Sony Group UTXP11 UHF Synthesized Transmitter User Manual 00UWPV1

Sony Corporation UHF Synthesized Transmitter 00UWPV1

Users Manual

Wireless Microphone System3-870-284-11 (1)Operating InstructionsUWP-V1/V2/V6UWP-X7/X8©2008 Sony CorporationThe supplied CD-ROM includes the Operating Instructions for the UWP-V1/V2/V6/X7/X8 Wireless Microphone System (English, French, German, Italian, and Spanish versions). For more details, see “Using the CD-ROM Manual” on page 20.
2For the UTX-B2/H2/P1 TransmittersOwner’s RecordThe model and serial numbers are located at the rear or on the bottom of the unit. Record the model and serial numbers in the space provided below.Refer to these numbers whenever you call upon your Sony dealer regarding this product.Model No. _____________________Serial No. _____________________IMPORTANTThe name plate is located on the bottom and the serial number is located inside the battery compartment (UTX-P1).IMPORTANTLa plaquette signalétique est posée sur le dessous de l’appareil et le numéro de série dans le logement des piles (UTX-P1).WICHTIGAm Boden des Geräts befindet sich das Typenschild und die Seriennummer befindet sich innen im Batteriefach (UTX-P1).IMPORTANTELa targhetta con il nome si trova sul fondo e il numero di serie si trova all’interno del vano pile (UTX-P1).IMPORTANTELa placa de caracteristicas se encuentra en la parte inferior y el número de serie está en el interior del compartimiento de pilas (UTX-P1).Notice for customers in the U.S.A.Use of Sony wireless devices is regulated by the Federal Communications Commission as described in Part 74 subpart H of the FCC regulations and users authorized thereby are required to obtain an appropriate license.You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted.Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate this device.This device complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This device has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR).Notice for customers in Canada:Use of Sony wireless devices is regulated by the Industry Canada as described in their Radio Standard Specification RSS-123.A licence is normally required. The local district office of Industry Canada should therefore be contacted. When the operation of the device is within the broadcast band, the licence is issued on no-interference, noprotection basis with respect to broadcast signals.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
3Remarque à l’intention des utilisateurs au Canada:L’usage des appareils sans fil Sony est réglementé par l’Industrie Canada comme décrit dans leur Cahier des Normes Radioélectriques CNR-123.Une licence est normalement requise.Le bureau de l’Industrie Canada doit être contacté. Lorsque le fonctionnement de l’appareil respecte les limites de la bande de radiodiffusion, la licence est accordée sur la base d’une non-interférence, non-protection pour les signaux de radiodiffusion.L’utilisation doit répondre aux deux conditions suivantes : (1) ce matériel ne doit pas provoquer de brouillage et (2) il doit accepter tout brouillage, même celui qui est susceptible d’affecter son fonctionnement.La mention « IC: » devant le numéro de certification/ homologation signifie uniquement que les spécifications techniques d’Industrie Canada sont remplies.Für Kunden in Deutshland (UTX-B2/H2/P1)Entsorgungshinweis: Bitte werfen Sie nur entladene Batterien in die Sammelboxen beim Handel oder den Kommunen. Entladen sind Batterien in der Regel dann, wenn das Gerät abschaltet und signalisiert “Batterie leer” oder nach längerer Gebrauchsdauer der Batterien “nicht mehr einwandfrei funktioniert”. Um sicherzugehen, kleben Sie die Batteriepole z.B. mit einem Klebestreifen ab oder geben Sie die Batterien einzeln in einen Plastikbeutel.Notice for customers in EuropeNotification aux clients européensHinweis für die Kunden in EuropaAvvertenza per gli utilizzatori in EuropaAviso para los clientes de EuropaNota para utilizadores da EuropaMededeling voor de klanten in EuropaAtt observera för kunder i EuropaMeddelelse til kunderne i EuropaHuomautus Euroopassa asuville asiakkaillemmeΓια τους πελάτες στην EυρώπηHereby, Sony Corporation, declares that this UTX-B2/H2/P1 is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. U.K. 854.125 - 862 MHzGermany 790 - 814 MHzNorway 800 - 820 MHzLuxembourg 800 - 830 MHz, 854.125 - 862 MHzBelgium 854.125 - 862 MHzDenmark 800.100 - 819.900 MHzFrance 798 - 830 MHzItaly 800 - 820 MHzSweden 800 - 820 MHzSwitzerland 800 - 820 MHzFinland 800.100 - 819.900 MHzIceland 800 - 814 MHzTurkey 470 - 862 MHz
15Configuration of the PackagesUWP-V6The UWP-V6 consists of a plug-on transmitter (UTX-P1), a body-pack transmitter (UTX-B2), a portable diversity tuner (URX-P2), and their accessories. When used in conjunction with a compact camcorder, the UWP-V6 makes a mobile system for ENG (Electronic News Gathering) or EFP (Electronic Field Production) purposes.Body-pack transmitter (UTX-B2) (1)Portable diversity tuner (URX-P2) (1)Supplied accessoriesSoft case (1)Plug-on transmitter (UTX-P1) (1)Shoe mount adapter (1) Belt clip (2)Wind screen (1) Holder clip (1)Stereo mini plug-BMP conversion cable (1)Operating Instructions (1)CD-ROM (1) (for U30, U42, CE62, and CE67 models)Warranty card (1) (for U30 and U42 models)XLR-BMP conversion output cable for the URX-P2 (1)Omni-directional lavalier microphone (1)
20 Using the CD-ROM ManualUsing the CD-ROM ManualThe supplied CD-ROM includes Operating Instructions for the UWP series (English, French, German, Italian, and Spanish versions).PreparationsThe following program must be installed on your computer in order to read the Operating Instructions contained on the CD-ROM.• Adobe Reader Version 6.0 or higherIf Adobe Reader is not installed, you can download it from the following URL:http://www.adobe.com/Adobe and Adobe Reader are trademarks of Adobe Systems Incorporated in the United States and/or other countries.Reading the CD-ROM manualTo read the operation manuals contained on the CD-ROM, do the following.1Insert the CD-ROM in your CD-ROM drive.A cover page appears automatically in your browser.If it does not appear automatically in the browser, double-click on the index.htm file on the CD-ROM.2Select and click on the Operating Instructions that you want to read.This opens the PDF file of the operation manuals.The files may not be displayed properly, depending on the version of Acrobat Reader. In such a case, install the latest version you can download from the URL mentioned in “Preparations” above. If you have lost or damaged the CD-ROM, you can purchase a new one to replace it. Contact your Sony service representative.Reading the Sony Wireless Microphone System Frequency ListThe frequency lists for U30 and U42 models (for the U.S.A.) and CE62 and CE67 models (for Europe) are contained in the CD-ROM disc. To read the frequency lists, do the following.1Insert the CD-ROM in your CD-ROM drive.A cover page appears automatically in your browser.2Select and click on the frequency list that you want to read.This opens the PDF file of the frequency list.Note
51Important Notes on UseImportant Notes on UseOn usage and storage• The UWP series components must be used within a temperature range of 0°C to 40°C (32°F to 104°F).• Operating the UWP series components near electrical equipment (motors, transformers, or dimmers) may cause it to be affected by electromagnetic induction. Keep the UWP series components as far from such equipment as possible.• The presence of the lighting equipment may produce electrical interference over the entire frequency range. Position the UWP series components so that interference is minimized.• To avoid degradation of the signal to- noise ratio, do not use the UWP series components in noisy places or in locations subject to vibration, such as the following:- near electrical equipment, such as motors, transformers or dimmers- near air conditioning equipment or places subject to direct air flow from an air conditioner- near public address loudspeakers- where adjacent equipment might knock against the tunerKeep the UWP series components as far from such equipment as possible or use buffering material.On cleaningClean the surface and the connectors of the UWP series components with a dry, soft cloth. Never use thinner, benzene, alcohol or any other chemicals, since these may mar the finish.To prevent electromagnetic interference from portable communication devicesThe use of portable telephones and other communication devices near the UWP series components may result in malfunction and interference with audio signals. It is recommended that portable communication devices near the UWP series components be turned off.
52 SpecificationsSpecificationsDesign and specifications are subject to change without notice.Transmitters (UTX-B2/H2/P1)Items common to all transmittersOscillator typeCrystal-controlled PLL synthesizerCarrier frequenciesModel available in USA: 758 to 806 MHzModel available in Europe: 798 to 862 MHzModel available in Australia: 792 to 806 MHzOperating frequency bandModel available in USA and Europe: 24 MHz BWModel available in Australia: 14 MHz BWPre-emphasis50 µsFrequency characteristics50 Hz to 18 kHzSignal-to-noise ratio60 dB or moreTone signal32 kHzAttenuation0 to 21 dB, in 3-dB stepsDisplayChannel, frequency, audio level, RF level, accumulated battery use timePower requirements3.0 V DC (two LR6/AA size alkaline batteries)Battery lifeApprox. 6 hours (measured with two Sony LR6/AA size alkaline batteries at 25°C (77°F), with output power of 30 mW)Body-pack transmitter (UTX-B2)Antenna1/4λ wave length wireAudio input connector3.5-mm dia. mini jackAudio input level–60 dBV to –39 dBVRF output level30 mW/5 mW selectableReference deviation±5 kHzDistortion1.0% or lessIndicatorPower onNoteAlways verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
53SpecificationsDimensions63 × 83 × 20 mm (2 1/2 × 3 3/8 × 13/16 inches) (w/h/d) (excluding the antennas)Mass Approx. 145 g (5.1 oz) including batteriesHand-held microphone (UTX-H2)Microphone unitDynamicDirectivityUnidirectionalAntenna1/4λ wave length wire (internal)RF output level30 mW/5 mW selectableReference deviation±5 kHzDistortion1.0% or lessIndicatorPower onDimensionsφ 49 × 253 mm (1 15/16 × 10 inches) (dia/length)Mass Approx. 300 g (11 oz) including batteriesPlug-in transmitter (UTX-P1)RF output level50 mWReference deviation±10 kHzMaximum deviation±40 kHzDistortion1.0% or less at 1 kHz, –60 dBV (MIC INPUT)Audio reference levelMic: –60 dBVLine: +4 dBuAudio input connectorXLR-3-11typeIndicatorAF/PEAK levelDimensions
54 Specifications44 × 99 × 36 mm (1 3/4 × 4 × 1 7/16 inches) (w/h/d) (including the audio input connector)Mass Approx. 185 g (6.5 oz) including batteriesTuners (URX-P2/M2)Items common to all tunersType of receptionSpace diversityOscillator typeCrystal-controlled PLL synthesizerReception frequenciesModel available in USA: 758 to 806 MHzModel available in Europe: 798 to 862 MHzModel available in Australia: 792 to 806 MHzOperating frequency bandModel available in USA and Europe: 24 MHz BWModel available in Australia: 14 MHz BWSignal-to-noise ratio60 dB or moreDe-emphasis50 µsReference deviation±5 kHzFrequency characteristics50 Hz to 18 kHzDistortion1.0% or less at 1 kHz modulationTone signal32 kHzIndicatorRF input levelPortable diversity tuner (URX-P2)Antenna1/4λ wave length wireSquelch level25 dBµAudio output level–58 dBmAudio output connector3.5 mm dia. mini jackHeadphones output level5 mW (16 ohms)DisplayChannel, frequency, audio level, RF level,accumulated battery use time, monitor levelPower requirements3.0 V DC (two LR6/AA sizealkaline batteries)Battery lifeApprox. 6 hours (measuredwith two Sony LR6/Assizealkaline batteries at 25 °C (77°F))Dimensions
Sony CorporationPrinted in Korea

Navigation menu