Source Pro SP2618FPBT Electric Fireplace Heater with Bluetooth Apps Control User Manual SP2618 HE FGPBBT 2016070 E ETL SP

Source Pro Industries Ltd. Electric Fireplace Heater with Bluetooth Apps Control SP2618 HE FGPBBT 2016070 E ETL SP

User Manual

  INSTRUCTION MANUAL ENCLOSED IMPORTANTPlease note when you open the carton carefully check the unit and make sure there is no damage. If you have any problem with assembling the unit, with how the various funcons work or with damage or missing parts. Please call# +1-844-455-4621 (9:00AM - 5:00PM EST) or email: serviceprokonian@jakeglobal.com immediately for service before return the unit to the store where it was purchased.                  Insert Model:SP2618-HE-FGPBBT
1ELECTRIC FIREPLACE HEATERHOME OWNER’S INSTRUCTION MANUALModel: SP2618-HE-FGPBBTATTENTIONFIND A LOCATION FOR THE FIREPLACE HEATER THAT IS PROTECTED FROM DIRECT SUNLIGHT.FAILURE TO READ ALL INSTRUCTIONS MAY RESULT IN A POSSIBLE ELECTRIC SHOCK, FIRE HAZARD AND / OR INJURY WILL VOID THE WARRANTYCONSUMER SAFETY INFORMATIONPLEASE READ THIS MANUAL BEFORE INSTALLING AND OPERATING THIS APPLIANCEWARNINGIF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY AN ELECTRIC SHOCK OR FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.Thank you and congratulaons on your purchase of a Source Pro fireplace. Please read the installaon & operang instrucons before using this appliance.ATTENTION Also Requires- Wood Fireplace Mantel
2SAFETY INFORMATIONIMPORTANT INSTRUCTIONSPlease read and understand this enre manual before aempng to assemble, operate or install the product.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons.However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separaon between the equipment and the receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada Licence-exempt RSS-210. Operaon is subject to the following two condions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operaon of the device.CAUTION: To maintain compliance with the RF exposure guidelines, place the base unit at least 20cm from nearby persons.WARNING: Changes or modificaons to this unit not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment.WARNING: Extreme cauon is necessary when any heater is used by or near children or individuals with disabilies and whenever the fireplace is le operang and unaended. WARNING: DO NOT run cord under carpeng. DO NOT cover cord with throw rugs, runners, or similar covering.Do not route cord under furniture or appliances. Arrange cord away from traffic areas and where it will not be tripped over.WARNING: Do NOT insert or allow foreign objects to enter any venlaon or exhaust opening as this may cause an electric shock or fire, or damage the appliance.WARNING: This appliance has hot and arcing or sparking parts inside. DO NOT use it in areas where gasoline, paint or flammable vapors or liquids are used or stored. This fireplace should not be used as a drying rack for clothing. Christmas stockings or decoraons should not be hung in the area of it.WARNING: This appliance is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. Keep combusble material, such as furniture, pillows, bedding, papers, clothes and curtains, at least 3 feet from the front of the heater and keep them away from the side and rear.When using electrical appliances, basic precauons should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:Read all instrucons before installing or using the heater.DANGER: If the informaon in this manual is not followed exactly, an electric shock or fire may result causing property damage, personal injury or loss of life.
3SAFETY INFORMATIONUse this appliance only as described in the manual. Any other use is NOT recommended by the manufacturer and may cause fire, electric shock or injury to persons. CAUTION• If possible, ALWAYS unplug this appliance when not in use.• DO NOT operate any heater with a damaged cord or plug or aer the heater malfuncons. • DO NOT operate any heater if it has been dropped or damaged in any manner. Disconnect power at service    panel and have heater inspected by a reputable electrician before reusing.• Any repairs to this fireplace should be carried out by a qualified service person.• Under no circumstances should this fireplace be modified. Parts having to be removed for servicing must be    replaced prior to operang this fireplace again.• DO NOT use outdoors.• This heater is not intended for use in bathrooms, laundry areas and similar indoor locaons. NEVER place heater    where it may fall into a bathtub or other water container.• To disconnect this appliance, turn controls to the off posion, then remove plug from outlet.• ONLY connect to properly grounded outlets.• This appliance, when installed, must be electrically grounded in accordance with local codes, with the current    CSA C22.1 Canadian Electrical Code or follow the Naonal Electrical Code, ANSI/NFPA N0.70.• To prevent a possible fire, DO NOT block air intakes or exhaust in any manner. DO NOT use on so surfaces, like    a bed, where opening may become blocked.• The heaters MUST NOT be located immediately below a socket-outlet.• ALWAYS plug heaters directly into a wall outlet/receptacle. NEVER use with an extension cord or relocatable    power tap (outlet/power strip).• There is a thermostat protecve device provide inside of unit. If the inner temperature overheats or abnormal     heang occurs, the thermostat protecve device will cut off power supply to prevent damage or risk of fire.• DO NOT slide insert on top of wood to avoid scratching wood surface.• DO NOT place any objects on top of insert and top air intake vents as this will cause unit to overheat and can    cause a fire.Electrical ConneconA 15-amp, 120-volt, 60 Hz circuit with a properly grounded outlet is required. Preferably, the fireplace will be on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or the fuse to blow when the heater is in operaon. The unit comes standard with 6-. three-wire cord, exing from the rear of the fireplace. DO NOT exceed the current rang of the current tap. ALWAYS plug heaters directly into a wall outlet/receptacle. NEVER use with an extension cord or relocatable power tap (outlet/power strip).• This heater is for use on 120 volts. The cord has a plug as shown below. See illustraon for grounding instrucon. An adapter as shown at C is available for connecng three-blade grounding type plugs to two-slot receptacles. The green grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available.• Voltage: 120 VAC, 60 HzAmps:  11.7 AmpsWas:  1400 WasELECTRICAL SPECIFICATIONSGrounding PinMetal ScrewCover ofGrounding BoxGrounding PinGrounding MeansAdapterCADBSAVE THESE INSTRUCTIONS
41. Posion your completed mantel close to its final locaon. Make sure you can access the back of the mantel as your electric fireplace insert will be install from the back.2. Place a piece of cardboard or protecve sheet on the floor in order to avoid scratching the decorave surface of your mantel during assembly. Please DO NOT fully ghten the KD screws unl all panels are assembled.3. The fireplace insert can be installed aer the mantel has been fully assembled.WARNING: Make sure the fireplace insert controls are in the OFF posion and the unit is NOT plugged in.CAUTION - High temperature, risk of fire, keep electrical cords, drapery, furnishings, and other combusbles at least 3 feet (0.9 m) from the front of the heater and away from the side and rear.To reduce the risk of fire, do not store or use gasoline or other flammable vapors and liquids in the vicinity of the heater.INSTALLATION INSTRUCTIONINSTALLATIONRear view of fireplace ELECTRIC FIREPLACE INSERT
5OPERATING INSTRUCTIONSMode BuonPower Buon• Pressing the power buon will turn ON or OFF the unit.• When the unit is in ON mode, the power icon indicator light will be shown green. • When the unit is in OFF mode, the power icon indicator light will be shown red. When power OFF, unit will be stopped, if heater is working before power OFF the unit, fan will have 20 seconds delay to ensure heat will not be trapped inside the unit.Note: When plug the unit each me, 5 seconds fan and heater will turn on for internal check program.Note: The unit has a memory funcon with last sengs for heang level and flame brightness effect, unless the main power to the unit has been interrupted.Temperature Seng• The temperature mode controls the heater’s thermostat seng.• Press UP Arrow Buon or Down Arrow Buon to scroll through the pre-set temperature range from 59°F (15°C) to 86°F (30°C), ON & OF (OFF). • Hold the mode buon for 3s, this allows the temperature unit changing from °C to °F or °F to °C. The unit default is °F.Note: This funcon is only available if using the control panel.• When the ambient temperature is higher than the set temperature, heater will turn off automacally.• Press the mode buon to cycle through the different funcons. Each me the mode buon is pressed, the mode will enter the next funcon - Temperature, Timer or Flame Brightness.Timer Seng• The mer seng shoud be used to set the countdown for the unit’s main power. • Press Up Arrow Buon or Down Arrow Buon to adjust the mer seng from 0 hour (OFF) to 9 hours with 0.5 hour interval.Flame Brightness Seng•  The flame brightness mode should be used to set the flame brightness.•  Use Up arrow buon or Down arrow buon to scroll through the flame brightness sengs: F0 (Flame OFF, only lowest brightest on ember bed), F1, F2, F3, F4, F5 (brightest).Note: Heater must be properly installed before it is used.
OPERATING INSTRUCTIONSFlame Color Seng•  The flame brightness mode should be used to set the flame brightness.•  Use Up arrow buon or Down arrow buon to scroll through the flame brightness sengs: C1, C2, C3, C46FIREPLACE REMOTE APP1. Go to Apple Store or Google Play Store2. Type “Fireplace remote” on the search bar3. Click “download”4. Enter your account and password if necessary5. Installaon will be completed automacallyDOWNLOAD THE FIREPLACE MOBILE APPChild LockAcvate Child LockWhen the unit is ON, holding the POWER buon for 10 seconds to acvate the Child Lock funcon. E3 will be displayed and "Beep Sound" for 3 mes that indicate the Child Lock funcon acvate. All funcon keys are locked. When pressing any buon, E3 will be displayed that indicate the Child Lock funcon acvate.Inacvate Child LockTo inacvate the Child Lock funcon, holding the POWER buon for 10 seconds.    Note: Child lock funcon is only available if using the control panel.Manually ResetUnplug unit, wait 5-10 minutes, then the sensor will reset itself.UP Arrow Buon• Use up arrow buon to increase the seng of the selected funcon.Down Arrow Buon• Use down arrow buon to decrease the seng of the selected funcon.Bold Flame Fireplace RemoteFree Fireplace remote App gives you full access and control of your fireplaceQR Code for download - FREEColorSengC1C2YellowBlueYellow + BlueAuto Change(Fade In / Fade Out)C3C4ColorSeng
7. Return to main page by clicking the side menu buon8. Make sure the right corner buon is “ON” (Fig.7)9. Adjust the color, brightness and the temperature with the Bluetooth remoteCONNECT YOUR FIREPLACE WITH FIREPLACE REMOTE1. Turn on the fireplace2. Switch on Bluetooth on your mobile devices3. Tap the side menu buon (Fig. 1)4. Press “Add” (Fig. 2) buon and start searching (Fig. 3) the Fireplace nearby5. Enter a name for the fireplace (Fig. 4)6. (Fig. 6) Blue light represents the Fireplace is connected properly and ready to useFig. 1 Tap the side menu buon (Top le)Fig. 2 Tap the ”+”buon (Top le) Fig. 3 Searching FireplaceFig. 4 Enter a name for the FireplaceFig. 5 Connecng Fireplace Fig. 6 Fireplace Connected7FIREPLACE REMOTE APPConnected to Fireplace and ready to useFig. 8Fig. 7 Long press the name to enter edit modeFig. 9 Switch off the connecon by pressing the toggle (top right)
8CARE AND MAINTENACE• Make sure the unit is turned OFF, unplugged and the heang elements of heater are cool whenever you are cleaning the heater.• Clean the heater when the heater is not in use.• For heavy or connous use, periodic cleaning must be done more frequently.• Clean the metal trim using a water-dampened so, clean cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim.• The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no further lubricaon. However, periodic cleaning/vacuuming of the fan/heater and air intake/output vents is recommended.• Any other servicing should be performed by an authorized service representave.• When the heater is not in use, the heater should be stored in a dry locaon, away from possible damage. The power cord should be stored properly to avoid contact with hot or sharp objects.WARNING: Make sure the power is turned off before proceeding. Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance with naonal and local codes. If repairing or replacing and electrical component or wiring, the original wire roung, color coding and securing locaons must be followed.WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulaons to reduce the risk of fire, electrical shock and injury to persons.WARNING: Do not use this fireplace if any part of it has been under water. Immediately call a qualified service technician to inspect te fireplace and replace any part of the electrical system.WARNING: Disconnect power before aempng any maintenance or cleaning to reduce the risk of fire, electrical shock or personal injury.WARNING: During any service of this appliance, the power to the unit must be turned off. First turn the main power switch to the “OFF” posion. Then remove the electrical plug from the wall outlet.
9CARE AND MAINTENACEReplacing the Remote Control BatteryWhen the remote control stops operang or its range seems reduced, it is me to replace the baeries. Note: The baeries should be removed if the product is to be le unused for a long me.Caution: Non-rechargeable baery is not to be recharged. Exhausted baery is to be removed from the product.1. The baery compartment is located on the back end of the remote control.2. Press the small tab inward as you slide the baery door open and remove the old baery.3. Insert a new CR2025 lithium baery (not included), ensuring the polaries of the baery match the inside of the baery compartment.4. Re-insert the baery door.Disposal of Used BatteryA baery may contain hazardous substances that could be endangering to environment and human health.• This symbol marked on the baery and/or packaging indicates that used baery shall not be treated as municipal waste. Instead it shall be le at the appropriate collecon point for recycling.• By ensuring the used baery is disposed of correctly, you will help prevent potenal negave consequences for the environment and human health. The recycling of materials will help to conserve natural resources.For more informaon about collecon and recycling of used baeries, please contact your local municipality, your waste disposal service or the point of sale where you purchased this item.
PROBLEM POSSIBLE CAUSE SOLUTION10TROUBLE SHOOTING GUIDE1. No power, logs do not glow.1. The unit does not have power. 1. Check that unit is plugged into a standard 120 volt outlet. Then make sure power is set at “ON” posion.2. The overheat protecon device has been engaged.2. Unplug unit, wait 5-10 minutes, then the sensor will reset itself. Plug the unit back in and turn on the heater. If the problem persists, call customer service. 2. E1 displayed on control panel.3. Unplug unit, wait 5-10 minutes, then the sensor will reset itself. Plug the unit back in and turn on the heater. If the problem persists, call customer service. 3. E2 displayed on control panel.3. The ambient temperature sensor is broken or not working correctly.4. E3 displayed on control panel.4. Child lock funcon acvate.  4. To inacvate the Child Lock funcon, holding the POWER buon for 10 seconds. 5. Fan motor connues to blow aer unit is powered off.5. Normal operaon. 5. This is a standard feature; the blower runs for an addional 20 seconds to ensure heat will not be trapped inside the unit.6. Normal operaon.6. Power cord gets warm to the touch.6. This is normal for a heater appliance as it requires more current to operate. Check the connecons of the appliance cord and the outlet. Make sure the plug fits ghtly into the outlet. During use, check the plug and outlet frequently to determine if it is HOT; if so, disconnue use of the appliance and consult with a qualified electrician to check or change the overheang outlet(s).
SOURCE PRO ELECTRIC FIREPLACE MODELSource Pro Industries Ltd. (hereinaer referred to collecvely as the (“company”) warrants that your new Prokonian Electric Fireplace is free from manufacturing and materials defects for a period of one year from date of purchase. Subject to following condions and limitaons.1. The electric fireplace must be installed and operated at all mes in accordance with the installaon and operang instrucon furnished with the product. Any unauthorized repair, alteraon, willful abuse, accident, or misuse of the product shall nullify this warranty.2. This warranty is non-transferable, and is made to the original owner, provided that the purchase was made through an authorized supplier of the company.3. The warranty is limited to the repair or replacement of part(s) found to be defecve in material or workmanship, provided that such part(s) have been subjected to normal condions of use and service, aer said defect is confirmed by the company’s inspecon.4. This warranty does not cover the LED light bar included with the Prokonian Electric Fireplace.5. The Company may, at its discreon, fully discharge all obligaons with respect to this warranty by refunding the wholesale price of the defecve part(s).6. Any installaon, labor construcon, transportaon, or other related costs/expenses arising from defecve part(s), repair, replacement, or otherwise of same , will not be covered by this warranty, nor shall the Company assume responsibility for same.7. The owner/user assumes all other risks. If any including the risk of any direct, indirect or consequenal loss or damage arising out of the use. Or inability to use the product, except as provided by law.8. All other warranes – expressed of implied – with respect to the product, its components and accessories, or any obligaons / liabilies on the part of the Company are hereby expressly excluded.9. The Company neither assumes, nor authorizes any third party to assume, on it behalf, any other liabilies with respect to the sale of the Prokonian product.10. The warranes as outlined within this document do not apply to non Prokonian accessories used in conjuncon with the installaon of this product.11. This warranty gives you specific legal rights, and you may also have other right which vary from state to state.This warranty is void if:a. The fireplace is subjected to prolonged periods of dampness or condensaon.b. Any unauthorized alteraon, willful abuse, accident, or misuse of the product.c. You do not have the original receipt of purchase.Contact the company, at serviceprokonian@jakeglobal.com or call +1-844-455-4621 have your warranty, your sales receipt, locaon of purchase and the model / serial number of your Source Pro products.Email: serviceprokonian@jakeglobal.comCall: +1-844-455-4621111 YEAR LIMITED WARRANTYBASIC WARRANTYIF WARRANTY SERVICE IS NEEDEDCUSTOMER SERVICE
Please refer to part code when reorderingFor questions or comments about product:Email: serviceprokonian@jakeglobal.com or Call: +1-844-455-4621Crafted in ChinaDistributed by Source Pro Industries Ltd.

Navigation menu