Sonova USA TX17 remote microphone for hearing impaired people User Manual

Phonak Inc remote microphone for hearing impaired people

User Manual

www.phonak.com/phonak-roger029-0267-02/V1.00/2013-08/A+W Printed in Vietnam © Phonak AG All rights reservedManufacturer:Phonak Communications AGLaenggasse 17CH-3280 MurtenSwitzerlandEU Representative:Phonak GmbHD-70736 Fellbach-OeffingenGermany
2 1. Welcome 4 2. Getting to know your Roger Pen 6 2.1 Check the package content 6 2.2 How your Roger Pen works 7 2.3 Descriptions of the devices 8 2.4 Indicator lights (LED status) 9 3. Getting started 10 3.1 Setting up the docking station 10 3.2 Charging your Roger Pen 15 3.3 Switching on and o 18 3.4 Using your Roger receiver 19 3.5 Connecting a receiver 20 3.6 Using the buttons 22 4. Using Roger Pen 23 4.1 Attaching the lanyard 26 4.2 Connecting to multimedia devices 28 4.3 Using Bluetooth 30 4.4 Using Roger Pen during phone calls 31Contents
3 5. Special functions 39 5.1 Mute 39 5.2 Manual microphone modes 39 5.3 Disconnecting Roger devices 41 5.4 Verication mode 41 6. Adding additional microphones 43 6.1 Connect 43 6.2 Using additional microphones 46 7. Introducing Bluetooth 49 7.1 What is Bluetooth? 49 7.2 Using a Bluetooth devices 51 7.3 Setting up Bluetooth 53 7.4 Unpairing Bluetooth devices 57 8. Troubleshooting 58 9. Important information 6410. Service and warranty 7011. Information and explanation of symbols 72
4Congratulations on choosing the Roger Pen from Phonak.This universal, cutting-edge wireless microphone helps people with a hearing loss to understand more speech in noise and over distance. Designed with discretion in mind, the Roger Pen features adaptive wireless transmission, fully automated settings, wideband audio Bluetooth for cell phone use, TV connectivity and an audio input for listening to multimedia. It can also be used alongside other Roger Clip-On Mics and Roger Pens in a microphone network.Your Roger Pen is a Swiss premium-quality productdeveloped by Phonak, the world’s leading hearinghealthcare company.1. Welcome
5Please read this User Guide thoroughly to benet fromall the possibilities your Roger Pen oers.If you have any questions, please consult your hearingcare professional or local Phonak support center.Phonak – life is on www.phonak.com
14 When the docking station is plugged into the headset socket of your TV, you can adjust the volume via your TV’s remote control. Some TVs will switch o their loudspeakers when you plug the jack into the headset socket – meaning the TV will not be audible for other people. In such a case use the Cinch / RCA or SCART output socket as described above. The Roger Pen docking station can also be connected to any other audio device such as an MP3 player, PC or HiFi system using the audio cable. 3. Getting started
33Incoming callsTo receive a call, Roger Pen’s Bluetooth needs to be enabled and it must be paired to your phone . Make sure your hearing aids are set to the right program to receive the signal from your Roger receivers. When a call is received on your phone, Roger Pen’s indicator light will turn solid blue and you will hear the ringtone signal through your hearing aids.Incoming phone calls will also sound in your hearing aids even if Roger Pen is switched o. Roger Pen’s microphones are muted when your phone rings.
35Rejecting a callIf you prefer not to answer an incoming call, press the Decline button. Using your phone to reject the call will have the same eect.Making phone callsMake sure Roger Pen and your phone are connected via Bluetooth as described in ‘Setting up Bluetooth’ (Page 53). Use your phone keypad to enter the number and press the phone’s call button. You will hear the ringing tone in your hearing aids shortly afterwards.Ending a callTo end a phone call via your Roger Pen, press its Decline button. The call will terminate. You can also end a call via your phone instead of your Roger Pen.
36Advanced phone optionsThe following functions can only be used if your phone supports them. Please consult your phone’s User Guide if unsure. Redial last numberBriey the Accept button twice to redial the last number dialled. Voice diallingPress the Accept button once to activate voice dialling, then simply say the name of the person you want to call. Wait until you hear the prompt or start tone before speaking the person’s name. When you have connected two phones to your Roger Pen at the same time (MultiPoint) only the last paired phone can be used for voice dialling. You can also use this function to control your phone with your voice.4. Using Roger Pen
37Transferring a callHolding the Accept button for two seconds transfers the call back to your phone. This allows you to hand your phone to another person. You will no longer hear the call in your hearing aids. Holding the Accept button for another two seconds will transfer the call back to your Roger Pen.Disabling BluetoothIf you are not using Roger Pen’s Bluetooth function, we recommend deactivating Bluetooth to save power. Switch on Roger Pen and then press the Decline button for two seconds to deactivate Bluetooth.To re-activate Bluetooth, switch on Roger Pen and press the Accept button for two seconds. Your Roger Pen should connect automatically with your phone. To check whether Bluetooth is enabled, switch on your Roger Pen and press Accept . The indicator light will turn blue for two seconds if Bluetooth is enabled.
38
44 Once you have connected another microphone with your Roger Pen, it can only be used together with Roger Pen. The other microphone will blink red if it does not nd your Roger Pen. If you want to disconnect it from your primary Roger Pen, use the NewNet function (see ‘Special Functions’ on page 41). It’s possible to add up to 10 other Roger microphones to your Roger Pen. If you want to connect another Roger Pen to yours, you must rst disable the second Roger Pen’s Bluetooth before it can be connected.6. Adding additional microphones
47 Only one speaker can be heard at a time. When two people speak at the same time, the person who talked rst will be heard. When they stop talking, the other speaker will be heard. The speaker using Roger Pen should never move more than 10 m / 30 feet away from the group as this may disable the other Roger microphones. If the Roger Pen is turned o or moves out of range, the secondary Roger microphones will start blinking red and will stop transmitting.
497.1 What is Bluetooth? Bluetooth provides a way for devices like cellular or cordless phones, laptops and personal computers to communicate wirelessly.Your Roger Pen supports Bluetooth allowing you to receive phone calls directly in your hearing aids. For further information about Bluetooth, visit www.bluetooth.orgWhat Bluetooth devices can I use with my Roger Pen?First, check whether the device you wish to use is Bluetooth-enabled. Look for the Bluetooth symbol on the device or in its User Guide.Second, the possible applications of a Bluetooth- enabled device are dened by ‘proles’. The device you wish to use with your Roger Pen must support either the ‘Head Set’ or ‘Hands Free’ prole (HSP / HFP).7. Introducing Bluetooth
507. Introducing Bluetooth Bluetooth device compatibilityIf a problem occurs with the connection between your Bluetooth device and Roger Pen, or if you are unsure about your device’s Bluetooth capabilities, please consult your device’s User Guide or ask its dealer.Bluetooth operating rangeYour Roger Pen supports Bluetooth Class 2 operation up to a range of 3 meters (10 ft).Line-of-sight between your Roger Pen and your mobile phone is not required. However, the following factors may negatively affect the range achieved: SInterference with other devices in the environment may reduce the operating range. SThe Bluetooth device with which you are connecting may only support a more limited range.If your Bluetooth device moves out of range of yourRoger Pen and has an active audio connection, thisconnection will start to be intermittently lost, and will finally be terminated.
51If the device then moves back within range of yourRoger Pen, it may or may not resume streaming to your hearing aids. If it does not resume, switch off Roger Pen and switch it on again.7.2 Using a Bluetooth device: pairing and connecting To enable communication two simple procedures must be completed:1. Pairing: The pairing procedure allows you to control which Bluetooth devices are permitted to communicate with each other. It needs to be completed for each device you wish to use with your Roger Pen.2. Connecting: Once a device is allowed to communicate with Roger Pen (‘paired’) the connection procedure makes sure the devices can exchange audio signals. The paired devices will then connect every time they are switched on and within reach of each other.This connection is indicated on your phone by the appearance of the Bluetooth symbol.
52Most Bluetooth devices perform the connection procedure automatically after pairing.On the following pages the pairing and the connecting procedures are described.7. Introducing Bluetooth
537.3 Setting up Bluetooth This section describes the pairing and connectionprocedure for Bluetooth devices.Pairing a Bluetooth-enabled phone It is only necessary to perform the pairing procedure once with each Bluetooth device. The pairing procedure is controlled by your phone. Dierent phones have dierent menu structures. You should therefore refer to your phone’s User Guide or dealer if you cannot complete the pairing procedure with the generic steps described here. A maximum of 8 devices can be paired with one Roger Pen. A new pairing will replace the oldest used device. Roger Pen can support (connect to) two phones at the same time, but only one call at a time is possible.
557. Your phone should present a list of the Bluetooth devices it has detected. Select Roger Pen from this list.8. Your phone may then ask you to enter a passcode. If so, enter ‘0000’ (four zeros). Some phones may ask which Bluetooth service you want to enable. Select ‘Headset’.9. Your Roger Pen should now be paired to your phone and the indicator light will stop blinking.Connecting to a phoneOnce your phone and Roger Pen are paired (see ‘Pairing a Bluetooth-enabled phone’), the phone needs to beconnected to your Roger Pen before it can send its audio signals. This connection function should also appear in your phone’s Bluetooth menu.1. Ensure that the Roger Pen is turned on and it’s Bluetooth feature enabled.2. Locate the Bluetooth section of your phone’s settings menu and select ‘List of paired devices’.
563. Locate and highlight your Roger Pen and select ‘Connect’.4. Conrmation of successful connection is indicated on your phone by the appearance of a headset symbol. The connection between your Roger Pen and your phone will be maintained as long as the two devices remain on and within range of each other. If either device is switched o or moves out of range, you may need to re-connect devices. Some phones may connect automatically after pairing. We recommend selecting ‘yes’ when prompted to allow this automatic connection.7. Introducing Bluetooth
58Most probable cause(s) I cannot switch Roger Pen onJ The battery is emptyI cannot understand the speakerJ The microphone is not positioned correctlyJ The microphone openings are covered by ngers or clothing I cannot hear the speaker’s voice even though Roger Pen is switched onJ The microphone has been mutedJ Your hearing aids are has not set to the correct programJ Your Roger receivers are not connected to Roger Pen8. TroubleshootingSolution(s)J Charge Roger Pen for at least two hoursJ Move Roger Pen closer to the speaker’s mouth J Make sure Roger Pen is pointing towards the speaker’s mouthJ Make sure the microphone openings are not covered by ngers, clothing or dirtJ Check the indicator light – if it is violet, briey press the on / o button to activate the microphonesJ Check that your hearing aids are set to the correct program (Roger / FM / DAI / EXT)J Hold Roger Pen close to each Roger receiver in turn and press the Connect button
59J In case of multiple microphones, the primary microphone may not be switched on or may be out of rangeI keep losing the audio signalJ Distance between Roger Pen and Roger receiver is too largeJ There are obstacles between you and Roger PenThe volume of my multimedia device is too lowJ Incorrect volume settingsI cannot hear my multimedia deviceJ The audio source is muted J Roger Pen is using the micro-USB audio cable but is not switched onRoger Pen’s light is blinking red (single ash)J The primary microphone that your Roger Pen is connected to is no longer available J Check the indicator light - if it is blinking red, switch on the primary microphone and check that it is within rangeJ Go closer to your Roger PenJ Make sure you can see the Roger Pen (line of sight)J Increase volume of your audio sourceJ Unmute the audio sourceJ Switch on Roger Pen to listen to the audio source via the micro-USB audio cableJ Create a NewNet (press the Connect button for 7 seconds) to make your Roger Pen a standalone transmitter again Most probable cause(s) Solution(s)
60Roger Pen’s light is blinking red (double ash) J It’s battery charge is lowRoger Pen has stopped workingJ Software issueDuring Bluetooth pairing, the phone asks for a pass codeJ This code is required to pair your Roger Pen with your phoneI keep losing the signal during a Bluetooth phone callJ The Bluetooth device is either out of range or worn in a back pocket (body shielding)The volume of the mobile phone is not comfortable (too low or too high)JThe volume is not correctly set on the mobile phoneThe caller can hear me but I cannot hear the callerJ The call was transferred to the phoneJ Charger Roger Pen as soon as possibleJ Reboot Roger Pen by simultaneously pressing the on / o, microphone, accept and decline button J Roger Pen pairing code is ‘0000’ (four zeros)J Move back within range and keep Bluetooth devices in front of youJ Adjust the volume on the mobile phoneJ Make sure the call is transferred back to your Roger Pen by pressing the accept button for 2 seconds Most probable cause(s) Solution(s)8. Troubleshooting
61Roger Pen is no longer recognized by the phone to which is was previously pairedJ The devices are too far away from each otherJ Roger Pen has stopped seeking for paired Bluetooth devices to save powerJ Roger Pen can be paired to a maximum of 8 dierent Bluetooth devices. If its internal memory is full, new pairings may overwrite previous pairings. These devices are unpairedI accepted a call on my phone (instead of via Roger Pen) but cannot hear it in my hearing aidsJSome phones unfortunately do not support this functionMy phone is ringing but I cannot accept the call on my Roger PenJ The phone’s Bluetooth is disabled J Roger Pen’s Bluetooth is disabledJ Bring devices within 3 meter / 10 feetJ Switch Roger Pen o and on again J Repeat the pairingJ Always accept calls by pressing the Accept button on the Roger PenJ Ensure Bluetooth is enabled (see your phone’s User Guide J Ensure Bluetooth is enabled by pressing the Accept button for 2 secondsMost probable cause(s) Solution(s)
62J Roger Pen is not connected to your phoneJ Roger Pen is not paired with your phoneJ The distance between Roger Pen and your phone is too greatJ 1. Disable your phone’s Bluetooth and then turn it on again 2. Restart Roger Pen by switching it o and on again 3. Ensure Roger Pen’s Bluetooth is enabled by pressing the Accept button for 2 seconds 4. Connect Roger Pen to your phone by choosing it in the phone’s ‘Active device’ menu 5. Ensure your phone and Roger Pen are within rangeJ Follow the pairing process in this User GuideJ Do not exceed the maximum distance and keep Bluetooth devices in front of youMost probable cause(s) Solution(s)8. Troubleshooting
63My phone is ringing but I cannot hear its ringing tone even though Pen’s light has turned solid blueJ Phone is set to vibrate onlyJ Your Roger receiver is not connected or switched on J Your hearing aid is not set to the right programThe person on the phone is having diculty hearing me JRoger Pen’s microphone openings may be coveredJ Roger Pen is not being worn correctlyJ Roger Pen might be rubbing against clothingJ The volume of the caller’s phone is set to low JEnable your phone’s ring toneJ Ensure your Roger receiver is switched on and connectedJ Set your hearing aids to the correct Roger / FM / DAI / EXT / AUX programJ Make sure these openings are not covered by your ngers, clothing or dirtJ Roger Pen should point straight towards your mouth J Try to move less when speakingJ Ask your caller to increase their phone’s volumeMost probable cause(s) Solution(s)
659.2 Hazard warnings Keep this device out of reach of children aged under 3 years. Opening the device might damage it. If problems occur that cannot be resolved by following the guidelines in the Troubleshooting section of this User Guide, consult your hearing care professional. Your device should only be repaired by an authorized service center. Changes or modications to this device that were not explicitly approved by Phonak are not permitted. Please dispose of electrical components in accordance with your local regulations. Do not use your device in areas where electronic equipment is prohibited. If in doubt, please ask the person in charge. Device should not be used on aircrafts unless specically permitted by ight personnel.
66 External devices should only be connected if they have been tested in accordance with corresponding IECXXXXX standards. Only use accessories that are approved by Phonak AG. Using your device’s cables in any way contradictory to their intended purpose (e. g., wearing the USB cable around the neck) can cause injury. When operating machinery, ensure that no parts of your device can get caught in the machine. Do not charge device while it is on your body. Caution: electric shock. Do not insert plug alone into electrical outlets. 9. Important information
679.3 Product safety information Protect the device from excessive shock and vibration. Do not expose your device to temperatures and humidity outside of the recommended conditions stated in this User Guide. Never use a microwave or other heating devices to dry the device. Clean the device using a damp cloth. Never use household cleaning products (washing powder, soap, etc.) or alcohol to clean the device. Only recharge your device using chargers supplied by Phonak or by stabilized chargers providing 5VDC and ≥500 mA. Do not connect an USB or audio cable to your device that exceeds 3 meters (9 ft) in length. When the device is not in use, turn it OFF and store it safely.
68 Protect the device from excessive moisture (bathing, swimming), heat (radiator, car dashboard), and direct contact with skin when sweating (workout, tness, sport). X-ray radiation, CT or MRI scans may destroy or adversely aect the correct functioning of the device. Do not use excessive force when connecting your device to its dierent cables. Protect all openings (microphones, audio input and charger) from dirt and debris. If the device has been dropped or damaged, if it overheats during charging, has a damaged cord or plug, or has been dropped into liquid, stop using your device and contact your hearing care professional. The device has a built-in rechargeable battery. This battery can be charged and discharged hundreds of times but may eventually wear out. The battery may then only be replaced by authorized personnel.9. Important information
699.4 Other important information SPersons with pacemakers or other medical devices should ALWAYS consult their physician or the manufacturer of their device BEFORE using the device.The use of the device with a pacemaker or other medical devices should ALWAYS be in accordance with the safety recommendations of the physician responsible for your pacemaker or the pacemaker manufacturer. SDevice collects and stores internal technical data. This data may be read by a hearing care professional in order to check the device, as well as to help you use your device correctly. SThe digital signal sent from the device to a connected receiver cannot be overheard by other devices which are not in the microphone’s network.
7010. Service and warranty 10.1 Local warrantyPlease ask the hearing care professional, where you purchased your device, about the terms of the local warranty.10.2 International warrantyPhonak oers a one year limited international warranty, valid as of the date of purchase. This limited warranty covers manufacturing and material defects. The warranty is valid only if proof of purchase is shown.
7110.3 Warranty limitationThis warranty does not cover damage from improper handling or care, exposure to chemicals, immersion in water or undue stress. Damage caused by third partiesor non-authorized service centers renders the warranty null and void. This warranty does not cover any services performed by a hearing care professional in his/heroce.Serial number: Date of purchase: Authorized hearingcare professional(stamp / signature):
74The symbol with the crossed-out garbage bin is to make you aware that this device may not be thrown away as normal household waste. Please dispose of old or unused device, at waste disposal sites intended for electronic waste, or give your device to your hearing care professional for disposal. Proper disposal protects the environment and health. This product has an embedded, non-replaceable battery. Do not attempt to open the product or remove the battery as this may cause injury an damage the product. Please contact the local recycling facility for removal of the battery.11. Information and explanation of symbols
75The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Phonak is under license. Other trademarks and trade names are those of their respective owners.
Important Safety InformationDeclaration of ConformityService and WarrantyInformations de sécurité importantesDéclaration de conformitéService et garantieDevices, appareils: Roger PenRoger Clip-On MicThe information contained herein is subject to change without notice.Les informations ci-dessous peuvent faire l’objet de modifications sans notification préalable.www.phonak.com
2 English1 Important Safety Information Please read the information on the following pages before using your Phonak device. This symbol on the product or its packaging means that it should not be disposed of with your other household waste. It is your responsibility to dispose of your waste equipment separately from the municipal waste stream. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 1.1 Hazard warnings Keep this device out of reach of children aged under 3 years. Opening the device might damage it. If problems occur that cannot be resolved by following the guidelines in the Troubles hooting section of this User Guide, consult your hearing care professional. Your device should only be repaired by an authorized service center. Changes or modifications to this device that were not explicitly approved by Phonak are not permitted. Please dispose of electrical components in accordance with your local regulations. Do not use your device in areas where electronic equipment is prohibited. If in doubt, please ask the person in charge. Device should not be used on aircrafts unless specifically permitted by flight personnel. External devices should only be connected if they have been tested in accor-dance with corresponding IECXXXXX standards. Only use accessories that are approved by Phonak AG.
3 Using your device’s cables in any way contradictory to their intended purpose (e. g., wearing the USB cable around the neck) can cause injury. When operating machinery, ensure that no parts of your device can get caught in the machine. Do not charge device while it is on your body. Caution: electric shock. Do not insert plug alone into electrical outlets.1.2 Product safety informationi Protect the device from excessive shock and vibration.i Do not expose your device to temperatures and humidity outside of the recommended conditions stated in this User Guide. i Never use a microwave or other heating devices to dry the device.i Clean the device using a damp cloth. Never use household cleaning products (washing powder, soap, etc.) or alcohol to clean the device.i Only recharge your device using chargers supplied by Phonak or by stabilized chargers providing 5VDC and ≥500 mA.i Do not connect an USB or audio cable to your device that exceeds 3 meters (9ft) in length.i When the device is not in use, turn it OFF and store it safely.i Protect the device from excessive moisture (bathing, swimming), heat (radi-ator, car dashboard), and direct contact with skin when sweating (workout, fitness, sport).i X-ray radiation, CT or MRI scans may destroy or adversely aect the correct functioning of the device.i Do not use excessive force when connecting your device to its dierent cables.i Protect all openings (microphones, audio input and charger) from dirt and debris.
4 i If the device has been dropped or damaged, if it overheats during charging, has a damaged cord or plug, or has been dropped into liquid, stop using your device and contact your hearing care professional. i The device has a built-in rechargeable battery. This battery can be charged and discharged hundreds of times but may eventually wear out. The battery may then only be replaced by authorized personnel.1.3 Other important information Persons with pacemakers or other medical devices should ALWAYS consult their physician or the manufacturer of their device BEFORE using the device. The use of the device with a pacemaker or other medical devices should ALWAYS be in accordance with the safety recommendations of the physician responsible for your pacemaker or the pacemaker manufacturer. Device collects and stores internal technical data. This data may be read by a hearing care professional in order to check the device, as well as to help you use your device correctly. The digital signal sent from the device to a connected receiver cannot be overheard by other devices which are not in the microphone’s network.2 Declaration of ConformityIn body worn operation, the devices have been found in compliance with the requirements of EN 62209-2, FCC rule paragraph 2.1093, the ANSI/IEEE C95.1:1999, the NCRP Report Number 86 for uncontrolled environment, accord-ing to the Health Canada’s Safety Code 6 and the Industry Canada Radio Stan-dards Specification RSS-102 for General Population/Uncontrolled exposure.Hereby, Phonak Communications AG, Länggasse 17, CH-3280 Murten, declares that these Phonak products are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. To obtain a copy of the Declaration of conformity, please contact the manufacturer or the local Phonak representative whose address can be taken from the list on www.phonak.com (worldwide locations).
5This device complies with Part 15 of the FCC Rules and with RSS210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-sonable protection against harmful interference in a residential installation. The device generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the device does cause harmful interference to radio or television reception, which can be determined by turning the device o and on, the user is encouraged to try to correct the interference by one of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the device and receiver.– Connect the device into an outlet on a circuit dierent from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly ap proved by the party responsible for compliance could void the user’s authority to operate the device.
6 3 Service and WarrantyLocal warrantyPlease ask the hearing care professional, where you purchased your device, about the terms of the local warranty.International warrantyPhonak oers a one year limited international warranty, valid as of the date of purchase. This limited warranty covers manufacturing and material defects. The warranty is valid only if proof of purchase is shown.Warranty limitationThis warranty does not cover damage from improper handling or care, exposure to chemicals, immersion in water or undue stress. Damage caused by third parties or non-authorized service centers renders the warranty null and void. This warranty does not cover any services performed by a hearing care professional in his/her oce.Serial number: Purchase date: Authorized hearingcare professional(stamp/signature):
7Français 1 Information de sécurité importante Veuillez lire les informations sur les pages suivantes avant d’utiliser votre appareil Phonak. Le symbole apposé sur le présent produit ou son emballage signifie qu’il ne doit pas être jeté avec les autres ordures ménagères. Il vous incombe de jeter votre ancien matériel séparément c’est-à dire hors système de collecte des ordures ménagères municipal. En éliminant votre ancien matériel en bonne et due forme, vous préviendrez tout risque d’ impact néfaste sur l’environnement et la santé publique. 1.1 Avertissements de danger Maintenez cet appareil hors de portée des enfants de moins de 3 ans. Ouvrir l’appareil peut l’endommager. Si des problèmes surviennent et ne peuvent pas être résolus en suivant les directives de la section Dépannage de ce Mode d’emploi (le cas échéant), consultez votre audioprothésiste. Votre appareil doit uniquement être réparé par un centre de service autorisé. Les changements ou modifications de cet appareil qui n’ont pas été approuvés explicitement par Phonak ne sont pas autorisés. Éliminez les composants électriques selon les dispositions locales en vigueur. N’utilisez pas votre appareil dans les zones où les équipements électroniques sont interdits. En cas de doute, veuillez consulter la personne responsable. L’appareil ne doit pas être utilisé dans les avions, sauf si le personnel de vol l’autorise spécifiquement. Les appareils externes ne doivent être connectés que s’ils ont été testés conformes aux normes CEIXXXX correspondantes. N’utilisez que des accessoires approuvés par Phonak AG.
8 Utiliser les câbles de votre appareil de manière contraire à leur usage prévu (par ex. porter le câble USB autour du cou) peut provoquer des blessures. Lors de l’utilisation de machines, assurez-vous qu’aucune partie de votre appareil ne puisse se coincer dans la machine. Ne chargez pas l’appareil lorsqu’il est sur votre corps. Avertissement : électrocution. N’insérez pas la fiche seule dans des prises élec-triques.1.2 Informations sur la sécurité du produiti Protégez l’appareil des chocs et vibrations excessifs.i N’exposez pas votre appareil à des températures et une humidité hors des con-ditions recommandées dans le présent Mode d’emploi. i N’utilisez jamais de four à micro-ondes ou d’autres appareils de chauage pour sécher l’appareil.i Nettoyez l’appareil avec un chion humide. N’utilisez jamais de produits de nettoyage domestiques (lessive en poudre, savon, etc.) ou d’alcool pour netto-yer l’appareil.i Ne rechargez votre appareil qu’avec les chargeurs fournis par Phonak ou des chargeurs stabilisés fournissant 5 VCC et ≥ 500 mA.i Ne connectez pas de câble USB ou audio de plus de 3 mètres de long à votre appareil.i Quand l’appareil n’est pas utilisé, éteignez-le et conservez-le en lieu sûr.i Protégez l’appareil contre l’humidité excessive (bain, natation), la chaleur (radiateur, tableau de bord de voiture) et le contact direct avec la peau lorsque vous transpirez (musculation, exercice, sport).i Les radiographies, tomodensitométries ou IRM peuvent détruire ou avoir un impact négatif sur le bon fonctionnement de l’appareil.
9i N’exercez pas de force excessive lors de la connexion de votre appareil à ses diérents câbles.i Protégez toutes les ouvertures (microphones, entrée audio et chargeur) de la saleté et des impuretés.i Si l’appareil est tombé ou a été endommagé, s’il surchaue pendant le char-gement, si son cordon ou sa fiche est endommagé ou s’il est tombé dans un liquide, arrêtez de l’utiliser et contactez votre audioprothésiste. i L’appareil a une pile rechargeable intégrée. Celle-ci peut être chargée et déchargée des centaines de fois mais peut finir par s’user. La pile ne peut être remplacée que par un personnel autorisé.1.3 Autres informations importantes Les personnes portant un stimulateur cardiaque ou d’autres appareils médicaux doivent TOUJOURS consulter leur médecin ou le fabricant de leur appareil AVANT d’utiliser l’appareil. L’utilisation de l’appareil avec un stimulateur cardiaque ou d’autres appareils médicaux doit TOUJOURS être conforme aux recommandations de sécurité du médecin responsable de votre stimulateur cardiaque ou du fabri-cant du stimulateur cardiaque. L’appareil recueille et stocke les données techniques internes. Ces données peu-vent être lues par un audioprothésiste afin de contrôler l’appareil et de vous aider à l’utiliser correctement. Le signal numérique envoyé par l’émetteur de l’appareil au récepteur connecté ne peut pas être entendu par d’autres appareils non intégrés au réseau de l’émetteur.2 Déclaration de ConformitéPour l’utilisation sur le corps, cet appareil a été jugé conforme aux exigences d’EN 62209-2, Réglementation de la FCC paragraphe 2.1093, l’ANSI/IEEE C95.1:1999, le rapport numéro 86 du NCRP pour l’environnement non contrôlé, conformément au code de sécurité 6 de Santé Canada et la norme radio CNR-102 d’Industrie Canada pour l’exposition non contrôlée/de la population en général.
10 Par la présente, Phonak Communications AG, Länggasse 17, CH-3280 Murten, décla-re que le produit Phonak est conforme aux exigences principales et autres dispositions pertinentes de la directive 1999/5/CE. Pour obtenir une copie de la Déclaration de conformité, veuillez contacter le fabricant ou le représentant Phonak local dont l’ad-resse figure sur la liste du site www.phonak.com (sites à travers le monde).Cet appareil est conforme aux sections 15 des réglements de la FCC et à CNR-210 d’Industrie Canada. Le fonctionnement aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d’interférences gênantes et (2) l’utilisateur de cet appareil doit accepter les interférences reçues, y compris les interférences pouvant provoquer un fonctionnement non désiré. Cet équipement a été testé et jugé en conformité avec les limites aérentes à un appareil numérique de classe B, en vertu de la section 15 des règlements de la FCC. Ces normes sont conçues pour assurer une protection raisonnable contre les interférences nuisibles dans un en-vironnement résidentiel. Cet appareil génère, utilise et peut émettre de l’énergie radioélectrique et, s’il n’est pas installé ou utilisé selon les directives, peut causer des interférences nuisibles aux communications radio. Cependant, il n’existe aucu-ne garantie que des interférences ne se produiront pas dans une installation parti-culière. Si cet appareil est la source d’interférences nuisibles pour la réception des ondes de radio ou de télévision, ce qui peut être déterminé en mettant l’appareil hors tension, puis sous tension, il est recommandé de tenter d’éliminer ces interférences en appliquant l’une ou plusieurs des mesures suivantes :– Réorienter ou déplacer l’antenne réceptrice.– Éloigner l’appareil du récepteur.– Brancher l’appareil dans une prise d’un circuit diérent de celui qui alimente le récepteur.– Consulter le détaillant ou un technicien radio ou télévision qualifié pour obtenir de l’aide.Avertissement de la FCC : tout changement ou toute modification non ex-pressément approuvés par la partie responsable de la conformité pourrait entraîner l’annulation des droits d’utilisation de cet appareil.
113 Service et garantieGarantie localeVeuillez consulter l’audioprothésiste à l’endroit où vous avez acheté votre appareil au sujet des conditions de la garantie locale.Garantie internationalePhonak propose une garantie internationale limitée d’un an, valide à compter de la date d’achat. Cette garantie limitée couvre tous les défauts de fabrication et maté-riels. La garantie est uniquement valide sur présentation d’une preuve d’achat.La garantie internationale n’aliène aucun des droits légaux dont vous pouvez bénéficier selon votre législation nationale régissant la vente de produits de consommation.Limitation de garantieCette garantie ne couvre pas les dommages dus à une manipulation ou un entretien inadaptés, l’exposition à des produits chimiques, l’immersion dans l’eau ou une sollicitation excessive. Les dommages causés par des tiers ou des centres de service non autorisés annulent la garantie. Cette garantie ne couvre pas les services eectués par un audioprothésiste dans son bureau. Numéro de série: Date d’achat :Audioprothésiste autorisé(tampon/signature) :
029-3180 / V1.00 / 2013-06 / visu’l Printed in Vietnam © Phonak AG All rights reserved

Navigation menu