Spirent Communications NOMADUX-01 Nomad UX is a table top HW device for Voice Quality and Call Performance verification of up to 6 mobile devices via both analog interfaces and Bluetooth radios. User Manual
Spirent Communications Inc Nomad UX is a table top HW device for Voice Quality and Call Performance verification of up to 6 mobile devices via both analog interfaces and Bluetooth radios. Users Manual
Users Manual
Nomad UX Operation Guide
Table of Contents
Table of Figures ............................................................................................................................................. 2
1. Introduction .......................................................................................................................................... 3
1.1. Important Safety Note .................................................................................................................. 3
1.2. Product Introduction ..................................................................................................................... 4
1.2.1. Product Purpose ........................................................................................................................ 4
1.2.2. Interfaces and Indicators .......................................................................................................... 4
1.2.2.1. LED indicators ........................................................................................................................ 5
1.2.2.2. Base unit physical interfaces ................................................................................................. 6
1.3. Technical Support ......................................................................................................................... 6
2. Specifications ........................................................................................................................................ 6
Table of Figures
Figure 1 Front Panel ...................................................................................................................................... 4
Figure 2 Back Panel ....................................................................................................................................... 5
1. Introduction
1.1. Important Safety Note
Any usage of the equipment in a manner not specified by the manufacturer may impair features related
to safety and user protection.
Tout usage de cet équipement, qui n’est pas conforme aux spécifications du manufacturier, peut affecter
les fonctions relatives à la sécurité et la protection de l’utilisateur
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Spirent Communications could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
1.2. Product Introduction
The following sections provide a high-level overview of the unit.
1.2.1. Product Purpose
The unit is designed to measure mobile device performance. The unit is utilized to provide metrics for
voice quality, voice delay, call initiation, call retention, call setup time, loss of network, and Bluetooth
voice performance. This unit is intended to be used in conjunction with Spirent Nomad software.
Hardware drivers and detailed operations instructions are included with the software distribution.
1.2.2. Interfaces and Indicators
Figure 1 Front Panel
Figure 2 Back Panel
1.2.2.1. LED indicators
Indicator
Function
L1, L2, L3, L4, L5, L6
Indicates the status of the link over the active
interface for the given channel. For example,
when utilizing the Bluetooth interface, the LED
indicates the status of the Bluetooth link. The
general behavior is as follows:
Dark – Channel is disabled
Green – Channel is enabled for
Narrowband Analog
White – Channel is enabled for Wideband
Analog
Cyan (Flashing) – Bluetooth initialization
Cyan (Solid) – Bluetooth initialized
Blue (Flashing) – Bluetooth Pairing “On”
Blue (Solid) – Bluetooth is Paired
Yellow (Flashing) – Outgoing call setup
Yellow (Solid) – Outgoing call in progress
Magenta (Flashing) – Incoming call setup
Magenta (Solid) – Incoming call in
progress
Red - Overdrive
Pwr
Light located on top of unit in the Spirent Logo.
When lit, indicates that power is applied to the
unit.
1.2.2.2. Base unit physical interfaces
Interface
Description
HD1, HD2, HD3, HD4, HD5, HD6
Interface for High Definition Audio
PC
USB interface for communication with the PC
GPS
Interface for communication with a GPS device.
+12V
Power supply interface.
1.3. Technical Support
If you need product assistance or want to report problems with the product or the documentation,
please contact us.
Mailing address:
Spirent Service Assurance, Device and E2E Support Services
Spirent Communications
5280 Corporate Drive, Suite A100
Frederick, MD 21703
USA
Phone:
Toll Free: 1-800-SPIRENT
International: +1-818-676-2616
Email: support@spirent.com
Website: support.spirent.com
2. Specifications
Physical Specifications
Dimensions (H x W X D)
2.2 in x 12.5 in x 7.2 in
Weight
3.4 lbs
Case material
Plastic
Communication interfaces
Bluetooth, Analog, USB, GPS
Power Specifications
AC operations
Requires external AC adapter. Adapter
specifications:
Input – 0.5A, 120 VAC at maximum load
0.25A, 230 VAC at maximum load
Output – 12 V, 1.0 amps
Maximum power usage
12 Watts
Maximum heat dissipation
12 Watts
Environmental Requirements
Operating temperature
0 to 55°C
Storage temperature
-20 to 70°C
Humidity tolerance
5 to 85% RH at 40°C