Sony Group PCSRF1 Wireless Remote Commander User Manual

Sony Corporation Wireless Remote Commander

User Manual

RF Remote Commander User Manual (Version x.x) Before operating the unit, please read this manual thoroughly and retain it for future references PCS-RF1© 200x Sony Corporationx-xxx-xxx-xx(x)
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture Installing batteries Two R6 (size AA) batteries are supplied for Remote Commander. To avoid risk of explosion, use R6 (size AA) manganese or alkaline batteries. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO YOUR LOCAL REGULATIONS. For the customers in the USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For the customers in Canada This Class A digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Pour les utilisateurs au Canada Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. L’utilisation doit répondre aux deux conditions suivantes : (1) ce matériel ne doit pas provoquer de brouillage et (2) il doit accepter tout brouillage, même celui qui est susceptible d’affecter son fonctionnement. Déclaration d’exposition aux radiations des circuits intégrés : Cet appareil est conforme aux limites d’exposition aux radiations des circuits intégrés RSS-102 établies pour un environnement non contrôlé. Pour l’installation et l’utilisation de cet appareil, il convient de prévoir une distance minimum de 20 cm entre le radiateur et votre corps.
Location and Function of Each Part 1) MIC ON/OFF button 2) Volume +/- buttons 3) LAYOUT menu button 4) Back SPACE button 5) Arrow buttons 6) Enter button 7) Return button 8) Number (0-9, #, *) buttons 9) Battery compartment (rear) 10) Power on/off button 11) PRESENTATION button 12) ZOOM (T/W) button T: zoom in W: zoom out 13) VIDEO INPUT SELECT button 14) CAMERA menu button 15) TOOL button 16) CONNECT button 17) DISCONNECT button 18) Function button 19) Indicator Battery Installation 1. Remove the cover 2. Install two AA type batteries. See below polarity of each battery. 3. Attach the cover.
SPECIFICTIONS In accordance with IEEE 802.15.4 Middle band: 2405 – 2480MHz（ 11ch – 26ch） Output Power: -2 ± 3 dBm Operating Voltage: DC 3 V (2.2 - 3.6 V) Power Supply: AA(R6) size batteries (2 pcs) Dimensions 47 x 47 x 195 mm (W x H x D) (not including projections) http://www.sony.net/ Sony Corporation

Navigation menu