Sony Group DWM01 Digital Wireless Microphone User Manual

Sony Corporation Digital Wireless Microphone

User manual

4-177-129-11 (1)© 2010 Sony CorporationDigital WirelessMicrophoneOperating InstructionsBefore operating the unit, please read this manual thoroughly and retain it for future reference.DWM-01The supplied CD-ROM includes the Operating Instructions for the DWM-01 Digital Wireless Microphone (English, French, German, Italian, Spanish, and Japanese versions) and the frequency lists (English and Japanese versions) in PDF format. For more details, see “Using the CD-ROM Manual” on page 21.
2WARNINGBatteries shall not be exposed to excessive heat such as sunshine, fire or the like.For the customers in the U.S.A.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.- Consult the dealer or an experienced radio/TV technician for help.You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.If you have any questions about this product, you may call;Sony Customer Information Service Center 1-800-222-7669 or http://www.sony.com/Notice for customers in the U.S.A.Use of Sony wireless devices is regulated by the Federal Communications Commision as described in Part 74 subpart H of the FCC regulations and users authorized thereby are required to obtain an appropriate license.IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted,Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate this device.This device complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This device has very low levels of RF energy that it is deemed to comply without testing of specific absorption radio (SAR).Declaration of ConformityTrade Name: SONYModel: DWM-01Responsible Party: Sony Electronics Inc.Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A.Telephone Number: 858-942-2230This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3For customers in CanadaThis Class B digital apparatus complies with Canadian ICES-003.For the customers in CanadaOperation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.Notice for customers in Canada:Use of Sony wireless devices is regulated by the Industry Canada as described in their Radio Standard Specification RSS-123.A licence is normally required. The local district office of Industry Canada should therefore be contacted. When the operation of the device is within the broadcast band, the licence is issued on no-interference, noprotection basis with respect to broadcast signals.AVERTISSEMENTN’exposez pas les batteries à une chaleur excessive, au soleil ou près d’un feu par exemple.Pour les utilisateurs au CanadaCet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.L’utilisation doit répondre aux deux conditions suivantes : (1) ce matériel ne doit pas provoquer de brouillage et (2) il doit accepter tout brouillage, même celui qui est susceptible d’affecter son fonctionnement.La mention « IC: » devant le numéro de certification/ homologation signifie uniquement que les spécifications techniques d’Industrie Canada sont remplies.Remarque à l’intention des utilisateurs au Canada:L’usage des appareils sans fil Sony est réglementé par l’Industrie Canada comme décrit dans leur Cahier des Normes Radioélectriques CNR-123.Une licence est normalement requise.Le bureau de l’Industrie Canada doit être contacté. Lorsque le fonctionnement de l’appareil respecte les limites de la bande de radiodiffusion, la licence est accordée sur la base d’une non-interférence, non-protection pour les signaux de radiodiffusion.WARNUNGAkkus dürfen keinesfalls übermäßiger Wärmeeinwirkung ausgesetzt werden, wie z.B. Sonneneinstrahlung, Feuer o. ä.AVVERTENZALe batterie non devono essere esposte a fonti di calore eccessivo come luce solare diretta, fuoco, ecc.ADVERTENCIANo se deben exponer las baterÌas a una fuente de calor excesivo como la luz del sol, el fuego o similar.U.K. 470 - 862 MHzGermany 470 - 606 MHz, 614 - 862 MHzNorway 800 - 820 MHzLuxembourg 470 - 862 MHzBelgium 470 - 862 MHzDenmark 800.100 - 819.900 MHzFrance 470 - 830 MHzItaly 470 - 854 MHzSweden 470 - 862 MHzSwitzerland 790 - 862 MHzFinland 790.100 - 821.900 MHz, 854 - 862 MHzIceland 470 - 862 MHzTurkey 470 - 862 MHz
4For the customers in EuropeHereby, Sony Corporation, declares that this DWM-01 is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. For details, please access the following URL: http://www.compliance.sony.de/This product is intended to be used in the following countries : United Kingdom, Germany, Norway, Luxembourg, Belgium, Denmark, France, Italy, Sweden, Switzerland, Finland, Iceland, and Turkey.Pour les clients en EuropePar la présente Sony Corporation déclare que l'appareil DWM-01 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Pour toute information complémentaire, veuillez consulter l’URL suivante: http://www.compliance.sony.de/Ce produit est prévu pour être utilisé dans les pays suivants: Royaume-Uni, Allemagne, Norvège, Luxembourg, Belgique, Danemark, France, Italie, Suède, Suisse, Finlande, Islande et Turquie.Für Kunden in EuropaHiermit erklärt Sony Corporation, dass sich das Gerät DWM-01 in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.Weitere Informationen erhältlich unter: http://www.compliance.sony.de/Dieses Produkt ist für den Gebrauch in den folgenden Ländern vorgesehen: Vereinigtes Königreich, Deutschland, Norwegen, Luxemburg, Belgien, Dänemark, Frankreich, Italien, Schweden, Schweiz, Finnland, Island und Türkei.Per i clienti in EuropaCon la presente Sony Corporation dichiara che questo DWM-01 è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Per ulteriori dettagli, si prega di consultare il seguente URL: http://www.compliance.sony.de/Questo prodotto è destinato all’uso nei seguenti paesi: Regno Unito, Germania, Norvegia, Lussemburgo, Belgio, Danimarca, Francia, Italia, Svezia, Svizzera, Finlandia, Islanda e Turchia.Para los clientes de EuropaPor medio de la presente Sony Corporation declara que el DWM-01 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Para mayor información, por favor consulte el siguiente URL: http://www.compliance.sony.de/Este producto está destinado a utilizarse en los siguientes países: Reino Unido, Alemania, Noruega, Luxemburgo, Bélgica, Dinamarca, Francia, Italia, Suecia, Suiza, Finlandia, Islandia y Turquía.Voor de klanten in EuropaHierbij verklaart Sony Corporation dat het toestel DWM-01 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Nadere informatie kunt u vinden op:http://www.compliance.sony.de/ Dit product is bedoeld om in volgende landen gebruikt te worden: Verenigd Koninkrijk, Duitsland, Noorwegen, Luxemburg, België, Denemarken, Frankrijk, Italië, Zweden, Zwitserland, Finland, IJsland en Turkije.For kunder i EuropaHärmed intygar Sony Corporation att denna DWM-01 står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
5För ytterligare information gå in på följande hemsida: http://www.compliance.sony.de/Den här produkten är avsedd för användning i följande länder: Storbritannien, Tyskland, Norge, Luxembourg, Belgien, Danmark, Frankrike, Italien, Sverige, Schweiz, Finland, Island och Turkiet.Para os clientes da EuropaSony Corporation declara que este DWM-01 está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Para mais informacoes, por favor consulte a seguinte URL: http://www.compliance.sony.de/Este produto destina-se a ser usado nos seguintes países: Reino Unido, Alemanha, Noruega, Luxemburgo, Bélgica, Dinamarca, França, Itália, Suécia, Suíça, Finlândia, Islândia e Turquia.For kunder i EuropaUndertegnede Sony Corporation erklærer herved, at følgende udstyr DWM-01 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. For yderligere information gå ind på følgende hjemmeside: http://www.compliance.sony.de/Dette produkt er beregnet til brug i de følgende lande: Storbritannien, Tyskland, Norge, Luxembourg, Belgien, Danmark, Frankrig, Italien, Sverige, Schweiz, Finland, Island og Tyrkiet.Euroopassa oleville asiakkailleSony Corporation vakuuttaa täten että DWM-01 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.Halutessasi lisätietoja, käy osoitteessa:http://www.compliance.sony.de/Tämä tuote on tarkoitettu käytettäväksi seuraavissa maissa: Yhdistynyt kuningaskunta, Saksa, Norja, Luxemburg, Belgia, Tanska, Ranska, Italia, Ruotsi, Sveitsi, Suomi, Islanti ja Turkki.For kundene i EuropaSony Corporation erklærer herved at utstyret DWM-01 er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF. For flere detaljer, vennligst se: http://www.compliance.sony.de/Dette produktet er ment for bruk i følgende land: Storbritannia, Tyskland, Norge, Luxemburg, Belgia, Danmark, Frankrike, Italia, Sverige, Sveits, Finland, Island og Tyrkia.Για τους πελάτες στην EυρώπηΜε την παρούσα η Sony Corporation δηλώνει τι DWM-01 συµµορφώνεται προς της ουσιώδεις απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας 1999/5/ΕΚ..Για λεπτοµέρειες παρακαλούµε πως ελένξετε την ακλουθη σελίδα του διαδικτύου:http://www.compliance.sony.de/Το προϊν προορίζεται για χρήση στις εξής χώρες: Ηνωµένο Βασίλειο, Γερµανία, Νορβηγία, Λουξεµβούργο, Βέλγιο, ∆ανία, Γαλλία, Ιταλία, Σουηδία, Ελβετία, Φινλανδία, Ισλανδία και Τουρκία.
6Pro zákazníky v EvropěSony Corporation tímto prohlašuje, že tento DWM-01 je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.Podrobnosti lze získat na následující URL:http://www.compliance.sony.de/Tento produkt je určen k použití v následujících zemích: Spojené království, Německo, Norsko, Lucembursko, Belgie, Dánsko, Francie, Itálie, Švédsko, Švýcarsko, Finsko, Island a Turecko.Euroopa klientideleSony Corporation kinnitab käesolevaga seadme DWM-01 vastavust 1999/5/EÜ direktiivi põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.Üksikasjalikum info: http://www.compliance.sony.de/.See toode on ettenähtud kasutamiseks järgmistes riikides: Suurbritannia, Saksamaa, Norra, Luksemburg, Belgia, Taani, Prantsusmaa, Itaalia, Rootsi, Šveits, Soome, Island ja Türgi.Európai vásárlóink fi gyelmébeAlulírott, Sony Corporation nyilatkozom, hogy a(z) DWM-01 megfelel a vonatkozó alapvető követelményeknek és az 1999/5/EC irányelv egyéb előírásainak.További információkat a következő weboldalon találhat:http://www.compliance.sony.de/Ez a termék a következő országokban használható: Egyesült Királyság, Németország, Norvégia, Luxemburg, Belgium, Dánia, Franciaország, Olaszország, Svédország, Svájc, Finnország, Izland és Törökország.Dotyczy klientów z EuropyNiniejszym Sony Corporation oświadcza, że DWM-01 jest zgodne z zasadniczymi wymaganiami oraz innymistosownymi postanowieniami Dyrektywy 1999/5/WE.Szczegółowe informacje znaleźć można pod następującym adresem URL:http://www.compliance.sony.de/Ten produkt jest przeznaczony do użytku w następujących krajach: Wielkiej Brytanii, Niemczech, Norwegii,
7Luksemburgu, Belgii, Danii, Francji, Włoszech, Szwecji, Szwajcarii, Finlandii, Islandii i Turcji.Pentru clienţii din EuropaPrin prezenta, Sony Corporation declară că acest DWM-01 respectă cerinţele esenţiale și este în conformitate cu prevederile Directivei 1995/5/EC.Pentru detalii, vă rugăm accesaţi următoarea adresă:http://www.compliance.sony.de/Acest produs este destinat utilizării în următoarele ţări: Regatul Unit, Germania, Norvegia, Luxemburg, Belgia, Danemarca, Franţa, Italia, Suedia, Elveţia, Finlanda, Islanda și Turcia.Pre zákazníkov v EurópeSony Corporation týmto vyhlasuje, že DWM-01 spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.Podrobnosti získate na nasledovnej webovej adrese:http://www.compliance.sony.de/Tento produkt je určený na používanie v nasledovných krajinách: Veľká Británia, Nemecko, Nórsko, Luxembursko, Belgicko, Dánsko, Francúzsko, Taliansko, Švédsko, Švajčiarsko, Fínsko, Island a Turecko.Za stranke v EvropiSony Corporation izjavlja, da je ta DWM-01 v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.Za podrobnosti vas naprošamo, če pogledate naURL:http://www.compliance.sony.de/Izdelek je namenjen za uporabo v naslednjih državah: Veliki Britaniji, Nemčiji, Norveški, Luksemburgu, Belgiji, Danski, Franciji, Italiji, Švedski, Švici, Finski, Islandiji in Turčiji.For the customers in UK:The use of this equipment is subject to individual license granted by the National Frequency Administration Authority.Für Kunden in Großbritannien:Der Gebrauch dieses Geräts unterliegt einer entsprechenden Lizenz von der nationalen Frequenzverwaltungsbehörde.For kundene i Storbritannia:Bruken av dette utstyret er underlagt en spesiell lisens som utstedes av nasjonale frekvensforvaltningsmyndigheter.Pour les clients résidant au Royaume-Uni:L’utilisation de cet équipement est soumise à la licence individuelle accordée par les autorités d’administration des fréquences nationales.Voor klanten in het Verenigd Koninkrijk:Het gebruik van deze apparatuur is onderhevig aan een afzonderlijke licentie die is verleend door de nationale autoriteit voor frequentiebeheer.For kunderne i Storbritannien:Brugen af dette udstyr er underlagt individuel licens givet at telemyndighederne.Per i clienti nel Regno Unito:L’uso di questo apparecchio è soggetto ad una licenza individuale accordata dall’Autorità per l’amministrazione delle frequenze nazionali..För kunderna i Storbritannien:Användandet av den här utrustningen sker under enskilda licenser som utfärdas av den nationella myndighet som handhar frekvenstillstånd.
8Yhdistyneessä kuningaskunnassa asuville asiakkaille: Laitteiston käyttöön tarvitaan paikallisen viestintäviranomaisen myöntämä henkilökohtainen lupa.For the customers in Germany:According to German regulation this equipment can only operate in channels (specify which channels are allowed).The use of this equipment is subject to individual license granted by the National Frequency Administration Authority.Für Kunden in Deutschland:Gemäß den Vorschriften in Deutschland kann dieses Gerät nur auf bestimmten Kanälen betrieben werden (zulässige Kanäle angeben). Der Gebrauch dieses Geräts unterliegt einer entsprechenden Lizenz von der nationalen Frequenzverwaltungsbehörde.For kundene i Tyskland:I henhold til tyske forskrifter kan dette utstyret kun brukes i kanal (angi hvilke kanaler som er tillatt).Bruken av dette utstyret er underlagt en spesiell lisens som utstedes av nasjonale frekvensforvaltningsmyndigheter.Pour les clients résidant en Allemagne:Conformément à la réglementation allemande, cet équipement fonctionne uniquement avec des canaux (spécifiez les canaux autorisés).L’utilisation de cet équipement est soumise à la licence individuelle accordée par les autorités d’administration des fréquences nationales.Voor klanten in Duitsland:Volgens de Duitse wetgeving mag deze apparatuur alleen werken in kanalen (opgeven welke kanalen zijn toegestaan).Het gebruik van deze apparatuur is onderhevig aan een afzonderlijke licentie die is verleend door de nationale autoriteit voor frequentiebeheer.For kunderne i Tyskland:I henhold til tysk lovgivning kan dette udstyr kun fungere i kanaler (angiv, hvilke kanaler, der er tilladt). Brugen af dette udstyr er underlagt individuel licens givet at telemyndighederne.Per i clienti in Germania:In base alle norme vigenti in Germania, il presente apparecchio può essere utilizzato solo su canali (specificare i canali consentiti).L’uso di questo apparecchio è soggetto ad una licenza individuale accordata dall’Autorità per l’amministrazione delle frequenze nazionali.För kunderna i Tyskland:Enligt tysk lagstiftning får den här utrustningen endast användas med följande kanaler (ange vilka kanaler som är tillåtna).Användandet av den här utrustningen sker under enskilda licenser som utfärdas av den nationella myndighet som handhar frekvenstillstånd.Saksassa asuville asiakkaille: Saksassa voimassa olevien määräysten mukaan tätä laitetta saa käyttää ainoastaan kanavilla (ilmoita sallitut kanavat).Laitteiston käyttöön tarvitaan paikallisen viestintäviranomaisen myöntämä henkilökohtainen lupa.
9For the customers in Norway:According to Norwegian regulation this equipment can only operate in channels (specify which channels are allowed) with a maximum RF output power of 20mW.The use of this equipment is subject to individual license granted by the National Frequency Administration Authority.Für Kunden in Norwegen:Gemäß den Vorschriften in Norwegen kann dieses Gerät nur auf bestimmten Kanälen betrieben werden (zulässige Kanäle angeben), und zwar mit einer maximalen HF-Ausgangsleistung von 20 mW.Der Gebrauch dieses Geräts unterliegt einer entsprechenden Lizenz von der nationalen Frequenzverwaltungsbehörde.For kundene i Norge:I henhold til norske forskrifter kan dette utstyret kun brukes i kanal (angi hvilke kanaler som er tillatt) med maksimal RF-utgangseffekt på 20 mW.Bruken av dette utstyret er underlagt en spesiell lisens som utstedes av nasjonale frekvensforvaltningsmyndigheter.Pour les clients résidant en Norvège:Conformément à la réglementation norvégienne, cet équipement fonctionne uniquement avec des canaux (spécifiez les canaux autorisés) ayant une puissance de sortie RF maximale de 20 mW.L’utilisation de cet équipement est soumise à la licence individuelle accordée par les autorités d’administration des fréquences nationales.Voor klanten in Noorwegen:Volgens de Noorse wetgeving mag deze apparatuur alleen werken in kanalen (opgeven welke kanalen zijn toegestaan) met een maximaal RF-uitgangsvermogen van 20 mW.Het gebruik van deze apparatuur is onderhevig aan een afzonderlijke licentie die is verleend door de nationale autoriteit voor frequentiebeheer.For kunderne i Norge:I henhold til norsk lovgivning kan dette udstyr kun fungere i kanaler (angiv, hvilke kanaler, der er tilladt) med en maksimal RF-udgangseffekt på 20 mW.Brugen af dette udstyr er underlagt individuel licens givet at telemyndighederne.Per i clienti in Norvegia:In base alle norme vigenti in Norvegia, il presente apparecchio può essere utilizzato solo su canali (specificare i canali consentiti) con una potenza di uscita RF massima di 20mW.L’uso di questo apparecchio è soggetto ad una licenza individuale accordata dall’Autorità per l’amministrazione delle frequenze nazionali.För kunderna i Norge:Enligt norsk lagstiftning får den här utrustningen endast användas med följande kanaler (ange vilka kanaler som är tillåtna) med en maximal RF-uteffekt på 20 mW.Användandet av den här utrustningen sker under enskilda licenser som utfärdas av den nationella myndighet som handhar frekvenstillstånd.Norjassa asuville asiakkaille:Norjassa voimassa olevien määräysten mukaan tätä laitetta saa käyttää ainoastaan
10kanavilla (ilmoita sallitut kanavat) ja siten, että RF-lähetysten enimmäisteho on 20 mW.Laitteiston käyttöön tarvitaan paikallisen viestintäviranomaisen myöntämä henkilökohtainen lupa.For the customers in Luxembourg:The use of this equipment is subject to individual license granted by the National Frequency Administration Authority.Für Kunden in Luxemburg:Der Gebrauch dieses Geräts unterliegt einer entsprechenden Lizenz von der nationalen Frequenzverwaltungsbehörde.For kundene i Luxemburg:Bruken av dette utstyret er underlagt en spesiell lisens som utstedes av nasjonale frekvensforvaltningsmyndigheter.Pour les clients résidant au Luxembourg:L’utilisation de cet équipement est soumise à la licence individuelle accordée par les autorités d’administration des fréquences nationales.Voor klanten in Luxemburg:Het gebruik van deze apparatuur is onderhevig aan een afzonderlijke licentie die is verleend door de nationale autoriteit voor frequentiebeheer.For kunderne i Luxembourg:Brugen af dette udstyr er underlagt individuel licens givet at telemyndighederne.Per i clienti in Lussemburgo:L’uso di questo apparecchio è soggetto ad una licenza individuale accordata dall’Autorità per l’amministrazione delle frequenze nazionali.För kunderna i Luxemburg:Användandet av den här utrustningen sker under enskilda licenser som utfärdas av den nationella myndighet som handhar frekvenstillstånd.Luxemburgissa asuville asiakkaille:Laitteiston käyttöön tarvitaan paikallisen viestintäviranomaisen myöntämä henkilökohtainen lupa.For the customers in Belgium:The use of this equipment in the frequency band 470-862 MHz is subject to individual license granted by the National Frequency Administration Authority.Only the following frequencies can be used without individual license:•518-526 MHz• 534-542 MHz (with the exception of the province of Hainaut where the equipment requires individual license)• 854-862 MHz (with the exception of West Flanders where the equipment requires individual license)
11Für Kunden in Belgien:Der Gebrauch dieses Geräts im Frequenzband von 470-862 MHz unterliegteiner entsprechenden Lizenz, die von der nationalen Frequenzverwaltungsbehörde vergeben wird.Nur die folgenden Frequenzen können ohne entsprechende Lizenz gebraucht werden:• 518-526 MHz• 534-542 MHz (mit Ausnahme der Provinz Hennegau, wo für das Gerät eine entsprechende Lizenz erforderlich ist)• 854-862 MHz (mit Ausnahme von Westflandern, wo für das Gerät eine entsprechende Lizenz erforderlich ist)For kundene i Belgia:Bruken av dette utstyret i frekvensbåndet 470-862 MHz er underlagt en spesiell lisens som utstedes av nasjonale frekvensforvaltningsmyndigheter.Kun følgende frekvenser kan brukes uten spesiell lisens:• 518-526 MHz• 534-542 MHz (med unntak av provinsen Hainaut, der utstyret krever spesiell lisens)• 854-862 MHz (med unntak av Vest-Flanders, der utstyret krever spesiell lisens)Pour les clients résidant en Belgique:L’utilisation de cet équipement dans la bande de fréquences 470-862 MHz est soumise à une licence individuelle accordée par l’autorité d’administration nationale des fréquences.Seules les fréquences suivantes peuvent être utilisées sans licence individuelle :• 518-526 MHz• 534-542 MHz (à l’exception de la province de Hainaut où l’équipement requiert une licence individuelle)• 854-862 MHz (à l’exception de la province de Flandre occidentale où l’équipement requiert une licence individuelle)Voor klanten in België:Het gebruik van deze apparatuur in de frequentieband 470-862 MHz is onderhevig aan een afzonderlijke licentie die is verleend door de nationale autoriteit voor frequentiebeheer. Alleen de volgende frequenties mogen worden gebruikt zonder een afzonderlijke licentie: •518-526 MHz• 534-542 MHz (met uitzondering van de provincie Hainaut waar een afzonderlijke licentie is vereist voor de apparatuur) • 854-862 MHz (met uitzondering van West-Vlaanderen w aar een afzonderlijke licentie is vereist voor de apparatuur) For kunderne i Belgien:Brugen af dette udstyr i frekvensområdet 470 - 862 MHz er underlagt individuel licens givet af telemyndighederne. Kun følgende frekvenser må anvendes uden individuel licens: • 518 - 526 MHz• 534 - 542 MHz (med undtagelse af provinsen Hainaut, hvor der kræves individuel licens til udstyret) • 854 - 862 MHz (med undtagelse af Vestflandern, hvor der kræves individuel licens til udstyret) Per i clienti in Belgio:L’uso di questo apparecchio nella banda di frequenza 470-862 MHz è soggetto ad una licenza individuale accordata dall’Autorità per l’amministrazione delle frequenze nazionali.Solo le seguenti frequenze possono essere utilizzate senza una licenza individuale:•518-526 MHz• 534-542 MHz (ad eccezione della provincia dell’Hainaut dove l’apparecchio richiede una licenza individuale)• 854-862 MHz (ad eccezione delle Fiandre occidentali dove l’apparecchio richiede una licenza individuale)
12För kunderna i Belgien:Användandet av den här utrustningen, som använder frekvensbandet 470-862 MHz, sker under enskilda licenser som utfärdas av den nationella myndighet som handhar frekvenstillstånd. Endast följande frekvenser får användas utan enskild licens: • 518-526 MHz• 534-542 MHz (provinsen Hainaut är ett undantag, där kräver utrustningen enskild licens) • 854-862 MHz (Västflandern är ett undantag, där kräver utrustningen enskild licens) Belgiassa asuville asiakkaille:Laitteiston käyttöön taajuusalueella 470-862 MHz tarvitaan paikallisen viestintäviranomaisen myöntämä henkilökohtainen lupa.Vain seuraavia taajuuksia voidaan käyttää ilman henkilökohtaista lupaa:• 518-526 MHz• 534-542 MHz (lukuun ottamatta Hainautin provinssia, jossa laite vaatii henkilökohtaisen luvan)• 854-862 MHz (lukuun ottamatta Länsi-Flanderia, jossa laite vaatii henkilökohtaisen luvan).For the customers in Denmark:According to Danish regulation this equipment can only operate in channels (specify which channels are allowed).The use of this equipment is subject to individual license granted by the National Frequency Administration Authority.Für Kunden in Dänemark:Gemäß den Vorschriften in Dänemark kann dieses Gerät nur auf bestimmten Kanälen betrieben werden (zulässige Kanäle angeben).Der Gebrauch dieses Geräts unterliegt einer entsprechenden Lizenz von der nationalen Frequenzverwaltungsbehörde.For kundene i Danmark:I henhold til danske forskrifter kan dette utstyret kun brukes i kanal (angi hvilke kanaler som er tillatt).Bruken av dette utstyret er underlagt en spesiell lisens som utstedes av nasjonale frekvensforvaltningsmyndigheter.Pour les clients résidant au Danemark:Conformément à la réglementation danoise, cet équipement fonctionne uniquement avec des canaux (spécifiez les canaux autorisés).L’utilisation de cet équipement est soumise à la licence individuelle accordée par les autorités d’administration des fréquences nationales.
13Voor klanten in Denemarken:Volgens de Deense wetgeving mag deze apparatuur alleen werken in kanalen (opgeven welke kanalen zijn toegestaan).Het gebruik van deze apparatuur is onderhevig aan een afzonderlijke licentie die is verleend door de nationale autoriteit voor frequentiebeheer.For kunderne i Danmark:I henhold til dansk lovgivning kan dette udstyr kun fungere i kanaler (angiv, hvilke kanaler, der er tilladt).Brugen af dette udstyr er underlagt til individuel licens givet at telemyndighederne.Per i clienti in Danimarca:In base alle norme vigenti in Danimarca, il presente apparecchio può essere utilizzato solo su canali (specificare i canali consentiti).L’uso di questo apparecchio è soggetto ad una licenza individuale accordata dall’Autorità per l’amministrazione delle frequenze nazionali.För kunderna i Danmark:Enligt dansk lagstiftning får den här utrustningen endast användas med följande kanaler (ange vilka kanaler som är tillåtna).Användandet av den här utrustningen sker under enskilda licenser som utfärdas av den nationella myndighet som handhar frekvenstillstånd.Tanskassa asuville asiakkaille:Tanskassa voimassa olevien määräysten mukaan tätä laitetta saa käyttää ainoastaan kanavilla (ilmoita sallitut kanavat).Laitteiston käyttöön tarvitaan paikallisen viestintäviranomaisen myöntämä henkilökohtainen lupa.For the customers in Italy:According to Italian regulation this equipment can only operate in channels (specify which channels are allowed).The use of this equipment is subject to individual license granted by the National Frequency Administration Authority.Für Kunden in Italien:Gemäß den Vorschriften in Italien kann dieses Gerät nur auf bestimmten Kanälen betrieben werden (zulässige Kanäle angeben).Der Gebrauch dieses Geräts unterliegt einer entsprechenden Lizenz von der nationalen Frequenzverwaltungsbehörde.For kundene i Italia:I henhold til italienske forskrifter kan dette utstyret kun brukes i kanal (angi hvilke kanaler som er tillatt).Bruken av dette utstyret er underlagt en spesiell lisens som utstedes av nasjonale frekvensforvaltningsmyndigheter.Pour les clients résidant en Italie:Conformément à la réglementation italienne, cet équipement fonctionne uniquement avec des canaux (spécifiez les canaux autorisés).L’utilisation de cet équipement est soumise à la licence individuelle accordée par les autorités d’administration des fréquences nationales.Voor klanten in Italië:Volgens de Italiaanse wetgeving mag deze apparatuur alleen werken in kanalen (opgeven welke kanalen zijn toegestaan).Het gebruik van deze apparatuur is onderhevig aan een afzonderlijke licentie
14die is verleend door de nationale autoriteit voor frequentiebeheer.For kunderne i Italien:I henhold til italiensk lovgivning kan dette udstyr kun fungere i kanaler (angiv, hvilke kanaler, der er tilladt).Brugen af dette udstyr er underlagt individuel licens givet at telemyndighederne.Per i clienti in Italia:In base alle norme vigenti in Italia, il presente apparecchio può essere utilizzato solo su canali (specificare i canali consentiti).L’uso di questo apparecchio è soggetto ad una licenza individuale accordata dall’Autorità per l’amministrazione delle frequenze nazionali.För kunderna i Italien:Enligt italiensk lagstiftning får den här utrustningen endast användas med följande kanaler (ange vilka kanaler som är tillåtna).Användandet av den här utrustningen sker under enskilda licenser som utfärdas av den nationella myndighet som handhar frekvenstillstånd.Italiassa asuville asiakkaille:Italiassa voimassa olevien määräysten mukaan tätä laitetta saa käyttää ainoastaan kanavilla (ilmoita sallitut kanavat).Laitteiston käyttöön tarvitaan paikallisen viestintäviranomaisen myöntämä henkilökohtainen lupa.For the customers in Sweden:According to Swedish regulation this equipment can only operate in channels (specify which channels are allowed).The use of this equipment is subject to individual license granted by the National Frequency Administration Authority.Für Kunden in Schweden:Gemäß den Vorschriften in Schweden kann dieses Gerät nur auf bestimmten Kanälen betrieben werden (zulässige Kanäle angeben).Der Gebrauch dieses Geräts unterliegt einer entsprechenden Lizenz von der nationalen Frequenzverwaltungsbehörde.For kundene i Sverige:I henhold til svenske forskrifter kan dette utstyret kun brukes i kanal (angi hvilke kanaler som er tillatt).Bruken av dette utstyret er underlagt en spesiell lisens som utstedes av nasjonale frekvensforvaltningsmyndigheter.Pour les clients résidant en Suède:Conformément à la réglementation suédoise, cet équipement fonctionne uniquement avec des canaux (spécifiez les canaux autorisés).L’utilisation de cet équipement est soumise à la licence individuelle accordée par les autorités d’administration des fréquences nationales.Voor klanten in Zweden:Volgens de Zweedse wetgeving mag deze apparatuur alleen werken in kanalen (opgeven welke kanalen zijn toegestaan).
15Het gebruik van deze apparatuur is onderhevig aan een afzonderlijke licentie die is verleend door de nationale autoriteit voor frequentiebeheer.For kunderne i Sverige:I henhold til svensk lovgivning kan dette udstyr kun fungere i kanaler (angiv, hvilke kanaler, der er tilladt).Brugen af dette udstyr er underlagt individuel licens givet at telemyndighederne.Per i clienti in Svezia:In base alle norme vigenti in Svezia, il presente apparecchio può essere utilizzato solo su canali (specificare i canali consentiti).L’uso di questo apparecchio è soggetto ad una licenza individuale accordata dall’Autorità per l’amministrazione delle frequenze nazionali.För kunderna i Sverige:Enligt svensk lagstiftning får den här utrustningen endast användas med följande kanaler (ange vilka kanaler som är tillåtna).Användandet av den här utrustningen sker under enskilda licenser som utfärdas av den nationella myndighet som handhar frekvenstillstånd.Ruotsissa asuville asiakkaille:Ruotsissa voimassa olevien määräysten mukaan tätä laitetta saa käyttää ainoastaan kanavilla (ilmoita sallitut kanavat).Laitteiston käyttöön tarvitaan paikallisen viestintäviranomaisen myöntämä henkilökohtainen lupa.For the customers in Switzerland:According to Swiss regulation this equipment can only operate in channels (specify which channels are allowed).The use of this equipment is subject to individual license granted by the National Frequency Administration Authority.Für Kunden in der Schweiz:Gemäß den Vorschriften in der Schweiz kann dieses Gerät nur auf bestimmten Kanälen betrieben werden (zulässige Kanäle angeben).Der Gebrauch dieses Geräts unterliegt einer entsprechenden Lizenz von der nationalen Frequenzverwaltungsbehörde.For kundene i Sveits:I henhold til sveitsiske forskrifter kan dette utstyret kun brukes i kanal (angi hvilke kanaler som er tillatt).Bruken av dette utstyret er underlagt en spesiell lisens som utstedes av nasjonale frekvensforvaltningsmyndigheter.Pour les clients résidant en Suisse:Conformément à la réglementation suisse, cet équipement fonctionne uniquement avec des canaux (spécifiez les canaux autorisés).L’utilisation de cet équipement est soumise à la licence individuelle accordée par les autorités d’administration des fréquences nationales.Voor klanten in Zwitserland:Volgens de Zwitserse wetgeving mag deze apparatuur alleen werken in kanalen (opgeven welke kanalen zijn toegestaan).
16Het gebruik van deze apparatuur is onderhevig aan een afzonderlijke licentie die is verleend door de nationale autoriteit voor frequentiebeheer.For kunderne i Schweiz:I henhold til schweizisk lovgivning kan dette udstyr kun fungere i kanaler (angiv, hvilke kanaler, der er tilladt).Brugen af dette udstyr er underlagt individuel licens givet at telemyndighederne.Per i clienti in Svizzera:In base alle norme vigenti in Svizzera, il presente apparecchio può essere utilizzato solo su canali (specificare i canali consentiti).L’uso di questo apparecchio è soggetto ad una licenza individuale accordata dall’Autorità per l’amministrazione delle frequenze nazionali.För kunderna i Schweiz:Enligt schweizisk lagstiftning får den här utrustningen endast användas med följande kanaler (ange vilka kanaler som är tillåtna).Användandet av den här utrustningen sker under enskilda licenser som utfärdas av den nationella myndighet som handhar frekvenstillstånd.Sveitsissä asuville asiakkaille:Sveitsissä voimassa olevien määräysten mukaan tätä laitetta saa käyttää ainoastaan kanavilla (ilmoita sallitut kanavat).Laitteiston käyttöön tarvitaan paikallisen viestintäviranomaisen myöntämä henkilökohtainen lupa.For the customers in Finland:According to Finnish regulation this equipment can only operate in channels (specify which channels are allowed).The use of this equipment is subject to individual license granted by the National Frequency Administration Authority.Für Kunden in Finnland:Gemäß den Vorschriften in Finnland kann dieses Gerät nur auf bestimmten Kanälen betrieben werden (zulässige Kanäle angeben).Der Gebrauch dieses Geräts unterliegt einer entsprechenden Lizenz von der nationalen Frequenzverwaltungsbehörde.For kundene i Finland:I henhold til finske forskrifter kan dette utstyret kun brukes i kanal (angi hvilke kanaler som er tillatt).Bruken av dette utstyret er underlagt en spesiell lisens som utstedes av nasjonale frekvensforvaltningsmyndigheter.Pour les clients résidant en Finlande:Conformément à la réglementation finlandaise, cet équipement fonctionne uniquement avec des canaux (spécifiez les canaux autorisés).L’utilisation de cet équipement est soumise à la licence individuelle accordée par les autorités d’administration des fréquences nationales.Voor klanten in Finland:Volgens de Finse wetgeving mag deze apparatuur alleen werken in kanalen (opgeven welke kanalen zijn toegestaan).
17Het gebruik van deze apparatuur is onderhevig aan een afzonderlijke licentie die is verleend door de nationale autoriteit voor frequentiebeheer.For kunderne i Finland:I henhold til finsk lovgivning kan dette udstyr kun fungere i kanaler (angiv, hvilke kanaler, der er tilladt).Brugen af dette udstyr er underlagt individuel licens givet at telemyndighederne.Per i clienti in Finlandia:In base alle norme vigenti in Finlandia, il presente apparecchio può essere utilizzato solo su canali (specificare i canali consentiti).L’uso di questo apparecchio è soggetto ad una licenza individuale accordata dall’Autorità per l’amministrazione delle frequenze nazionali.För kunderna i Finland:Enligt finsk lagstiftning får den här utrustningen endast användas med följande kanaler (ange vilka kanaler som är tillåtna).Användandet av den här utrustningen sker under enskilda licenser som utfärdas av den nationella myndighet som handhar frekvenstillstånd.Suomessa asuville asiakkaille: Suomessa voimassa olevien määräysten mukaan tätä laitetta saa käyttää ainoastaan kanavilla (ilmoita sallitut kanavat). Laitteiston käyttöön tarvitaan Viestintäviraston myöntämä henkilökohtainen lupa.For the customers in Iceland:The use of this equipment is subject to individual license granted by the National Frequency Administration Authority.Für Kunden in Island:Der Gebrauch dieses Geräts unterliegt einer entsprechenden Lizenz von der nationalen Frequenzverwaltungsbehörde.For kundene på Island:Bruken av dette utstyret er underlagt en spesiell lisens som utstedes av nasjonale frekvensforvaltningsmyndigheter.Pour les clients résidant en Islande:L’utilisation de cet équipement est soumise à la licence individuelle accordée par les autorités d’administration des fréquences nationales.Voor klanten in IJsland:Het gebruik van deze apparatuur is onderhevig aan een afzonderlijke licentie die is verleend door de nationale autoriteit voor frequentiebeheer.For kunderne i Island:Brugen af dette udstyr er underlagt individuel licens givet at telemyndighederne.Per i clienti in Islanda:L’uso di questo apparecchio è soggetto ad una licenza individuale accordata dall’Autorità per l’amministrazione delle frequenze nazionali.
18För kunderna i Island:Användandet av den här utrustningen sker under enskilda licenser som utfärdas av den nationella myndighet som handhar frekvenstillstånd.Islannissa asuville asiakkaille:Laitteiston käyttöön tarvitaan paikallisen viestintäviranomaisen myöntämä henkilökohtainen lupa.
19Table of ContentsTable of ContentsFeatures ........................................ 20Using the CD-ROM Manual ....... 21Preparations ........................... 21Reading the CD-ROM Manual ................................... 21Parts Identification ...................... 22Power Supply ............................... 24Installing the Batteries ........... 24Attaching the Supplied Accessories ................................... 25Replacing the Identification Ring ....................................... 25Setting the Transmission Channel ........................................ 25Selecting the Group/Channel .................................. 25Using the Wireless Remote Control Function ........................................ 26Pairing With a Receiver ........ 26Using the Encrypted Transmission Function ........................................ 28Using Secure Key Mode (SECURE KEY) .................... 28Using Password Mode (PASSWORD) ....................... 29Using a USB Keyboard ............... 30Basic Menu Operations ............... 31Setting Menus .............................. 32Naming of Microphone (NAME) ................................. 32Selecting the Group/Channel (GP/CH) ........................................ 33Selecting the Frequency Band (BAND) ................................. 33Setting the RF Output Power (RF POWER) ................................ 33Setting the Audio Input Level (INPUT LEVEL) ....................34Low-cut Filter Setting (LCF) ......................................34Power Save Setting (POWER SAVE) ....................................34Displaying the Accumulated Use Time (TIME) ..........................35Setting the Battery Type (BATTERY TYPE) ................35Setting the Encrypted Transmission Function (ENCRYPTION) ....................35Generating an Internal Signal (INTERNAL SG) ...................35Locking the POWER Switch (POWER SW LOCK) ............35Wireless Remote Control Function (RF REMOTE) .......36Setting the Brightness of the Display (BRIGHTNESS) .......36Automatic Dimming of the Display (DIMMER MODE) ..36Resetting Parameters to Their Factory Settings (FACTORY PRESET) ................................36Displaying the Software Version (VERSION) ............................36Block Diagram.............................. 37Troubleshooting ........................... 38Important Notes on Operation ...40Notes on Using the Microphone ............................40On Cleaning ...........................40Specifications ................................41
20 FeaturesFeaturesThe DWM-01 is a digital wireless hand-held microphone for a UHF synthesized wireless microphone system. This microphone is especially intended for vocalists at concerts or in studios.What are the strengths of a Digital Wireless Microphone System?This system has the following special features and qualities:• High-quality audio signal transmission approaching to the quality of wired microphone• Extremely tolerant to interference waves and secure wireless transmission• Simultaneous multi-channel operation• Encrypted transmission• Metadata transmission.Note that the DWM-01 digital wireless microphone cannot be used to transmit to analog wireless receivers.The features of this microphone are described below.Wide RF carrier frequency rangeThe DWM-01 microphone covers an extremely wide RF carrier frequency range. The U3040 and U4250 models (US models) can cover a 66-MHz band and 60-MHz band respectively — much wider than 24-MHz of the analog wireless microphone system, while the CE6267 model (European model) can cover a 48-MHz band. This remarkably wide coverage on a single model offers cost efficiency and operational convenience, because it allows one microphone to be operated in many different areas.Dynamic type and condenser typeAs a hand-held microphone that is appropriate for picking up the vocal, the DWM-01 comes in two types: dynamic type and condenser type.Compact, lightweight, and rugged designWith a solid, monocoque structure that is tolerant of fall or impact, this microphone can digitize the sound in the close proximity of its source. Even the delicate sounds like intake of breath of the vocalist are naturally processed.Capability of accepting wide range of sound pressure levelFor details, see “Setting the Audio Input Level (INPUT LEVEL)” on page 34.Selectable RF output power: 1 mW, 10 mW, and 50 mWFor details, see “Setting the RF Output Power (RF POWER)” on page 33.Power sleep modeFor details, see “Power Save Setting (POWER SAVE)” on page 34.Digital low-cut filterFor details, see “Low-cut Filter Setting (LCF)” on page 34.
21Using the CD-ROM ManualUsing the CD-ROM ManualThe supplied CD-ROM includes the Operating Instructions for the DWM-01 (English, French, German, Italian, Spanish, and Japanese versions) and the frequency lists (English and Japanese versions) in PDF format.PreparationsThe following program must be installed on your computer in order to read the Operating Instructions contained on the CD-ROM.• Adobe Reader Version 6.0 or higherMIf Adobe Reader is not installed, you can download it from the Adobe Systems Web site.Adobe and Adobe Reader are trademarks of Adobe Systems Incorporated in the United States and/or other countries.Reading the CD-ROM ManualTo read the Operating Instructions and frequency lists contained on the CD-ROM, do the following.1Insert the CD-ROM in your CD-ROM drive.A cover page appears automatically in your browser.If it does not appear automatically in the browser, double-click on the index.htm file on the CD-ROM.2Select and click on the Operating Instructions or the frequency lists that you want to read.This opens the selected PDF file.The files may not be displayed properly, depending on the version of Adobe Reader. In such a case, install the latest version you can download from the Adobe Systems Web site.If you have lost or damaged the CD-ROM, you can purchase a new one to replace it.MemoMemoNote
22 Parts IdentificationPartsIdentificationaWind screenbGripContains operation buttons, display section, and the battery holder.Open the grip to make settings or install the batteries.For details on how to open the grip, see “Installing the Batteries” on page 24.When the grip is open, the metal part of the grip obstructs the antenna for RF transmission and wireless remote control system. To transmit the signal or to use the wireless remote control function with this microphone, be sure to close the grip.cIdentification ringThe ring can be replaced with the ones supplied.This is useful when multiple microphones are used in the system.For details on how to replace the identification ring, see “Replacing the Identification Ring” on page 25.dAntenna coverHolds the antenna for RF transmission and wireless remote control function.ePOWER indicatorLights up green when the microphone is turned on. When the battery is exhausted, the indicator starts flashing.fUSB connector (Micro USB)Use this connector to connect an optional USB keyboard to carry out menu functions using key operations. By connecting the digital wireless receiver to this connector with the supplied USB cable, you can exchange the encryption key for encrypted transmission function.g + or – buttonSelects functions or values shown on the display.Holding down the – button while switching on the microphone activates the pairing operation for the wireless remote control function.hSET buttonAdjusts displayed function settings and enters the value.Holding down the SET button while switching on the power turns the microphone on without sending a signal.NoteInside the gripFrontSideBottom of the antenna cover
23Parts IdentificationiDisplay sectionARF transmission indicationIndicates the current transmission status.:Currently transmitting—: Transmission stoppedBRF (radio frequency) transmission power indicationIndicates the current transmission power setting. You can change the setting with the RF transmission power setting function.H: transmitting at 50 mWM: transmitting at 10 mWL: transmitting at 1 mWCAudio input level meterIndicates the signal input level.DReference level gaugeIndicates the reference input level. When the attenuation is 0 dB, 94 dBSPL is indicated.EPeak indicatorWarns of excessive input by lighting up when the signal is 3 dB below the level at which distortion begins.FPOWER switch lock indicatorIndicates that the POWER switch is locked, preventing the microphone from being accidentally turned off or on.For details, see “Locking the POWER Switch (POWER SW LOCK)” on page 35.GWireless remote control condition indicationIndicates the signal transmission condition of the wireless remote control function (4 levels).: Good transmission: Somewhat good transmission: Somewhat poor transmission: Poor transmission: Unable to communicate with paired receiverWhen the wireless remote control function is off, this indication does not appear.HBattery indicationShows the battery condition.For details, see “Battery indication” on page 24.IMenu display sectionThe status of 17 different functions are displayed here. To select the function, press the + or – button repeatedly.For details, See “Setting Menus” on page 32.jPOWER switchTurns the microphone ON or OFF.kBattery compartmentAccommodates two LR6 (size AA) alkaline batteries.For details on how to insert the batteries, see “Power Supply” on page 24.
24 Power SupplyPower SupplyThe microphone can operate on two LR6 (size AA) alkaline batteries continuously for about 5 hours at 25°C (77°F).Installing the Batteries1Turn the grip in the direction of the arrow, and pull down the grip until the battery compartment is shown.2Insert two new LR6 (size AA) alkaline batteries, making sure the polarities are correct.To prevent the batteries from touching each other, push in the second battery against the spring tension.Squeezing the batteries into the compartment while two batteries are touching may damage the battery packages.3Close the grip and turn it in the reverse direction in the step 1 above.Battery indicationThe power status is indicated by eight level indications. Replace both batteries when the battery indication starts to flash.Be sure to check the expiration date printed on the new batteries before using them.• When BATTERY TYPE is set to TYPE1, the power status is indicated based on the use of new LR6 (size AA) Sony Alkaline batteries. An incorrect indication may result when a different kind of batteries, a different brand of batteries or old batteries are used. If you plan to use other kind of batteries than alkaline, set the BATTERY TYPE function according to the type of batteries to be used.• If you plan to use the microphone for a long period of time, it is recommended that you replace the batteries with brand new ones.For details on BATTERY TYPE setting, “Setting the Battery Type (BATTERY TYPE)” on page 35.NoteNotes
25Attaching the Supplied Accessories / Setting the Transmission ChannelAttaching the SuppliedAccessoriesReplacing the Identification RingA black ring is attached at the factory.When multiple microphones are used in the system, identification rings with different colors are useful to distinguish a microphone from another.Setting the Transmission ChannelThe microphone provides groups of interference-free channels. When using multiple microphones and transmitters at the same time (simultaneous multi-channel operations) within the same area, selecting the same group and using a channel within that group can prevent signal interference.To set the transmission channel on the microphone, first you select the group and channel using the RF indicator and scanning functions on the receiver. Next you set the group and channel parameters to match the setting on the receiver.Selecting the Group/Channel• Before doing this procedure, use the BAND function (see page 33) to set the microphone to the bandwidth of the receiver you are using.• The setting for this function cannot be changed during actual signal transmission. Set the microphone group (GP) and channel (CH) as follows:For details on groups and channels, refer to “Sony Digital Wireless Microphone System Frequency Lists” on the supplied CD-ROM.For details on menu operation, see “Basic Menu Operations” on page 31.Rotate and remove the ring holder to replace the identification ring.Notes
26 Using the Wireless Remote Control Function1Turn off the power, and then while holding down the SET button, turn the power on.The signal transmission stops.2Press the + or – button repeatedly until the GP/CH indication is displayed.3Hold down the SET button until the item to be set flashes.4Press the + or – button repeatedly to select a group.5Press the SET button to enter the group.The channel indication starts flashing.6Press the + or – button repeatedly to select a channel.7Press the SET button to enter the channel.To start signal transmission with the selected channel, turn off the power and then turn it on again.To set the group/channel using the pairing mode of the wireless remote control functionWhen the microphone is paired with the receiver, the transmission channel of the microphone is set to the receiving channel on the receiver automatically.For details, see“Pairing With a Receiver” on page 26.Using the Wireless Remote Control FunctionThis microphone is equipped with a wireless remote control function that can be used to set the parameters (low-cut filter, attenuation operation, power save mode, etc.) of the microphone through the receiver or other devices. This function makes it easier to operate and manage the microphone system while in the field.This wireless control is 2.4 GHz IEEE802.15.4 compliant and has no effect on the RF band of digital wireless audio.This function is activated when pairing is established between the microphone and the receiver using the RF REMOTE function. Pairing must be done first before the wireless remote control function can be used.Pairing With a ReceiverPairing links the microphone with the receiver which the wireless remote control function is to be used.When the microphone has been paired with a receiver through the receiver operation, turning on the microphone while holding down the – button establishes the pairing immediately.To carry out pairing through menu operations on the microphone, do the following.Note
27Using the Wireless Remote Control Function1Set the receiver to be used for controlling the microphone to pairing mode.For details, refer to the operating instructions supplied with the receiver.2Press the + or – button repeatedly until the RF REMOTE indication is displayed.3Hold down the SET button until the item to be set flashes.4Press the + or – button repeatedly to select PAIRING.5Press the SET button to enter.The microphone sends a pairing request to the receiver which is on pairing mode.Before established pairing, if you press any operation key on the microphone, pairing mode will be cancelled.When pairing has been established, the wireless remote control condition level (indicated by ) goes up, RF REMOTE turns on, and the remote control function becomes operative.When “Pairing fail” is displayed• Successful communication between the microphone and the receiver did not occur within a given amount of time. Perform pairing again.• Pairing has been performed with the grip open. When the internal antenna is covered with the grip, pairing may not be carried out. After setting the microphone ready for pairing in step 5 above, be sure to close the grip.To use the wireless remote control function with a previous pairingIn the RF REMOTE indication, select ON.• When you set RF REMOTE to ON, the microphone will communicate with the receiver to which it was previously paired. To use the wireless remote control function with another receiver, you must perform the pairing procedure for that receiver.• Multiple microphones/transmitters cannot be paired with the same receiver.• If you reset all parameters by using the FACTORY PRESET function (see page 36), the pairing setting of the microphone is also cleared.The following microphone settings can be done from the wireless remote control:• Frequency band/group/channel selection• RF transmission power setting• Attenuator for the audio input setting• Low-cut filter setting• Power save settingFor details on menu operation, see “Setting Menus” on page 32.To cancel the wireless remote control functionIn the RF REMOTE indication, select OFF.Notes on the wireless remote control functionThe wireless remote control function on the microphone uses the 2.4-GHz band and may thus be subject to interference from other devices.• When pairing fails (“Pairing fail” is displayed), successful communication Notes
28 Using the Encrypted Transmission Functionbetween the microphone and the receiver has not occurred within a given amount of time. Pairing may be harder to do when another receiver is engaged in pairing nearby. • When it becomes hard to use the remote control, the remote control may be improved by switching the wireless remote control function off, then on again in the RF REMOTE display, then re-pairing with the microphone (change to a channel with less interference).Using the Encrypted Transmission FunctionTo prevent hacking of the signal, the microphone scrambles the signal during transmission. To use this function, select one of the following encrypted transmission modes:Secure key mode: An encryption key that is automatically generated by the microphone is used by both the microphone and receiver in this one-to-one encrypted transmission method.Password mode: You choose a password of up to eight characters that can be set for multiple microphones/transmitters and receivers. This enables encrypted transmission within a group. Make sure the same mode is set on the microphone/transmitter and receiver.Using Secure Key Mode (SECURE KEY)Use this mode for one-to-one encrypted transmission between one microphone and one receiver.An encryption key that cannot be read from the outside is automatically generated by the microphone. This key is transmitted to the receiver through a USB connection or the RF REMOTE function, enabling encrypted transmission to take place.Note
29Using the Encrypted Transmission FunctionThe encryption key used by the microphone and receiver is newly generated for each key transmission, resulting in highly secure communication.The encryption key used between the microphone and the receiver is saved when the power is turned off, so the encrypted transmission can be resumed the next time the power is turned on.1Preparing the microphone (this unit)1Hold down the SET button until the item to be set flashes in ENCRYPTION indication on the microphone.2Press the + or – button repeatedly to select SECURE KEY, and then press the SET button.2Preparing the receiverSelect SECURE KEY on the receiver that receives the encryption key.For details on receiver operations, refer to the operating instructions supplied with the receiver.3Exchanging the encryption keyOn the receiver, select USB or REMOTE (wireless remote) as the method for encryption key exchange.When the RF REMOTE function is off, REMOTE cannot be selected.When the receiver does not support encryption key exchange through USB connection, select REMOTE.For details on the receiver, refer to the operating instructions supplied with the receiver.When you select USB: Connect the microphone to the receiver with the supplied USB cable and USB adapter cable.For details on receiver operations, refer to the operating instructions supplied with the receiver.When you select REMOTE: The microphone searches for a receiver that it has been paired with. After the microphone detects the receiver, the microphone exchanges the encryption key with receiver and encrypted transmission begins.Using Password Mode (PASSWORD)Set this mode when multiple microphones/transmitters are paired with multiple receivers for encrypted transmission.If both microphones/transmitters and receivers are set with the same user-designated password, the audio signal can be decoded. This mode is useful when multiple microphones/transmitters and receivers are used as a single group, or when the audio signal from one microphone/transmitter is received by multiple receivers at the same time.NoteUSB cable (supplied)USB adapter cable(supplied)
30 Using a USB Keyboard1Hold down the SET button until the item to be set flashes in the ENCRYPTION indication on the microphone.2Press the + or – button repeatedly to select PASSWORD, and then press the SET button.3Input a password of up to eight characters on the microphone.To enter a password, use the procedure described in “Naming of Microphone (NAME)” on page 32.4Set the encrypted transmission function setting on the receiver to PASSWORD.5Set the same password that was set on the microphone.For details on receiver operations, refer to the operating instructions supplied with the receiver.It is recommended that you change the password periodically.Using a USB KeyboardConnecting an optional USB keyboard to the microphone allows you to perform menu operations and enter your name and password for the encrypted transmission function from the keyboard.A Micro USB connector is used on the microphone. For this reason, use the supplied USB adapter cable.Menu operations with a USB keyboardYou can use a USB keyboard to perform the same menu operations that you do on the microphone.The microphone buttons correspond to the following keys on a USB keyboard:To enter a textWith a USB keyboard, you can enter names and passwords for encrypted transmissions.NoteButtons on the microphoneUSB keyboardSET ENTER+R–rUSB adapter cable (supplied)
31Basic Menu OperationsCharacters that can be entered from a USB keyboard: (space), 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, !, #, &, $, @, +, -, =, _, (, ), [, ](Passwords may consist of the numbers 0 to 9 and letters A to Z only.)Special key: Backspace (BS) and Delete (DEL) keys. • The number keys on the keyboard cannot be used.• This microphone is compatible with English-language keyboards only.• USB keyboards with multiple functions, such as USB hub and pointing device, cannot be used.• Power to the connected keyboard is supplied by the USB connector on the microphone. The power rating is 100 mA. Keyboards that consume more power than that cannot be used.• Do not leave the microphone connected to the keyboard when not in use. If you do, the batteries in the microphone will be drained more quickly.• Text editing should be done with the alphabet, BS, DEL, and Enter keys.Basic Menu Operations1Press the + or – button repeatedly until the function to be set appears.2Hold down the SET button until the item to be set flashes.3Press the + or – button to change the setting.4Press the SET button to enter the setting.Types of menu:• NAME (microphone name) setting • BAND (frequency band) selection• GP/CH (group/channel) selection• RF POWER (RF transmission power) setting• INPUT LEVEL (audio input level) setting• LCF (low-cut filter) setting• POWER SAVE setting• TIME (accumulated use time) indication• BATTERY TYPE (battery type) setting• ENCRYPTION (encrypted transmission function) setting• INTERNAL SG (internal signal generator) function• POWER SW LOCK (POWER switch lock) function• RF REMOTE (wireless remote control) functionNotesFunction nameItem to be set
32 Setting Menus• BRIGHTNESS (display brightness) setting• DIMMER MODE (automatic dimming of the display) setting• FACTORY PRESET (factory setting) function• VERSION (software version) indicationSetting MenusThe functions and parameters of the settings menu are explained here. Underlined items are the factory setting.Naming of Microphone (NAME)You can specify a microphone name of up to 16 characters. The factory setting for the microphone name is the model name and serial number. The microphone name is sent to the receiver as metadata and is used by the receiver to distinguish between different microphones/transmitters.+: The first press on the + button displays the character set. You can then use the + and – buttons to select the desired character. And then, pressing the SET button adds the selected character to the end of the current name.– : Deletes the last character in the current name.SET: Enters the character or edited name.You cannot insert or delete a character in the middle of the name.To edit with a keyboardYou can enter data from an optional keyboard connected to the USB connector.For details, see “Using a USB Keyboard” on page 30.Note
33Setting MenusSelecting the Group/Channel (GP/CH)The factory settings are as follows:US modelsU3040: 00 3001 566.125MHzU4250: 00 4201 638.125MHzEuropean modelCE6267: 00 6201 798.125MHzFor details, see “Selecting the Group/Channel” on page 25.Using wireless remote control, this function can be controlled from the receiver and other devices.For details on wireless remote control function, see “Using the Wireless Remote Control Function” on page 26.Selecting the Frequency Band (BAND)Match the frequency range on this microphone to that of the Sony digital wireless receiver.The frequency range that can be set for the optional receiver combined with this microphone differs as follows:US models3040UTV30-33, TV34-36, TV38-41Not available for TV374250UTV42-45, TV46-49, TV50-51European model6267CETV62-64, TV67-69Not available for TV65 and TV66For details about the frequency range of each band, refer to “Sony Digital Wireless Microphone System Frequency Lists” on the supplied CD-ROM.Using wireless remote control, this function can be controlled from the receiver and other devices.For details on wireless remote control function, see “Using the Wireless Remote Control Function” on page 26.• The setting for this function cannot be changed during actual signal transmission. To change the setting, turn off the microphone first. Then, while holding down the SET button, turn the power on. Then change the setting after the signal transmission has stopped.• Be sure to select the group/channel right after selecting the frequency band. To start signal transmission with the selected frequency band/group/channel, turn off the power and then turn it on again.Setting the RF Output Power (RF POWER)You can set the RF output power.1 mW (LOW): transmitted by 1 mW10 mW (MID): transmitted by 10 mW50 mW (HIGH): transmitted by 50 mW • The setting for this function cannot be changed during actual signal transmission. To change the setting, turn off the microphone first. Then, while holding down the SET button, turn the power on. And then, change the setting after the signal transmission has stopped.• To start signal transmission with the selected RF output power setting, turn off the power and then turn it on again.NotesNotes
34 Setting MenusUsing wireless remote control, this function can be controlled from the receiver and other devices.For details on wireless remote control function, see “Using the Wireless Remote Control Function” on page 26.Setting the Audio Input Level (INPUT LEVEL) You can set the input level to the analog head amp.Press the + or – button repeatedly to select the appropriate attenuation level.The reference levels for the various settings are as follows:Using wireless remote control, this function can be controlled from the receiver and other devices.For details on wireless remote control function, see “Using the Wireless Remote Control Function” on page 26.Low-cut Filter Setting (LCF)The frequency of the low-cut filter can be set.OFF:Turns off the low-cut filter.20 30 40 50 60 70 80 90 100120 140 160 180 200 220 (Hz): Low-cut filter is set according to the selected frequency.Using wireless remote control, this function can be controlled from the receiver and other devices.For details on wireless remote control function, see “Using the Wireless Remote Control Function” on page 26.Power Save Setting (POWER SAVE)To conserve power, this setting allows you to put all microphone functions to sleep.ACTIVE:The microphone operates normally.SLEEP: The sleep function is on. During sleep, the POWER indicator flashes at 2-second intervals.To change back to normal operationDuring sleep, press the SET, +, or – button.You can also use the wireless remote control to change the receiver back to normal operation.Input Attenuation (dB)Reference input level (dB SPL)Maximum input level (dB SPL)Headroom (dB)MIC 0 94 130 36397 133610013691031393 dB step 3 dB step 3 dB step18 112 14821 115 151
35Setting MenusFor details on wireless remote control function, see “Using the Wireless Remote Control Function” on page 26.Displaying the Accumulated Use Time (TIME)You can display the accumulated battery use time as a rough estimate of total microphone usage.The factory setting is “00:00”.To reset the accumulated time indication1Hold down the SET button until the time indication flashes.2Press the – button so “00:00 RESET” appears, and then press the SET button.Setting the Battery Type (BATTERY TYPE)Set this item according to the type of batteries you use to obtain accurate battery power status indication.TYPE1:The power status is indicated based on characteristics of new LR6 (size AA) Sony Alkaline batteries. Select this for LR6 (size AA) alkaline batteries.TYPE2: Select this for rechargeable nickel-metal-hydride batteries.TYPE3: Select this for lithium batteries.The characteristics of batteries change according to battery type and environmental conditions. It is recommended that you learn the characteristics of batteries you use before using them.Setting the Encrypted Transmission Function (ENCRYPTION)You can set the encrypted transmission function.SECURE KEY: Sets the secure key method.PASSWORD: Sets the password method.OFF: The encrypted transmission function is not used.For details, see “Using the Encrypted Transmission Function” on page 28.Generating an Internal Signal (INTERNAL SG)This microphone generates a 1-kHz reference level sine wave that can be used to adjust or check the audio level of the receiver or the system that you are using. This internal signal is outside the control of the attenuator.1 kHz: A 1-kHz internal signal is generated.OFF: An internal signal is not generated.If the microphone is turned off while the reference signal function is on, the function will turn off automatically.Locking the POWER Switch (POWER SW LOCK)The POWER switch can be locked to prevent the microphone from being accidentally turned off or on.Even when the POWER switch is locked, all parts of the microphone other than the POWER switch remain functional.NoteNote
36 Setting MenusUNLOCK:The POWER switch is not locked.LOCK: The POWER switch is locked.When LOCK is selected, the POWER switch lock icon appears in the display.Wireless Remote Control Function (RF REMOTE)This function must be set to allow the wireless remote control function to be used between the microphone and receiver.OFF: Stops the wireless remote control function.ON: Starts the wireless remote control function with the previously paired receiver.PAIRING: Executes a new pairing.For details, see “Pairing With a Receiver” on page 26.Setting the Brightness of the Display (BRIGHTNESS)Ten levels of brightness can be selected for the organic light-emitting diode display.The selectable settings are the following:(Dark) 1 2 3 4 5 6 7 8 9 10 (Bright)Automatic Dimming of the Display (DIMMER MODE)The organic light-emitting diode display can be set to dim or turn off after a certain amount of time.AUTO OFF: The display turns off after 30 seconds. The display goes on again when you press the SET, +, or – button.AUTO DIMMER: The display dims after 30 seconds. The display becomes bright again when you press the SET, +, or – button.ALWAYS ON: The display stays on at the brightness level set with the BRIGHTNESS function.Resetting Parameters to Their Factory Settings (FACTORY PRESET)All parameter settings can be returned to their factory settings.Holding down the SET button until a message appears asking for confirmation. Press the + or – button repeatedly to select YES, and then press the SET button to enter. The microphone parameters are reset to their factory settings. • The setting for this function cannot be changed during actual signal transmission. To change the setting, turn off the power first. Then while holding down the SET button, turn the power on. Then change the setting after the signal transmission has stopped.• To start signal transmission with the factory parameter settings, turn off the power and then turn it on again.Displaying the Software Version (VERSION)The version of the microphone software can be displayed.Notes
37Block DiagramBlock DiagramAttenuatorHead amp.A/D converterInternal SGAudio codec modulatorHigh-frequency circuitLow-cut filterDigital signal processorMicrophone capsule  Regarding the block diagram on this page  We have submitted the long term's confidentiality request   about block diagram. Therefore we removed the block diagram from this page.
38 TroubleshootingTroubleshootingIf you encounter a problem using this microphone, use the following checklist to find a solution. For any problems with the receiver, refer to the operating instructions supplied with the receiver. If the problem persists, consult your Sony dealer.Symptom Meanings RemedyThe microphone does not turn on.The batteries are inserted backwards in the battery compartment.Reinsert the batteries with the correct orientation (see page 24).The batteries are exhausted. Replace the batteries with new ones.The batteries drain quickly.Manganese batteries are being used.Use alkaline batteries.The microphone is being used under cold conditions.The batteries drain quickly under cold conditions.Interruptions in the reception occurs.The microphone is too far from the receiver.Decrease the distance to the receiver and check the reception. The transmission power setting is set to “L: 1mW”.Increase the transmission power (see page 33).There is no sound.The channel setting on the microphone is different from that on the receiver.Use the same channel setting on both the microphone and receiver.The setting of the encrypted transmission function on the receiver is different from that on the microphone.Confirm that the setting of the encrypted transmission function is the same on both the microphone and the receiver (see page 28).The sound is weak. The attenuator is set too high for the audio input level of the microphone.While monitoring the audio input level meter on the microphone or the receiver, set the attenuator to an appropriate level (see page 34).There is distortion in the sound. The attenuator is set too low for the audio input level of the microphone.The bass is weak.The frequency of the low-cut filter is set too high.While monitoring the sound, decrease the low-cut filter frequency to a level that produces the proper sound quality (see page 34).
39TroubleshootingThere is too much bass.The microphone produces excessive bass because the frequency response of the microphone extends into the low range.Use the low-cut filter to cut the bass (see page 34).The power does not turn off even though the POWER switch is turned to OFF.The POWER switch is locked. Turn off the POWER SW LOCK function (see page 35).Wireless remote control is not possible.Pairing has not been established between the microphone and receiver.Carry out pairing (see page 26).The receiver is too far from the microphone for communication to occur.Check the wireless remote control condition level. If it is low, decrease the distance between the microphone and the receiver (see page 23).The microphone that was paired with the receiver has been paired with another receiver.On the receiver, carry out pairing again with the microphone that you want to control.The USB keyboard does not work.You are using a USB keyboard that is not compatible with the microphone.Check the conditions for using a USB keyboard with the microphone (see page 30).The display is too dark.The display brightness is set to low.Adjust the brightness of the display (see page 36).Symptom Meanings Remedy
40 Important Notes on OperationImportant Notes on OperationNotes on Using the Microphone• The digital wireless microphone system product must be used within a temperature range of 0°C to 50°C (32°F to 122°F).• Operating the microphone near electrical equipment (motors, transformers, or dimmers) may cause it to be affected by electromagnetic induction. Keep the microphone as far from such equipment as possible.• The presence of the lighting equipment may produce electrical interference over the entire frequency range. Position the microphone so that interference is minimized.• To avoid degradation of the signal-to-noise ratio, do not use the microphone in noisy places or in locations subject to vibration, such as the following:- near electrical equipment, such as motors, transformers or dimmers- near air conditioning equipment or places subject to direct air flow from an air conditioner- near public address loudspeakers- where adjacent equipment might knock against the tunerKeep the microphone as far from such equipment as possible or use buffering material.On Cleaning• If the microphone is used in a very humid or dusty place or in a place subject to an active gas, clean its surface as well as the connectors with a dry, soft cloth soon after use. Lengthy use of the microphone in such places or not cleaning it after its use in such places may shorten its life.• Clean the surface and the connectors of the microphone with a dry, soft cloth. Never use thinner, benzene, alcohol or any other chemicals, since these may mar the finish.Notes on Simultaneous Multi-Channel Operation• Keep the microphone at least 30 centimeters (11 7/8inches) away from another microphone/transmitter.• When only digital wireless microphones are being used, keep the microphone at least 4 meters (13 feet) away from the antenna of a receiver for up to 10 channels, and at least 6 meters (20 feet) away for 11 or more channels.• When a mixture of digital and analog wireless microphones/transmitters is being used, keep the microphone at least 6 meters (20 feet) away from the antenna of a receiver.• This system should be kept at least 100 meters (328 feet) away from any analog wireless systems using the same frequency when both are being used in a wide area with no walls or obstructions.• If you experience noise, increase the distance between the microphone and receiver or decrease the transmission power on the microphone.
41SpecificationsSpecificationsTransmitting sectionOscillator typeCrystal-controlled PLL synthesizerCarrier frequenciesUS models: U3040: 566 to 607 MHz (TV-30 to TV-36 channels); 615 to 638 MHz (TV-38 to TV-41 channels)U4250: 638 to 698 MHz (TV-42 to TV-51 channels)European model: CE6267: 798 to 822 MHz (TV-62 to TV-64 channels); 838 to 862 MHz (TV-67 to TV-69 channels)Channel stepUS models: U3040/U4250: 125 kHzEuropean model: CE6267: 25 kHzRF power output1 mW/10 mW/50 mW (e.r.p) selectableAntenna typeHelical antennaOccupied RF bandwidth192 kHz or lessAudio delay1.5 msAllowable deviation of transmission frequency±6.5 ppmType of emissionG1E or G1DModulation methodπ/4 Shift QPSKAudio sectionMicrophone typeTo prevent electromagnetic interference from portable communication devicesThe use of portable telephones and other communication devices near the DWM-01 may result in malfunction and interference with audio signals. It is recommended that portable communication devices near the DWM-01 be turned off.
42 SpecificationsDynamic type: unidirectional (Super cardioid)Electret condenser type: unidirectional (Cardioid)Maximum input level151 dBSPL (with 21 dB attenuator)Audio attenuator adjustment range (pad) 0 to 21 dB (3 dB steps)Frequency responseDynamic type: 60 Hz to 18,000 HzElectret condenser type: 60 Hz to 20,000 HzSignal-to-noise ratioDynamic type: 70 dB or moreElectret condenser type: 66 dB or more(A-weighted, 94 dBSPL, 1kHz)GeneralOperating voltage3 V DC, with two LR6 (AA) alkaline batteriesBattery lifeContinuous operating time 5 hours (at 25 °C (77 °F), 10-mW output using Sony LR6 (AA)-size alkaline batteries with the wireless remote control function off and DIMMER MODE set to AUTO OFF)Operating temperature0 to 50 °C (32 to 122 °F)Storage temperature–20 to +60 °C (–4 to +140 °F)Wireless remote control2.4-GHz IEEE802.15.4 compliantDimensions (unit: mm (inches))Mass Dynamic type: approx. 323 g (11 oz)Electret condenser type: approx. 297g (10oz)including batteriesSupplied accessoriesIdentification ring (1 set)Microphone holder (1)USB adapter cable (1)USB cable (1)Carrying case (1)Stand adaptor (1)For the model available in the U.S.A.: PF1/2 to W5/8 typeFor the model available in Europe.: PF1/2 to W3/8 typeOperating Instructions (1)CD-ROM (1)Design and specifications are subject to change without notice.* Dynamic type: 257 mm (10 1/8 inches)Electret condenser type: 249 mm (9 7/8inches)
43SpecificationsNoteAlways verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
Sony CorporationPrinted in Japan

Navigation menu