Sony Group GTKXB90 Home Audio System User Manual 010COV indb

Sony Corporation Home Audio System 010COV indb

Contents

TempConfidential_GTK-XB90-_manal UC2 Fred_Fabio_IM_UC2_4697227111_c2 2017-03-17

GTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90Home Audio SystemSystème audio de salonOperating Instructions GBMode d’emploi FRManual de instrucciones ES4-697-227-11(1)©2017 Sony CorporationPrinted in China/Imprimé en Chine
2GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)WARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc.Do not expose the appliance to naked flame sources (for example, lighted candles).To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance.As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire.The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off.Indoor use only.Notice for the customers in the USAOwner’s RecordThe model and serial numbers are located on the rear of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.Model No.                                      Serial No.                                      Important Safety Instructions1)  Read these instructions.2)  Keep these instructions.3)  Heed all warnings.4)  Follow all instructions.5)  Do not use this apparatus near water.6)  Clean only with dry cloth.7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8)  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11)  Only use attachments/accessories specified by the manufacturer.12)  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13)  Unplug this apparatus during lightning storms or when unused for long periods of time.14)  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
3GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Important Safety Instructions1)  Read these instructions.2)  Keep these instructions.3)  Heed all warnings.4)  Follow all instructions.5)  Do not use this apparatus near water.6)  Clean only with dry cloth.7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8)  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11)  Only use attachments/accessories specified by the manufacturer.12)  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13)  Unplug this apparatus during lightning storms or when unused for long periods of time.14)  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.CAUTIONYou are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE).For customers in CanadaThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1)  This device may not cause interference; and(2)  This device must accept any interference, including interference that may cause undesired operation of the device.This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE).GB
4GBGTK-XB60/XB90.4-697-227-11(1)This system is designed to be used for the following purposes: • Playing back music sources on USB devices or BLUETOOTH devices • Enjoying social gatherings with the “Party Chain” or speaker add functionAbout this manual • Some illustrations are presented as conceptual drawings, and may be different from the actual products. • The instructions in this manual are for models GTK-XB60 and GTK-XB90. The GTK-XB60 is used for illustrative purposes unless otherwise noted.
5GBGTK-XB60/XB90.4-697-227-11(1)Table of ContentsAbout this manual ..................... 4Guide to parts and controls ......6Getting StartedTurning on the system ............ 10Carrying the system ................ 10Placing the system  horizontally ............................... 11About the power  management ............................ 11Charging the battery ................ 11USB DeviceBefore using the USB device ....13Playing a file .............................13BLUETOOTH connectionPairing this system with a BLUETOOTH device ...................15One Touch BLUETOOTH Connection by NFC ...................17Listening to music on a BLUETOOTH device .................. 18About the BLUETOOTH  wireless technology .................20Playing back with high quality sound codec (AAC/LDAC™) ....20Setting the BLUETOOTH  standby mode ..........................21Turning on or off the  BLUETOOTH signal ....................21Using “Sony | Music Center”  and “Fiestable” via  BLUETOOTH connection .......... 22Sound AdjustmentAdjusting the sound ................ 23Other OperationsEnjoying wired playback using multiple systems (Wired Party Chain function) ........................ 24Enjoying wireless playback  using multiple systems  (Wireless Party Chain  function) .................................. 27Listening to music wirelessly with two systems (Speaker  add function) ........................... 28Enjoying music with the  Speaker Lights .........................30Enjoying hands-free calls ........30Using an optional  equipment ................................31Using an optional  microphone ............................. 32Setting the automatic  standby function ..................... 32Saving the battery power ........ 32Additional InformationInformation about  compatible devices ................. 33Troubleshooting ...................... 33Precautions .............................. 37Specifications ...........................39License and Trademark  Notice ....................................... 41
6GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Guide to parts and controlsGTK-XB60TopRear*  Do not look directly at the light-emitting parts when the Speaker Lights are turned on.Speaker Lights* (page30)GTK-XB90Speaker Lights* (page30)TopRear*  Do not look directly at the light-emitting parts when the Speaker Lights are turned on.
7GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Guide to parts and controlsGTK-XB60TopRear*  Do not look directly at the light-emitting parts when the Speaker Lights are turned on.GTK-XB90Speaker Lights* (page30)TopRear*  Do not look directly at the light-emitting parts when the Speaker Lights are turned on.
8GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)  (power) buttonPress to turn on or off the system. (power) indicator — Lights up in green while the system is turned on. — Lights up in amber while the system is turned off, and when the BLUETOOTH standby mode is turned on.CHARGE indicator (page11)Lights up in amber while the battery is charging.  (play/pause)/  (call)* button  — Press to play/pause music. — Press to receive/end a call when using the hands-free call function with your BLUETOOTH-connected mobile phone (page30).  Built-in microphone STAMINA   BATTERY button — Press to turn on the power-saving mode (STAMINA mode) when using the built-in battery (page32). — Hold down to check the remaining battery level (page12).STAMINA   BATTERY indicatorLights up while STAMINA mode is active (page32). FUNCTION   PAIRING button — Press repeatedly to select the BLUETOOTH, USB or Audio In function. — When the BLUETOOTH function is selected, hold down to activate BLUETOOTH pairing. — Press to stop the built-in sound demonstration.  (BLUETOOTH) indicator (page20)USB indicator (page13)AUDIO IN indicator (page31)    (N-Mark) (page17)ADD button (page28)ADD L/R indicators (page28)  W.PARTY CHAIN   LIGHT button  — Press to turn the Wireless Party Chain function on (page27). — Hold down for more than 3seconds to turn the speaker lights on/off (page30).W.PARTY CHAIN   LIGHT indicatorLights up when the Wireless Party Chain function is in use (page27).EXTRA BASS button — Press to generate more dynamic sound (page23). — Hold down for more than 3seconds  while AC power cord is connected to play back the built-in sound demonstration.EXTRA BASS indicatorLights up when the EXTRA BASS function is turned on (page23).  Volume +*/– buttonsPress to adjust the volume.   (USB) portUse to connect a USB device.  AC IN jack (page10)  PARTY CHAIN button (page26)PARTY CHAIN indicator (page26)  MIC jack (page32)MIC LEVEL (MIN/MAX) knob (page32)  Audio output and input jacksUse an audio cord (not supplied) to make either connection as follows: •AUDIO/PARTY CHAIN OUT L/R jacks — Connect to the audio input jacks of an optional equipment. — Connect to another audio system to enjoy the Wired Party Chain function (page24). •AUDIO/PARTY CHAIN IN L/R jacks — Connect to the audio output jacks of a TV or an audio/video equipment. The sound is output through this system. — Connect to another audio system to enjoy the Wired Party Chain function (page24).  RESET button*  The /  button and the volume + button have a tactile dot. Use the tactile dot as a reference when operating the system.Indicator statusesThe statuses of the indicators on the unit are shown in the illustrations as follows.Indicator status IllustrationFlashingLit upTurned off
9GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)    (N-Mark) (page17)ADD button (page28)ADD L/R indicators (page28)  W.PARTY CHAIN   LIGHT button  — Press to turn the Wireless Party Chain function on (page27). — Hold down for more than 3seconds to turn the speaker lights on/off (page30).W.PARTY CHAIN   LIGHT indicatorLights up when the Wireless Party Chain function is in use (page27).EXTRA BASS button — Press to generate more dynamic sound (page23). — Hold down for more than 3seconds  while AC power cord is connected to play back the built-in sound demonstration.EXTRA BASS indicatorLights up when the EXTRA BASS function is turned on (page23).  Volume +*/– buttonsPress to adjust the volume.   (USB) portUse to connect a USB device.  AC IN jack (page10)  PARTY CHAIN button (page26)PARTY CHAIN indicator (page26)  MIC jack (page32)MIC LEVEL (MIN/MAX) knob (page32)  Audio output and input jacksUse an audio cord (not supplied) to make either connection as follows: •AUDIO/PARTY CHAIN OUT L/R jacks — Connect to the audio input jacks of an optional equipment. — Connect to another audio system to enjoy the Wired Party Chain function (page24). •AUDIO/PARTY CHAIN IN L/R jacks — Connect to the audio output jacks of a TV or an audio/video equipment. The sound is output through this system. — Connect to another audio system to enjoy the Wired Party Chain function (page24).  RESET button*  The /  button and the volume + button have a tactile dot. Use the tactile dot as a reference when operating the system.Indicator statusesThe statuses of the indicators on the unit are shown in the illustrations as follows.Indicator status IllustrationFlashingLit upTurned off
10GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Getting StartedTurning on the system1 Connect the AC power cord (supplied) to the AC IN jack on the rear of the unit, and then to the wall outlet.GTK-XB60GTK-XB90  AC power cord (supplied) To wall outletThe system is turned on in the demonstration mode and the demonstration starts automatically.2 Press  to turn on the system.The  indicator lights up in green.HintThe system can be used with the built-in battery instead of connecting the AC power cord (supplied) to a wall outlet if you have charged the battery before use. For details, see “Charging the battery” (page11).Deactivating the demonstrationHold down W.PARTY CHAIN   LIGHT for more than 3seconds while the demonstration is performed.The demonstration ends and the system enters the standby mode.When you hold down W.PARTY CHAIN  LIGHT during the standby mode, or when you disconnect and reconnect the AC power cord, the system enters the demonstration mode.Carrying the systemBefore carrying the system, disconnect all the cords.NoteCorrect hand placement while carrying the system is very important to avoid personal injury and/or property damage.Placing the system horizontallyYou can also place the system horizontally as illustrated below. (Place the rubber feet side down.)HintWhen you change the orientation of the system, the tweeters that output sound for the left and right channels are switched to the upper two units automatically (for GTK-XB90 only).About the power management • By default, this system is set to turn off automatically in about 15minutes when there is no operation, and no audio signal is detected. For details, see “Setting the automatic standby function” (page32). • You can reduce the power consumption using STAMINA mode. For details, see “Saving the battery power” (page32).
11GBGetting StartedGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Deactivating the demonstrationHold down W.PARTY CHAIN   LIGHT for more than 3seconds while the demonstration is performed.The demonstration ends and the system enters the standby mode.When you hold down W.PARTY CHAIN  LIGHT during the standby mode, or when you disconnect and reconnect the AC power cord, the system enters the demonstration mode.Carrying the systemBefore carrying the system, disconnect all the cords.NoteCorrect hand placement while carrying the system is very important to avoid personal injury and/or property damage.Placing the system horizontallyYou can also place the system horizontally as illustrated below. (Place the rubber feet side down.)HintWhen you change the orientation of the system, the tweeters that output sound for the left and right channels are switched to the upper two units automatically (for GTK-XB90 only).About the power management • By default, this system is set to turn off automatically in about 15minutes when there is no operation, and no audio signal is detected. For details, see “Setting the automatic standby function” (page32). • You can reduce the power consumption using STAMINA mode. For details, see “Saving the battery power” (page32).Charging the batteryThe system can be used with the built-in battery (rechargeable) instead of connecting the AC power cord to a wall outlet if the battery has been sufficiently charged.Connect the AC power cord (supplied) to the AC IN jack on the rear of the unit, and then to the wall outlet.GTK-XB90GTK-XB60 AC power cord (supplied) To wall outletThe CHARGE indicator will light up in amber. Charging will be completed in about 3.5 hours and the indicator will turn off.
12GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Notes • It may take longer to charge the battery depending on the conditions of use. • Even if you do not intend to use the system for a long time, charge the battery to its full capacity once every six months to maintain its performance.HintYou can operate the system while it is charging. Checking the battery level of the rechargeable batteryYou can check the remaining battery level via voice guidance when using the system with the built-in battery. You can also check the battery level using “Sony | Music Center” (page22).1 Press  to turn on the system.Make sure that the AC power cord is not connected to a wall outlet. You can only check the battery level when using the built-in battery.2 Hold down STAMINA   BATTERY.3 The voice guidance message is heard and the CHARGE indicator flashes as follows according to the remaining battery level. Message (battery level)Indicator flashes“Fully charged”(80% – 100%)4 times“About 70%”(60% – 79%)3 times“About 50%”(30% – 59%)2 times“About 20%”(11% – 29%)Once“Please charge”(less than 10%)ContinuouslyHint“Please charge” is output automatically when the remaining battery level is less than 10%. USB DeviceBefore using the USB deviceFor compatible USB devices, see “Information about compatible devices” (page33). When using Apple devices with this system, connect them via a BLUETOOTH connection (page15). Using Apple devices via a USB connection is not supported.Notes • When USB cable connection is necessary, use the USB cable supplied with the USB device. See the operating instructions supplied with the USB device for details on the operation method. • Do not connect the system and the USB device through a USB hub. • When the USB device is connected, the system reads all the files on the USB device. If there are many folders or files on the USB device, it may take a long time to finish reading the USB device. • With some connected USB devices, there may be a delay before an operation is performed by this system. • Compatibility with all encoding/writing software cannot be guaranteed. If audio files on the USB device were originally encoded with incompatible software, those files may produce noise or interrupted audio, or may not play at all. • This system does not necessarily support all the functions provided in a connected USB device.
13GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)USB Device3 The voice guidance message is heard and the CHARGE indicator flashes as follows according to the remaining battery level. Message (battery level)Indicator flashes“Fully charged”(80% – 100%)4 times“About 70%”(60% – 79%)3 times“About 50%”(30% – 59%)2 times“About 20%”(11% – 29%)Once“Please charge”(less than 10%)ContinuouslyHint“Please charge” is output automatically when the remaining battery level is less than 10%. USB DeviceBefore using the USB deviceFor compatible USB devices, see “Information about compatible devices” (page33). When using Apple devices with this system, connect them via a BLUETOOTH connection (page15). Using Apple devices via a USB connection is not supported.Notes • When USB cable connection is necessary, use the USB cable supplied with the USB device. See the operating instructions supplied with the USB device for details on the operation method. • Do not connect the system and the USB device through a USB hub. • When the USB device is connected, the system reads all the files on the USB device. If there are many folders or files on the USB device, it may take a long time to finish reading the USB device. • With some connected USB devices, there may be a delay before an operation is performed by this system. • Compatibility with all encoding/writing software cannot be guaranteed. If audio files on the USB device were originally encoded with incompatible software, those files may produce noise or interrupted audio, or may not play at all. • This system does not necessarily support all the functions provided in a connected USB device.To use the system as a battery chargerYou can use the system as a battery charger for USB devices that have a rechargeable function.Connect the USB device to the  (USB) port.The charging begins when the USB device is connected to the  (USB) port. For details, refer to the operating instructions of your USB device.Playing a fileThe following audio file formats are supported: —MP3: file extension “.mp3” —WMA: file extension “.wma”1 Press FUNCTION   PAIRING repeatedly until the USB indicator on the unit lights up.2 Connect the USB device to the  (USB) port.3 Press / to start playback.You can control playback operations and select music easily from a list of music on the USB device using “Sony | Music Center” (page22).4 Press the volume +/– buttons to adjust the volume.
14GBGTK-XB60/XB90.4-697-227-11(1)Other operationsTo Do thisPause playbackPress /. To resume play, press /  again.Play back the next songPress / twice.Play back the previous songPress / for three times.Notes • This system cannot play audio files on the USB device in the following cases; — when the total number of audio files on a USB device exceeds 999. — when the number of folders on a USB device exceeds 256 (including the “ROOT” folder and empty folders).These numbers may vary depending on the file and folder structure. Do not save other types of files or unnecessary folders on a USB device that has audio files. • The system can play back to a depth of 8 folders only. • Folders that have no audio files are skipped. • Note that even when the file name has the correct file extension, if the actual file differs, the system may emit noise or malfunction.
15GBBLUETOOTH connectionGTK-XB60/XB90.4-697-227-11(1)BLUETOOTH connection Pairing this system with a BLUETOOTH devicePairing is an operation in which BLUETOOTH devices register each other beforehand. Once the pairing operation has been performed, it does not need to be performed again for those devices. If your device is an NFC-compatible smartphone, the manual pairing procedure is not necessary. (See “One Touch BLUETOOTH Connection by NFC” (page17).)1 Place the BLUETOOTH device within 1meter (3 feet) from the system.2  Select the BLUETOOTH function. Press  to turn on the system.Press FUNCTION   PAIRING repeatedly until the (BLUETOOTH) indicator on the unit flashes slowly.HintWhen there is no pairing information on the system (for example, when you use the BLUETOOTH function for the first time after purchase), the (BLUETOOTH) indicator flashes quickly and the system enters the pairing mode automatically. In this case, proceed to step 4.3 Hold down FUNCTION   PAIRING for more than 3seconds.Voice guidance (“Bluetooth pairing”) will be output and the (BLUETOOTH) indicator will flash quickly.4 Turn on the BLUETOOTH function on the BLUETOOTH device.For details, refer to the operating instructions of your BLUETOOTH device.5 Select “GTK-XB60” or “GTK-XB90” on the display of the BLUETOOTH device.NoteIf passkey is required on the BLUETOOTH device, enter “0000.” “Passkey” may be called “Passcode,” “PIN code,” “PIN number,” or “Password.”Bluetoothpairing
16GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)One Touch BLUETOOTH Connection by NFCNFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as smartphones and IC tags. When you touch the system with an NFC-compatible smartphone, the system automatically: —turns on in the BLUETOOTH function. —completes the pairing and BLUETOOTH connection.Compatible smartphonesSmartphones with a built-in NFC function (OS: Android™ 2.3.3 or later, excluding Android 3.x)Notes • The system can only recognize and connect to one NFC-compatible smartphone at a time. If you try to connect another NFC-compatible smartphone to the system, the currently connected NFC-compatible smartphone will be disconnected. • Depending on your NFC-compatible smartphone, you may need to perform the following steps on your NFC-compatible smartphone in advance. — Turn on the NFC function. For details, refer to the operating instructions of the NFC-compatible smartphone. — If your NFC-compatible smartphone has an OS version that is older than Android 4.1.x, download and start the “NFC Easy Connect” application. “NFC Easy Connect” is a free application for Android smartphones that can be obtained from Google Play™. (The application may not be available in some countries/regions.)1 Turn on the NFC function of a BLUETOOTH device, such as a smartphone or tablet.6 Make sure that a BLUETOOTH connection has been established.Once a BLUETOOTH connection is established, the system will emit a notification sound, and the (BLUETOOTH) indicator on the unit will stop flashing and remain lit up.Depending on the BLUETOOTH device, connection may start automatically after pairing is completed.Notes • You can pair up to 8 BLUETOOTH devices. If the 9th BLUETOOTH device is paired, the oldest paired device will be deleted. • If you want to pair with another BLUETOOTH device, repeat steps 1 to 6. • If the last connected BLUETOOTH device is nearby, a BLUETOOTH connection will be established automatically and the BLUETOOTH indicator will light up. If you want to connect another BLUETOOTH device, turn off the BLUETOOTH function on the connected device or turn off the power on the connected device.To cancel the pairing operationPress FUNCTION   PAIRING.To terminate the BLUETOOTH connectionTurn off the BLUETOOTH function on the connected device.NoteDepending on the BLUETOOTH device, the BLUETOOTH connection may be terminated automatically when you stop playback.Erasing all the pairing registration informationTo erase all of the pairing registration information, the system needs to be restored to the factory default settings. See “Restoring the system to the factory default settings” (page37).NoteOnce all the pairing information on the system has been erased, iPhone/iPod touch may not be able to connect to the system. In this case, delete the pairing information for the system from iPhone/iPod touch, and then perform the pairing procedure again.
17GBBLUETOOTH connectionGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1) One Touch BLUETOOTH Connection by NFCNFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as smartphones and IC tags. When you touch the system with an NFC-compatible smartphone, the system automatically: —turns on in the BLUETOOTH function. —completes the pairing and BLUETOOTH connection.Compatible smartphonesSmartphones with a built-in NFC function (OS: Android™ 2.3.3 or later, excluding Android 3.x)Notes • The system can only recognize and connect to one NFC-compatible smartphone at a time. If you try to connect another NFC-compatible smartphone to the system, the currently connected NFC-compatible smartphone will be disconnected. • Depending on your NFC-compatible smartphone, you may need to perform the following steps on your NFC-compatible smartphone in advance. — Turn on the NFC function. For details, refer to the operating instructions of the NFC-compatible smartphone. — If your NFC-compatible smartphone has an OS version that is older than Android 4.1.x, download and start the “NFC Easy Connect” application. “NFC Easy Connect” is a free application for Android smartphones that can be obtained from Google Play™. (The application may not be available in some countries/regions.)1 Turn on the NFC function of a BLUETOOTH device, such as a smartphone or tablet.2  Touch the BLUETOOTH device to the N-Mark on the unit until the BLUETOOTH device responds to the system.Complete the connection by following the instructions displayed on the BLUETOOTH device.When the BLUETOOTH connection is established, the   (BLUETOOTH) indicator on the unit stops flashing and remains lit.HintIf pairing and the BLUETOOTH connection fail, perform the following. — Remove the case from the smartphone if using a commercially available smartphone case. — Touch the smartphone to the N-Mark on the unit again. — Relaunch the “NFC Easy Connect” application. — Unlock the screen of the BLUETOOTH device.To cancel the pairing operationPress FUNCTION   PAIRING. To terminate the BLUETOOTH connectionTurn off the BLUETOOTH function on the connected device.NoteDepending on the BLUETOOTH device, the BLUETOOTH connection may be terminated automatically when you stop playback. Erasing all the pairing registration informationTo erase all of the pairing registration information, the system needs to be restored to the factory default settings. See “Restoring the system to the factory default settings” (page37).NoteOnce all the pairing information on the system has been erased, iPhone/iPod touch may not be able to connect to the system. In this case, delete the pairing information for the system from iPhone/iPod touch, and then perform the pairing procedure again.
18GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)2 Start playback of an audio source on the BLUETOOTH device.For details, refer to the operating instructions of your BLUETOOTH device.You can also use  / on the system to play back/pause the music.3 Adjust the volume.Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust the volume level on the system using the volume +/– buttons.BLUETOOTH deviceTo terminate the BLUETOOTH connectionTouch the BLUETOOTH device to the N-Mark on the unit again.Erasing all the pairing registration informationTo erase all of the pairing registration information, the system needs to be restored to the factory default settings. See “Restoring the system to the factory default settings” (page37).NoteOnce all the pairing information on the system has been erased, iPhone/iPod touch may not be able to connect to the system. In this case, delete the pairing information for the system from iPhone/iPod touch, and then perform the pairing procedure again.Listening to music on a BLUETOOTH deviceYou can enjoy listening to music on a connected BLUETOOTH device via the system using AVRCP.Check the following before playing music: —The BLUETOOTH function of the BLUETOOTH device is turned on. —Pairing has been completed (page15).1 Press FUNCTION   PAIRING repeatedly until the (BLUETOOTH) indicator on the unit lights up.The last connected BLUETOOTH device will be connected automatically.NoteIf the  (BLUETOOTH) indicator flashes, the BLUETOOTH connection hasn’t been established. In this case, complete the pairing procedure and establish a BLUETOOTH connection.
19GBBLUETOOTH connectionGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)2 Start playback of an audio source on the BLUETOOTH device.For details, refer to the operating instructions of your BLUETOOTH device.You can also use  / on the system to play back/pause the music.3 Adjust the volume.Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust the volume level on the system using the volume +/– buttons.BLUETOOTH deviceSwitching between BLUETOOTH devices connected to the system at the same time (Multipoint connection)Up to 3 BLUETOOTH devices can be connected to the system at the same time. While playing back an audio source from one of the connected devices, you can switch the BLUETOOTH input device by operating another connected device to start playback.Notes • You cannot use this function when using the hands-free call function, speaker add function, or Wireless Party Chain function. • Depending on the BLUETOOTH devices, you may not be able to make 3 BLUETOOTH connections at the same time. Listening to music on a BLUETOOTH deviceYou can enjoy listening to music on a connected BLUETOOTH device via the system using AVRCP.Check the following before playing music: —The BLUETOOTH function of the BLUETOOTH device is turned on. —Pairing has been completed (page15).1 Press FUNCTION   PAIRING repeatedly until the (BLUETOOTH) indicator on the unit lights up.The last connected BLUETOOTH device will be connected automatically.NoteIf the  (BLUETOOTH) indicator flashes, the BLUETOOTH connection hasn’t been established. In this case, complete the pairing procedure and establish a BLUETOOTH connection.
20GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)LDAC is an audio coding technology developed by Sony, that enables the transmission of High-Resolution (Hi-Res) Audio content, even over a BLUETOOTH connection. Unlike other BLUETOOTH compatible coding technologies, such as SBC, it operates without any down-conversion of the Hi-Res Audio content1). It also allows approximately three times more data2) than the other technologies, for transmitting over a BLUETOOTH wireless network with unprecedented sound quality using efficient coding and optimized data bundling.1)  Excluding DSD format contents.2)  In comparison with SBC (Sub Band Codec), when the bit rate of 990 kbps (96/48 kHz) or 909 kbps (88.2/44.1 kHz) is selected.About the BLUETOOTH wireless technologyBLUETOOTH wireless technology is a short-range wireless technology that enables wireless data communication between digital devices. BLUETOOTH wireless technology operates within a range of about 10 meters (33 feet).Supported BLUETOOTH version, profiles and codecsFor details, see “BLUETOOTH section” (page39). (BLUETOOTH) indicatorThe   (BLUETOOTH) indicator on the unit lights up or flashes in blue to show the BLUETOOTH status.System status Indicator statusBLUETOOTH standbyFlashing slowlyBLUETOOTH pairingFlashing quicklyBLUETOOTH connection is establishedLit upPlaying back with high quality sound codec (AAC/LDAC™)This system can receive data in the AAC or LDAC codec format from a BLUETOOTH device. It provides a playback with higher sound quality.You can select an audio codec option from the following two settings by using “Sony | Music Center” (page22). The default setting of this system is “AUTO.” • AUTO: The system detects the codec used on the source device and automatically selects the optimal codec from “SBC,” “AAC*” or “LDAC*.” • SBC: “SBC” is always applied regardless of the codec used on the source device.*  Available only when the codec is supported by your BLUETOOTH device.To apply the changes of the setting, you need to terminate the BLUETOOTH connection (page16), and then perform the BLUETOOTH connection again.NoteYou can enjoy higher sound quality when the source device is compatible with AAC/LDAC and this function is set to “AUTO.” However, the sound may be interrupted depending on the conditions of the BLUETOOTH communication. If this happens, set the function to “SBC.”
21GBBLUETOOTH connectionGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)LDAC is an audio coding technology developed by Sony, that enables the transmission of High-Resolution (Hi-Res) Audio content, even over a BLUETOOTH connection. Unlike other BLUETOOTH compatible coding technologies, such as SBC, it operates without any down-conversion of the Hi-Res Audio content1). It also allows approximately three times more data2) than the other technologies, for transmitting over a BLUETOOTH wireless network with unprecedented sound quality using efficient coding and optimized data bundling.1)  Excluding DSD format contents.2)  In comparison with SBC (Sub Band Codec), when the bit rate of 990 kbps (96/48 kHz) or 909 kbps (88.2/44.1 kHz) is selected.Setting the BLUETOOTH standby modeThe BLUETOOTH standby mode enables the system to turn on automatically when you establish the BLUETOOTH connection with a BLUETOOTH device. This setting is turned off by default.This setting can only be configured by using “Sony | Music Center.” For details on “Sony | Music Center,” see “Using “Sony | Music Center” and “Fiestable” via BLUETOOTH connection” (page22).NoteThe BLUETOOTH function can only be set to on while the AC power cord is connected.HintDisable the BLUETOOTH standby mode to reduce the power consumption in standby mode (eco mode).Turning on or off the BLUETOOTH signalYou can connect to the system from a paired BLUETOOTH device in all functions when the system’s BLUETOOTH signal is set to on. This setting is turned on by default.Hold down STAMINA   BATTERY and W.PARTY CHAIN   LIGHT for more than 5 seconds to turn off the BLUETOOTH signal.AUDIO IN indicator will flash once.Notes • You cannot perform the following operations when you turn off the BLUETOOTH signal: — Pairing and/or connecting with BLUETOOTH device — Using “Sony | Music Center” via BLUETOOTH connection • To turn on the BLUETOOTH signal, repeat the procedure shown above. When the BLUETOOTH signal turns on, the AUDIO IN indicator flashes 3 times.Playing back with high quality sound codec (AAC/LDAC™)This system can receive data in the AAC or LDAC codec format from a BLUETOOTH device. It provides a playback with higher sound quality.You can select an audio codec option from the following two settings by using “Sony | Music Center” (page22). The default setting of this system is “AUTO.” • AUTO: The system detects the codec used on the source device and automatically selects the optimal codec from “SBC,” “AAC*” or “LDAC*.” • SBC: “SBC” is always applied regardless of the codec used on the source device.*  Available only when the codec is supported by your BLUETOOTH device.To apply the changes of the setting, you need to terminate the BLUETOOTH connection (page16), and then perform the BLUETOOTH connection again.NoteYou can enjoy higher sound quality when the source device is compatible with AAC/LDAC and this function is set to “AUTO.” However, the sound may be interrupted depending on the conditions of the BLUETOOTH communication. If this happens, set the function to “SBC.”
22GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Sound Adjustment Adjusting the soundTo Do thisAdjust the volumePress the volume +/– buttons.Generate a more dynamic sound Press EXTRA BASS.The EXTRA BASS indicator lights up in red while the EXTRA BASS function is turned on. Using “Sony | Music Center” and “Fiestable” via BLUETOOTH connectionAbout AppYou can control the system more flexibly and enjoy it in new ways using the free Apps “Sony | Music Center” and “Fiestable” on your smartphone/iPhone. “Sony | Music Center” and “Fiestable” are available in both Google Play and the App Store.1 Search for “Sony | Music Center” and download the App to your smartphone/iPhone.You can also download the App by scanning the two-dimensional code below. 2 Establish a BLUETOOTH connection between the system and your smartphone/iPhone.For details on BLUETOOTH connection, see “Pairing this system with a BLUETOOTH device” (page15) or “One Touch BLUETOOTH Connection by NFC” (page17).3 Launch “Sony | Music Center” and download “Fiestable.”You can also download “Fiestable” from the App Store or Google Play.What you can do with “Sony | Music Center”: • Play back music on a USB device and set play modes • Balance the sound using preset EQs or custom EQs • Change the sound effect using DJ EFFECT • Control multiple systems when using the Wireless Party Chain or speaker add function  • Check the battery level • Configure the various settings for the systemWhat you can do with “Fiestable”: • DJ Control • Illumination • Motion Control Refer to “Sony | Music Center” Help for more details.http://xxxxxxxxxxxxxxxxxxxxxxNotes • If the “Sony | Music Center” application does not work properly, terminate the BLUETOOTH connection (page16), then perform the BLUETOOTH connection again so that the BLUETOOTH connection functions normally.  • What you can control with “Sony | Music Center” varies depending on the connected device. • The specification and design of the application may change without notice.dummydummy
23GBSound AdjustmentGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Sound AdjustmentAdjusting the soundTo Do thisAdjust the volumePress the volume +/– buttons.Generate a more dynamic soundPress EXTRA BASS.The EXTRA BASS indicator lights up in red while the EXTRA BASS function is turned on.3 Launch “Sony | Music Center” and download “Fiestable.”You can also download “Fiestable” from the App Store or Google Play.What you can do with “Sony | Music Center”: • Play back music on a USB device and set play modes • Balance the sound using preset EQs or custom EQs • Change the sound effect using DJ EFFECT • Control multiple systems when using the Wireless Party Chain or speaker add function  • Check the battery level • Configure the various settings for the systemWhat you can do with “Fiestable”: • DJ Control • Illumination • Motion Control Refer to “Sony | Music Center” Help for more details.http://xxxxxxxxxxxxxxxxxxxxxxNotes • If the “Sony | Music Center” application does not work properly, terminate the BLUETOOTH connection (page16), then perform the BLUETOOTH connection again so that the BLUETOOTH connection functions normally.  • What you can control with “Sony | Music Center” varies depending on the connected device. • The specification and design of the application may change without notice.
24GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Other OperationsEnjoying wired playback using multiple systems (Wired Party Chain function)You can connect multiple audio systems in a chain to create a more interesting party environment and to produce higher sound output.An activated system in the chain will be the “Party Host” and share the music. Other systems will become “Party Guests” and play the same music as that being played by the “Party Host.”Setting up the Wired Party ChainSet up a Wired Party Chain by connecting all the systems using audio cords (not supplied).Before connecting the cords, be sure to turn off the system and disconnect the AC power cord.  If all the systems are equipped with the Wired Party Chain function Second systemLast systemContinue the connection until the last system.Example: When connecting using this system as the first systemFirst system • Any system can become a Party Host. You can change the Party Host to another system in the chain. For details, see “To select a new Party Host” (page26). • Make sure that the  (BLUETOOTH) function or USB function is selected. When the Audio In function is selected, this feature cannot be used.NoteYou do not need to connect the last system to the first system. In this case, only the first system can become a Party Host.  If one of the systems is not equipped with the Wired Party Chain functionSecond systemLast systemContinue the connection until the last system.Connect the system that is not equipped with the Wired Party Chain function as the last system. Be sure to select the Audio In function on the last system. In this configuration, the sound from the last system may lag behind others.Example: When connecting using this system as the first systemFirst system • The last system is not connected to the first system. • You must select the first system as Party Host so that all systems are playing the same music when Wired Party Chain function is activated.
25GBOther OperationsGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Other OperationsEnjoying wired playback using multiple systems (Wired Party Chain function)You can connect multiple audio systems in a chain to create a more interesting party environment and to produce higher sound output.An activated system in the chain will be the “Party Host” and share the music. Other systems will become “Party Guests” and play the same music as that being played by the “Party Host.”Setting up the Wired Party ChainSet up a Wired Party Chain by connecting all the systems using audio cords (not supplied).Before connecting the cords, be sure to turn off the system and disconnect the AC power cord.  If all the systems are equipped with the Wired Party Chain function Second systemLast systemContinue the connection until the last system.Example: When connecting using this system as the first systemFirst system • Any system can become a Party Host. You can change the Party Host to another system in the chain. For details, see “To select a new Party Host” (page26). • Make sure that the  (BLUETOOTH) function or USB function is selected. When the Audio In function is selected, this feature cannot be used.NoteYou do not need to connect the last system to the first system. In this case, only the first system can become a Party Host.  If one of the systems is not equipped with the Wired Party Chain functionSecond systemLast systemContinue the connection until the last system.Connect the system that is not equipped with the Wired Party Chain function as the last system. Be sure to select the Audio In function on the last system. In this configuration, the sound from the last system may lag behind others.Example: When connecting using this system as the first systemFirst system • The last system is not connected to the first system. • You must select the first system as Party Host so that all systems are playing the same music when Wired Party Chain function is activated.
26GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Enjoying the Wired Party Chain1 Turn on all the systems.2 Adjust the volume on each system.3 Activate the Wired Party Chain function on the system to be used as the Party Host.Example: When using this system as the Party HostPress FUNCTION   PAIRING repeatedly to select the function you want.When you connect using  (page24), do not select the Audio In function. If you select this function, sound cannot be output.Start playback and then press PARTY CHAIN on the rear of the unit.The PARTY CHAIN indicator lights up. The Party Host starts the Wired Party Chain, and other systems become Party Guests automatically. All systems play the same music as that being played by the Party Host.Notes • Depending on the total unit of systems you have connected, Party Guests may take some time to start playing the music. • Changing the volume level and sound effect on the Party Host will not affect the output on the Party Guests. • For detailed operation on other systems, refer to the operating instructions of the systems.To select a new Party HostOnly when you connect using  (page24), you can select a new Party Host. Repeat step 3 of “Enjoying the Wired Party Chain” on the system to be used as a new Party Host. The current Party Host becomes Party Guest automatically. All systems play the same music as that being played by the new Party Host.Notes • You can select another system as the new Party Host only after the Wired Party Chain function of all the systems in the chain has been activated. • If the selected system does not become a new Party Host after a few seconds, repeat step 3 of “Enjoying the Wired Party Chain.”To deactivate the Wired Party ChainPress PARTY CHAIN on the Party Host.NoteIf the Wired Party Chain function is not deactivated after a few seconds, press PARTY CHAIN on the Party Host again.Party Chain indicatorThe PARTY CHAIN indicator on the unit lights up or flashes to show the system status.System status Indicator statusParty Host Lit upParty Guest FlashingEnjoying wireless playback using multiple systems (Wireless Party Chain function)You can connect multiple audio systems in a chain via BLUETOOTH connection if all the systems are equipped with the Wireless Party Chain function. This function allows you to create a more exciting party environment and to produce higher sound output without a cable connection.The first system in the chain to be activated becomes the “Party Host” and shares the music. Other systems become “Party Guests” and play the same music as that being played by the “Party Host.”Setting up and enjoying the Wireless Party ChainExample: setting the GTK-XB60 or GTK-XB90 as the first system (Party Host)1 Set the first system as the Party Host. Press FUNCTION   PAIRING repeatedly until the (BLUETOOTH) indicator lights up. Connect the BLUETOOTH device to the system via BLUETOOTH connection. Press W.PARTY CHAIN   LIGHT on the unit.The W.PARTY CHAIN   LIGHT indicator will start flashing and the system will enter the Wireless Party Chain mode.
27GBOther OperationsGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)To select a new Party HostOnly when you connect using  (page24), you can select a new Party Host. Repeat step 3 of “Enjoying the Wired Party Chain” on the system to be used as a new Party Host. The current Party Host becomes Party Guest automatically. All systems play the same music as that being played by the new Party Host.Notes • You can select another system as the new Party Host only after the Wired Party Chain function of all the systems in the chain has been activated. • If the selected system does not become a new Party Host after a few seconds, repeat step 3 of “Enjoying the Wired Party Chain.”To deactivate the Wired Party ChainPress PARTY CHAIN on the Party Host.NoteIf the Wired Party Chain function is not deactivated after a few seconds, press PARTY CHAIN on the Party Host again.Party Chain indicatorThe PARTY CHAIN indicator on the unit lights up or flashes to show the system status.System status Indicator statusParty Host Lit upParty Guest FlashingEnjoying wireless playback using multiple systems (Wireless Party Chain function)You can connect multiple audio systems in a chain via BLUETOOTH connection if all the systems are equipped with the Wireless Party Chain function. This function allows you to create a more exciting party environment and to produce higher sound output without a cable connection.The first system in the chain to be activated becomes the “Party Host” and shares the music. Other systems become “Party Guests” and play the same music as that being played by the “Party Host.”Setting up and enjoying the Wireless Party ChainExample: setting the GTK-XB60 or GTK-XB90 as the first system (Party Host)1 Set the first system as the Party Host. Press FUNCTION   PAIRING repeatedly until the (BLUETOOTH) indicator lights up. Connect the BLUETOOTH device to the system via BLUETOOTH connection. Press W.PARTY CHAIN   LIGHT on the unit.The W.PARTY CHAIN   LIGHT indicator will start flashing and the system will enter the Wireless Party Chain mode.2 Set the second system as a Party Guest. Press FUNCTION   PAIRING on the second system repeatedly until the  (BLUETOOTH) indicator lights up. Press W.PARTY CHAIN   LIGHT on the second system.The second system will be set as a Party Guest. Make sure that the W.PARTY CHAIN   LIGHT indicators on both the Party Host and Party Guest stop flashing and remain lit up.NoteThe Wireless Party Chain function is canceled in the following situations. — There is no operation within 1minute after the Party Host is set in step 1. — W.PARTY CHAIN   LIGHT is pressed on the Party Host before step 2 is completed.3 Set the third or more systems as Party Guests.Repeat step 2.4 Start playing back an audio source on the Party Host.To deactivate the Wireless Party ChainPress W.PARTY CHAIN   LIGHT on the Party Host.HintTo deactivate only one of the Party Guests and keep the rest of the Wireless Party Chain, press W.PARTY CHAIN   LIGHT on the Party Guest you want to deactivate.Wireless Party Chain indicatorThe W.PARTY CHAIN   LIGHT indicator on the unit lights up or flashes to show the system status.System status Indicator statusParty Host Lit upParty Guest Flashing
28GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Listening to music wirelessly with two systems (Speaker add function)To use this function, two GTK-XB60/XB90 systems are required. By connecting two GTK-XB60/XB90 systems via BLUETOOTH wireless technology, you can enjoy music in a more powerful way. You can also select an audio output between double mode (in which the two systems play the same sound) and stereo mode (stereo sound).In the following steps, the two systems are described as “system ” (or master system) and “system .”Activating the speaker add function1 Bring two GTK-XB60/XB90 systems within 1 meter (3 feet) of each other. 2 Press FUNCTION   PAIRING on system  repeatedly until the  (BLUETOOTH) indicator on the unit lights up.3 Press ADD on system . The ADD L/R indicators will flash and the system will enter the speaker add mode.4 Press FUNCTION   PAIRING on system  repeatedly until the  (BLUETOOTH) indicator on the unit lights up.5 Press ADD on system . The ADD L/R indicators on the unit will flash. Then the L/R indicators on both systems change their status from flashing to lit while the (BLUETOOTH) indicator on system  is turned off.HintWhen the connection by the speaker add function is established very quickly, the L/R indicators on system  may light up directly without flashing.6 Hold down ADD on system  repeatedly to select the output mode. The ADD L/R indicators on both systems show the current output mode.Each time you hold down ADD, the output mode changes as follows. : Stereo mode (R ch/L ch) : Stereo mode (L ch/R ch) :  Double mode(stereo/stereo)HintTo change the output mode, operate system  (master system), on which you have activated the speaker add mode.
29GBOther OperationsGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)4 Press FUNCTION   PAIRING on system  repeatedly until the  (BLUETOOTH) indicator on the unit lights up.5 Press ADD on system . The ADD L/R indicators on the unit will flash. Then the L/R indicators on both systems change their status from flashing to lit while the (BLUETOOTH) indicator on system  is turned off.HintWhen the connection by the speaker add function is established very quickly, the L/R indicators on system  may light up directly without flashing.6 Hold down ADD on system  repeatedly to select the output mode. The ADD L/R indicators on both systems show the current output mode.Each time you hold down ADD, the output mode changes as follows. : Stereo mode (R ch/L ch) : Stereo mode (L ch/R ch) :  Double mode(stereo/stereo)HintTo change the output mode, operate system  (master system), on which you have activated the speaker add mode.Playing music with two systems1 Activate the pairing mode on system , and then perform the BLUETOOTH connection with a BLUETOOTH device. For details on the pairing, see “Pairing this system with a BLUETOOTH device” (page15) or “One Touch BLUETOOTH Connection by NFC” (page17).Make sure to pair the BLUETOOTH device with system  (master system).2 Start playback on the BLUETOOTH device, and adjust the volume. For details, see “Listening to music on a BLUETOOTH device” (page18).Volume adjustments made on either one of the systems are also reflected on the other system.Notes • If any other BLUETOOTH device(s), such as a BLUETOOTH mouse or BLUETOOTH keyboard, is connected to the BLUETOOTH device that is connecting with the system, there may be distorted sound or noise in the system output. In this case, terminate the BLUETOOTH connection between the BLUETOOTH device and other BLUETOOTH device(s). • If you reset one of the two systems while using the speaker add function, make sure to turn off the other system. If you do not turn off the other system before restarting the speaker add function, there may be problems in making a BLUETOOTH connection and outputting sound. To deactivate the speaker add functionPress ADD until the ADD L/R indicators are turned off.HintUnless you deactivate the function, the system will try to establish the last made connection next time you turn on the system.
30GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Enjoying music with the Speaker LightsThe Speaker Lights are turned on by default.You can also select various light modes such as the following by using “Sony | Music Center” (page22). • RAVE: a light mode suitable for dance music with a lot of flashing • CHILL: a light mode suitable for relaxing music • RANDOM FLASH OFF: a light mode without flash suitable for all music, including dance music • HOT: a light mode of warm color • COOL: a light mode of cool color • STROBE: a light mode with an electronic flash of white colorTo turn off the Speaker LightsHold down W.PARTY CHAIN   LIGHT.To turn on the Speaker Lights, hold down W.PARTY CHAIN   LIGHT again.NoteIf the illumination brightness is glaring, switch on the room lights or turn off the illumination.Enjoying hands-free callsYou can enjoy hands-free calls with a BLUETOOTH mobile phone that supports HFP (Hands-free Profile) or HSP (Headset Profile). Only normal calls are supported. Calls via LINE, Skype, and other apps are not supported.To use this function, make sure that a BLUETOOTH connection has been established.Receiving a call1 Press /  when a call is incoming.When an incoming call arrives, playback pauses and the system emits a ring tone.GTK-XB60 GTK-XB90Built-in microphoneNoteIf you hold down /  when a call is incoming, the call will be rejected. 2 Talk into the system’s built-in microphone.3 Press /  to end the call.Making a call1 Make a call by operating the connected BLUETOOTH mobile phone.When you make a call, playback will pause and the system will emit a dial tone. 2 Talk into the system’s built-in microphone when the other party answers the call.3 Press /  to end the call.NoteIf you hold down /  while talking, the phone call output will be switched from the system to the speaker on your mobile phone.Hints • If your BLUETOOTH mobile phone supports both HFP and HSP, set it to HFP. • If you were listening to music before the call, playback will resume when the call ends. • Operations may vary depending on the BLUETOOTH mobile phone. Refer to the operating instructions for your mobile phone.
31GBOther OperationsGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Enjoying hands-free callsYou can enjoy hands-free calls with a BLUETOOTH mobile phone that supports HFP (Hands-free Profile) or HSP (Headset Profile). Only normal calls are supported. Calls via LINE, Skype, and other apps are not supported.To use this function, make sure that a BLUETOOTH connection has been established.Receiving a call1 Press /  when a call is incoming.When an incoming call arrives, playback pauses and the system emits a ring tone.GTK-XB60 GTK-XB90Built-in microphoneNoteIf you hold down /  when a call is incoming, the call will be rejected. 2 Talk into the system’s built-in microphone.3 Press /  to end the call.Making a call1 Make a call by operating the connected BLUETOOTH mobile phone.When you make a call, playback will pause and the system will emit a dial tone. 2 Talk into the system’s built-in microphone when the other party answers the call.3 Press /  to end the call.NoteIf you hold down /  while talking, the phone call output will be switched from the system to the speaker on your mobile phone.Hints • If your BLUETOOTH mobile phone supports both HFP and HSP, set it to HFP. • If you were listening to music before the call, playback will resume when the call ends. • Operations may vary depending on the BLUETOOTH mobile phone. Refer to the operating instructions for your mobile phone.Using an optional equipment1 Connect an optional equipment (i.e. WALKMAN®, smartphone, TV, DVD player, IC recorder, etc.) to the AUDIO/PARTY CHAIN IN L/R jacks on the unit using an audio cord (not supplied).2 Press FUNCTION   PAIRING repeatedly until the AUDIO IN indicator on the unit lights up.3 Start playback on the connected equipment.4 Adjust the volume.Adjust the volume of the connected equipment first. If the volume level is still too low, adjust the volume level on the system using the volume +/– buttons.NoteThe system may enter standby mode automatically if the volume level of the connected equipment is too low. In this case, increase the volume level of the equipment. To turn off the automatic standby function, see “Setting the automatic standby function” (page32).
32GBGTK-XB60/XB90.4-697-227-11(1)Using an optional microphoneYou can output your voice from the system by connecting a dynamic microphone with a normal plug (not supplied).1 Turn the MIC LEVEL knob to MIN to reduce the microphone volume level.2 Connect an optional microphone to the MIC jack on the unit.3 Adjust the volume using the MIC LEVEL knob.4 Speak or sing into the connected microphone.NoteWhen using the Wireless Party Chain or speaker add function, sound from the microphone is only output from the system to which the microphone is connected.Setting the automatic standby functionBy default, this system is set to turn off automatically in about 15 minutes when there is no operation or audio signal output.To turn off the function, hold down  for more than 3 seconds while the system is turned on.To turn on the function, repeat the procedure.You can also configure this setting and make sure whether this function is turned on or off by using “Sony | Music Center.” For details on “Sony | Music Center,” see “Using “Sony | Music Center” and “Fiestable” via BLUETOOTH connection” (page22).Notes • The system may enter standby mode automatically if the volume level of the connected equipment is too low. In this case, increase the volume level of the equipment.  • The system doesn’t enter standby mode when the MIC jack is in use.Saving the battery powerYou can save power and use the system for longer periods of time by turning on the STAMINA mode when using the system with the built-in battery (rechargeable). Press STAMINA   BATTERY to turn on the STAMINA mode.The STAMINA   BATTERY indicator will light up.To deactivate the function, press STAMINA   BATTERY again.
33GBAdditional InformationGTK-XB60/XB90.4-697-227-11(1)Additional InformationInformation about compatible devicesAbout supported USB devices • This system supports USB Mass Storage Class only. • This system supports FAT formatted USB devices only (except exFAT). • Some USB devices may not work with this system.About BLUETOOTH communication for iPhone and iPod touchMade for • iPhone 7 Plus • iPhone 7 • iPhone SE • iPhone 6s Plus • iPhone 6s • iPhone 6 Plus • iPhone 6 • iPhone 5s • iPhone 5c • iPhone 5 • iPhone 4s • iPod touch (6th generation) • iPod touch (5th generation)Websites for compatible devicesCheck the websites below for the latest information about compatible BLUETOOTH devices.For customers in the USA:http://esupport.sony.com/For customers in Canada:http://esupport.sony.com/CAFor customers in Europe:http://www.sony.eu/supportFor customers in Latin America:http://esupport.sony.com/LAFor customers in other countries/regions:http://www.sony-asia.com/supportTroubleshootingIf a problem occurs while operating the system, follow the steps described below before consulting your nearest Sony dealer. If an error message appears, be sure to make a note of the contents for reference.1 Check to see if the problem is listed in this “Troubleshooting” section.2 Check the following customer support websites.For customers in the USA:http://esupport.sony.com/For customers in Canada:http://esupport.sony.com/CAFor customers in Europe:http://www.sony.eu/supportFor customers in Latin America:http://esupport.sony.com/LAFor customers in other countries/regions:http://www.sony-asia.com/supportYou will find the latest support information and a FAQ at these websites.Note that if the service personnel changes some parts during repair, these parts may be retained.GeneralThe system does not turn on. • Check that the AC power cord is connected securely.The system has entered standby mode. • This is not a malfunction. The system enters standby mode automatically in about 15minutes when there is no operation or audio signal output (page32).
34GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Files cannot be played back. • USB devices formatted with file systems other than FAT16 or FAT32 are unsupported.* • If you use a partitioned USB device, only files on the first partition can be played back. • Files that are encrypted or protected by passwords cannot be played back. • Files with DRM (Digital Rights Management) copyright protection cannot be played back by this system.*  This system supports FAT16 and FAT32, but some USB storage devices may not support all of these FAT. For details, refer to the operating instructions of each USB storage device or contact the manufacturer.BLUETOOTH devicePairing cannot be performed. • Move the BLUETOOTH device closer to the system. • Pairing may not be possible if other BLUETOOTH devices are present around the system. In this case, turn off the other BLUETOOTH devices. • Make sure to enter the correct passkey when selecting the system’s name (this system) on the BLUETOOTH device.The BLUETOOTH device cannot detect the system. • Set the BLUETOOTH signal to on (page21).There is no sound. • Adjust the volume. • Check the connection of the optional equipment, if any. • Turn on the connected equipment. • Disconnect the AC power cord, then reconnect the AC power cord and turn on the system.There is severe hum or noise. • Move the system away from sources of noise. • Connect the system to a different wall outlet. • Install a noise filter (commercially available) to the AC power cord. • Turn off surrounding electrical equipment.There is acoustic feedback. • Reduce the volume.USB deviceThe connected USB device cannot be charged. • Make sure the USB device is connected securely.The USB device does not work properly. • If you connect an unsupported USB device, the following problems may occur. See “Information about compatible devices” (page33). —The USB device is not recognized. —Playback is not possible. —The sound skips. —There is noise. —A distorted sound is output.There is no sound. • The USB device is not connected correctly. Turn off the system, then reconnect the USB device.There is noise, skipping, or distorted sound. • You are using an unsupported USB device. See “Information about compatible devices” (page33). • Turn off the system and reconnect the USB device, then turn on the system. • The music data itself contains noise, or the sound is distorted. Noise may have been entered during music creation process using the computer. Create the music data again. • The bit rate used when encoding an audio file was low. Send an audio file with higher bit rates to the USB device.The USB device is not recognized. • Turn off the system and reconnect the USB device, then turn on the system. • You are using an unsupported USB device. See “Information about compatible devices” (page33). • The USB device is not working properly. Refer to the operating instructions of the USB device on how to deal with this problem.Playback does not start. • Turn off the system and reconnect the USB device, then turn on the system. • You are using an unsupported USB device. See “Information about compatible devices” (page33).Playback does not start from the first file. • Set the play mode to normal play mode using “Sony | Music Center” (page22).
35GBAdditional InformationGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Files cannot be played back. • USB devices formatted with file systems other than FAT16 or FAT32 are unsupported.* • If you use a partitioned USB device, only files on the first partition can be played back. • Files that are encrypted or protected by passwords cannot be played back. • Files with DRM (Digital Rights Management) copyright protection cannot be played back by this system.*  This system supports FAT16 and FAT32, but some USB storage devices may not support all of these FAT. For details, refer to the operating instructions of each USB storage device or contact the manufacturer.BLUETOOTH devicePairing cannot be performed. • Move the BLUETOOTH device closer to the system. • Pairing may not be possible if other BLUETOOTH devices are present around the system. In this case, turn off the other BLUETOOTH devices. • Make sure to enter the correct passkey when selecting the system’s name (this system) on the BLUETOOTH device.The BLUETOOTH device cannot detect the system. • Set the BLUETOOTH signal to on (page21).Connection is not possible. • The BLUETOOTH device you attempted to connect does not support the A2DP profile, and cannot be connected with the system. • Enable the BLUETOOTH function of the BLUETOOTH device. • Establish a connection from the BLUETOOTH device. • The pairing registration information has been erased. Perform the pairing operation again. • Erase the pairing registration information of the BLUETOOTH device by restoring the system to factory default settings (page37) and perform the pairing operation again (page15). • Once all the pairing information on the system has been erased, iPhone/iPod touch may not be able to connect to the system. In this case, delete pairing information of the system on iPhone/iPod touch, and then perform the pairing procedure again.The sound skips or fluctuates, or the connection is lost. • The system and the BLUETOOTH device are too far apart. • If there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. • If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away.The sound of your BLUETOOTH device cannot be heard on this system. • Increase the volume on your BLUETOOTH device first, then adjust the volume using the volume +/– buttons.There is noise, skipping, or distorted sound. • You are using an unsupported USB device. See “Information about compatible devices” (page33). • Turn off the system and reconnect the USB device, then turn on the system. • The music data itself contains noise, or the sound is distorted. Noise may have been entered during music creation process using the computer. Create the music data again. • The bit rate used when encoding an audio file was low. Send an audio file with higher bit rates to the USB device.The USB device is not recognized. • Turn off the system and reconnect the USB device, then turn on the system. • You are using an unsupported USB device. See “Information about compatible devices” (page33). • The USB device is not working properly. Refer to the operating instructions of the USB device on how to deal with this problem.Playback does not start. • Turn off the system and reconnect the USB device, then turn on the system. • You are using an unsupported USB device. See “Information about compatible devices” (page33).Playback does not start from the first file. • Set the play mode to normal play mode using “Sony | Music Center” (page22).
36GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Restoring the system to the factory default settingsIf the system still does not operate properly, restore it to the factory default settings.1 Disconnect and reconnect the AC power cord, and then turn on the system.2 Hold down FUNCTION   PAIRING and the volume – button for more than 5seconds.After the ,  (BLUETOOTH), USB, and AUDIO IN indicators on the unit flash 2 times, all user-configured settings, such as the pairing registration information, are restored to factory default settings.There is severe hum, noise, or distorted sound. • If there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. • If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away. • Turn down the volume of the connected BLUETOOTH device.Party Chain and speaker add functionWired Party Chain function cannot be activated. • Check the connections (page24). • Make sure the audio cords are connected correctly. • Select the function other than the Audio In function (page26).Wired Party Chain function does not work properly. • Turn off the system. Then, turn it back on again to activate the Wired Party Chain function.Unable to connect a BLUETOOTH device with the system in the speaker add function. • After connecting two GTK-XB60/XB90 systems, perform the pairing procedure between a BLUETOOTH device and the system where the  (BLUETOOTH) indicator is flashing. Then perform the BLUETOOTH connection.Resetting the systemIf the system doesn’t respond and cannot be operated despite the power being on, turn off and reset the system using the RESET button.1 Press RESET on the rear of the unit with a pin or other pointed object.The system will turn off.2 Press  to turn the system back on.Notes • If the system doesn’t turn back on, consult your Sony dealer. • Pairing information is not deleted when you press RESET.
37GBAdditional InformationGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Restoring the system to the factory default settingsIf the system still does not operate properly, restore it to the factory default settings.1 Disconnect and reconnect the AC power cord, and then turn on the system.2 Hold down FUNCTION   PAIRING and the volume – button for more than 5seconds.After the ,  (BLUETOOTH), USB, and AUDIO IN indicators on the unit flash 2 times, all user-configured settings, such as the pairing registration information, are restored to factory default settings.PrecautionsOn safety • Completely disconnect the AC power cord (mains lead) from the wall outlet (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. • Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. • AC power cord must be changed only at the qualified service shop.On placement • Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. • Be careful when placing the system on surfaces that have been specially treated (for example, wax, oil, polish) as staining or discoloration of the surface may result. • Make sure not to splash water on the unit. This unit is not waterproof.On heat buildup • Heat buildup on the system during operation is normal and is not a cause for alarm. • Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot. • Do not obstruct the ventilation holes.On the speaker systemThe built-in speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the system far away from the TV.Cleaning the cabinetClean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol.Resetting the systemIf the system doesn’t respond and cannot be operated despite the power being on, turn off and reset the system using the RESET button.1 Press RESET on the rear of the unit with a pin or other pointed object.The system will turn off.2 Press  to turn the system back on.Notes • If the system doesn’t turn back on, consult your Sony dealer. • Pairing information is not deleted when you press RESET.
38GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)SpecificationsAUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION:(The United States model only)Left/Right Channel:With 3ohms loads, both channels driven, from 120  10,000Hz; rated 30watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250milliwatts to rated output.Speaker sectionGTK-XB60:Tweeter: 50mm (2in) × 2, cone typeWoofer: 130mm (5/ in) × 2, cone typeGTK-XB90:Tweeter: 60mm (2/ in) × 3, cone typeWoofer: 180mm (7in) × 2, cone typeInputsAUDIO/PARTY CHAIN IN L/R:Voltage xxV, impedance xxkilohmsMIC:Sensitivity: xxmV, impedance xxkilohmsOutputsAUDIO/PARTY CHAIN OUT L/R:Voltage xxV, impedance xxohmsUSB section and supported audio formats (USB) port:Type A, maximum current 2.1ASupported bit rate:MP3 (MPEG1 Audio Layer-3):  32kbps  320kbps, VBRWMA: 32kbps  192kbps, VBRSampling frequencies:MP3 (MPEG1 Audio Layer-3): 32/44.1/48 kHzWMA: 44.1 kHzOn BLUETOOTH Communication • BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions. — When a person, metal object, wall or other obstruction is between the devices with a BLUETOOTH connection — Locations where a wireless LAN is installed — Around microwave ovens that are in use — Locations where other electromagnetic waves are generated • BLUETOOTH devices and wireless LAN  (IEEE 802.11b/g) equipment use the same frequency band (2.4 GHz). When using your BLUETOOTH device near a device with wireless LAN capability, electromagnetic interference may occur. This could result in lower data transfer rates, noise, or inability to connect. If this happens, try the following remedies: — Use this system at least 10 meters (33 feet) away from the wireless LAN equipment. — Turn off the power to the wireless LAN equipment when using your BLUETOOTH device within 10 meters (33 feet). — Use this system and BLUETOOTH device as closer to each other as possible. • The radio waves broadcast by this system may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this system and BLUETOOTH device in the following locations: — In hospitals, on trains, in airplanes, at gas stations, and any place where flammable gases may be present — Near automatic doors or fire alarms • This system supports security functions that comply with BLUETOOTH specifications to ensure secure connections during communication using BLUETOOTH technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using BLUETOOTH technology. • Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using BLUETOOTH technology. • BLUETOOTH communication is not necessarily guaranteed with all BLUETOOTH devices that have the same profile as this system. • BLUETOOTH devices connected with this system must comply with the BLUETOOTH specification prescribed by the Bluetooth SIG, Inc., and must be certified to comply. However, even when a device complies with the BLUETOOTH specification, there may be cases where the characteristics or specifications of the BLUETOOTH device make it impossible to connect, or may result in different control methods, display or operation. • Noise may occur or the audio may cut off depending on the BLUETOOTH device connected with this system, the communications environment, or surrounding conditions.
39GBAdditional InformationGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)SpecificationsAUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION:(The United States model only)Left/Right Channel:With 3ohms loads, both channels driven, from 120  10,000Hz; rated 30watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250milliwatts to rated output.Speaker sectionGTK-XB60:Tweeter: 50mm (2in) × 2, cone typeWoofer: 130mm (5/ in) × 2, cone typeGTK-XB90:Tweeter: 60mm (2/ in) × 3, cone typeWoofer: 180mm (7in) × 2, cone typeInputsAUDIO/PARTY CHAIN IN L/R:Voltage xxV, impedance xxkilohmsMIC:Sensitivity: xxmV, impedance xxkilohmsOutputsAUDIO/PARTY CHAIN OUT L/R:Voltage xxV, impedance xxohmsUSB section and supported audio formats (USB) port:Type A, maximum current 2.1ASupported bit rate:MP3 (MPEG1 Audio Layer-3):  32kbps  320kbps, VBRWMA: 32kbps  192kbps, VBRSampling frequencies:MP3 (MPEG1 Audio Layer-3): 32/44.1/48 kHzWMA: 44.1 kHzBLUETOOTH sectionCommunication system:BLUETOOTH Standard version 4.2Output:BLUETOOTH Standard Power Class 2Maximum communication range:Line of sight approx. 10 m (33 feet)1)Frequency band:2.4 GHz band (2.4000 GHz – 2.4835GHz)Modulation method:FHSS (Freq Hopping Spread Spectrum)Compatible BLUETOOTH profiles2):A2DP (Advanced Audio Distribution Profile)AVRCP (Audio Video Remote Control Profile)BLE (Bluetooth Low Energy)HFP (Hands-free Profile)HSP (Headset Profile)SPP (Serial Port Profile)Supported codecs:SBC (Sub Band Codec)AAC (Advanced Audio Coding)LDAC1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna’s performance, operating system, software application, etc.2)  BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices. • Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using BLUETOOTH technology. • BLUETOOTH communication is not necessarily guaranteed with all BLUETOOTH devices that have the same profile as this system. • BLUETOOTH devices connected with this system must comply with the BLUETOOTH specification prescribed by the Bluetooth SIG, Inc., and must be certified to comply. However, even when a device complies with the BLUETOOTH specification, there may be cases where the characteristics or specifications of the BLUETOOTH device make it impossible to connect, or may result in different control methods, display or operation. • Noise may occur or the audio may cut off depending on the BLUETOOTH device connected with this system, the communications environment, or surrounding conditions.
40GBGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)Usage life of the lithium-ion batteryThe times given below will be shorter if you charge and discharge the battery repeatedly.When STAMINA mode is turned off:Speaker LightsOn OffGTK-XB60 12hours1)/ 3hours2)14hours1)/ 3.5hours2)GTK-XB90 12hours1)/ 3hours2)21hours1)/ 3.5hours2)When STAMINA mode is turned on3):Speaker LightsOn OffGTK-XB60 13hours1)/ 5hours2)14hours1)/ 5.5hours2)GTK-XB90 15hours1)/ 5hours2)21hours1)/ 5.5hours2)1)  Measured using a predetermined music source with the volume level of the system set to 70 dB. The stated time may vary depending on the ambient temperature and conditions of use.2)  Measured using a predetermined music source with the volume level of the system set to the maximum.3)  The given times may vary depending on the playback content.GeneralPower requirements: GTK-XB60/GTK-XB90:  AC 120V, 60HzPower consumption:GTK-XB60: 35WGTK-XB90: 40WStandby power consumption:GTK-XB60:  When BLUETOOTH standby mode is set to off: xxW (eco mode)When BLUETOOTH standby mode is set to on: xxW (all wireless network ports on)GTK-XB90:  When BLUETOOTH standby mode is set to off: xxW (eco mode)When BLUETOOTH standby mode is set to on: xxW (all wireless network ports on)Dimensions (W/H/D) (Approx.):GTK-XB60:  265mm × 549mm × 276mm (10/in × 21 /in × 10/in)GTK-XB90:  336mm × 670mm × 330mm (13/in × 26/in × 13in)Mass (Approx.):GTK-XB60: 8kg (30lb 14oz)GTK-XB90: 14kg (17lb 11oz)Quantity of the system:1 pieceSupplied accessories: AC power cord (1)Design and specifications are subject to change without notice.License and Trademark Notice • MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. • Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. • The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. • The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. • Google Play and Android are trademarks of Google Inc. • LDAC™ and LDAC logo are trademarks of Sony Corporation.
41GBAdditional InformationGTK-XB60/XB90.4-697-227-11(1)GTK-XB60/XB90.4-697-227-11(1)GeneralPower requirements: GTK-XB60/GTK-XB90:  AC 120V, 60HzPower consumption:GTK-XB60: 35WGTK-XB90: 40WStandby power consumption:GTK-XB60:  When BLUETOOTH standby mode is set to off: xxW (eco mode)When BLUETOOTH standby mode is set to on: xxW (all wireless network ports on)GTK-XB90:  When BLUETOOTH standby mode is set to off: xxW (eco mode)When BLUETOOTH standby mode is set to on: xxW (all wireless network ports on)Dimensions (W/H/D) (Approx.):GTK-XB60:  265mm × 549mm × 276mm (10/in × 21 /in × 10/in)GTK-XB90:  336mm × 670mm × 330mm (13/in × 26/in × 13in)Mass (Approx.):GTK-XB60: 8kg (30lb 14oz)GTK-XB90: 14kg (17lb 11oz)Quantity of the system:1 pieceSupplied accessories: AC power cord (1)Design and specifications are subject to change without notice.License and Trademark Notice • MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. • Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. • The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. • The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. • Google Play and Android are trademarks of Google Inc. • LDAC™ and LDAC logo are trademarks of Sony Corporation. • Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. • “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. • WALKMAN and WALKMAN logo are registered trademarks of Sony Corporation. • All other trademarks and registered trademarks are of their respective holders. In this manual, TM and ® marks are not specified.

Navigation menu