Spotwave Wireless SPOTCELL0010 Spotcell 163 IDEN CU User Manual SpotCell QuickStart 23Jun03

Spotwave Wireless Ltd. Spotcell 163 IDEN CU SpotCell QuickStart 23Jun03

SpotCell QuickStart

potCellS™Quick Installation Guidewww.spotwave.comSpotwave Wireless Inc. 1 Hines Road, Ottawa ON K2K 3C7 Canada780-00004-01-IST© 2002 Spotwave Wireless Inc. All rights reserved. Printed in CanadaSpotwave and SpotCell are trademarks of Spotwave Wireless Inc. Patents pending.
If required, more detailed information on installingSpotCell can be found in the enclosed User Manual. 2. LocationThe DU can be mounted anywhere your cellphone works. This may be on a rooftop (typicalrural set-up), on the side of a building, or insidea building (typical downtown set-up). The CUwill be mounted inside the building where yourcell phone does not work.(The illustration atthe right depicts a typical installation.)To start the installation, place the DU and CUin the general areas where they are to be located.Do not physically mount them at this time.Maximum separation between the DU and CU,and back-to-back positioning are optimal whenboth are mounted indoors.For quick installation of SpotCell:For your safety beware of power lines and ensure thatappropriate safety measures are maintained at all timesduring the installation of the SpotCell 100 equipment.Contact with high-voltage power lines could result indeath or serious injury.,WARNING6. Installation: DUAgain rotate the DU. When the LED turns green, stop therotation. This is the direction the DU must face whenmounted.10. Final Checklist1.Properly ground the DU via the grounding bolt.2.Ensure that there is a drip loop on the cable connectingto the DU.3.Firmly affix the cable to the building where it runsbetween the DU and CU.Rotate 360°3. InstallationConnect the DU and CU with the wrench and cable provided.Back of DUCable connectorCable connectorGrounding boltLED7. Installation: DUNow mount the DU. Typical installations are pictured below .Wall Mount Pipe Mount with Hose Clamp4. InstallationSet the switch on the bottom of the CU to “1” (install).Connect the power supply to the CU, then plug the adapterinto the AC outlet.8. Installation: CUMove the switch on the bottom of the CU to “2” (active).Hold the CU in the location to be mounted. The LCD onthe bottom of the CU indicates coverage by the number ofbars; more bars indicate better coverage.Switch: install modepositionDU(outward-facing unit) CU(indoor unit)1. Parts List• Mounting kit• Donor Unit (DU)• Coverage Unit (CU)• Cable (80'/25 m)• Power supply12CHxxxIn Service5. Installation: DUIn the location where the DU is to be mounted, rotate theunit in a complete circle. The LED on the back will turn redor green during the rotation.9. Installation: CUMount the CU from a wall or ceiling, close to the centre ofthe area requiring coverage.Rotate 360°Mounting bracket

Navigation menu