Suprema BEPMTC FINGERPRINT SYSTEM User Manual 2 of 2

Suprema Inc. FINGERPRINT SYSTEM 2 of 2

Contents

User manual 2 of 2

12ⒸCopyright 2007Suprema Inc.Product DimensionMetal BracketFront Side16050 3715040135(unit : mm)160
13ⒸCopyright 2007Suprema Inc.Cables and ConnectorsPower and RS485TCP/IPWiegandoutputDigital Inputs and Relay output PIN PIN DESCRIPTION WIRE1WIEGAND DATA0 GREEN2WIEGAND DATA1 WHITE3WIEGAND GND BLACKPIN PIN DESCRIPTION WIRE1POWER +12V RED2 POWER GND BLACK3 RS -485 GND GRAY4RS -485 TRX+ BLUE5 RS -485 TRX- YELLOWPIN PIN DESCRIPTION WIRE1SW1 INPUT YELLOW2SW1 GND BLACK3SW2 INPUT GREEN4SW2 GND BLACK5 RELAY NORMAL CLOSE ORANGE6RELAY COMMON BLUE7 RELAY NORMAL OPEN WHITEPIN PIN DESCRIPTION WIRE RJ45 PIN1TX + YELLOW 62TX - GREEN 33RX + RED 24RX - BLACK 1
14ⒸCopyright 2007Suprema Inc.Installation of Wall-mount BracketnFix wall mount bracket on a wall using wall mounting screwsnHook BioEntryPlus on the wall mount bracketnFix BioStation and wall mounting bracket using a star shape screw.Wall mounting screwsStar-shaped screwStar-shaped wrench
15ⒸCopyright 2007Suprema Inc.Power ConnectionnRecommended power supplyl12V ±10%, at least 1500mA.lComply with standard IEC/EN 60950-1.lTo share the power with other devices, use a power supply with higher current ratings.
16ⒸCopyright 2007Suprema Inc.Ethernet Connection
17ⒸCopyright 2007Suprema Inc.Ethernet Connection (Direct connection with PC)nTo connect BioEntryPlus with a PC directly, connect both devices with a straight CAT-5 cable. As the BioEntryPlus supports auto MDI/MDIX feature, it is not necessary to usea crossover type cable.
18ⒸCopyright 2007Suprema Inc.RS485 Connection for Host Communication
19ⒸCopyright 2007Suprema Inc.RS485 Connection for Secure I/OnMax number of deviceslMaximum numbers of devices in an RS485 loop are two(2) devices (BioStation or BioEntryPlus) and four(4) Secure I/Os
20ⒸCopyright 2007Suprema Inc.Relay Connection –Fail safe lock
21ⒸCopyright 2007Suprema Inc.Relay Connection –Fail secure lock
22ⒸCopyright 2007Suprema Inc.Relay Connection -Automatic door
23ⒸCopyright 2007Suprema Inc.Digital Input Connection (RTE, Door sensor)
24ⒸCopyright 2007Suprema Inc.Digital Input Connection (Alarm, Emergency sw)
25ⒸCopyright 2007Suprema Inc.WiegandOutput
26ⒸCopyright 2007Suprema Inc.Installation Reference 1 -Stand aloneDoor LockDoor SensorExit ButtonEnroll ScannerPCLANBioEntryPlus
27ⒸCopyright 2007Suprema Inc.Installation Reference 2 –SecureExit ButtonEnroll ScannerPCLANBioEntryPlusRS485Secure I/ODoor SensorDoor Lock
28ⒸCopyright 2007Suprema Inc.Installation Reference 3 –NetworkDoor Zone 2 (Anti passback)Door Zone 1 (Anti passback)BioStation BioEntryPlus BioEntryPlus Secure I/ORS485 RS485LANBioStation Secure I/O BioEntryPlus Exit ButtonPC ServerPC ClientPC ClientRS485Enroll Scanner
29ⒸCopyright 2007Suprema Inc.Electrical SpecificationMin. Typ. Max. NotesPowerVoltage (V) 10.8 12 13.2 Use regulated DC power adaptor onlyCurrent (mA) -250Switch InputVIH (V) -TBD -VIL (V) -TBDPull-up resistance (Ω)-4.7k - The input ports are pulled up with 4.7k resistorsTTL/WiegandOutputVOH (V) - 5 -VOL (V) -0.8 -Pull-up resistance (Ω)-4.7k - The outputs ports are open drain type, pulled up with 4.7k resistors internallyRelaySwitching capacity (A) - - 10.330V DC125V ACSwitching power (resistive) - - 30W37.5VADCACSwitching voltage (V) - - 110125DCAC
30ⒸCopyright 2007Suprema Inc.TroubleshootingnFingerprint can not be read well or it takes too long.lCheck whether a finger or fingerprint sensor is stained with sweat, water, or dustlRetry after wiping off finger and fingerprint sensor with dry towel.lIf a fingerprint is way too dry, blow on the finger and retry.nFingerprint is entered but authorization keeps failing.lCheck whether the user is restricted by door zone or time zone. lInquire of administrator whether the enrolled fingerprint has been deleted frinthe device for some reason.nAuthorized but door is not opened.lCheck whether the time is set as lock time. lCheck whether an antipassback mode is in use. In antipassback mode, only who entered can exit. nDevice doesn’t operate though power is connected.lCheck whether a device and a bracket is well connected to each other. If not, a tamper switch is activated and the device doesn’t work.
31ⒸCopyright 2007Suprema Inc.Device cleaningnWipe out machine surface with dry towel or cloth.nIn case there is dust or impurities on the sensor of the BioStation, wipe off the surface with dry towel.nNote that if the sensor is cleaned by detergent, benzene or thinner, surface is damaged and fingerprint can’t be entered.
32ⒸCopyright 2007Suprema Inc.FCC RulesCautionWarningInformation to UserlChanges or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.lThis device complies with part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.lThis equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, user and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaranteeethat interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient / Relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help
Suprema Inc.16F Parkview Office Tower, Jeongja-dong, Bundang-gu, Seongnam, Gyeonggi, 463-863 KoreaE-mail : support@supremainc.comWebsite : www.supremainc.comFunctions and specifications of the product are subject to changes without notice due to quality enhancement or function update. For any inquiry on the product, please contact Suprema Inc.

Navigation menu