Southern Telecom PWC12 Wireless Charger User Manual PWC12 20180723

Southern Telecom Inc. Wireless Charger PWC12 20180723

15_PWC12 UserMan

USER MANUALPWC12Wireless ChargerFCC ID: 2ABV4-PWC12
2 charging stand
3 How to UseSetting Up your Wireless Charging Pad•Plug a Micro USB Cable into the Charging Pad's Micro USB port. Next, plug the other end into a power adapter (not included).•After plugging the adapter into a power source, wait for the Wireless Power Indicator to light up. Once the light appears, you are ready to charge.Charging your Mobile Device•Place your phone with its back against the Charging Pad. Check to see if your phone lights up/ indicates that it is charging properly.•If the Wireless Power Indicator begins blinking, there is an issue with the Charging Pad's voltage, current, or temperature. To resolve the issue, remove your device from the charger, unplug the Charging Pad, and repeat the set-up process.•Remarks: Please note that the phone only support standing charge, cannot be placed sideways.
4 Compatible DevicesiPhone X iPhone 8 / 8+ Samsung Galaxy S9 / S9+ Samsung Galaxy S8 / S8+ Samsung Galaxy S7 / S7 EdgeSamsung Galaxy S6 / S6 Edge / S6 Edge+ Samsung Galaxy Note 5 / 7 / 8 Google Nexus 4 / 5 / 6 / 7LG G2 / G3 / G4 / G6HP EliteX3 HTC BXDroid DNA Motorola Droid Maxx / Mini/Turbo Microsoft Lumia 950 XL/ 950 Nokia Lumia 735 / 830 / 920 928/930/ 1520 Nokia Lumia Icon Blackberry Z30 LG Lucid 1 / 2 Sony Xperia Z3V / Z4VSpecifications•Maximum input: 5V 2A •Maximum Output: 5V 1A•Transmission Distance:<8mm•Frequency: 110~205KHZ•Output power: 5W
5 • Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for helpNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.RF Exposure Warning Statements:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.This device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may causeundesired operation.

Navigation menu