Sony Group CECHZCM1 Wireless Controller User Manual CECH ZCM1U D CECH ZCM1E D

Sony Corporation Wireless Controller CECH ZCM1U D CECH ZCM1E D

Contents

User Manual 1 of 2

CECH-ZCM1U DCECH-ZCM1E DMotion controller for Reference ToolWARNINGCarefully read this instruction manual and the instruction manualfor the compatible hardware (Development/Verification Tool forPlayStation3) before using this product. The compatible hardware’sinstruction manual contains safety precautions for the prevention ofaccidents, and instructions for the use and handling of the hardware.Do not allow the battery to come into contact with fire or subject itto extreme temperatures such as in direct sunlight, in a vehicleexposed to the sun or near a heat source.•When using the motion controller, avoid holding the controllercloser than 8 inches from the face or eyes.Caution•Attach the supplied strap and wear it on your wrist.•Hold the controller firmly and avoid swinging it with excessiveforce, especially when using it with another controller.•Before use, make sure there is plenty of space around you.For Customers in the U.S.A. / Notice réservée aux utilisateursrésidant aux États-UnisThis equipment complies with FCC radiation exposure limits setforth for uncontrolled equipment and meets the FCC radio frequency(RF) Exposure Guidelines in Supplement C to OET65. Thisequipment has very low levels of RF energy that are deemed tocomply without testing of specific absorption ratio (SAR). Thistransmitter must not be co-located or operated in conjunction withany other antenna or transmitter.NOTE:This equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:–Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.–Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.–Consult the dealer or an experienced radio/TV technician for help.Instruction Manual SCE CONFIDENTIALYou are cautioned that any changes or modifications not expresslyapproved by the party responsible for compliance could void theuser’s authority to operate the equipment.If you have questions about this product, call our technical supportline at 1-800-345-7669, or write to:Sony Computer Entertainment AmericaConsumer Services/Technical SupportPO Box 5888, San Mateo, CA 94402-0888 U.S.A.Declaration of ConformityTrade Name: SONYModel No.: CECH-ZCM1U DResponsible Party: Sony Electronics Inc.Address: 16530 Via Esprillo, San Diego, CA 92127U.S.A.Telephone No.: 858-942-2230This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) this device may notcause harmful interference, and (2) this device must accept anyinterference received, including interference that may causeundesired operation of this device.For customers in CanadaThis Class B digital apparatus complies with Canadian ICES-003.This device complies with RSS-Gen of IC Rules. Operation is subjectto the following two conditions: (1) this device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.This equipment complies with IC radiation exposure limits set forthfor uncontrolled equipment and meets RSS-102 of the IC radiofrequency (RF) Exposure rules. This equipment has very low levelsof RF energy that it is deemed to comply without testing of specificabsorption ratio (SAR).Pour les clients du CanadaCet équipement numérique de Classe B est conforme à la normecanadienne NMB-003.Cet appareil est conforme aux stipulations CNR-Gen des règles IC.Son opération est sous réserve des deux conditions suivantes : (1) cetappareil ne peut pas causer de brouillage préjudiciable et (2) cetappareil doit accepter le brouillage préjudiciable reçu,y compris unbrouillage qui pourrait causer son fonctionnement irrégulier.Cet équipement est conforme aux limites d’exposition aux radiationsimposées pour tout équipement non contrôlé, et est conforme auxrègles IC d’exposition des radiofréquences (RF) définies par CNR-102. Cet équipement émet des niveaux très bas de RF jugésconformes sans avoir subi le test de débit d’absorption spécifique(SAR).For customers in EuropeThe manufacturer of this product is Sony Computer EntertainmentInc., 2-6-21 Minami-Aoyama, Minato-ku Tokyo, 107-0062 Japan.The Authorised Representative for EMC and product safety is SonyDeutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,Germany.Distributed in Europe by Sony Computer Entertainment Europe Ltd,10 Great Marlborough Street, London, W1F 7LP, United Kingdom.4-194-160-11(1)
Where you see this symbol on any of our electrical products/packaging in Europe, it means that at end of life the product/battery must be disposed of in accordance with any applicable lawsor requirements for the separate disposal of electrical equipment/batteries. This symbol may be used on batteries in combinationwith additional chemical symbols. The chemical symbols formercury (Hg) or lead (Pb) will appear if the battery contains morethan 0.0005% mercury or more than 0.004% lead. Accordingly atend of life we will arrange for separate disposal of our loanequipment including without limitation development kits whichremain at all times the property of Sony Computer EntertainmentEurope. If you would like assistance with the disposal of any otherelectrical products which we have supplied to you for business use,we can arrange a take-back service on request. Please checkhttps://www.tpr.scee.net for more information.This product contains a battery which is permanently built-in forsafety, performance or data integrity reasons. The battery shouldnot need to be replaced during the lifetime of the product andshould only be removed by skilled service personnel. To ensure thecorrect waste treatment of the battery, please dispose of thisproduct as electrical waste.This product may fall within the scope of national export controllegislation. You must comply fully with the requirements of suchlegislation and of all other applicable laws of any jurisdiction inrelation to this product.DescriptionThis product is designed only for use with the Development/Verification Tool for PlayStation3. For detailed instructions onuse, refer to the instruction manual of the compatible hardware orvisit your local technical support Web site.Battery (supplied)•Charge in an environment where the temperature range isbetween 10°C - 30°C (50°F - 86°F). Charging may not be aseffective when performed in other environments.•Battery duration may vary depending on the usage condition andenvironmental factors.•The battery has a limited lifespan. Battery charge durationgradually decreases with repeated usage and age. Battery life alsovaries depending on the storage method, usage state,environment and other factors.When disposing of the motion controllerWhen disposing of the motion controller, remove the battery andfollow local regulations regarding disposing of batteries.© 2010 Sony Computer Entertainment Inc. All rights reserved.StrapPrinted in ChinaNoticeOther than when disposing of the motion controller, never removethe screws and never remove the battery from the motioncontroller.CautionDo not handle damaged or leaking Lithium-Ion batteries.SpecificationsCompatible hardwareDevelopment/Verification Tool forPlayStation3*Power consumption DC 5 V, 800 mAOperating temperature 5°C - 35°C (41°F - 95°F)Mass Approx. 145 g (5.1 oz )(without the cable)External dimensions Approx. 200 mm × 46 mm(excluding maximum (7.9 in. × 1.8 in.)projecting part) (height × diameter)Supplied items Instruction manual × 1Strap × 1*For details on the Development/Verification Tool, visit your localtechnical support Web site.Design and specifications are subject to change without notice.Contact informationFor more information on this product, visit your local technicalsupport Web site or contact your local service dealer.Limitations of liabilityThis product is supplied pursuant to and subject to the terms of thetool loan agreement with Sony Computer Entertainment Inc. or itsaffiliates. Other than as expressly set forth by SCEI and/or any ofits affiliates, except to the extent prohibited by applicable laws,SCEI and/or any of its affiliates shall not be liable for any damages,including special, incidental or consequential damages, or feesarising out of the use or inability to use this product." " and "PlayStation" are registered trademarks of SonyComputer Entertainment Inc."SONY" and " " are registered trademarks of Sony Corporation.

Navigation menu