Solectek 36WAN1 SkyWay MAX User Manual Part 3

Solectek Corporation SkyWay MAX Users Manual Part 3

Users Manual Part 3

SkyWay-MAXOperator’s Guide21G. Diagnostic ToolsThe BSU contains a number of embedded network tools to assist with the debug and verication of network operation. These tools include:Ping yTraceRt yARP Table yBridge Table yUsage and syntax of these tools is similar to those of standard networking appliances. Access to these tools on the Manager Application is via Administration : Diagnostic Tools.
Operator’s Guide22SkyWay-MAXVII. Appendix A – System DefaultsA. Default ConfigurationBSULogin adminPassword adminIP Address 192.168.0.1Netmask 255.255.255.0Default Gateway 192.168.0.10FTP Address <blank>FTP User <blank>FTP Password <blank>RF Channel Plan Default.ccRF Power 36 dBmOptimal RSSI -70 dBmUplink Modulation AutoDownlink Modulation AutoBSID 00000B:xxxxxx, where x is last 3 octets of RF MAC SecurityX.509 Certicates yDisabledAccess Control List yDisabledEncryption yClearAdministrative Services NoneUser Services NoneName <blank>Location <blank>GPS Coordinates <blank>Antenna Bearing <blank>Antenna Beamwidth <blank>SSLogin adminPassword admin
SkyWay-MAXOperator’s Guide23SS (cont’d)IP Address 192.168.0.2Netmask 255.255.255.0Default Gateway 192.168.0.10FTP Address <blank>FTP User <blank>FTP Password <blank>BSID Verication DisabledBSID table <none>RF Channel Plan Default.cc SS Name <blank>SS Location <blank>GPS Coordinates <blank>
Operator’s Guide24SkyWay-MAXB. Default Channel Plan File (3.4 – 3.6 GHz operation)For coverage of the 3.4-3.6 GHz frequency range, the SkyWay MAX system uses a default channel plan which is a subset of the CEPT/ERC/REC 14-03E channel plan. Operators may use the default channel plan le, as-is, or may use it as template to create custom .cc les. These les can be uploaded to the same directory in the BSU and SS and activated in the system through the management system. Filename: default.ccPath: /etc/umac/cc.d#/etc/umac/cc.d/default.cc------------------------------## Contains default channel centers for 3.4-3.6 GHz operation## Valid Entries are:## name CHANNEL_PLAN_NAME# CHANNEL_PLAN_NAME is a string for name of the plan## abbrev ABBREVIATION# ABBREVIATION of plan name up to 4 symbols## channel FREQ BW# FREQ - channel frequency in kHz# BW - channel bandwidth in MHz#-------------------------------------------------------## This section is for common channel plan properties#name Defaultabbrev DBcyclic_prex 32#-------------------------------------------------------# Channels are listed below this line. ##----------- Freq ----- BW -----------------------------channel 3411750 3500channel 3418750 3500channel 3411750 3500channel 3418750 3500channel 3425750 3500channel 3432750 3500channel 3439750 3500channel 3461750 3500channel 3468750 3500channel 3475750 3500channel 3482750 3500channel 3489750 3500
SkyWay-MAXOperator’s Guide25channel 3501750 3500channel 3508750 3500channel 3515750 3500channel 3522750 3500channel 3529750 3500channel 3536750 3500channel 3543750 3500channel 3551750 3500channel 3558750 3500channel 3565750 3500channel 3572750 3500channel 3579750 3500channel 3586750 3500channel 3593750 3500# 7 MHz channelschannel 3420500 7000channel 3434500 7000channel 3463500 7000channel 3477500 7000channel 3491500 7000channel 3510500 7000channel 3524500 7000channel 3538500 7000channel 3553500 7000channel 3567500 7000channel 3581500 7000channel 3595500 7000#end
Operator’s Guide26SkyWay-MAXVIII. Appendix B Management SystemsA. Manager Application – Expanded Navigation Bar B. Telnet / Console Commands
SkyWay-MAXOperator’s Guide27IX. Appendix C Services - Advanced A. Available ClassifiersThe following Classier Types are supported on the SkyWay MAX system802.3 Source MAC Address Destination MAC Address Ethertype 802.1p/q VLAN ID VLAN Priority Range Ipv4 Protocol + Port Range Source Address, with bit mask Destination Address, with bit mask ToS Value, with bit mask B. QoS Scheduling ParametersAvailable Parameters, by Scheduling TypeScheduling Type Supported ParametersUGS Grant SizeGrant IntervalMaximum Sustained Trac RateMinimum Reserved Trac RateMaximum LatencyTrac PriorityrtPS Grant IntervalMaximum Sustained Trac RateMinimum Reserved Trac RateMaximum LatencyTrac PrioritynrtPS Maximum Sustained Trac RateMinimum Reserved Trac RateTrac PriorityBE Maximum Sustained Trac RateTrac Priority
Operator’s Guide28SkyWay-MAXParameter DefinitionsParameter Description Default Value1. Grant Size: The size of each UGS grant in bytes. --2. Grant Interval. The period between UGS grants, or rtPS polls, in mS 203. Max Sustained Trac Rate Upper limit, or ceiling, of trac rate, in bits/second A setting of zero means unlimited.04. Min Reserved Trac Rate Lower limit of trac rate reserved per Service, in bits/sec2505. Max Latency Upper latency limit per Service, in mS. Only applies when actual trac rate is < Min Reserved Rate (ie - the Service is not overloading the reservation. 12006.Trac Priority Denes priority when packet matches 0 (Administrative and Open IP Services)classication on multiple Services. 7 (User Services)Range is 0-7, with 7 as the highest priority.C. Recommended Service Class configurationsOpen IP1. Internet Data2. Voice3. IPTV4.

Navigation menu