Sony PM0791 GSM/WCDMA/LTE + BLUETOOTH, DTS/UNII a/b/g/n/ac, ANT+ and NFC User Manual Sony Mobile Communications AB

Sony Mobile Communications Inc GSM/WCDMA/LTE + BLUETOOTH, DTS/UNII a/b/g/n/ac, ANT+ and NFC Sony Mobile Communications AB

User Manual 4

Important InformationBefore you use your device, please read the ImportantInformation provided in your device regarding warranty,safety and handling information.Protecting your device from waterand dustYour device has IP (Ingress Protection) ratings of IP65 andIP68. These ratings mean that your device is dust tight andis protected against low pressure water stream as well asagainst the effects of submersion for 30 minutes in fresh(non-saline) water up to 1.5 metres deep.Always firmly attach all covers to ensure the water and dustresistance of the device. If liquid is detected inside thedevice, for example, underneath one of the covers, yourwarranty will be void.Before using your device in water and in dusty conditions,refer to the relevant section of the User guide for yourdevice for more detailed information. An online User guideas well as a downloadable version is available atwww.sonymobile.com/support.After using your device in water, wait for the USB port todry before you insert a cable into the port.Protecting the screenAt purchase, there are two layers of plastic film on both thefront and back of your device. You can peel off the outer,or disposable, layer of film on the front and back but do notpeel off the inner, or second, layer of film. The second layerof film protects both sides of your device from damage andscratching. Only remove a sheet of protective film if you arereplacing it with another.Overview12348910567  1211 13 1514171618   1. Charging light/Notification light2. Front camera lens3. Ear speaker4. Proximity/Light sensor5. Power key6. Volume/Zoom key7. Camera key8. Speaker9. Charger/USB cableport10. Strap hole11. Main Wi-Fi/Bluetoothantenna area12. Main camera lens13. Camera light14. GPS antenna area15. Headset jack16. Second Wi-Fi antenna area17. Nano SIM/Memory cardslot cover18. NFC™ detection areaAssemblyYour device only supports nano SIM cards.The nano SIM card and the memory card share the sameholder but have separate slots in the holder. Make sureyou don’t confuse the two.To insert the nano SIM cardIf you insert the nano SIM card while the device ispowered on, the device restarts automatically.1Detach the cover for the nano SIM card and memory cardslot.2Using a fingernail or other similar object, drag out theholder for the nano SIM card and memory card.3Place the nano SIM card in the nano SIM card slot in theholder, then re-insert the holder.4Re-attach the cover.Make sure you re-insert the holder for the nano SIM cardand memory card in the correct orientation. When youdrag out the holder to insert the nano SIM card, do notturn the holder around.To insert the memory card1Detach the cover for the nano SIM card and memory cardslot.2Using a fingernail or other similar object, drag out theholder for the nano SIM card and memory card.3Place the memory card in the memory card slot in theholder, then re-insert the holder.4Re-attach the cover.Make sure you re-insert the holder for the nano SIM cardand memory card in the correct orientation. When youdrag out the holder to insert the memory card, do not turnthe holder around.BasicsTurning on the deviceMake sure that the battery is charged for at least 30 minutesbefore you turn on the device for the first time.To turn on the device1Press and hold down the power key   until the devicevibrates.2Wait a while for the device to start.Waking up the screenTo activate the screen•Briefly press the power key  .Setting up your deviceSetup guideThe first time you start your device, a setup guide opens tohelp you configure basic settings, sign in to some accounts(for example, your Google™ account), and personalise yourdevice. You can also manually access the setup guide at alater stage.To access the setup guide manually1From the Home screen, tap  .2Tap   > Setup guide.Accessing settingsView and change settings for your device from the Settingsmenu. The Settings menu is accessible from both theApplication screen and the Quick settings panel.To access your device settings1From your Home screen, tap  .2Find and tap  .Transferring your contactsXperia™ Transfer is an application that helps you to collectcontacts from your old device and transfer them to your newdevice. Xperia™ Transfer, which you can access from withinthe PC Companion and the Sony Bridge for Mac computerprograms, supports mobile devices that run on severaloperating systems, including iOS, Android™, Windows® andBlackBerry™.To use Xperia™ Transfer, you need:•An Internet-connected computer.•A USB cable for your old device.•A USB cable for your new Android™ device.•Your old device.•Your new Android™ device.To transfer contacts to your new device1Search and download PC Companion (on a PC) or Bridgefor Mac (on a Mac computer) from www.sonymobile.com ifthe application is not already installed.2After successful installation, open the PC Companionapplication or the Sony Bridge for Mac application, thenclick Xperia™ Transfer and follow the relevant instructionsto transfer your contacts.Finding your wayUsing the keysBack navigation key•Go back to the previous screen within an applicationor close the application.Home navigation key•Exit an application and go back to the Home screen.Task navigation key•Open the recently used applications window and thesmall apps bar.Application screen•Open the Application screen.Basic applications and settingsMake phone calls by dialling the number manually orby using the smart dial function.Use the Messaging application to send and receivetext and multimedia messages.Go to Google Play™ to download free and paidapplications for your device.Optimise the device settings to suit your ownrequirements.Notifications and quick settingsTo open or close the Notification panel1To open the Notification panel, drag the status bardownwards.2To close the Notification panel, drag the panel upwards.Support on the webVisit www.sonymobile.com/support to access a range ofsupport options for your device, including downloads,troubleshooting tips and a User guide.Legal informationSony E6553Publication number: 1284-9581.2This Startup guide is published by Sony MobileCommunications Inc. or its local affiliated company, withoutany warranty. Improvements and changes to this Startupguide necessitated by typographical errors, inaccuracies ofcurrent information, or improvements to programs and/orequipment, may be made by Sony Mobile CommunicationsInc. at any time and without notice. Such changes will,however, be incorporated into new editions of this Startupguide. All illustrations are for illustration only and may notaccurately depict the actual device.All product and company names mentioned herein are thetrademarks or registered trademarks of their respectiveowners. Any rights not expressly granted herein are reserved.Visit www.sonymobile.com/us/legal/ for more information.Product compliance: This product has been manufactured byor on behalf of Sony Mobile Communications Inc., 1-8-15Konan, Minato-ku, Tokyo 108-0075, Japan. Inquiries relatedto product compliance based on national legislation shall beaddressed to Sony Mobile Quality Office, Sony MobileCommunications Inc., 1-8-15 Konan, Minato-ku, Tokyo108-0075, Japan. For any service or guarantee matters,please refer to the contact details provided in the separateservice or guarantee documents.© 2014–2015 Sony Mobile Communications Inc. All rightsreserved.To view the CE mark and the FCC IDFCC ID: XX0-XX0000FCC ID: XX0-XX00001Detach the cover for the nano SIM and memory card slot.2Place a fingernail under the right or left edge of the labeltray, then drag the tray outwards. The CE mark and FCC IDare displayed on the tray.To view the regulatory compliance mark•Open the phone dialer, then enter *#07#.
Startup guideXperia™ Z3+E6553Sony Mobile Communications Inc.1-8-15 Konan, Minato-ku, Tokyo 108-0075, Japan

Navigation menu