Sony PM0904 GSM/WCDMA/LTE Phone + Bluetooth, DTS/UNII a/b/g/n/ac, ANT+, & NFC User Manual PY7 PM0904 draft SAR leaflet 0929

Sony Mobile Communications Inc GSM/WCDMA/LTE Phone + Bluetooth, DTS/UNII a/b/g/n/ac, ANT+, & NFC PY7 PM0904 draft SAR leaflet 0929

Contents

PY7-PM0904_draft_SAR leaflet_0929.pdf

42Your mobile device is a radio transmitter and receiver. It is designednot to exceed the limits for exposure to radio waves recommendedby international guidelines. These guidelines were developed by theindependent scientific organization ICNIRP and include safetymargins  designed  to  assure  the  protection  of  all  persons,regardless of age  and  health.  The guidelines use  a unit  ofmeasurement known as the Specific Absorption Rate, or SAR. TheSAR limit for mobile devices is 2.0 W/kg and the highest SAR valuefor this device when tested at the ear is  ●● W/kg*. As mobiledevices offer a range of functions, they can be used in otherpositions, such as on the body as described in this User Guide****(See Page 41). In this case, the highest tested SAR value is  ●●W/kg*.* The  tests  are  carried  out  in  accordance  with  internationalguidelines for testing.Your handset is a radio transmitter and receiver. It is designed andmanufactured not to exceed the emission limits for exposure toradio frequency (RF) energy set by the Federal CommunicationsCommission of the U.S. Government.The guidelines are based on standards that were developed byindependent scientific organization through periodic and thoroughevaluation of scientific studies. The standards include a substantialsafety margin designed to assure the safety of all persons,regardless of age and health.The exposure standard for wireless handsets employs a unit ofmeasurement known as the Specific Absorption Rate, or SAR.The SAR limit set by the FCC is 1.6 W/kg. The tests are performedin positions and locations (e.g. at the ear and worn on the body) asrequired by the FCC for each model.The highest SAR value for this model handset as reported to theFCC when tested for use at the ear is ●● W/kg, and when worn onthe body in a holder or carry case, is ●● W/kg.European RF Exposure InformationFCC RF Exposure Information0.750.760.540.46
43Body-worn Operation; This device was tested for typical body-wornoperations with the handset kept 1.5 cm from the body. To maintaincompliance with FCC RF exposure requirements, use accessoriesthat maintain a 1.5 cm separation distance between the user'sbody and the handset. The use of beltclips, holsters and similaraccessories  should not contain metallic components in  itsassembly.The use of accessories that do not satisfy these requirements maynot comply with FCC RF exposure requirements, and should beavoided. The FCC has granted an Equipment Authorization for thismodel handset with all reported SAR  levels evaluated as  incompliance with the FCC RF emission guidelines. SAR informationon this model handset is on file with the FCC and can be foundunder the Display Grant section of http://www.fcc.gov/oet/ea/)after searching on FCC ID PY7-PM0904.Additional information on Specific Absorption Rates (SAR) can befound on the FCC website at http://transition.fcc.gov/oet/rfsafety/.The World Health Organization has stated that present scientificinformation does not indicate the need for any special precautionsfor the use of mobile devices. They note that if you want to reduceyour exposure then you can do so by limiting the length of calls orusing a hands-free device to keep the mobile phone away from thehead and body.World Health Organizationhttp://www.who.int/emfList  of Specific Absorption  Rates (SAR) for radio waves bysmartphone / 3G modelhttp://www.softbank.jp/mobile/support/sar/ (Japanese)
50This device complies with Part 15 of the FCC rules. Operation issubject to the following two conditions:(1) This device may not cause harmful interference.(2) This  device  must  accept  any  interference  received,  includinginterference that may cause undesired operation.Any change or modification not expressly approved by Sony mayvoid the user's authority to operate the equipment.This equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:− Reorient or relocate the receiving antenna.− Increase the separation between the equipment and receiver.− Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.− Consult  the  dealer  or  an  experienced  radio/TV  technician  forhelp.FCC Statement for the USA

Navigation menu