Smart eye Digital Electronics 754GA IP Camera User Manual User guide

Shenzhen Smart-eye Digital Electronics Co.,Ltd IP Camera User guide

UserManual.wiki >

Smart eye Digital Electronics >

754GA User Manual

User guide

X Series User Guide November, 2015 V2.0 If the user manual doesn’t help you to solve the problem, please call our technology center for technical support. Statement Please read and understand this manual before attempting installation of the product.

用户手册 1. Installation Environment  Keep away from the places for high-temperature, heat source and direct sunlight;  Keep away from water and if wet, power off immediately.  Avoid using in the damp environment; the reference range for operation humidity is below 85%RH.  Avoid using in too hot or too cold environment, the reference range for operation temperature is -10℃~ +40℃  Please install it horizontally or wall mount, avoid strenuous vibration and do not place other items on top of the unit. 2. Transport and Handling  Please handle the item carefully.  Do not move the item between too hot and too cold areas.  Please disconnect the item from the mains before moving. Notice: 1. Do not fall down the camera or beat it strongly. 2. Do not touch the optical components for the image sensor, such as the lens, if necessary, please place a clean and moistened cloth with alcohol and wipe the dirt gently; When not in use, please place the dust cover onto the item to protect the image sensor. 3. Do not aim the camera directly into the sun or at other intense light sources that could affect the image quality, this will also shorten the service life for the image sensor. 4. Keep away from laser when it is working, otherwise the image sensor can be damaged. 5. If the equipment is not working properly, please contact the store or the service center, do not disassemble or modify the equipment in any way. 6. If the equipment is not working properly, please contact the store or the service center, do not disassemble or modify the equipment in any way. Notice

用户手册 Index 1 Product Introduction .................................................................................................................... 1 1.1. Product Overview ............................................................................................................ 1 1.2 .Product Exposition .............................................................................................................. 1 2 Device Connection....................................................................................................................... 3 2.1. Connection Diagram ....................................................................................................... 3 2.2. Wi-Fi Setting ..................................................................................................................... 3 2.2.1. Configuration via network cable connection ................................................. 3 2.2.2. WPS/QSS One key configure Wi-Fi ............................................................... 3 2.2.3. Mobile Phone Setting ......................................................................................... 4 3 View Video by Browser ............................................................................................................... 5 3.1. Select View Mode in web............................................................................................... 5 3.2. View Live Video................................................................................................................ 6 4 Query and Playback SD Record by Browser......................................................................... 8 4.1. Playback Video ................................................................................................................ 8 5 Device Configuration and Local Setting.................................................................................. 8 5.1. Device Configuration ...................................................................................................... 8 5.1.1. System ................................................................................................................... 8 5.1.1.1. Device Status ............................................................................................. 8 5.1.1.2. Time Setting ............................................................................................... 9 5.1.1.3. Pan&Tilt Setting ......................................................................................... 9 5.1.1.4. Others Setting .......................................................................................... 10 5.1.1.5. Multiple Settings ...................................................................................... 10 5.1.1.6. System Maintenance .............................................................................. 11 5.1.1.7. Device information .................................................................................. 12 5.1.2. Network ............................................................................................................... 12 5.1.2.1. IP Address Setting................................................................................... 12 5.1.2.2. Port Setting ............................................................................................... 12 5.1.2.3. Wi-Fi Setting ............................................................................................. 13 5.1.2.4. Port Forwarding ....................................................................................... 13 5.1.2.5. DDNS Setting ........................................................................................... 13 5.1.2.6. RTSP Setting............................................................................................ 14 5.1.2.7. Onvif Setting .......................................................................................... 14 5.1.2.8. FTP Setting ............................................................................................... 15 5.1.2.9. SMTP（E-mail）Setting ........................................................................ 15 5.1.3. Audio and Video ................................................................................................ 16 5.1.3.1. Video Encoding Setting ......................................................................... 16 5.1.3.2. Volume Setting ......................................................................................... 16 5.1.3.3. Image Setting ........................................................................................... 16 5.1.3.4. OSD Setting.............................................................................................. 17 5.1.3.5. Night vision Settings ............................................................................... 17 5.1.4. Security................................................................................................................ 18 Access to User management, you can add or edit the user as Figure31. ... 18 5.1.5. Alarm .................................................................................................................... 20

用户手册 5.1.5.1. IO Detect ................................................................................................... 20 5.1.5.2. Motion Detection ..................................................................................... 20 5.1.5.3. Audio Detection ....................................................................................... 21 5.1.5.4. Linkage alarm setting ............................................................................. 21 5.1.5.5. Protected duration setting ..................................................................... 22 5.1.6. Storage ................................................................................................................ 23 5.1.6.1. SD/TF Management ............................................................................ 23 5.1.6.2. SD/TF Capture setting（Timing Snapshot） .................................... 23 5.1.6.3. SD/TF Card Recording Setting ............................................................ 23 5.1.7. Log........................................................................................................................ 24 5.2. Local Setting ................................................................................................................... 25

用户手册 the infrared light in, which make the picture more true;  Lens: Due to focus length of lens is different, so vision angle of lens is different. Please twist the lens for best effect if the video is fuzzy;（each lens of camera is focused well before deliverying, we advise not to adjust the lens )  PTZ: Control PTZ remotely, view video from several vision angle. Some device have PTZ function and some device have not PTZ due to the product cover is different, and PTZ moving angle maybe different;  SD socket：Some product use SD socket and some use MicroSD socket due to the products cover are different, Max support 64GB memory card;  MIC inside：Can collect the sound from camera workplace;  Speaker inside：can play sound from device start, talking and alarm;  Audio in port：If the camera without MIC in it, you can connect extra MIC to collect sound;  Audio out port：If the camera without speaker in it, you can connect extra sound systems;  Alarm in port：Connect with switchable sensor, check sensor signal if high or low to judge if detect any event;  Alarm out Port: Connect with external alarm device, control device alarm action when detect any event;  Reset button: After the camera started, press and hold the reset button for at least 10 seconds, it restores default settings and reboot; press and hold the reset button for 3 seconds to set up the Wi-Fi by using WPS/QSS; press the reset button briefly, the Wi-Fi indicator will flashes for a few seconds while the camera was connecting with Wi-Fi connection, you can assess Wi-Fi signal intensity by the flash frequency, the faster flash, the stronger signal;  Wi-Fi indicator：Blue LED for Wi-Fi indicator that be used to display Wi-Fi work state, such as off, slow flash, fast flash, steady work etc;  Work status indicator:Red LED is operation indicator that displays the state of equipment,there are off, slow flash and flashlights flash, when someone access video,otherwise slow flash;  POE function：The function that supply power to camera through network cable. But you need the camera with POE module. the device connect to POE switcher by a network cable and POE switcher supply power for device through the network cable;  PIR function：The device with PIR sensor, used for detect the human movement, it trigger alarm if detect any abnormal.

用户手册2 Device Connection 2.1. Connection Diagram Figure1 Power on the camera by attaching the power adapter, and then connect the camera and router bynetwork cable, so you can visit the camera via computer in LAN and view camera video as <<3.View video by browser>>You can also connect camera and router by Wi-Fi, you need to configure Wi-Fi of the cameraas<<2.2 Wi-Fi Setting>>.2.2. Wi-Fi Setting You can setting up the Wi-Fi as the following three way. 2.2.1. Configuration via network cable connection Connect the camera and router by network cable as Figure1, please login the camera as <<3.View video by browser>>, access to system configuration interface to finish the setting as<<5.1.2.3 Wi-Fi setting>>.Pull up the network cable, then you can connect the router by Wi-Fi. 2.2.2. WPS/QSS One key configure Wi-Fi Power on the camera and wait for 1 minute, the camera started, hold on reset button 3 seconds, and then click “WPS/QSS” button of the router，the camera and router will be configured Wi-Fi as WPS/QSS protocol, after configuration successfully, the blue Wi-Fi indicator of the camera will quickly flash several times, and then it will be connected to router automatically and the blue indicator will be

用户手册 always on. Notice: Due to some router do not support WPS/QSS function, so you can not use the configuration way. Figure2 2.2.3. Mobile Phone Setting please make sure the smartphone is connected WiFi ,Install the iSmartViewPro App in android phone or iPhone at first, open the App, access to More interface, select “One key configure Wi-Fi” and fill in Wi-Fi password, and then click configure to finish the setting as Figure3. Figure3 Tips:  Before configuration, please power on the camera, after 5 minutes, you can configure the camera (blue Wi-Fi indicator flash slowly),otherwise you can’t configure, and must power on the camera again;  Move mobile phone speaker to camera MIC, click Configure;（please confirm if the camera have MIC, otherwise the configuration will be unsuccessfully)  After configuring successfully, the blue Wi-Fi indicator will flash several times quickly, and then connect to router automatically and the blue indicator is always on. You can click Configure several times when the configuration is unsuccessfully.

用户手册 3 View Video by Browser 3.1. Select View Mode in web Double click to Open the “SearchPro” in the attached CD and click Search as Figure 4. Select the founded device and double click it to open browser automatically, enter user name and password at popup dialog to login camera webpage as Figure5. Tips: default username/password:admin/123456, please modify the password for safety. Figure5  View Video- Mode 1: APNPI view mode(OCX plug-in) For <View Video- Mode 1>,It needs to download plug-in for first time ,as figure 6, click <Download Plug-in> to install it.

用户手册  Google browser version: 42 version or below.  Firefox browser version:43 version or below  Support IE browser IE 8,IE 9,IE 10,IE 11. Figure6  View Video- Mode 2:Flash Player View Mode(Adobe Flash Player plug-in)  If the browser was not installed Flash Player plug-in, there will be tips for downloading and installation.  If select Mode 2,It doesn’t support multi-view, multi-area motion detection functions, etc.  Support Microsoft Edge browser. 3.2. View Live Video  If select“View Video- Mode 1”,It will enter into preview interface as Figure7 Figure7(View Video- Mode 1 preview interface)

用户手册 Note: 1. You can view one or four video in a screen, need to set up the cameras in 5.1.1.5 multiple setting. 2. You can click to zoom in and out the video, 1x, 2x, 3x, 4x optional. 3. The first stream will change to 1920x1080 or 1280x720 automatically according to different camera.  If select“View Video- Mode 2”,It will enter into preview interface as Figure8 Figure 8(View Video- Mode 2 preview interface)  Notice: It doesn’t support manual listening, intercom, capture, recording and multi-view settings. Stop video Play video 1920x1080/1280x720 640x360 320x180 Cruise Horizontally Cruise Vertically Stop Cruise Centre Return to Homepage Stop video Play video Listen Ta l k Snapshot Record Zoom in/out Multiview Show/Hide control panel 1920x1080/1280x720 640x360 320x180 Cruise Horizontally Cruise Vertically Stop Cruise Centre Return to Homepage

用户手册 4 Query and Playback SD Record by Browser 4.1. Playback Video Click Playback Video to access to SD record playback interface, click record date which you want to query ,click Search to list recording file, select one to playback it, also can click download button to download the file as Figure 9. Figure 9 5 Device Configuration and Local Setting 5.1. Device Configuration 5.1.1. System 5.1.1.1. Device Status You can view current user, network connection way, Mac address, SD status and internet IP address of the camera as Figure10.

用户手册 Figure10 5.1.1.2. Time Setting You can do time setting,active “Synchronize with PC”etc.as Figure11.  When IP Camera is connected internet,it will auto adjust NTP server time.  After IP Camera is startup,it will auto adjust the time according to NTP server’s all addresses;after that, it will auto adjust NTP server time per 30 minutes. Figure11 5.1.1.3. Pan&Tilt Setting In Pan/Tilt setting, you can set Pan/Tilt speed, cruise laps(1~10 laps) and whether enable or disable motion detection alarm function when Pan/Tilt works. as Figure12 Call preset: 1. preset 1-8 is the setting place after the camera restart.

用户手册 2. Back to the place which is setted before camera restart: when you call preset NO.9, the camera will be back to the place where power off or restart after finishing self-checking. Figure12 5.1.1.4. Others Setting You can turn off Status LED(Red) and Wi-Fi LED(Blue) of the camera in others setting as Figure13. Figure13 5.1.1.5. Multiple Settings  It supports multi-view under“View Video- Mode 1”，The first device is current camera，You can add 3 more cameras,then you can view one or four cameras in one screen.as Figure14.  If select “View Video-Mode 2”, it will not support multi-view function setting。

用户手册 Figure14 5.1.1.6. System Maintenance The system maintenance includes System setting and Restart timing setting. You can set up reboot, backup setting, restore backup setting, upgrade camera and timing reboot etc as Figure15. Figure15

用户手册 5.1.1.7. Device information You can modify device name and check system firmware version, system firmware time and Web UI firmware here as Figure16. Figure16 5.1.2. Network 5.1.2.1. IP Address Setting You can modify IP address of the camera here, there is no default IP address, it is DHCP.as Figure17. Figure17 5.1.2.2. Port Setting You can change webpage HTTP port here as Figure18. Figure18

用户手册 5.1.2.3. Wi-Fi Setting Click Search and enable Wi-Fi, then select the wireless router you want to connect, enter password of the router, click Save to finish the Wi-Fi configuration. Click Test to check if your settings are successful or not as Figure19. Figure19 5.1.2.4. Port Forwarding Access to port forwarding, you can enable UPNP port forwarding and check the status of it as Figure 20. Figure 20 5.1.2.5. DDNS Setting You can enable manufacturer’s DDNS and set up third party DDNS (the third party DDNS support

用户手册 3322.org/Dyndns.org/No-ip.com now, the manufacturer provide a free DDNS for every camera.as Figure21. Figure21 5.1.2.6. RTSP Setting You can set up RTSP port, also can off RTSP authentication as Figure 22. Figure22 You can view video by some general RTSP stream media software, for example, VLC. The visit link as below： First stream：rtsp://user:password@IP:rtsp port/live/ch0 Second stream：rtsp://User:password@IP:rtsp port/live/ch1 Third stream：rtsp://user:password@IP:rtsp port/live/ch2 5.1.2.7. Onvif Setting Enter into Onvif setting interface, you can enable or disable Onvif authentification.As Figure 23. Figure23

用户手册 5.1.2.8. FTP Setting Access to FTP setting, please fill in relative FTP parameters as the following case to achieve the FTP transfer as Figure24. Figure24 5.1.2.9. SMTP（E-mail）Setting Please fill in relative parameters as the following case to achieve the E-mail transfer, as Figure25. Figure25

用户手册 5.1.3. Audio and Video 5.1.3.1. Video Encoding Setting Access to Video Encoding setting, you can set up AC frequency and video stream as Figure26. AC frequency: 50HZ and 60HZ optional; Video stream: Bit rate (256~4096kbps), frame rate (1~30fps), video encoding control etc; Tips: you can set up the video with audio or not. Figure26 5.1.3.2. Volume Setting Access to Volume setting, you can adjust the volume of MIC and speaker as Figure27. Figure27 5.1.3.3. Image Setting Access to Image Setting, you can flip and mirror the image, also can adjust the brightness, contrast, saturation and hue of image for getting best color effect as Figure28

用户手册 Figure29 5.1.3.4. OSD Setting Access to OSD setting, you can overlay the time and name in Live video as Figure29 Figure29 5.1.3.5. Night vision Settings Access to Night vision Settings, you can set up IR LED and IRCUT as Figure30.

用户手册 Figure30 5.1.4. Security 5.1.4.1 User Setting Access to User management, you can add or edit the user as Figure31. Figure31 Tips: After setting up, click save and refresh button, the entering info will display in the webpage. 5.1.4.2 IP Flitering You can set up the IP filtering to allow or deny some IP address to visit the device as below. As Figure32. In IP Address filter, there are 2 settings: blacklist and whitelist.  Whitelist: it allows the specified IP address to access the camera.  Blacklist:it refuses the specified IP address to access the camera.

用户手册 Figure32 5.1.4.3 Mask Area  “View Video-Mode 1”: the user can hide the specified area not to be monitored, Max.support 4 areas tobe hiden.As Figure33.  “View View-Mode 2”: It doesn’t support privacy setting .

用户手册 Figure33 5.1.5. Alarm 5.1.5.1. IO Detect Access to IO detector, can enable detect function and set up input signal type as Figure34. Figure34 5.1.5.2. Motion Detection  “View Video-Mode 1”：Access to motion detection, you can set up Max 4 detection area, also can set up the sensitivity for every area as Figure35. Figure35

用户手册  “View Video-Mode 2”：User only can set one area for motion detection,and input sensitivity,as Figure36. Figure36 Notice: the higher the sensitivity,the greater the number. 5.1.5.3. Audio Detection Access to audio detection, you can enable audio detection and set up sensitivity of it as Figure36. Figure36 5.1.5.4. Linkage alarm setting You can set up IO detect, motion detection and audio detect, it can linkage to trigger the action: snapshot to Email or FTP server or SD card, recording to FTP server or SD card, and trigger IO output as Figure37.

用户手册 Figure37. Tips: The usage for combination of alarm trigger in alarm trigger type: For example, you enable the audio detection and motion detection, so the camera is enabled combination of alarm trigger, it will perform the action in alarm action setting when the audio detect and motion detection detect any change. 5.1.5.5. Protected duration setting After setting up alarm detect type and alarm trigger linkage, you need to set up protected duration. You must set up it, then the camera perform trigger linkage; the time format is 7 days, 24 hours per day, 15 minutes per a block as Figure38. Figure38

用户手册 5.1.6. Storage 5.1.6.1. SD/TF Management Access to SD/TF management, you can check and download recording and snapshot file in SD/TF card, and check SD/TF card remaining capacity, format SD/TF as Figure39. Figure39 5.1.6.2. SD/TF Capture setting（Timing Snapshot） Access to SD/TF capture, you can enable timing snapshot and set up snapshot time interval and snapshot duration; time format is 7 days, 24 hours per day, 15 minutes per a block as Figure 40. Figure 40 5.1.6.3. SD/TF Card Recording Setting Access to SD Card Recording Setting, you can enable SD recording and set up recording duration

用户手册for every file; time format is as 7 days, 24 hours a day, 15 minutes per a block as Figure 41. Tips: it will overwrite SD/TF recording file automatically by default, also overwrite previous recording file when the SD/TF space is full. Figure 415.1.7. Log Access to Log menu, you can check the user operation log as Figure42. Figure42

$用户手册5.2. Local Setting Access to local configuration, you can set up recording path, snapshot path and recording duration as Figure43. Tips: You must use administrator to run the browse, then recording path and snapshot path can be savesuccessfully at above IE9; the default recording path is D:\HYRec.You can enable to show motion detection frame when viewing video.If select <Video View-Mode 2>, it doesn't support local configuration functionFigure43$

用户手册This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your bodyChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.