Sony Group PCWAC800S Wireless LAN PC Card User Manual

Sony Corporation Wireless LAN PC Card

User Manual

4Click the button that corresponds to your type of CD-ROM drive.If you are using an external CD-ROM drive, follow the instructions on the screen and copythe contents of the CD-ROM to your hard disk. When the copy is complete, click“Main Menu”.The Main Menu of the Easy Installation Wizard appears.5Click “Install Driver”.6When prompted, insert the Wireless LAN PC Card in the PC card slot.You do not need to turn off your computer when you insert the Wireless LAN PC Card.Notes• If your computer has two PC Card slots, insert the Wireless LAN PC Card into the top slot. If inserted into thebottom slot, the antenna of the Wireless LAN PC Card will block the top slot.• Depending on the depth and configuration of PC card slots on your computer, you may not be able to insertthe Wireless LAN PC Card.Push the Wireless LAN PC Card into the slot until it is firmly seated. If the card does not fiteasily, do not force it in. Take the card out and try reinserting it.When you insert the Wireless LAN PC Card, the device driver installed automatically. Waituntil the installation is complete.7When installation is complete, the following screen appears. Click “Continue”.Continuing allows you to install the utility software.8Click “Install Software Utility”.The utility installation starts.OverviewImportantComputer Firewall FunctionsWhen using the Windows XP “Internet Connection Firewall” functionEnabling the Windows XP “Internet Connection Firewall” function may prevent you frombeing able to access your computer through wireless communication. (This function isinactive under the Windows XP operating system default settings.) Because of this function,you may not be able to connect to your network when you change your Access Pointsettings. If this happens, deactivate the “Internet Connection Firewall” function, connect tothe network, and then reactivate the function. For details, refer to Windows XP Help.NotesNetwork security is an important issue. You are urged to consider carefully how best to protect yourcomputer.When using a personal firewall function provided by virus scanning ornetwork security softwareVirus scanning and network security software sometimes includes a function called a“personal firewall” that is designed to prevent illegal access by outside entities. Dependingon the software, the security level of this function may be initially set to a high level. If thishigh security level setting is left in effect, it may be impossible for an outside entity toaccess your computer. This can cause problems such as not being able to connect to thenetwork when changing the Access Point’s settings. In this event, lower the security level inorder to permit the network connection. For details, refer to the manuals provided with yoursoftware.Notes• Pay special attention to security issues.• For questions regarding firewall functions, please contact your firewall software manufacturer.1When using the Wireless LAN PC Card in Access Point Network Connectionmode, turn on the Access Point.zHintThe Access Point Network connection mode is used when building a network around an access point (soldseparately). The Peer to Peer Network connection mode is used when a network is composed mainly ofcomputers with wireless capabilities (i.e. that do not need to connect through an access point).2Insert the supplied CD-ROM into the CD-ROM drive of your computer.The Easy Installation Wizard starts automatically.zHintIf the Easy Installation Wizard does not appear when you insert the suppliedCD-ROM into your CD-ROM drive, double-click “Setup.exe” ( ) on theCD-ROM. Depending on the settings of your computer, the file name may be “Setup”.3When the following message appears, click “OK”.To remove the Wireless LAN PC Card1Quit any software accessing the wireless LAN (e.g. Internet Explorer).2Click on your Windows operating system taskbar.3Click “Safely remove Sony 802.11g Wireless LAN Adapter” or “StopSony 802.11g Wireless LAN Adapter” on the shortcut menuthat appears.If your computer has two PC Card slots• When using a computer which has two PC Card slots arranged vertically (one above the other), insertthe Wireless LAN PC Card into the top slot. If inserted into the bottom slot, the antenna of theWireless LAN PC Card will block the top slot.• If you insert the Wireless LAN PC Card into a slot other than the one you usually use, the computertreats the card as a new device and automatically begins installing device drivers for it. Completing thedriver installation makes it possible to use the Wireless LAN PC Card in that slot. Installation isperformed automatically by the installation wizard. (For instructions on how to uninstall the WirelessLAN PC Card driver, see page 50.)zHintIf you are using the Windows Me or Windows 2000 operating system, you can register up to 32networks for each PC card slot. However, you have to register each network individually. You cannotshare the settings across slots.To PC Card slotInsert in arrowdirectionThe Wireless LAN PC Card (2.4 GHz/5 GHz IEEE 802.11a/b/g) PCWA-C800S is a PC Card typewireless network card. With this card, you can build a wireless LAN.This guide explains how to use the supplied CD-ROM to install the Wireless LAN PC Carddevice driver and Wireless Panel. You must insert the Wireless LAN PC Card into your computerbefore installing the device driver and Wireless Panel.1Installing the software4-679-929-11(1)PCWA-C800S© 2003 Sony Corporation Printed in JapanWireless LAN PC Card(2.4 GHz/5 GHz IEEE 802.11a/b/g )Quick Start GuideBefore reading this guide, be sure to read the“Read This First” supplement.This guide explains how to install thesoftware required to use of the WirelessLAN PC Card (2.4 GHz/5 GHz IEEE 802.11a/b/g) PCWA-C800S and the necessarysettings to establish a connection withAccess Point.Step 1 Making Access PointThe installation procedures are performed with an easy-to-use wizard. Before you start, verify thefollowing.• The wizard located on the CD-ROM supplied with the Wireless LAN PC Card. Make sure thatyour CD-ROM drive is ready for use.• When using the Wireless LAN PC Card in Access Point Network Connection mode, you must installthe Access Point and make the necessary settings before proceeding. For details about theseprocedures, refer to your Access Point user’s guide.Notes• To install the supplied software on a computer running the Windows 2000 operating system, log on with a useraccount listed in “Administrators”. To install the supplied software on a computer running the Windows XPoperating system, log on with a user account with administrator access privileges. You cannot install the softwareor modify settings when logged on with any other account.• To change any of the Wireless Panel settings on a computer running the Windows 2000 operating system, log onwith a user account listed in “Administrators”. You cannot modify settings when logged on with any otheraccount.• Exit all other Windows operating system programs.• Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States of America and/or other countries.• Sony, VAIO, , , and the Eco Info logo are trademarks of Sony Corporation.• In this manual, the Wireless LAN PC Card (2.4 GHz/5 GHz IEEE 802.11a/b/g) PCWA-C800S is referred to asthe Wireless LAN PC Card.• In this manual, Microsoft® Windows® 2000 Professional is referred to as Windows 2000, Microsoft® Windows®XP Professional and Microsoft® Windows® XP Home Edition are referred to as Windows XP.Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink.9Follow the instructions on the screen to complete the installation.This completes the installation of the software.Once Wireless Panel is installed, appears on your Windows operating system taskbar.What to do nextMake Access Point connection settings.When using the Windows 2000 operating system, proceed overleaf.When using the Windows XP operating system, click “Main Menu” as necessary to return tothe first screen of the wizard, or click to close the Easy Installation Wizard, and thenproceed overleaf.2 Making Access Point Connection SettingsContinued overleafThe setting procedure differs according to your operating system. Refer the section to youroperating system.
Step 2 Making Access PointConnection SettingsAfter installing the necessary software, you must make the necessary settings to establish aconnection with the Access Point.If you want to establish a connection in Peer to Peer Network connection mode, refer to theWireless Panel Help for details about the necessary settings.Windows 2000 operating system1Click “Connect to Access Point”.The following screen appears.2Make the appropriate settings.1Network Name (SSID)This is a unique ID used to identify wireless networks. The setting can be made individually forAccess Point Network connection mode and Peer to Peer Network connection mode. Whenconnecting to an existing network, consult your network administrator regarding the propersettings. When changing an existing Network Name, you can use up to 32 alphanumericcharacters (including symbols).zHint• Opening the “Network Name” drop-down list will show the Network Names of anyAccess Points within range. You can then select a Network Name from the list.• When using the Wireless LAN Access Point PCWA-A320, the default Network Name(SSID) of the Access Point is shown on the ID label of the Access Point. For details on the position ofthe label and other information, refer to the manuals provided with the Access Point.2WEPIf Data Encryption (WEP) is enabled for the Access Point to which you connect, select thisitem. When this item is selected, you also need to enter the encryption key (WEP key) in the“Key” and “Confirm key” fields.The data encryption function serves to prevent unauthorized access to the network.For security reasons, it is strongly recommended that you enable this feature. The settingcan be configured individually for Access Point Network connection mode and Peer to PeerNetwork connection mode. When connecting to an existing network, consult your networkadministrator regarding the proper settings. For information on how to control this setting at theAccess Point, refer to the manuals of the Access Point.KeyIf data encryption (WEP) is enabled for the Access Point, enter the encryption key (WEP key)here. Because this key functions as a password that enables communication with the network,the key entered here must be exactly the same as that set for the Access Point. Only computersfor which the key has been configured correctly can join the network. The number of charactersdepends on the “ASCII/Hex” and “Length” settings (see table below).ASCII HexadecimalPermissible characters Alphanumeric characters 0 to 9, A to F, a to fMaximum number 5 or 13 characters 10 or 26 charactersof charactersConfirm keyRe-enter the encryption key that you entered in the “Key” box.zHintThis product supports a function called “roaming” which allows the creation of a wireless network withmultiple Access Points for wider coverage. When using this function, configure all Access Points to thesame Network Name (SSID) and Data Encryption (WEP) settings.123When you are done, click “Next”.The following screen appears.4Make sure that the settings are correct, and then click “Connect”.Wait until the Wireless LAN PC Card connects to the Access Point.When the Wireless LANPC Card establishes the connection with the Access Point, the following screen appears.This completes the Access Point connection settings procedure.zHintYou can change the connection settings and network connection mode from Wireless Panel. For details abouthow to use Wireless Panel, refer to the Wireless Panel Help.Windows XP operating systemNotesBefore configuring the Wireless LAN PC CardPerform the following steps to confirm that the “Use Windows to configure my wireless network settings” check boxis selected. This option is selected by default.1Click “Start”, “Control Panel”, and double-click “Network Connections”.zHintIf “Network Connections” is not displayed, click “Switch to Classic View”.2Right-click “Wireless Network Connection *” (“*” is a number that differs according to thecomputer settings), and click “Properties” on the shortcut menu.3Click the “Wireless Network” tab.4Confirm that the “Use Windows to configure my wireless network settings” check box isselected. If not, select it.1Click “Start”, point to “Connect To”, and click “Show all connections”.The “Network Connections” window appears.2Right-click “Wireless Network Connection *” (“*” is a number that differs accordingto the computer settings), and click “View Available Wireless Networks” on theshortcut menu.The “Connect to Wireless Network” dialog box appears.zHint• If the computer is not connected to a wireless network, an “x” is shown for the “Wireless NetworkConnection *” icon in the “Network Connections” window.• If you have installed Windows XP Service Pack 1, see page 26.3From the “Available Wireless Networks” list in the “Connect to Wireless Network”dialog box, select the Access Point to which you want to connect.zHintThe “Available Wireless Networks” list shows the names of Access Points within communication range of thecomputer. When using the Wireless LAN Access Point PCWA-A320, the default Network Name (SSID) ofthe Access Point is shown on the ID label of the card. For details on the position of the label and otherinformation, refer to the manuals of the Access Point. Because the Network Name of an Access Point mayhave been changed, consult your network administrator if you are not sure.4If Data Encryption (WEP) is enabled for the Access Point, enter the encryptionkey (WEP key) in the “Network key” field.The key entered here must be exactly the same as that set for the Access Point. Permissiblecharacters and their maximum number are detailed below.ASCII HexadecimalPermissible characters Alphanumeric characters 0 to 9, A to F, a to fMaximum number 5 or 13 characters 10 or 26 charactersof characterszHint• ASCII and hexadecimal characters are automatically identified.• The data encryption (WEP) function serves to prevent unauthorized access to the network. When thefunction is enabled, only computers configured with the correct encryption key (WEP key) can join thenetwork. For security reasons, it is strongly recommended that you enable this feature. The setting can bemade individually for Access Point Network connection mode and Peer to Peer Network connection mode.When connecting to an existing network, consult your network administrator regarding the proper settings.For information on how to control this setting at the Access Point, refer to the manuals of the Access Point.Signal level indicatorThe communication status is shown by the signal level indicator on your Windows operatingsystem taskbar.Meaning of indicator appearanceExcellentGoodPoorOut of rangeCard not inserted(Wireless LAN PC Card is not inserted or not recognized correctly)Peer to Peer(Communicating in Peer to Peer Network connection mode)Opening the Wireless PanelTo open the Wireless Panel, proceed as follows.Double-click the signal level indicator on your Windows operating system taskbar.The Wireless Panel appears.zHint• When you move the mouse pointer over an item in the Wireless Panel screen, a short description of that itemappears.• For details about how to use Wireless Panel, refer to the Wireless Panel Help.When using Service Pack 1If you installed Windows XP Service Pack 1, steps 3 and 4 must be performed asfollows.3From the “Available Wireless Networks” list in the “Connect toWireless Network” dialog box, select the Access Point to which youwant to connect.4Depending on the Data Encryption (WEP) settings of the AccessPoint, proceed as follows.• Data Encryption (WEP) at selected Access Point is enabledEnter the encryption key (WEP key) in the “Network key” field. (The input is shownonly as asterisks.) For verification, the same string must be entered once more in the“Confirm network key” field.• Data Encryption (WEP) at selected Access Point is disabledSelect the “Allow me to connect to the selected wireless network, eventhough it is not secure” check box. (For security reasons, enablingdata encryption is recommended.)5Click “Connect”.Connection to the Access Point is established.If the Access Point has already been configured, the setup procedure is nowcomplete.If you want to change the Access Point settings, refer to the manuals of the AccessPoint for information on how to proceed.NotesTo use an Access Point to connect to the Internet, you must change the Access Point defaultsettings.zHintFor additional information on the wireless network capabilities of the Windows XP operatingsystem, refer to Windows XP “Help and Support”. (Click “Start”, and click “Help and Support”,enter “wireless” into the Search field, and click the green arrow icon.) You may also wish to consultthe Windows XP operating system documentation.Using the Wireless PanelThe Wireless Panel is a software application that shows information about the communicationstatus of the computer connected to the wireless network. Normally, the Wireless Panel runs inthe background and only shows the radio signal condition by means of the signal level indicatoron your Windows operating system taskbar. The main screen of the Wireless Panel containsmore detailed information. When running under operating systems other than Windows XP,communication setup and network switching are also performed using the Wireless Panel.Notes• To use the Wireless Panel under the Windows 2000 operating system to modify communication settings, logon with a user account listed in “Administrators”. You cannot modify settings when logged on with any otheraccount.• On a computer running the Windows XP operating system, communication setup and network switching arenot performed with the Wireless Panel but with built-in functions of the Windows XP operating system.However, the Wireless Panel can be used to check the communication status.Signal level indicator
Read This First 4-679-931-11(1)Read This First 4-679-931-11(1)WARNINGTo prevent fire or shock hazard, do not expose the unit to rain or moisture.Owner’s RecordThe model and serial numbers are located on the back of the unit. Record the serial number in the space providedbelow. Refer to them whenever you call upon your Sony dealer regarding this product.Model No. PCWA-C800SSerial No.______________CAUTIONAny changes or modifications not expressly approved in this manual could void your warranty.FCC ID: AK8PCWAC800SExposure to Radio Frequency Radiation.The radiated output power of the Wireless LAN PC Card is far below the FCC radio frequency exposure limits.Nevertheless, the Wireless LAN PC Card shall be used in such a manner that the potential for human contact duringnormal operation is minimized.Only use the product indoors when using itwith 802.11a (5 GHz).NoteThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio or communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to television reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.Declaration of ConformityTrade Name: SonyModel No: PCWA-C800SResponsible Party: Sony Electronics Inc.Address: 680 Kinderkamack Road,Oradell, NJ 07649 USATelephone: 201-930-6972This phone number is for FCC-related matters only.This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This equipment may not cause harmful interference, and(2) this equipment must accept any interference received, including interference that may cause undesiredoperation.You are cautioned that any changes or modifications not expressly approved in this manual could void yourauthority to operate this equipment.Safety InformationWARNING• Opening the product, for whatever reason, could lead to damages that are not covered by the warranty.• Do not use this product on hospital premises. Doing so may cause medical devices to malfunction.• If using the product near a pacemaker, make sure it is at least 9 inches (22 cm) away from the pacemaker.• Do not use this product in an aircraft, as doing so could cause the aircraft's equipment to malfunction. Make sureyou remove the equipment from the PC card slot before carrying your computer onto an aircraft.• Do not apply unnecessary physical strain on the product when it is inserted in your computer as this could damagethe product and/or your computer.• This products is made for use in USA and Canada only.FCC RF ExposureInstall and connect this product by following descriptions in its Operating Instructions before using it.This equipment generates and radiates radio frequency energy.SAR (Specific Absorption Rate) for this device was measured in accordance withFCC OET Bulletin 65. Supplement C and guidelines established in IEEE C95.1-1991.In order to comply with FCC RF exposure limits please maintain at least 4 mm (0.16 in) spacing between the user andthe antenna of this device while it is in use.This product can only be used with desktop computers and laptop (notebook) computers with side mounted PCMCIAslots.This device cannot be used with other types of host devices, such as PDAs.Users are not permitted to make changes or modify the system in any way.For customers in Canada• This class B digital apparatus complies with Canadian ICES-003.• Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this devicemust accept any interference, including interference that may cause undesired operation of the device.• To prevent radio interference to the licensed service, this device is intended to be operated indoors and away fromwindows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject tolicensing.• The term “IC” before the equipment certification number only signifies that Industry Canada technicalspecifications were met.Pour les utilisateurs au Canada• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.• L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire debrouillage et (2) l'utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si cebrouillage est susceptible de compromettre le fonctionnement du dispositif.• Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé àl’intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou sonantenne d’émission) est installé à l’extérieur, il doit faire l'objet d'une licence.• Le terme “IC” avant le muméro d’homologation ne signifie seulement que les normes d’Industrie du Canada ont étérespectées.About the supplied softwareTHE SUPPLIED SOFTWARE IS SUPPLIED PURSUANT TO THE APPLICABLE END-USER LICENSEAGREEMENT.• Copyright laws prohibit reproducing the software or the software manual in whole or in part, or renting the softwarewithout the permission of the copyright holder.• In no event will SONY be liable for any financial damage or loss of profits, including claims made by third parties,arising out of the use of the software supplied with this product.• In the event a problem occurs with this software as a result of defective manufacturing, SONY will replace it atSONY’s option or issue a refund; however, SONY bears no other responsibility.• The software provided with this product cannot be used with equipment other than that which is designated for usewith.• Please note that, due to continued efforts to improve quality, the software specifications may be changed withoutnotice.Program © 2001, 2002, 2003 Sony Corporation,© 2000-2003 Atheros Communications, Inc., All Rights ReservedDocumentation © 2003 Sony CorporationSony, VAIO, , , and the Eco Info logo are trademarks of Sony Corporation.Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States of America and/orother countries.MMX and Pentium are registered trademarks of Intel Corporation.All other trademarks are trademarks of their respective owners.• In this manual, Microsoft® Windows® 2000 Professional is referred to as Windows 2000.• In this manual, Microsoft® Windows® XP Professional and Microsoft® Windows® XP Home Edition are referred toas Windows XP.Notes• The user interface of the Sony supplied software may differ slightly from that shown in this manual.• This manual is written based on the assumption that you are familiar with basic operations of the Windowsoperating system. For computer operations, refer to manuals that come with your computer.OverviewThe Wireless LAN PC Card (2.4 GHz/5 GHz IEEE 802.11a/b/g)PCWA-C800S is a PC Card type wireless network card. With this card, you can build a wireless LAN, allowingmultiple computers to communicate and exchange data without needing any physical connection. The suppliedWireless Panel software lets you easily configure the card for multiple networks. For example, you can store differentsettings required for networking at the office and at home, or quickly switch between Access Point (Infrastructure)Network connection mode and Peer to Peer (Ad-Hoc) Network connection mode. This greatly facilitates use of thecard in various environments and for a range of applications.z Hints• The network mode can easily be switched using the supplied Wireless Panel software.• To use the card in Access Point Network connection mode, an IEEE 802.11g or IEEE 802.11b compliant WirelessLAN Access Point* (available separately) is necessary.Accessing the Internet from various points within your home(Access Point Network connection mode)With a separately available Access Point you can easily build a wireless network. By connecting a DSL modem, cablemodem, or ISDN router to the Access Point, you can access the Internet from the living room, bedroom, or any otherconvenient location in the house. Equipping multiple computers with a Wireless LAN PC Card also allows you toexchange files between the computers via the Access Point.z HintThe illustration above gives an example of a system configuration using the Access Point Network connection mode.Two computers equipped with Wireless LAN PC Cards establish communications with the Wireless BroadbandRouter PCWA-AR800. The Wireless Broadband Router is connected to the ADSL modem, therefore it is possible toaccess the Internet through this wireless connection.Direct communication between computers(Peer to Peer Network connection mode)The Peer to Peer Network connection mode enables computers equipped with Wireless LAN PC Cards tocommunicate directly. This allows file sharing in locations where the Wireless LAN Access Point is not present.Documentation and Help fileThis product comes with the following documentation and help files.❑Read This First (this document)Explains how to install the Wireless LAN PC Card and how to configure all settings of the card.❑Quick Start GuideThis document explains how to install software required to use the Wireless LAN PC Card.❑Troubleshooting GuideThis document provides solutions to the most common problems users have with their Wireless LAN PC Card.❑Wireless Panel Online HelpThis is the Online Help of the supplied Wireless Panel software. Refer to it for instructions on how to use thesoftware.Supplied softwareThe supplied CD-ROM contains the following sftware.❑Wireless LAN PC Card driverThis device driver is necessary to the operation of the Wireless LAN PC Card.❑Wireless PanelWireless Panel is a utility software that lets you configure the computer for the wireless LAN and monitor thecommunication status. The software is also used to switch between networks.Normally, the Wireless Panel appears as an icon on your Windows operating system taskbar, which shows thecommunication status.When using the card for the first time, see Read This First information on how to install theWireless LAN PC Card driver and the Wireless Panel.System requirementsTo use the supplied software, the following system requirements must be met:❑Windows®-compatible PC:– 128 MB RAM or more– Card Bus compliant PC Card slot– CD-ROM drive (for software installation)❑Operating system:– Microsoft® Windows® 2000 Professional– Microsoft® Windows® XP Home Edition– Microsoft® Windows® XP Professional❑Display:High color (16-bit color) or higher, 800 × 480 pixels or higherNotes• Correct operation is not assured for all computers, even if satisfying the above system requirements.• Correct operation in an OS upgrade environment is not assured, except for factory provided Windows XPoperating system upgrade packages for Sony VAIO® series computers.• For Internet access via the wireless LAN, an IEEE 802.11g or IEEE 802.11b compliant Wireless LAN AccessPoint (available separately) is necessary.• An Internet Service Provider (ISP) is required for Internet access.Precaution when using the Wireless LANPC CardBecause of the particular shape of the PCWA-C800S, it may not be possible to insert it into all computers.• The PCWA-C800S has an antenna protruding up 0.4 in. (9 mm). If obstructions 0.6 in. (15 mm) in length ormore come in contact with it when you insert the PCWA-C800S into the PC card slot, you cannot fully insert thewireless LAN PC card into the slot.The antenna is obstructed. ThePCWA-C800S cannot be inserted.Wireless LAN PC Card PCWA-C800S• If the PC card slot of your computer is more than 3.3 in. (85 mm) in length, you cannot fully insert the PCWA-C800S into the slot.The PC card lsot is longer than3.3 in. (85 mm). The PCWA-C800Scannot be inserted.Wireless LAN PC Card PCWA-C800SFor details, visithttp://www.sony.com/wirelesslansupportComputerComputer4-679-931-11(1) 2003 Sony Corporation Printed in JapanPCWA-C800SRead This FirstLisez-moi en premierWireless LAN PC Card(2.4 GHz/5 GHz IEEE 802.11a/b/g)
Read This First 4-679-931-11(1)Read This First 4-679-931-11(1)PrecautionsSafetyDo not drop or cause a mechanical shock to the Wireless LAN PC Card, as this may damage the unit.InstallationDo not expose the Wireless LAN PC Card to the following conditions:• Unstable surfaces• High humidity or poor ventilation• Excessive dust• Direct sunlight or extreme heat• Closed cars• Magnetized location (near magnets, speakers, or televisions)• Locations exposed to frequent vibration• Locations where the transmission of radio waves may be obstructed by metal plates or concrete wallsOperationIf the Wireless LAN PC Card is moved directly from a cold location to a warm locations, or if it is placed in a verydamp environment, moisture may condense on the parts inside. The Wireless LAN PC Card may not operateproperly if moisture condensation occurs.CleaningClean the casing with a soft cloth, lightly moistened with water or a mild detergent solution. Do not use any type ofabrasive pad, scouring powder, or solvent such as alcohol or benzene as it may damage the finish of the casing.SpecificationsProtocol supportTCP/IP compliantStandard complianceIEEE 802.11aIEEE 802.11bIEEE 802.11gRadio frequency2.4 GHz wireless network:2.4 to 2.4835 GHz (ISM band)5 GHz wireless network:5.11 to 5.35 GHzModulationDS-SSOFDMGeneralPower requirements3.3 V DC (supplied from the computer through the PC card adapter)CurrentPeak current at transmission: 540 mAPeak current at reception: 330 mAConnectorPC Card Card Type II (Card Bus)DimensionsApprox. 2.2 × 0.2 × 3.6 inches(Approx. 54 × 5 × 91 mm) (W × H × D)(Antenna height: 0.55 inches (Approx. 14 mm))MassApprox. 1.4 oz. (Approx. 40 g)Operating temperature41°F to 95°F (5°C to 35°C) (not condensed)Environment temperature–4°F to 140°F (–20°C to 60°C) (not condensed)Supplied accessories• Wireless LAN PC Card• CD-ROM• Read This First• Quick Start Guide• Troubleshooting Guide• Warranty CardDesign and specifications are subject to change without notice.Getting helpThis section describes how to get help and support from Sony, as well as troubleshooting tips for your Wireless LANPC Card.About Sony’s Support OptionsSony provides several support options for your Wireless LAN PC Card.❒Read This First (This manual) This document contains important information that you should read beforeusing the Wireless LAN PC Card.❒Quick Start Guide explains how to install software required to use the Wireless LAN PC Card PCWA-C800S.❒Troubleshooting Guide contains answer to frequently asked questions and common problems.❒Wireless Panel Online Help is the Online Help of the supplied Wireless Panel utility software. Refer to itfor instructions on how to use the software.❒The Sony Wireless LAN products support Web site http://www.sony.com/worelesslansupport provides the latest information on your Wireless LAN products.❒The Sony e-mail support service answers your questions by electronic mail. Just send your questionin an e-mail message and a customer service representative will reply. To send a question to Sony e-mail support,fill out the e-mail form at http://www.ita.sel.sony.com/support/pc/email.html❒The Sony fax-back service provides you with answers to commonly asked questions. You can use thisautomated service to request a list of available topics then select the topics you want to receive. To contact theSony fax-back service, call 1-877-760-7669.❒The Sony Customer Information Services Center offers information about your Wireless LANproducts and other Sony products that work with your computer. To contact the Sony Customer InformationServices Center, call 1-877-760-7669.Open 24 hours/day, 7 days/week.

Navigation menu