used on the terminal. (Settings: Use CSN/Use Data Card/Not Use) -CSN Card: After the terminal reads the card’s id number and saves it, every time the terminal compares the card id number successfully with the saved number, authorization will be granted. -Data Card: The user ID and other data will be saved on the card, and if the card is touched to the terminal, it will read the card’s data.ƔServer Matching: enable this setting to perform card ID matching at the BioStar server, instead of the device. When this mode is enabled, the devices will send the card ID to the server to verify a match. This mode is useful when you have more users than can be downloaded to a device or user’s information cannot be distributed due to security concerns.ƔMatching timeout: Sets up the waiting time for Server Matching and Face Detection. (Settings: 5sec/10sec/15sec/20sec/30sec)In case there is no answer from the server during Matching Time or the face cannot be detected, the authorization will fail.Ɣ Individual Auth Mode: Sets up individual Auth Modes.Mode (Continue)
56T&A eventYou can check automatic time and activation for T&A events with F1~F4 or the T&A event button (EXT 01~12) through BioStar. T&A events can only be set up through BioStar. On the terminal, the events can only be checked.Select [T&A event]. Use [ź]/ [Ÿ] to check the settings on BioStar.Camera EventIn case of a Camera Event, the camera will start recording when the event begins and then save the video log. You can only set up Camera Events through BioStar. On the terminal, the events can only be checked.Select [Camera Event]. Here you can check the camera event.
574Admin MenuChapter 4.DeviceDoorPress [Device]. Press [Door]. Enter the settings.ƔRelay: Select replay to open the door on authentication. (Settings: Not Use/Internal Relay/External Relay 0/External Relay 1/SIO0 Relay0/SIO0 Relay1/SIO1 Relay0/SIO1 Relay1/SIO2 Relay0/SIO2 Relay1/SIO3 Relay0/SIO3 Relay1)ƔDriven by: select type of event that associated devices will activate the trigger to open the door (Settings: All events/Auth/T&A/Auth+T&A/T&A event/Disabled)- All events: associated devices will open the door on any successful authorization events.- Auth: associated devices will open the door only on successful credential authorization events.- T&A: associated devices will open the door only on successful T&A authorization events.
58 - Auth+T&A: associated devices will open the door on successful T&A or credential authorization events or T&A authorization event. - Disabled: associated devices will not open the door, regardless of the attempted authorization events.ƔDuration(sec): Sets up the time for which the relay keeps the door open after an event. The relay will close the door again after the time has elapsed.ƔRTE: Sets up the input time for the door switch. (Set values: Not Use/Input0/Input1/SIO0 Input0/ SIO0 Input1/ SIO0 Input2/ SIO0 Input3/ SIO1 Input0/ SIO1 Input1/ SIO1 Input2/ SIO1 Input3/ SIO2 Input0/ SIO2 Input1/ SIO2 Input2/ SIO2 Input3/ SIO3 Input0/ SIO3 Input1/ SIO3 Input2/ SIO3 Input3)ƔDoor Sensor: set the detection mechanism for door opening. (Settings: Not Use/Input0/Input1/SIO0 Input0~3/ SIO1 Input0~3/ SIO2 Input0~3/ SIO3 Input0~3)Ɣ Input Type: select the door open switch’s operation mode. (Set values: N/O, N/C)Ɣ Held Open: set the duration of time for the alarm to go off after the door opens.ƔUnlock Time: set the time to keep the door forcibly locked. (Set values: Always/No time)- The unlock time can only be set up in BioStar. The unlock time for the terminal can be selected from the time frame set up by BioStar on the terminal.ƔLock Time: set the time to keep the door forcibly open. (Settings: Always/No time)- During lock time, only the Admin and no normal users can enter. The lock Time can only be set up in BioStar. The lock time for the terminal can be selected from a time frame set up by BioStar on the terminal.Door (Continue)
594Admin MenuChapter 4.Time SetupYou can set up the time that appears on the terminal. You have to set up the time to receive accurate log data.Press [Device]. Press [Time].Ɣ Date: Enter the current date. Use ( YYYYMMDD) (+)/(-) to enter the date.Ɣ Time: Enter the current time. Use ( hh:mm:ss) (+)/(-) to enter the time.ƔTime Sync: You can use Time Sync in the server mode. The terminal’s time will be synchronized with the server time. The time will be adjusted once every hour and only if the time difference between terminal and server more than 5 seconds.Set up data, time, and time sync.
60Device InfoPress [Device]. Select [Device Info]. Check device ID, FW version, etc.Memory InfoPress [Device]. Select [Memory Info.]. Check the present status of the terminal’s memory.
614Admin MenuChapter 4.CalibrationPress [Device]. Select [Calibration]. Press the cross that appears on the screen. If the cross moves, follow it on the screen. As soon as calibration is finished, the cross will disappear.Calibrationsuccess screen will pop up on the screen.
62Device ResetPress [Device]. Select [Reset]. Press [OK] to restart the terminal.Factory DefaultPress [Device]. Press [Ļ] in the lower part of the display to move to the next screen.Select [Factory Default].Press [OK] to reset all settings to factory default value.ŶPlease be aware that the factory default setting means that all wallpapers, sound effects, notices, etc. you have downloaded from BioStar will be deleted. However, even if you execute factory default the registered user data and log data will not be deleted.Waring͒
634Admin MenuChapter 4.Display & SoundClick [Display]. Enter theme, volume, etc.ƔTheme: Select a theme for the screen background.(Selection: Theme 1/Theme 2/Theme 3)
64ŶIf ‘Notice’ and ‘Slide Show’ are selected, either of these two will appear after authorizations are completed and the menu timeout time has passed. In the ‘Notice’ or ‘Slide Show’ status, the LCD backlight comes back on (should it be turned off) as soon as the screen is touched. If the LCD backlight is already on, the screen will change back to the logo screen.NoteƔBackground: Select a background for the standby screen.(Selection: Logo/Notice/Slide Show)ƔTimeout: If no key is pressed during the allotted timeframe, the display returns to main screen.(Selection: 10sec/20sec/30sec/Infinite)ƔMsg Time: Select how long the message will be displayed on the screen during authorization. (Selection: 0.5 sec/1 sec/2sec/3sec/4sec/5sec)ƔBacklight Timeout: If no key is pressed during the allotted timeframe, the LCD backlight will turn off.(Selection: 10sec/20sec/30sec /40sec/50sec/60sec/Infinite)Ɣ Volume: Select volume of the sound effects. 0% means that no sound will be emitted. (Selection: 0~100%)ƔLanguage: Select the language displayed on the terminal. (Selection: Korean/English/Custom)-You have to reboot the terminal to activate language changes.Ɣ Time: Select whether the time and date will be displayed on the standby screen.Ɣ Date Display: Select the date format.Display (Continue)
654Admin MenuChapter 4.Log ManagementChecking the Log ListYou can check the terminal’s normal log and the video log records.Checking the Normal LogClick [Log]. Select [Log List]. Click on a savedlog record. You can check a normal log by clicking on the log item. Checking the Video LogClick [Log]. Select [Log List]. Here you can see the saved log records. If you click on log items with , you can see the video log.
Delete All LogsClick [Log]. Select [Delete]. If you click [OK], all saved logs will be deleted.Delete success screen will pop up on the screen.Check Log InfoŶDevice enables to store up to maximum of 1,000,000 normal logs and 5,000 video logs.NoteClick [Log]. Select [Log Info.]. Here you can check the logs that are presently saved on the terminal. Click [OK] to return to the previous screen.66
Product Specifications67Item SpecificationsCard Options 13.56 MHz ISO 14443 A/B (MIFARE)Capacity Max. User 200,000Log Capacity 1,000,000InterfacesCommunication Interfaces TCP/IPRS485 x 2chWiegand IN & OUTTTL I/O 2 inputsBuilt-in Relay 1HardwareCPU 667MHz RISC x 1Memory 1GB flash + 256MB RAMLCD Display 3.5” color touch screenSound Indication 16-bit Hi-Fi soundOperating Temperature -10Ⳅ ~ 50ⳄHumidity 90%Tamper SwitchOperating Voltage 12V DCDimensions 79mm(W) x 135mm(H) x 21mm(D)Chapter 5. Appendix67675AppendixChapter 5.
68Electrical SpecificationMin. Value Mean Value Max. Value NotePowerVoltage (V) 10.8 12 13.2 Use regulated DC power adaptor only.Current (mA) - 1500Switch InputVIH (V) - TBD -VIL (V) - TBDPull-up resistance (ⳉ)- 4.7K - The input ports are pulled up with 4.7 KⳉresistorsWiegand OutputVOH (V) -5 -VOL (V) - 0.8 -Pull-up resistance (ⳉ)- 4.7K -RelaySwitching capacity (A) -- 20.330V DC125V ACSwitching power (resistive) -- 30W37.5VADCACSwitching voltage (V) -- 220250DCAC
695AppendixChapter 5.FCC RulesCautionChanges or modifications not expressly approved by the manufacturer responsible for compliance could void the user˅sauthority to operate the equipment. WarningThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interface, and (2) this device must accept any interface received, including interference that may cause undesired operation.Information to UserThis equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, user and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more the following measures:1. Reorient / Relocate the receiving antenna.2. Increase the separation between the eq uipment and receiver.3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help
70Copyright (c) 2010, NHN Corporation (http://www.nhncorp.com), with Reserved Font Name Nanum, Naver Nanum, NanumGothic, Naver NanumGothic, NanumMyeongjo, Naver NanumMyeongjoThis Font Software is licensed under the SIL Open Font License, Version 1.1.This license is copied below, and is also available with a FAQ at: http://scripts.sil.org/OFLSIL OPEN FONT LICENSEVersion 1.1 - 26 February 2007PREAMBLEThe goals of the Open Font License (OFL) are to stimulate worldwide development of collaborative font projects, to support the font creation efforts of academic and linguistic communities, and to provide a free and open framework in which fonts may be shared and improved in partnership with others.The OFL allows the licensed fonts to be used, studied, modified and redistributed freely as long as they are not sold by themselves.The fonts, including any derivative works, can be bundled, embedded, redistributed and/or sold with any software provided that any reserved names are not used by derivative works. The fonts and derivatives, however, cannot be released under any other type of license.The requirement for fonts to remain under this license does not apply to any document created using the fonts or their derivatives.Font License
715AppendixChapter 5.DEFINITIONSˈFont Softwareˉ refers to the set of files released by the Copyright Holder(s) under this license and clearly marked as such. This may include source files, build scripts and documentation.GˈReserved Font Nameˉ refers to any names specified as such after the copyright statement(s).ˈOriginal VersionˉGrefers to the collection of Font Software components as distributed by the Copyright Holder(s).GˈModified Versionˉ refers to any derivative made by adding to, deleting, or substituting ? in part or in whole ? any of the components of the Original Version, by changing formats or by porting the Font Software to a new environment.ˈAuthorˉ refers to any designer, engineer, programmer, technical writer or other person who contributed to the Font Software.PERMISSION & CONDITIONSPermission is hereby granted, free of charge, to any person obtaining a copy of the Font Software, to use, study, copy, merge, embed, modify, redistribute, and sell modified and unmodified copies of the Font Software, subject to the following conditions:1) Neither the Font Software nor any of its individual components, in Original or Modified Versions, may be sold by itself.2) Original or Modified Versions of the Font Software may be bundled, redistributed and/or sold with any software, provided that each copy contains the above copyright notice and this license. These can be included either as stand-alone text files, human-readable headers or in the appropriate machine-readable metadata fields within text or binary files as long as those fields can be easily viewed by the user.3) No Modified Version of the Font Software may use the Reserved Font Name(s) unless explicit written permission is granted by the corresponding Copyright Holder. This restriction only applies to the primary font name as presented to the users4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font Software shall not be used to promote, endorse or advertise any Modified Version, except to acknowledge the contribution(s) of the Copyright Holder(s) and the Author(s) or with their explicit written permission.5) The Font Software, modified or unmodified, in part or in whole, must be distributed entirely under this license, and must not be distributed under any other license. The requirement for fonts to remain under this license does not apply to any document created using the Font Software.
TERMINATIONThis license becomes null and void if any of the above conditions are not met.DISCLAIMERTHE FONT SOFTWARE IS PROVIDED ˈAS ISˉ, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWAREOR FROM OTHER DEALINGS IN THE FONT SOFTWARE.72
'1BSLWJFX0GGJDF5PXFSKFPOHKBEPOH#VOEBOHHV4FPOHOBN(ZFPOHHJ,PSFB5&-'"90OMJOF$VTUPNFS4VQQPSUTVQQPSU!TVQSFNBJODDPN$PNQBOZ8FCTJUFXXXTVQSFNBJODDPN4VQSFNB*ODThe specifications and functions of X-station are subject to change without prior notice for continuous function orquality improvement. For more information on the product, contact Suprema Inc.

Navigation menu