SparkLAN Communications WL850R 802.11g Wireless Mini PCI User Manual NIC SG mu v2 1

SparkLAN Communications, Inc. 802.11g Wireless Mini PCI NIC SG mu v2 1

Manual

User’s Guide 1 Wireless Network Card Series User’s Guide Version 2.1
User’s Guide 2Copyright statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording, or otherwise without the prior writing of the publisher. Nov 2006
User’s Guide 3Contents 1. Introduction ............................................................................................................... 4 2. Wireless LAN Basics................................................................................................. 5 3. Installation for Windows platform.............................................................................. 6 3.1. Installation Overview.............................................................................................. 7 3.2. Install Procedure for Windows ............................................................................... 8 3.3 Uninstall Procedure............................................................................................... 13 4. Configuration Utility................................................................................................. 14 4.1 Link Information .................................................................................................... 15 4.2 AP List................................................................................................................... 17 4.3 Profile Setting........................................................................................................ 18 4.4 About..................................................................................................................... 22 5. Appendix................................................................................................................. 23
User’s Guide 41. Introduction Thank you for purchasing your Wireless LAN Adapter. This User’ s Guide will assist you with the installation procedure. The package you have received should contain the following items: • Wireless LAN Adapter • Quick Installation Guide • CD containing Wireless network adapter utility & drivers and User’s Guide Note: if anything is missing, please contact your vendor Note: This manual is valid for all Wireless LAN adapters, such as PC Card, USB, mini-USB, PCI adapter, mini-PCI…etc.
User’s Guide 52. Wireless LAN Basics Wireless LAN (Local Area Networks) systems offer a great number of advantages over a traditional, wired system. Wireless LANs (WLANs) are more flexible, easier to setup and manage and often more cost effective than their wired equivalence. Using radio frequency (RF) technology, WLANs transmit and receive data over the air, minimizing the need for wired connections. Thus, WLANs combine data connectivity with user mobility, and, through simplified configuration, enable movable LANs. With wireless LANs, users can access shared information without looking for a place to plug in and network managers can set up or augment networks without installing or moving wires. Wireless LANs offer the following productivity, convenience and cost advantages over traditional wired networks: • Mobility - Wireless LAN systems can provide LAN users with access to real-time information anywhere in their organization. This mobility supports productivity and service opportunities not possible with wired networks. • Installation Speed and Simplicity - Installing a wireless LAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. • Installation Flexibility - Wireless technology allows the network to go where wires cannot go. • Reduced Cost-of-Ownership - While the initial investment required for wireless LAN hardware might be higher than the cost of wired LAN hardware, overall installation expenses and life-cycle costs will be significantly lower. Long-term cost benefits are greatest in dynamic environments requiring frequent moves, adds, and changes. • Scalability - Wireless LAN systems can be configured in a variety of topologies to meet the needs of specific applications and installations. Configurations are easily changed and range from peer-to-peer to full infrastructure networks, also allow roaming over a broad area.
User’s Guide 63. Installation for Windows platform The following section will assist you in installing wireless LAN Adapter successfully. You will first install software (Utility) and then insert / attach the Wireless LAN Adapter to your system, and finally set the network properties to accommodate resource sharing and select the type of wireless network that you wish to install. The Wireless LAN card can easily be installed and used, without bothering to connect cables for keeping your computer to use network resources.
User’s Guide 73.1. Installation Overview Here are some steps you will perform in establishing your wireless network connection: z Install the Access Point at first. AP is needed in case of Infrastructure network mode. z Install the software using the Install CD. z Install the Wireless LAN Card. z Install the network protocol(s) required to communicate on your network. Most likely you will need the TCP/IP protocol.
User’s Guide 83.2. Install Procedure for Windows 1. Insert the given Installation CD in the CD-ROM, then browse the CD content and find a file which be named Setup.exe, double click it for beginning the installation. Follow the instruction to finish the installation. 2. After complete the procedure, insert your WLAN card into PCMCIA/PCI slot or USB connector of your system, and then system will detect new hardware. Select “Install the software automatically (Recommended) ”, and then click Next to continue. Note: Do not insert the WLAN Adapter until you are asked to do so, failure of which may result in unsuccessful installation of your WLAN device.
User’s Guide 9Once your system detected the driver, Microsoft will show a warning message as below. Click “ Continue Anyway ” for next step. After copy the file to your system, then the setup is finish. 3. Insert your wireless network card into your computer. Note: If the wireless network card is PCI interface, then you should shut down your computer first and power on your computer after you complete the card insertion.
User’s Guide 104. Click the right button of mouse on My Computer Æ Manage Æ Device Manager. Check whether it has WLAN adapter in one of the sockets or not. If you find Wireless ComboCard in one of the sockets, it means the card is detected properly. If you cannot find this card on device manager, please click the Action Æ Scan for hardware changes for research again. If this card is shown with yellow exclamation mark, please remove it and click the Action Æ Scan for hardware changes for research this hardware again for proper hardware installation. 5. Click StartÆ SettingsÆ Network Connections or right click mouse on the My Network Places (Network Neighborhood) for TCP/IP setting.
User’s Guide 11 6. Click Properties from the pop up menu. Select the Internet Protocol(TCP/IP) and click Properties button.
User’s Guide 127. You can select either Obtain an IP address automatically or Use the following IP address setting. If your choice is the second one then entering the IP address, Subnet mask, Default- gateway and DNS. After setting these parameters appropriately, click OK to return to back menu.
User’s Guide 133.3 Uninstall Procedure Step 1: If you want to uninstall the WLAN adapter, just simply click Start Æ Program Æ Wireless Network UtilityÆ Uninstall It shall uninstall all related programs. Step 2: Restart your Computer.
User’s Guide 144. Configuration Utility Wireless network adapter uses its own management software. All functions controlled by user are provided by this application. Usually this application starts automatically, or click icon from Start Menu to start the Utility application. A new icon - should appear in your Icon tray if your WLAN adapter is working properly. If the icon is in red color, it means that WLAN adapter is under poor signal or the connection is unavailable. User can navigate through “sheets”, by clicking tabs. “X” button will minimize window. To provide more information, click “More…” button. Below description explains the usage of this utility.
User’s Guide 154.1 Link Information Connected To Network - - This field is used to display the current status of connection. The state shows “Connected to Network“ means normal flow of operation in Infrastructure mode. The PC is connected to access point. Networking is available. A state of “Scanning” means that the node is searching for available Access Point within effective range. This field will also display an error message for some reason if the driver fails to initial. ♦ Network Type Infrastructure Mode - The driver will scan all available channels continuously until it finds one or more Access Points that match its SSID. At that point it will try and authenticate and associate with the Access Point. Peer to Peer Mode - The driver will scan for 5 seconds looking for an existing Ad Hoc network using the same SSID. ♦ Channel The current channel that be used for this WLAN adapter will be shown in this field.
User’s Guide 16♦ Encryption All encryption status will be shown in this field. ♦ Link Speed The current transmit rate will be shown in this field. ♦ Signal Strength The signal strength bar graph is only active when the node is in infrastructure mode. The bar graph displays normalized signal strength as reported by the radio, averaged over all frames over 100 bytes long that are received from the AP. ♦ Link Quality The Link Quality bar graph is only active when the node is in Infrastructure Mode. The bar graph displays the quality of the link between the node and Access Point.
User’s Guide 174.2 AP List The Connections Tab shows current status of available APs within the network. User may select profile or ESSID from above list, click “Connect” to connect with the AP. Click “Refresh” to rescan the network, this utility with site survey function, it will detect and list all available AP’s within network.
User’s Guide 184.3 Profile Setting Profile Setting allows user to create profiles for different network environments. Click “Add” button to create new profiles. “Edit” for editing current exist profile. Click “Delete” button if you wish to delete profiles. ♦ Network Name The name of Profile, users can define it by themselves. ♦ Network Type This field allows you to select from a list of supported Network “Modes”. The modes displayed will have two values: “Peer to Peer” and “Access Point”.
User’s Guide 19 Peer to Peer - This is 802.11 peer-to-peer mode. In 802.11 Ad Hoc, only one wireless “cell” is supported for each different SSID. All communication is done from Client to Client without the use of an Access Point. 802.11 Ad Hoc networking uses the same SSID for establishing the wireless connection. Access Point - This mode of operation requires the presence of an 802.11 Access Point. All communication is done via the Access Point, which relays packets to other wireless Clients in the BSS as well as to nodes on a wired network such as Ethernet. ♦ Transmit Rate - The transmission rate at which client of AP transmits the data packets. You may set this to fixed 1Mbps, fixed 2 Mbps, fixed 5.5 Mbps or higher or Automatic for 802.11 AP. ♦ Authentication Mode - You may desire an additional measure of security on your WLAN which can be achieved by using WEP or WPA encryption.
User’s Guide 20This panel allows to entry for 64/128-bit encryption according to WEP function select. To be written to the driver and registry, such as Hexadecimal format, each key must consist of hex digits, which means that only digit 0-9 and letters A-F are valid entries. If entered format is incorrect, the utility will not accept it. WPA pre-shared key is one advanced security for wireless network. There are 2 types algorithm could be supported – one is TKIP, and the other is AES. To use WPA Pre-Shared Key, enter a password in the WPA Shared Key field between 8 and 63 characters long.
User’s Guide 21To enable IP Setting function, please select enable. Please define if the current Profile IP setting will be assign by a DHCP Server or just assign by a fixed IP that is determinate by the Network Administrator. When the DHCP Status is Enable, the TCP/IP information will be assigned by a DHCP Server. Or otherwise please fill up with the correspondence data of the IP settings.
User’s Guide 22 4.4 About “About” tab shows the product version including the detail of Driver, Application and firmware versions. Users must use this version number when reporting their problems to technical support.
User’s Guide 235. Appendix 5.1 Using WinXP Wireless Zero configuration for WPA setup Step1: Check and make sure that the Wireless Zero Configuration service is running. Click Start Æ Settings Æ Control Panel Æ Administrative Tools Æ Services Since WPA security standard has been defined after Windows XP lunch date, then you should also update your current Wireless Zero Configuration utility version to the latest. In order to do so, you must run the patch file which be included the CD or please visit the following website for download it. http://www.microsoft.com/downloads/details.aspx?displaylang=en&familyid=009D8425-CE2B-47A4-ABEC-274845DC9E91 Once the above steps are complete, please proceed to the following page.
User’s Guide 24 Step2: Open the Wireless utility Click Advanced and the following screen will appear. Over the Wireless Networks tab, click Configure.
User’s Guide 25Step3: Verify that the Network Authentication is WPA and the Data encryption is TKIP or AES. (The encryption type should match the WPA setting of your Access Point.) Step4: Click Authentication tab to select EAP type. (The EAP type should match the authentication server before access the authenticated network.) After clicking OK, the Wireless workstation will be able to associate with the AP previously get authentication by an authentication Server.
User’s Guide 26Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
User’s Guide 27 This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, 3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, AP, Router, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: RYK-WL850R”. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
User’s Guide 28European Union Notice: Radio products with the CE marking comply with the R&TTE Directive (1999/5/EC). Compliance with these directives implies conformity to the following European Norms: ◆ EN 60950-1 Product Safety ◆ EN 300 328 Technical requirement for radio equipment ◆EN 301 489-1/-17 General EMC requirements for radio equipment ◆EN 50371

Navigation menu