Suprema BST2ROC Fingerprint Terminal BioStation T2 User Manual

Suprema Inc. Fingerprint Terminal BioStation T2 Users Manual

Users Manual

www.suprema.co.krInnovative Fingerprint TerminalInstallation Guide(ver0.1)BioStationT2
2ⒸCopyright 2010Suprema Inc.Product ContentsnBasic ContentsProduct ContentsTerminal Wall mounting metal bracketWallmounting screwsand holders-4 eaScrew for fixing main bodyCablesSoftware CD 12V DC AdaptorFerrite Core
3ⒸCopyright 2010Suprema Inc.Product ContentsnOptional accessoriesUSB fingerprint scanner for enrollmenton PCWireless LAN Access Point
4ⒸCopyright 2010Suprema Inc.Cable and Connector PinoutRelayRS485PIN PIN DESCRIPTION1NORMAL OPEN2COMMON3NORMAL CLOSEPIN PIN DESCRIPTION1TRX -2 TRX +3GND4SHIELD GNDBefore Start
5ⒸCopyright 2010Suprema Inc.Cable and Connector PinoutVDPWiegandBefore StartSwitch InputPIN PIN DESCRIPTION1WIEGAND_D02WIEGAND_D13GND4SHIELD GNDPIN PIN DESCRIPTION1SWIN_IN02SWIN_IN13GND4SHIELD_GND5SWIN_IN26SWIN_IN37GND8SHIELD_GNDPIN PIN DESCRIPTION1VDP_S2GND3VDP_VCC4VDP_V5VDP_OPEN6GND7SHIELD_GND
6ⒸCopyright 2010Suprema Inc.Installation ExampleExit ButtonDoor LockPC Network HUB8P Cable3P CableEthernetUSBUSB Firmware Upgrade Only
7ⒸCopyright 2010Suprema Inc.Product Dimension(unit : mm)전면160160
8ⒸCopyright 2010Suprema Inc.Power ConnectionnPower connectionnRecommendedl12V ±10%, at least 1500mA for BioStationT2 alone installation.lComply with standard IEC/EN 60950-1
9ⒸCopyright 2010Suprema Inc.LAN Connection
10ⒸCopyright 2010Suprema Inc.RS485 Network ConnectionBefore Start
11ⒸCopyright 2010Suprema Inc.Relay Connection –Fail Safe Lock
12ⒸCopyright 2010Suprema Inc.Relay Connection –Fail Secure Lock
13ⒸCopyright 2010Suprema Inc.Relay Connection -Automatic Door
14ⒸCopyright 2010Suprema Inc.TTL Input Port Connection –RTE Switches
15ⒸCopyright 2010Suprema Inc.Wiegand Input Connection –External reader
16ⒸCopyright 2010Suprema Inc.System Specifications기타n●CPU :Main B/D CPU -ARM11 667MHz (Samsung S3C6410-667) X 1eanSensor B/D CPU -DSP 400MHz (ADI BP531-400) X 1eann●Memory : Main B/D -Flash : Nand MLC 1GByte + Nor 1MByte, SDRAM(mDDR) : 256MBytenSensor B/D -Flash : SPI 512Kbyte, SDRAM : 32MBytenn●DISPLAY : 5inch WVGA TFT LCD (800 X 480) X 1ea n●LED : 3-Color LED X 2ean●INPUT : 저항막방식 Touch Screen X 1ea + 5 Keypad (F1~F4, CALL)n●CAMERA : 1.3M CMOS Camera X 1ean●I/O Port : Wiegand In/Out (S/W 설정을통해 Input 또는 Output으로사용가능) X 1chnSwitch Input X 4chnRS-485 X 2chnRS-232(Share with RS-485) X 1chnRelay(1A@30Vdc) X 2chnEthernet(10/100M) X 1ch n●Sound Out: System Sound용Speaker X 2ea n●RF CARD : Mifare / EMn●Fingerprint Sensor : OC Sensor Model n●Power Input : 12Vdc Adaptor or POE Input
17ⒸCopyright 2010Suprema Inc.FCC RulesChanges or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.CautionWarning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interface, and (2) this device must accept any interface received, including interference that may cause undesired operation.Information to User This equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, user and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more the following measures:1. Reorient / Relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help
18ⒸCopyright 2010Suprema Inc.Electrical SpecificationMin. Typ. Max. NotesPowerVoltage (V) 10.8 12 13.2Current (mA) -600 1000TTL/Wiegand InputVIH (V) 2 - -VIL (V) - - 0.8Pull-up resistance (Ω)-10k -TTL/Wiegand OutputVOH (V) 4 - - @ IOH = -5mAVOL (V) - - 1 @ IOL = 5mAOutput resistance (Ω)-100 -RelaySwitching capacity (A) - - 10.330V DC125V ACSwitching power (resistive) - - 30W37.5VADCACSwitching voltage (V) - - 110125DCAC
Suprema Inc.16F Parkview Office Tower, Jeongja-dong, Bundang-gu, Seongnam, Gyeonggi, 463-863 KoreaE-mail : support@supremainc.comWebsite : www.supremainc.comFunctions and specifications of the product are subject to changes without notice due to quality enhancement or function update. For any inquiry on the product, please contact Suprema Inc.

Navigation menu