Sony PM-0807 Quad GSM/WCDMA cellular mobile telephone with BT, WLAN, Ant+ and RF ID User Manual 1
Sony Mobile Communications Inc Quad GSM/WCDMA cellular mobile telephone with BT, WLAN, Ant+ and RF ID 1
Sony >
Contents
- 1. User Manual 1
- 2. User Manual 2
- 3. SAR Leaflet
User Manual 1
![401SOBasic ManualGetting ReadyNames and functions of partsaHeadset connection terminalbSecond microphone*1: Reduces noise to make easy to listen.cNotification LEDdProximity sensor: Switches touch panel on and off to prevent from erroneous operation during a call/Auto-control for display brightness.eEarpiecefFront cameragDisplay (Touch panel)hMicrophone/speaker*1imicroSD memory card/Micro IC Card slotjPower key/Screen lock key:PkVolume key/Zoom keylCamera key: kgklijbac d e fhmCamera lensnGPS/Built-in antenna*2oBluetooth®/Wi-Fi®/ antenna part*2pFlash/Photo lightqNameplate*4rmarksMicro IC CardtNFC (FeliCa compatible) antenna*2uBack cover*3vBuilt-in antenna*2wmicroUSB connection terminalxDesktop Holder contact terminalyStrap hole*1 Do not jab with a sharp object such as a needle. Doing so may cause a fault.*2 The antenna is built in. Covering around the antenna by the hand may affect the quality of call/communication.*3 Back cover is not removable. Removing so forcibly might cause damage or a fault. Also, battery is built into the main unit and not removable by customers.*4 Do not remove the nameplate with stickers of CE mark, FCC ID and IMEI information printed.CE mark and FCC ID1Open the Micro IC Card slot cover, and insert a fingernail into the hook at the edge of the label tray, then pull it out straight.Micro IC CardYour phone number etc. is recorded in the Micro IC Card.The product is compatible only with Micro IC Card. You cannot use the product with an IC-card or micro IC card switched from an cell phone or smartphone.Do not insert an Nano IC Card with a conversion adapter. Doing so may cause a fault.Attaching/removing the Micro IC CardBefore attaching/removing the Micro IC Card, make sure to turn off the product.■Attaching the Micro IC Card1Open the microSD memory card/Micro IC Card slot cover while hooking the groove with your fingernail2Hook the projection of the tray ( ) with your fingernail to slide the tray straight out, then remove the tray from the product3Set Micro IC Card into the tray with IC (metal) part facing up ( ), insert the tray with the card into the main unit and press it all the wayPay attention to the orientation of the notch and pressing tray.4Close the microSD memory card/Micro IC Card slot cover, press it firmly to ensure that there are no gaps between the cover and the main unit■Removing Micro IC Card1Open the cover while hooking the groove of microSD memory card/Micro IC Card slot cover with your fingernail2Hook the projection of the tray with your fingernail to slide the tray straight out, then remove the tray from the main unit3Remove Micro IC Card out of the tray, insert the tray into the main unit and then press it all the wayPay attention to the direction of pushing the tray.4Close the microSD memory card/Micro IC Card slot cover, press it firmly to ensure that there are no gaps between the cover and the main unit❖Information･Note the following points, otherwise handling the Micro IC Card may cause malfunction or damage.･Do not touch the IC (metal) part of the Micro IC Card.･Insert in the correct direction.･Do not use force to attach or remove.･Do not lose the Micro IC Card after it has been removed.Attaching/Removing microSD memory card■Attaching microSD memory card1Open the microSD memory card/Micro IC Card slot cover while hooking the groove with your fingernail.2Check the orientation for inserting, and insert it until it clicksInsert the microSD memory card with the contact side down.3Close the microSD memory card/Micro IC Card slot cover, press it firmly to ensure that there are no gaps between the cover and the main unit❖Information･Insert a microSD memory card in the appropriate direction. Inserting a microSD memory card forcefully into the slot could result in failure to remove the microSD memory card or damage.･Do not touch the terminal of the microSD memory card.■Removing microSD memory cardBe sure to unmount microSD memory card before removing.1From the Home screen, [ ]→[Settings]→[Storage]→[Unmount SD card]→[OK]When it is unmounted, " SD card safe to remove" appears on the status bar to notify you that reading and writing from/to the microSD memory card are disabled.2Open the microSD memory card/Micro IC Card slot cover while hooking the groove with your fingerm n owxypqsrutvIC (metal) partFront BackMicro IC Card3Press the microSD memory card all the way until it clicks, then pull out the microSD memory card slowly" Removed SD card" appears on status bar to inform that the microSD memory card is removed.4Close the microSD memory card/Micro IC Card slot cover, press it firmly to ensure that there are no gaps between the cover and the main unitChargingWhen you purchase your product, the internal battery is not fully charged. Charge the battery before use.❖Information･When the charging starts, notification LED lights according to the battery level. To check the battery level, see the status bar in the top of the Home screen. Alternatively, from the Home screen, []X[Settings]X[About phone]X[Status] and see "Battery level". ･When you start charging with the product powered off, the power turns on even though operation is not available. Do not charge the battery in a place where the use is prohibited such as in airplane or hospital.･It may take longer to complete for charging with a PC or while using the camera function.･You cannot charge the battery by connecting the Desktop Holder to a PC.･Be sure to attach the supplied attachment to the Desktop holder when charging. If the product is installed without the attachment attached, charging fails.Replace the attachment as required. Depending on cover you use, charging may fail.■Charging with the Desktop HolderCharging with the supplied Desktop Holder and Common AC Adapter (sold separately) is explained.1Insert the microUSB plug of Common AC Adapter (sold separately), with the engraved side (▲) facing up, straight into the microUSB connection terminal of the Desktop Holder2Insert the power plug of Common AC Adapter (sold separately) into an outlet3Install the product to the Desktop Holder and move it left or right until it clicksWhen the product and the magnetic connector of the Desktop Holder are connected correctly, the notification LED of the product turns on.4When charging is complete, lift the product to remove while pressing the Desktop Holder5Remove the Common AC Adapter (sold separately) from the outlet■Charging with the AC AdapterCharging with Common AC Adapter (sold separately) is explained.1Open the microUSB connection terminal cover of the product while hooking the groove with your fingernail, and insert the microUSB plug of Common AC Adapter (sold separately), with the engraved side (▲) facing up, straight into the microUSB connection terminal of the product2Insert the power plug of Common AC Adapter (sold separately) into an outletNotification LED lights on the product.3When charging is complete, remove the microUSB plug of Common AC Adapter (sold separately) from the product and close the microUSB connection terminal cover firmly4Remove Common AC Adapter (sold separately) from the outlet■Charging with the DC AdapterYou can charge from cigarette lighter socket in a car by using Common DC Adapter (sold separately). For details, refer to instruction manual of Common DC Adapter (sold separately).■Charging with a PCThe followings describe charging procedure by connecting the product to chargeable USB port on a PC using the microUSB cable of Sony Mobile AC adapter (sold separately).1Open the microUSB connection terminal cover of the product while hooking the groove with your fingernail, and insert the microUSB plug of the microUSB cable, with the engraved side ( ) facing up, straight into the microUSB connection terminal of the product2Insert the USB plug of the microUSB cable into the USB port of a PCNotification LED lights on the product.When a screen for installation of software or a screen for new hardware detection appears, skip or cancel it.3When charging is complete, remove the microUSB plug of the microUSB cable from the product and close the microUSB connection terminal cover firmly4Remove the USB plug of the microUSB cable from the USB port of the PCTurning on (Initial settings)Turning the power on1P (over 1 sec)The product vibrates and after a while the lock screen appears.When you turn on the product for the first time, follow the onscreen instructions to set the initial settings.2Swipe (flick) the screen up or down■Turning the power off1P (over 1 sec)2[Power off]X[OK]❖Information･Press P for over 1 second and long-touch "Power off" X [OK] to restart product in safe mode.■Force-quitting1Open the microSD memory card/Micro IC Card slot cover while hooking the groove with your fingernail, press the OFF button (RED) with a fine-tipped object for approximately three seconds, and release your finger after it vibrates three times❖Information･Pressing the OFF button (RED) by a sharp object such as needle may cause malfunction.･Alternatively, press and hold P and upper part of the volume key at the same time for approximately three seconds, and release your finger after it vibrates three times.Initial settingsWhen you turn on the product for the first time, follow the onscreen instructions to set language, functions, service, etc. For details, refer to "Setting Guide".❖Information･To change the language later, from the Home screen, [ ] X[設定 (Settings)]X[言語と入力 (Language & input)]X[地域／言語 (Language)]. To make settings, from the Home screen, [ ]X[Settings]X[Setup guide].Screen LockWhen the screen lock is set, the backlight turns off to avoid the keys and touch panel from false operations.When the specified time elapses, the product's screen backlight turns off automatically and screen lock is activated.1While the screen is displayed, P■Unlocking screenThe lock screen appears when turning the power on or the backlight on by pressing P.1Swipe (flick) the screen up or down on the lock screen❖Information･On the lock screen, long-touch " " and drag it to " " to activate the camera.Basic OperationKey iconsThe followings are the main functions of x, y, r keys located at the bottom of the screen.Using the touch panelThe display of the product is a touch panel operated by touching it with your finger.■Tap/Double-tapTap: Gently touch a screen and then immediately release your finger. Double tap: Touch the same position twice.■Long-touchKeep touching an item with your finger.■SlideWhile your finger is gently touching the screen, trace it to the desired direction to move over.■Flick (swipe)Operate the screen by quickly moving (flicking) your finger up, down, right, or left.■PinchTouch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers' distance.■DragKeep touching an item or icon, trace it to the desired direction to move.Home screenHome screen consists of multiple screens. Slide or flick left or right to move to the adjacent screen. Tap y to return to the Home screen any time.aHome screen positionIndicates which screen of the several Home screens you are in.bWidgetscWallpapersdShortcuts (Applications)eMedia foldersf基本機能フォルダ (Basic functions folder)gApplication keyAdding to Home screen/Editing Home screenYou can change wallpaper or theme of the Home screen and add/delete/move shortcuts of applications, widgets, folders, etc. on the Home screen.1Long-touch an area of the Home screen where no icons are displayedAlternatively, pinch-in on the Home screen. ■Adding a folder1From the Home screen, long-touch an icon2Drag the icon onto another icon■Deleting shortcuts/widgets/folders1From the Home screen, long-touch an icon or a folder you want to delete2Drag the icon or the folder to " "To delete a folder, then tap "Delete". It also deletes shortcuts etc. in the folder.❖Information･Long-touch a shortcut, widget, or folder icon to move.Using the Applications screenYou can call up functions from the Applications screen. Application icons installed to the product are also displayed.･You may incur communication charges depending on the function.■Starting an application1From the Home screen, [ ]Slide or flick left or right to switch the Applications screen.2Tap an application to useSome applications are stored in a folder.■Main applications■Downloading applicationsYou can download and install applications or games, etc. by using Google Play.･To use Google Play, you need to set a Google account. For details, refer to "Setting Guide".■Deleting (uninstalling) applicationsBefore deleting installed applications, back up contents related to the application that you want to save including data saved in the application.･Some applications may not be deleted.Knowing the status of the product■Status barThe status bar is located at the top of the product screen. On the left of the status bar, notification icons appear to inform missed calls, new mails, operations in progress, etc., and on the right, status icons appear to indicate the status of the product.■Examples of notification icon*1 Appears when switched to another screen such as the Home screen.■Main status icons*1 Two types of network, "LTE" can be used. "4G" appears on the screen for either network.The company determines which network is less busy depending on the condition of the line to connect.■Notification panelIf any notification icons are displayed, slide down the status bar to open the Notification panel. You can check details of notification icons or start corresponding applications.❖Information･To delete a notification, tap "Clear" or flick the notification left or right.･Some notifications may not be deleted depending on the content.xBackReturn to the previous screen. Close a dialog box, menu, or the Notifications panel.yHomeDisplay the Home screen.Long-touch and drag it to " " to activate "Google" application or drag it to " " to activate "What's New" application.rRecently used applicationsDisplay recently used applications on a list and activate or delete them from the list. Also, you can use and set small apps.xx y rabcdefgd d2 Widgets Add a widget.Apps Add a shortcut of an application, a setting screen, etc.Wallpapers Album Select an image from albums to set as a wallpaper.･To set image range, adjust cropping area by dragging, etc.Live WallpapersSelect a content from albums to set as a wallpaper.Photos Select an image from photos to set as a wallpaper.(XperiaTM's Wallpaper)Select an image to set as a wallpaper.･Images displayed to the right of "Photos"/"Live Wallpapers" are "XperiaTM's Wallpaper".Themes Set the wallpapers etc. for the Home screen or the lock screen. , Phone, Contacts Play StoreBrowser , Camera, AlbumSettings MapsCalendar , Google, Voice SearchNew Gmail messageNew PC mail message●New E-mail messageNew SMS/Receiving notification service message, New Receiving notificationTalking*1/ Calling*1/ ReceivingMissed callUSB connectingWi-Fi®open network available, Signal level (Level 4, Out of service area), Data communication status (4G (LTE) available*1, 3G available), Battery level (100%, Charging), Silent mode (Vibration, Mute)Airplane mode is activated,Wi-Fi®connected, Wi-Fi®communicatingbcdefijklmghpqrstnoa](https://usermanual.wiki/Sony/PM-0807.User-Manual-1/User-Guide-2337305-Page-1.png)
![･When you set screen lock to "Swipe", slide the status bar downward to check the Notification panel without unlocking the screen.■Notification LEDNotification LED informs charging prompt, battery level while charging, missed calls, new mails, etc. by turning on or flashing.*1 Notification LED flashes while backlight is turned off or lock screen is displayed.❖Information･When the remaining battery is not sufficient for turning the product ON, pressing P makes LED flash red three times.･When you start charging with the product powered off, the notification LED turns in red. When the status of battery appears on the display, however, the notification LED lights in color that indicates the battery level.■Checking own phone number1From the Home screen, [ ]X[Settings]2[About phone]X[Status]The phone number of the product is shown under "My phone number".❖Information･Alternatively, from the Home screen, [ ] X[Contacts]X [Myself] to check your phone number.■Setting the Silent ModeSet the ringtone volume to 0. Setting to Silent mode does not mute sounds for shutter, playback of video or music, alarm, etc. And adjusting the volume of ringtone & notifications or pressing upper part of volume key cancels Silent mode.1P (over 1 sec)2[]/[]Tap " " to set mute (ringtone volume 0) and tap " " to set vibrator.❖Information･Alternatively, slide the status bar downward u [Quick settings] u [Sound] to switch the Silent mode settings.■Setting Airplane modeWhen airplane mode is set, all wireless functions (phone, packet communication, Wi-Fi® function, Bluetooth® function, NFC Reader/Writer, P2P function) are turned off.1P (over 1 sec) u[Airplane mode]❖Information･Slide the status bar downward X Tap [Quick settings] X "Airplane" to switch the airplane mode on or off.Entering charactersUse software keyboard to enter characters.To display the software keyboard, tap a character input box on the character entry screen for adding contacts, creating a message, etc.■Switching keyboardsWith "XperiaTM Japanese keyboard" for Japanese input, you can switch input types between "Keypad" and "QWERTY".1Tap a character input box2[ ] on quick toolbarWhen quick toolbar is not displayed, tap " " (when the character mode is "Alphabet"/"Numeric", tap " "/" " to switch to "Hiragana/Kanji" then appears).3[Switch to QWERTY]/[Switch to keypad]❖Information･Tap " " at the bottom left of the screen to hide the software keyboard. ･Word suggestions or direct conversion candidates for the entered characters appear. Tap a word to enter.･Tap " " to delete the character before the cursor.･Tap " " to enter symbols, facemarks etc. from the displayed list.･For details on "XperiaTM Japanese keyboard" for Japanese input, character input box→[]→[使い方ガイド (Operation guide)], see POBox Plus operation guide.TroubleshootingBefore you assume that the product is malfunctioning, check the following:Updating SoftwareYou can update the product to the most recent software for optimal performance and to get the latest enhancements.･You are charged for data communication when connecting to the Internet from the product by using packet communication.･You are recommended to back up your data before updating software.･For details, visit http://www.sonymobile.co.jp/support/ or refer to the "Instruction Manual" (Japanese) application or "取扱説明書 (Full instruction manual)" (Japanese) available.■Downloading and updating softwareUpdate files can be downloaded from the Internet web site into the product directly.･Note that when Wi-Fi® communication becomes unstable, packet communication takes the place automatically, which may apply communication fees.1From the Home screen, [ ]X[ツール (Tool)]X[Update Center]2Tap "System" tabX[]Main specificationsStatus DescriptionRed The battery is charging when the remaining battery level is 14% or lower.Orange The battery is charging when the remaining battery level is 15% - 89%.Green The battery is charging when the remaining battery level is 90% or higher.Flashing redThe remaining battery level is 14% or lower.Flashing whiteIndicates missed call, new Gmail message, new SMS message.*1Symptom What you should checkPower is not turned on even though P is pressedIs the internal battery charged?Is P pressed for over 1 second?The power goes off Is the internal battery charged?The power turns off while activation screen is displayedIs the internal battery charged?The screen freezes and the power cannot be turned offOpen the microSD memory card/Micro IC Card slot cover while hooking the groove with your fingernail, press the OFF button (RED) with a fine-tipped object for approximately three secondsu release your finger after it vibrates three times. Alternatively, press and hold P and upper part of volume key at the same time for approximately three seconds, and release your finger after it vibrates three times.(Out of service area) appearsIs the product out of the service area or in an area where the signal is weak?Is the built-in antenna covered with hand?Cannot charge the battery (Notification LED does not light, the battery icon does not change into charging one)Is the specified charging equipment (sold separately) attached properly?Cannot operate key/touch panelIs the power turned on?Is "Screen lock" set?Turn off the power and then turn it on again.Cannot operate touch panel as intendedAre you operating with gloved hands?Are you operating with a fingernail or foreign object on the operating screen?Charging is not completeIs the temperature of the product raised or very low?A message such as "charge the battery" appearsThe battery is almost dead.Symptom What you should checkBattery usage time is shortIs the battery fully charged? Charge until the notification LED turns green.Is the internal battery end-of-life?Is the product used for a long period at places where (out of range) appears?The screen backlight turns off in a short whileIs set "Sleep" period too short?The display is dark. Is "Brightness" set to dark?Is the proximity sensor blocked or covered by sticker?Screen response is slow when you tap on the screen/press the keysWhen a large amount of data is saved in the product or transferring large-size data between the product and microSD memory card, the screen response may be delayed.Cannot recognize a microSD memory cardIs the microSD memory card inserted properly?Is the microSD memory card unmounted?Symptom What you should checkDisplay Approx. 5 inches TRILUMINOS® Display for mobile Approx. 16.77 million colors1,080 x 1,920 dotsWeight Approx. 167 g (with internal battery)Dimension (W x H x T) Approx. 72 mm x 137 mm x 10.8 mmContinuous call timeIn Japan Approx. 1340 min.Overseas (GSM)Approx. 800 min.❖Information･The continuous call time, continuous stand-by time, continuous Full Seg watching time, continuous 1Seg viewing time and continuous tethering time may drop to less than half depending on the battery charging status, usage environment such as temperature, reception condition at the location where the product is used, and the function settings.Continuous stand-by timeIn Japan Approx. 640 hours (4G (LTE))Approx. 670 hours (3G)Overseas (GSM)Approx. 710 hoursCharging time Using Common AC Adapter (sold separately): Approx. 150 min. (alone)Approx. 160 min. (with Desktop Holder)Continuous Full Seg watching timeApprox. 4 hours 50 min.Continuous 1Seg viewing timeApprox. 6 hours 40 min.Continuous tethering timeApprox. 580 min. (4G (LTE) on WAN)Approx. 790 min. (3G on WAN)Wi-Fi® tethering maximum connection number10wxyzABuv](https://usermanual.wiki/Sony/PM-0807.User-Manual-1/User-Guide-2337305-Page-2.png)