Sony Group HIDB70 Information Alarm Clock User Manual HID B7

Sony Corporation Information Alarm Clock HID B7

User manual

HID-B7_4-281-389-11(3)_US4-281-389-11(3)Information Alarm ClockImportant Information GuideNotice© 2011 Sony Corporation. Reproduction in whole or in part without written permission is prohibited. All rights reserved. This guide and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval.This product is Wi-Fi Certified and complies with the interoperability specifications established by the Wi-Fi Alliance®.For Your ConveniencePlease contact Sony directly if you:  Have questions on the use of your unit after reading the Quick Start Guide and Important Information Guide. Experience difficulty operating your unit.Contact Sony Customer Support at: http://www.sony.com/dashsupport or call Sony at the following number:For customers in the U.S.A.: 1-866-918-2485Sony will work to resolve your questions more quickly than your retailer or place of purchase.Please Do Not Return the Product to the StoreRegister your dash™ device at http://www.sony.com/mydashWARNINGTo reduce fire or shock hazard, do not expose the unit to rain or moisture.CAUTIONYou are cautioned that any changes or modifications not expressly approved in this guide could void your authority to operate equipment.NOTIFICATIONThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS.DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.IMPORTANT NOTETo comply with FCC RF exposure requirements, the following antenna installation and device operating configurations must be satisfied: the antenna has been installed by the manufacturer and no change can be made.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. This device (HID-B7) has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.Precautions Connect the AC adaptor to an easily accessible wall outlet close by. If trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet. Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. To disconnect the AC power adaptor cord (mains lead), pull it out by the plug, not the cord. Do not leave the unit in a location near a heat source such as a radiator or air duct, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock. Allow adequate air circulation to prevent internal heat build up. Do not place the unit on a surface (a rug, a blanket, etc.) or near materials (a curtain) which might block the ventilation holes. Should any solid object or liquid fall into the unit, unplug the unit and have it checked by qualified personnel before operating it any further. To clean the casing, use a soft cloth dampened with a mild detergent solution. When cleaning, unplug the unit.If you have any questions or problems concerning your unit, please contact Sony customer support.©2011 Sony Corporation Printed in ChinaHID-B7Owner’s RecordThe model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product.Model No. HID-Serial No.Model No. AC-Serial No.
HID-B7_4-281-389-11(3)_USNotes on LCD screen The displayed image on the screen is not identical in picture quality and colors with the printed image because phosphor methods or profiles differ. Please regard the displayed image as just a reference. Do not press against the LCD screen with excessive force. The screen may be discolored and that may cause a malfunction. Exposing the LCD screen to direct sunlight for long periods may cause malfunction. The LCD screen is manufactured using extremely high-precision technology, so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen. These points are normal in the manufacturing process and do not affect the operation in any way. Images may trail across on the LCD screen in a cold location. This is not a malfunction.Additional InformationWireless NetworkIf unable to establish a reliable connection to the wireless router, please check the following items. The wireless router is on. You are connected to the Internet. The network settings are correct. The device is in a location with a strong wireless signal. See http://www.sony.com/dashsupport for a complete network troubleshooting guide.No picture Make sure the unit’s AC power adaptor cord is connected securely to the DC IN jack. Make sure the AC power adaptor cord is connected to the wall socket securely.No sound/Poor sound Good picture, no sound - Check the volume control. Disconnect your headphones. Quality depends on content provided by the sound content provider as well as your connected bandwidth. Check the file you are playing is a supported audio format. The dash unit may not be compatible with headphones with a microphone.General In the event of a power failure the alarm functions will not work until the power is restored. The unit will not play music files that contain copy protection.SpecificationsMain unitLCD screenLCD panel: 18 cm/7 inches800 × 480 resolutionLCD backlight life20,000 hoursInput/Output connectorUSB (USB2.0 Mass Storage class)Headphone (3.5 mm Stereo mini jack)Audio Output powerMono Speaker 1.6 WPower requirementsDC IN jack, 12 VPower consumption5.7 W (normal operation)Operating temperature5 °C to 35 °C (41 °F to 95 °F)Dimensions (width/height/depth)Approx. 190.4 mm × 129.8 mm × 72 mm (7 1/2 × 5 1/8 × 2 7/8 inches)MassApprox. 0.51 kg (1 lb 2 oz) without AC adaptorSupported Photo formatsJPEG Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 formatSupported Audio formatsMPEG-Layer III(MP3)*Stereo/Mono(2.0 audio profile)Available sample rates: 32/44.1/48 KHzAvailable bit rates:32/40/48/56/64/80/96/112/128/160/192/224/256/320 kbit/s* MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thompson.* ID3 tag support for only ISO-8859-1.Wireless SpecificationsCompliance IEEE 802.11 b/g/nFrequency Range 2400~2483.5 MHzData Rates IEEE 802.11b: 1/2/5.5/11 MbpsIEEE 802.11g: 6/9/12/18/24/36/48/54 MbpsIEEE 802.11n: Up to 150 MbpsAC adaptorPower requirements100 V to 240 V, 50 Hz/60 Hz 0.4 ARated output voltage 12 V 1.5 ADimensionsApprox. 63.9 mm × 49.5 mm × 29.5 mm (2 5/8 × 2 × 1 3/16 inches)MassApprox. 110 g (3 7/8 oz)See the label of AC adaptor for more details.Design and specifications are subject to change without notice.Notices and Licenses for Excluded Software Used in this DeviceThird party software is used in this device. Such third party software may change over time. Please visit http://www.sony.net/Products/Linux/ for (i) an up-to-date list of the third party software included in each version of the device; (ii) the license terms applicable thereto; and (iii) where required, the source code associated therewith and available for download.This product contains software that is subject to the following GNU General Public License (hereinafter referred to as “GPL”) or GNU Lesser General Public License (hereinafter referred to as “LGPL”). These establish that customers have the right to acquire, modify, and redistribute the source code of said software in accordance with the terms of the GPL or LGPL supplied.The source code for the above-listed software is available on the Web.To download, please access the following URL then select the model name “dash.”URL: http://www.sony.net/Products/Linux/Please note that Sony cannot answer or respond to any inquiries regarding the content of the source code.
HID-B70_4-281-390-11(3)_US4-281-390-11(3)Information Alarm ClockImportant Information GuideNotice© 2011 Sony Corporation. Reproduction in whole or in part without written permission is prohibited. All rights reserved. This guide and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval.This product is Wi-Fi Certified and complies with the interoperability specifications established by the Wi-Fi Alliance®.For Your ConveniencePlease contact Sony directly if you:  Have questions on the use of your unit after reading the Quick Start Guide and Important Information Guide. Experience difficulty operating your unit.Contact Sony Customer Support at: http://www.sony.com/dashsupport or call Sony at the following number:For customers in the U.S.A.: 1-866-918-2485Sony will work to resolve your questions more quickly than your retailer or place of purchase.Please Do Not Return the Product to the StoreRegister your dash™ device at http://www.sony.com/mydashWARNINGTo reduce fire or shock hazard, do not expose the unit to rain or moisture.CAUTIONYou are cautioned that any changes or modifications not expressly approved in this guide could void your authority to operate equipment.NOTIFICATIONThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.Do not expose the batteries to excessive heat such as sunshine, fire or the like.IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS.DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.CAUTIONReplace the battery with the specified type only. Otherwise, fire or injury may result.Dipose of used batteries according to the instructions.THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.IMPORTANT NOTETo comply with FCC RF exposure requirements, the following antenna installation and device operating configurations must be satisfied: the antenna has been installed by the manufacturer and no change can be made.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. This device (HID-B70) has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.Precautions Connect the AC adaptor to an easily accessible wall outlet close by. If trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet. Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. To disconnect the AC power adaptor cord (mains lead), pull it out by the plug, not the cord. Do not leave the unit in a location near a heat source such as a radiator or air duct, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock. Allow adequate air circulation to prevent internal heat build up. Do not place the unit on a surface (a rug, a blanket, etc.) or near materials (a curtain) which might block the ventilation holes. Should any solid object or liquid fall into the unit, unplug the unit and have it checked by qualified personnel before operating it any further.©2011 Sony Corporation Printed in ChinaHID-B70Owner’s RecordThe model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product.Model No. HID-Serial No.Model No. AC-Serial No.
HID-B70_4-281-390-11(3)_USSupported Photo formatsJPEG Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 formatSupported Audio formatsMPEG-Layer III(MP3)*Stereo/Mono(2.0 audio profile)Available sample rates: 32/44.1/48 KHzAvailable bit rates:32/40/48/56/64/80/96/112/128/160/192/224/256/320 kbit/s* MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thompson.* ID3 tag support for only ISO-8859-1.Wireless SpecificationsCompliance IEEE 802.11 b/g/nFrequency Range 2400~2483.5 MHzData Rates IEEE 802.11b: 1/2/5.5/11 MbpsIEEE 802.11g: 6/9/12/18/24/36/48/54 MbpsIEEE 802.11n: Up to 150 MbpsAC adaptorPower requirements100 V to 240 V, 50 Hz/60 Hz 0.4 ARated output voltage 12 V 1.5 ADimensionsApprox. 63.9 mm × 49.5 mm × 29.5 mm (2 5/8 × 2 × 1 3/16 inches)MassApprox. 110 g (3 7/8 oz)See the label of AC adaptor for more details.Built-in batteryThe unit has a built-in battery.When you use the unit only with the built-in battery, it runs for about 60 minutes, depending on operating and environmental conditions. Charging a fully discharged battery will take approximately 180 minutes. We recommend that you use the unit with the AC power adapter connected.Design and specifications are subject to change without notice. Notices and Licenses for Excluded Software Used in this DeviceThird party software is used in this device. Such third party software may change over time. Please visit http://www.sony.net/Products/Linux/ for (i) an up-to-date list of the third party software included in each version of the device; (ii) the license terms applicable thereto; and (iii) where required, the source code associated therewith and available for download.This product contains software that is subject to the following GNU General Public License (hereinafter referred to as “GPL”) or GNU Lesser General Public License (hereinafter referred to as “LGPL”). These establish that customers have the right to acquire, modify, and redistribute the source code of said software in accordance with the terms of the GPL or LGPL supplied.The source code for the above-listed software is available on the Web.To download, please access the following URL then select the model name “dash.”URL: http://www.sony.net/Products/Linux/Please note that Sony cannot answer or respond to any inquiries regarding the content of the source code. To clean the casing, use a soft cloth dampened with a mild detergent solution. When cleaning, unplug the unit.If you have any questions or problems concerning your unit, please contact Sony customer support.Notes on LCD screen The displayed image on the screen is not identical in picture quality and colors with the printed image because phosphor methods or profiles differ. Please regard the displayed image as just a reference. Do not press against the LCD screen with excessive force. The screen may be discolored and that may cause a malfunction. Exposing the LCD screen to direct sunlight for long periods may cause malfunction. The LCD screen is manufactured using extremely high-precision technology, so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen. These points are normal in the manufacturing process and do not affect the operation in any way. Images may trail across on the LCD screen in a cold location. This is not a malfunction.Additional InformationWireless NetworkIf unable to establish a reliable connection to the wireless router, please check the following items. The wireless router is on. You are connected to the Internet. The network settings are correct. The device is in a location with a strong wireless signal. See http://www.sony.com/dashsupport for a complete network troubleshooting guide.No picture Make sure the unit’s AC power adaptor cord is connected securely to the DC IN jack. Make sure the AC power adaptor cord is connected to the wall socket securely.No sound/Poor sound Good picture, no sound - Check the volume control. Disconnect your headphones. Quality depends on content provided by the sound content provider as well as your connected bandwidth. Check the file you are playing is a supported audio format. The dash unit may not be compatible with headphones with a microphone.General In the event of a power failure the alarm functions will not work if the battery is not charged. The unit will not play music files that contain copy protection.SpecificationsMain unitLCD screenLCD panel: 18 cm/7 inches800 × 480 resolutionLCD backlight life20,000 hoursInput/Output connectorUSB (USB2.0 Mass Storage class)Headphone (3.5 mm Stereo mini jack)Audio Output powerMono Speaker 1.6 WPower requirementsDC IN jack, 12 VPower consumption5.7 W (normal operation)Operating temperature5 °C to 35 °C (41 °F to 95 °F)Dimensions (width/height/depth)Approx. 190.4 mm × 129.8 mm × 72 mm (7 1/2 × 5 1/8 × 2 7/8 inches)MassApprox. 0.57 kg (1 lb 4 1/8 oz) without AC adaptor
HID-B70/B74-281-387-11(3)HOME Screen and ControlsThe HOME screen can show an app channel, a clock, the weather, a photo viewer, or a music player depending on the theme you selected. To Change the ThemePress the MENU/SNOOZE button at the top of your dash to display the command bar, and tap , and then tap the theme you want to display.About the Command BarPress the MENU/SNOOZE button to bring up the command bar. From the command bar, you can operate or set your dash by tapping a menu item or icon.HintBy pressing the MENU/SNOOZE button (and tapping the HOME icon if the command bar is displayed), you can return to the HOME screen from any other screen.HintBy pressing the MENU/SNOOZE button (and tapping the HOME icon if the command bar is displayed), you can return to the HOME screen from any other screen.ɞ Command Barɟ Main MENUɠ Bookmark Selectorɡ Theme Selectorɢ App Selectorɣ Display Settingsɤ Sleep Timerɥ Night Modeɦ Muting On/Offɧ Audio Playerɨ HOMEɩ Battery Status (HID-B70 only)Set Alarms and ClocksTo Set up AlarmsPress the MENU/SNOOZE button to display the command bar, and then tap MENU - Clock & Weather-Alarms.Once the alarm setting screen is displayed, you can set a basic alarm.A basic alarm allows you to set up a repeating alarm. The alarm you set will repeat every day until you turn off that alarm.In the event of a power failure the alarm functions will not work until the power is restored. When you use the HID-B70, the alarm functions will work if there is battery power remaining.HintsThe MENU/SNOOZE button acts as a snooze button when an alarm is active.By tapping Advanced on the alarm setting screen, you can set advanced alarms. HintsThe MENU/SNOOZE button acts as a snooze button when an alarm is active.By tapping Advanced on the alarm setting screen, you can set advanced alarms. To Set up ClocksPress the MENU/SNOOZE button to display the command bar, and then tap MENU - Clock & Weather - Time/Date.You can set up two clocks for different time zones.Add Apps and Edit ChannelsWhat are Apps?Apps are mini-applications that run on your dash.By adding new apps, you can customize your dash.What is a Channel?A channel is a customized playlist of apps that you can edit/create. You can select a channel to be displayed on your dash.Here we explain how to add new apps to your dash and display them.Step1: Selecting the Channel to Add Apps to1Press the MENU/SNOOZE button to display the command bar.2Tap MENU - Themes & Apps - Edit Channels.3Tap the channel to which you want to add apps.HintYou can create a new channel by tapping New.Step2 : Adding Apps to the Channel1Tap Add Apps.2Tap the category, and then tap the app you want to add to the channel.3Tap Add.Step3 : Selecting the Channel to be Displayed1 Press the MENU/SNOOZE button to display the command bar.2Tap MENU - Themes & Apps-Change Channels.3Tap the channel you want to display on your dash.4Tap Set.Now the apps you have added are displayed on your dash.HintsYou can also add apps to a channel by tapping on the command bar, selecting the channel from the dropdown list on the upper-right corner of the screen, and then tapping Add Apps.To delete apps from a channel, after step 3 of “Step 1: Selecting the Channel to Add Apps to,” tap the app you want to delete, and then tap Delete.To customize the title or duration of time the app is to be played, after step 3 of “Step 1: Selecting the Channel to Add Apps to,” tap the desired app, and then tap Customize.To rearrange the order in which apps appear, go to www.sony.com/mydash, and edit the channels from the website.Add Apps and Edit Channels (continued)Information Alarm ClockHID-B70/B7Quick Start Guide
HID-B70/B74-281-387-11(3)Screen images are simulated.Product appearance may vary slightly from the images shown.Sony, Personal Space, dash, the dash logo, and the Sony make.believe logo are trademarks of Sony Corporation.All other trademarks are trademarks of their respective owners.Welcome FAQ, Registration, and SupportHelpful Hints and TroubleshootingIf you are unable to establish a reliable connection to your wireless network, please check the following items.Check to make sure the wireless router is ON.Check to make sure the wireless router is connected to the Internet.Check to make sure the network settings are correct.Check to make sure your dashis located near the router so it receives a strong wireless signal.Note on Disposing of your dashBefore disposing of your dash or transferring it to somebody else, make sure to unregister the dashbeforehand.To unregister your dash, press the MENU/SNOOZE button to display the command bar, and tap MENU - System - Device info, and then tap Unregister on the screen displayed.Registration and SupportYou can also register your device from a computer.To register your device, visit:http://www.sony.com/mydashFor further assistance and FAQs visit:http://www.sony.com/dashsupportor call Sony at the following number:For customers in the U.S.A.: 1-866-918-2485Parts and ControlsChecking Supplied Accessoriesdash Information Alarm Clock (HID-B70/B7) (1)Cord Holder (HID-B70 only) (1)AC Power Adaptor (1)Quick Start Guide (1)Important Information Guide (1)Limited Warranty Card (1)End User License Agreement (1)NotesThe dash (HID-B70 only) has a built-in battery that allows you to move it from one room in your home to another without turning off the power. The battery power lasts long enough for you to plug it into a power source at the new location.The screen orientation automatically flips when your dash is moved to the horizontal position.Tap the touchscreen with your fingertip to control it.Initial SetupTo set up your dash, you need a wireless network connected to the Internet.If your access point supports WPS (Wi-Fi Protected Setup), you can set up the wireless network connection using WPS.If the access point does not support WPS, you need to know your access point SSID (network name) and passphrase (security key) to set up the wireless network connection.2Press the Æ (on/standby) button to turn on your dash.3Watch the tutorial video played back automatically.4Follow the instruction on the screen to perform the calibration.5Select your zone from the cities listed.6Follow the steps on the screen to connect your dash to your wireless network.If your access point supports WPS, you can use WPS to set up the wireless network connection.If the access point does not support WPS, select your network by its SSID, and enter the required passphrase.Initial Setup (continued)7Set a question that must be answered correctly to prevent your dash settings from being changed by other people.8Follow the steps on the screen to register your dash.9Select the theme you want to display from the list.HintThemes determine the background, layout, and features of the HOME screen. You can select a different theme at any time.Once connected, you may be prompted to undergo a software update. It is recommended that you accept the update. The initial update may take from 10 to 30 minutes, depending on your network connection.HintYou can also register your dash from the following website.http://www.sony.com/mydashNow the setup of your dash is complete.On the reverse side of this Quick Start Guide, you can see how to use alarms or add apps.For more detailed information or tips on advanced use of your dash, visit the online help guide.http://www.sony.com/dashsupportMENU/SNOOZEButtonÆ (on/standby) Button*VOL (Volume)+/– ButtonsUSB PortHeadphone JackTouchscreenPower/StandbyIndicatorDC IN JackRESET Button©2011 Sony Corporation Printed in China4-281-387-11(3)NotesA wall socket should be as close as possible to your dash and easily accessible.Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.1Connect your dash to an AC outlet using the supplied AC power adaptor.Thank you for choosing the dash™ Information Alarm Clock.Please understand the overview of dash. Alarm & WeatherSimply glance to check time and weather forecast. Free AppYou can download more than 1,000 free Apps and enjoy each function.You need to register your dash to download Apps. Music & PhotoYou can enjoy a variety of internet radio and photo on the internet. PersonalizeYou can customize the contents your dash shows and set channel according to your lifestyle.DC IN jackAC adaptorTo an AC outletCord Holder(HID-B70 only)* To put your dash into the standby mode, hold the Æ (on/standby) button until the screen turns off.

Navigation menu