Sonova USA MYLINKD Auditory Assistance Device User Manual User Guide Roger MyLink 92x125 GB indd

Phonak Inc Auditory Assistance Device User Guide Roger MyLink 92x125 GB indd

Contents

User Manual

www.phonak.com/rogerManufacturer:Phonak AGLaubisrütistrasse 28CH-8712 StäfaSwitzerlandEU Representative:Phonak GmbHD-70736 Fellbach-OeffingenGermany029-3166-02/V1.00/2013-02/A+W Printed in Switzerland © Phonak AG All rights reserved
User Guide
2 1. Welcome 5 2. Getting to know your Roger MyLink 6 2.1 Compatibility 7 2.2 Device description 7 2.3 Indicator light 9 3. Getting started 14 Step 1. Charge your Roger MyLink 14 Step 2. Detach the neckloop 16 Step 3. Hang Roger MyLink around the neck and reattach the loop 16 Step 4. Switch Roger MyLink on 17 Step 5. Choose how to wear Roger MyLink 17 Step 6. Turn on your Roger microphone 18 Step 7. Switch your hearing aid(s) to the T-Coil program 18 Step 8. Connect Roger MyLink to your Roger microphone 18 Step 9. Adjust Roger MyLink’s volume 20Contents
3 4. Using headphones 21 Step 1. Plug the headphones into Roger MyLink’s headphone socket 21 Step 2. Turn Roger MyLink on 21 Step 3. Put the headphones on 22 5. More detailed information 23 6. Troubleshooting 24 7. Important information 26 7.1 Hazard warnings 26 7.2 Product safety information 28 7.3 Other important information 31 7.4 International use 32 8. Service and warranty 33 9. Information and explanation of symbols 35
51. WelcomeCongratulations on choosing Roger MyLink from Phonak. Roger MyLink is an easy-to-use and affordable Roger receiver suitable for use with any hearing aid featuring a T-Coil (from Phonak or any other manufacturer). Roger MyLink is compatible with most Roger microphones from Phonak.Your Roger MyLink is a Swiss premium-quality product developed by Phonak, the world’s leading hearing healthcare company.Please read this User Guide thoroughly to benefit from all the possibilities your Roger MyLink offers.If you have any questions, please consult your hearing care professional or local Phonak support center.Phonak – life is on www.phonak.com
6Your hearing system consists of three main elements: Roger MyLink, your hearing aids and a Roger microphone, such as Roger inspiro.The Roger microphone transmits the speaker’s voice wirelessly to your hearing aids via the Roger MyLink. You only need to activate the T-Coil in your hearing aid(s) to hear the speaker’s voice loud and clear in your ear(s). Hearing aid Listener Speaker2. Getting to know your Roger MyLinkRoger MyLink Roger microphone such as Roger inspiro
72.1 CompatibilityYour hearing aids must feature a T-Coil to receive speech signals from Roger MyLink. Please ask your hearing care professional if you are unsure whether or not your hearing aids have a T-Coil. A compatible Roger microphone is also required to pick up the voice of the speaker. In this User Guide, Roger inspiro is used as an example. 2.2 Device descriptiona Fixed side of neckloopb Detachable side of neckloopc Green / orange status indicator a bc
8a Volume controlb On/offa Charging socketb Headphone socket (2.5 mm)2. Getting to know your Roger MyLink a ba b
9abcdef 2.3 Indicator light Green light Orange lighta Battery almost exhaustedb Battery completely exhaustedc Chargingd Charging completee Volume control: minimum /maximum positionf Volume control: middle position
102. Getting to know your Roger MyLink GeneralSwitching Roger MyLink on The green light is visible for 3 secondsBattery statusa) 60 seconds 3 orange flashes (and 3 beeps), repeated every 60 secondsb) 10 orange flashes (and 10 beeps)
11 MeaningRoger MyLink has been switched on and is ready for use.Battery is almost empty.Battery is completely exhausted. Roger MyLink can no longer be used without first being charged. Roger MyLink will automatically switch off after ten flashes.User actionSwitch on the Roger microphone and set the hearing aids to the T-Coil program. Charge Roger MyLink as soon as possible (within an hour).*Charge Roger MyLink immediately (within an hour). ** We recommend you charge Roger MyLink and your microphone at the same time.
12Chargingc) Green double-flashes every 5 seconds d) The green light is constantly visibleVolumee) One orange flash (and a double beep) f) One green flash (and a single beep)2. Getting to know your Roger MyLink
13MeaningRoger MyLink is connected to the charger and is being charged. Roger MyLink’s battery is fully charged.The volume control is set to either maximum or minimum position.The volume control is in the middle position.User actionWait until battery is charged. Charging a completely exhausted battery takes around two hours. The battery will be 80% charged within one hour.Unplug the charger. Thegreen light will disappear, meaning Roger MyLink is ready for use.
143. Getting started Step 1. Charge your Roger MyLinkFully charge Roger MyLink and your Roger microphone before using the system for the first time. An empty Roger MyLink battery is:J 80% charged after one hourJ 100% charged after two hours Plug the charging unit into an easily accessible power socket.! Only use original Phonak charging units.
15 Plug the connector from the charger into the Roger MyLink charging socket. J Once fully charged, Roger MyLink can be used for 10 or more hours.J Roger MyLink cannot be used when the charger is still attached.
163. Getting started Step 2. Detach the neckloop Step 3. Hang Roger MyLink around the neck and reattach the loop
17 Step 4. Switch Roger MyLink onStep 5. Choose how to wear Roger MyLink
183. Getting started Step 6. Turn on your Roger microphoneStep 7. Switch your hearing aids to the T-Coil programI It may be necessary to contact your hearing care professional to enable the T-Coil program in your hearing aids.Step 8. Connect Roger MyLink to your Roger microphoneHold Roger MyLink within 10 cm / 4 inches of your Roger microphone and press Connect on the Roger microphone.Connect0-10 cm / 0-4 inches
19 I Step 8 is only required the first time you use Roger MyLink. Roger MyLink will then remain connected with your microphone even after Roger MyLink has been rebooted. Ready!
20Step 9. Adjust Roger MyLink’s volumeVolume up Volume downShort button press: The volume will increase / decrease only slightly.Long button press: The volume will continue to increase / decreased until you stop pressing the button.Once you have chosen your preferred volume, Roger MyLink will automatically store this setting for next time.I If the wirelessly transmitted signal is not strong enough, increase the volume setting on Roger MyLink.3. Getting started
21People who do not wear hearing aids can use Roger MyLink with headphones. To benefit from maximum hearing comfort, we recommend using official Roger MyLink headphones. Step 1. Plug the headphones into Roger MyLink’s headphone socketStep 2. Turn Roger MyLink on4. Using headphones
224. Using headphones Step 3. Put the headphones onJ The neckloop is automatically switched off when the headphones are attached (to save battery power).J Use Roger MyLink’s volume control to increase or decrease the volume of the transmitted signal (see page 20).
23Operating range: Up to 20 meters / 66 feetBattery: Rechargeable Lithium-Polymer accumulatorPower supply: 7.5 VDC / 250 mAWireless: 2.4 GHz5. More detailed information
24The following is a summary of frequently asked questions about Roger MyLink and our answers to them.Most probable cause The green light is not visible when Roger MyLink is switched onJ Battery is completely exhaustedI cannot hear sound from the Roger microphoneJ One or all devices are switched offJ The T-Coil is not activatedJ Roger MyLink is not connected to your Roger microphone J The Roger microphone is mutedJ Roger MyLink is out of range of the Roger microphone6. TroubleshootingSolutionJ Charge Roger MyLink J Make sure all devices (Roger MyLink, Roger microphone, hearing aids) are turned on and fully operational J Switch your hearing aids to the T-Coil programJ Connect Roger MyLink with your Roger microphone by pressing ‘Connect’ on your microphone. Note that Roger MyLink needs to be within 10cm/4 inches of your Roger microphoneJUnmute the Roger microphone (refer to its User Guide)JMove closer to the Roger microphone to move within its operating range
25 The signal is interrupted during audio streamingJ Roger MyLink is too far away from the Roger microphone J Roger MyLink is shielded by an obstacle (e.g. human body) The sound of Roger MyLink is badJ Electromagnetic fields from other equipment may create an audible hum through the T-Coil of your hearing aidsJRoger microphone is not worn correctly The volume is too loud or too softJ Volume is not correctly setJ Move closer to the Roger microphone to move within its operating rangeJAdjust the device orientation and make sure you are in line of sight to the Roger microphone JMove away from electronic equipment until the hum stopsJMake sure the Roger microphone is worn as indicated in its User Guide JAdjust the volume on Roger MyLink until it suits your preference Most probable cause Solution
26R Please read the information on the following pages before using your Phonak Roger MyLink.7.1 Hazard warnings! Persons with pacemakers or other medical devices should ALWAYS consult their physician, the manufacturer of their device BEFORE using the Roger MyLink. The use of Roger MyLink with a pacemaker or other medical devices should ALWAYS be in accordance with the safety recommendations of the physician responsible for your pacemaker or the pacemaker manufacturer. ! Keep this device out of reach of children under 3 years of age. ! Switch Roger MyLink off when you enter a room with an activated loop system. ! Do not use water or fluids for cleaning. It is recommended to use Phonak CleanLine products. Your hearing care professional will be glad to advise you.7. Important information
27! Opening the Roger MyLink might damage it. If problems occur that cannot be resolved by following the guidelines in the Troubleshooting section of this User Guide, consult your hearing care professional.! Your Roger MyLink should only be repaired by an authorized service center. Changes or modifications to this device that were not explicitly approved by Phonak are not permitted.! Please dispose of electrical components in accordance with your local regulations.! Do not use your Roger MyLink in areas where electronic equipment is prohibited. If in doubt, please ask the person in charge.! Roger MyLink should not be used on aircrafts unless specifically permitted by flight personnel.! External devices should only be connected if they have been tested in accordance with corresponding IECXXXXX standards.
287. Important information ! Only use accessories that are approved by Phonak AG.! When operating machinery, ensure that no parts of your Roger MyLink can get caught in the machine.! Do not charge Roger MyLink while it is on your body. ! Caution: electric shock. Do not insert plug alone into electrical outlets.7.2 Product safety informationI Protect the Roger MyLink from excessive moisture (bathing, swimming), heat (radiator, car dashboard), and direct contact with skin when sweating (workout, fitness, sport).I X-ray radiation, CT or MRI scans may destroy or adversely affect the correct functioning of the Roger MyLink.
29I Protect the Roger MyLink from excessive shock and vibration.I Do not expose your Roger MyLink to temperatures and humidity outside of the recommended conditions stated in this User Guide. I Do not use excessive force when connecting your Roger MyLink to its different cables.I Protect all openings (microphones, audio input and charger) from dirt and debris.I If the Roger MyLink has been dropped or damaged, if it overheats during charging, has a damaged cord or plug, or has been dropped into liquid, stop using your Roger MyLink and contact your hearing care professional. I Never use a microwave or other heating devices to dry the Roger MyLink.
307. Important information I Clean the Roger MyLink using a damp cloth. Never use household cleaning products (washing powder, soap, etc.) or alcohol to clean the Roger MyLink.I Only recharge your Roger MyLink using chargers supplied by Phonak or by stabilized chargers providing 5VDC and ≥500 mA.I When the Roger MyLink is not in use, turn it off and store it safely.I The Roger MyLink has a built-in rechargeable battery. This battery can be charged and discharged hundreds of times but may eventually wear out. The battery may then only be replaced by authorized personnel.
31 7.3 Other important informationJ High-powered electronic equipment, larger electronic installations and metallic structures may impair and significantly reduce the Roger MyLink’s operating range.J Roger MyLink collects and stores internal technical data. This data may be read by a hearing care professional in order to check the device, as well as to help you use your device correctly. J The digital signal sent from the Roger microphone to a connected receiver cannot be overheard by other devices which are not in the transmitter’s network.J Be aware that wireless transmission from transmitter to receiver may be interrupted due to interference or moving out of range, and that words which are then spoken by the transmitter wearer may not be heard by the receiver wearer.
327. Important information J Avoid exposing the receiver to hair spray or other cosmetic chemicals.J The sensitivity of the hearing aid microphone may be reduced by the use of your Roger MyLink and therefore environmental awareness may be reduced. 7.4 International useJ The Roger MyLink is operating in the 2.4GHz ISM Band, which is unlicensed and worldwide available.
338. Service and warranty8.1 Local warrantyPlease ask the hearing care professional, where youpurchased your Roger MyLink, about the terms of the local warranty.8.2 International warrantyPhonak offers a one year limited international warranty,valid as of the date of purchase. This limited warrantycovers manufacturing and material defects. The warrantyis valid only if proof of purchase is shown.The international warranty does not affect any legal rights that you might have under applicable national legislation governing sale of consumer goods.
34Authorized hearing care professional(stamp/signature):8.3 Warranty limitationThis warranty does not cover damage from improperhandling or care, exposure to chemicals, immersion in water or undue stress. Damage caused by third parties or non-authorized service centers renders the warranty null and void. This warranty does not cover any services performed by a hearing care professional in his/her office.Serial number: Date of purchase:8. Service and warranty
359. Information and explanation of symbolsWith the CE symbol, Phonak AGconfirms that this Phonak productmeets the requirements of theMedical Devices Directive 93/42/EECas well as the R&TTE Directive1999/5/EC on radio and telecommunications equipment.This symbol indicates that Roger MyLink products meet the requirements of a Type BF component containing EN 60601-1.This symbol indicates that it isimportant for the user to read andtake into account the relevantinformation in this user guide. R Cπ
36!This symbol indicates that it isimportant for the user to payattention to the relevant warningnotices in these user guides.Important information for handlingand product safety.Australian EMC and Radiocom-munications compliance label.This device is designed such thatit functions without problems orrestrictions if used as intended,unless otherwise noted in these userguides.0°C to +40° Celsius (+32° to +104° Fahrenheit) and relative humidityof <95% (non condensing).Operating conditions IE9. Information and explanation of symbols
37 During transport or storage, thetemperature should not exceed thelimit values of –20° to +60° Celsius (–4° to +140° Fahrenheit) and relative humidity of 90% for a long period of time. The air pressure between 500 hPa and 1100 hPa is appropriate. Transport and storage conditions
38T The symbol with the crossed-out garbage bin is to make you aware that this device may not be thrown away as normal household waste. Please dispose of old or unused device, at waste disposal sites intended for electronic waste, or give your device to your hearing care professional for disposal. Proper disposal protects the environment and health. This product has an embedded, non-replaceable battery. Do not attempt to open the product or remove the battery as this may cause injury and damage the product. Please contact the local recycling facility for removal of the battery.

Navigation menu