Skytech II 5001 Fireplace Remote Controller User Manual Part 1

Skytech II, Inc. Fireplace Remote Controller Part 1

Part 1

5001 Operation description Date:2007-11-14 Author: Javy Huang z LCD Diagram z LCD Indicator: 1. Low Battery: Battery power is low. Replace batteries within two weeks. 2. Radio Frequency Icon: It will be showed if the RF command is transmitting by manual operation. 3. Room Temperature: Indicates CURRENT room temperature. 4. Manual On: It’s button region for operating the system ON. 5. Child Proof: Lock-out operation of the appliance. 6. Manual Off: It’s button region for operating the system OFF. 7. Manual On Flame Icon: Indicates burner/valve in operation. 8. Reserve Flame Icon : Reserved for providing multiple flame modulation levels by providing a variable current output to specific modulation device. z Button Description:
1) Manual On: Press once, unit comes on in System On. The flame icon appears on screen. 2) Manual Off: Press once, unit comes on in System Off. The flame icon disappeared. 3) Child Proof Lockout：To activate the child-proof lockout feature, press and hold and buttons for 10 seconds, “ ＂ will briefly appear on screen. z Operation Description: 1) Low Battery ( ) will appear when battery power has dropped significantly. 2) The RF Icon ( ) will be showed if the RF command is transmitting by manual operation. 3) The room temperature always shows on screen, which range between 32 and 99 Fahrenheit. 4) The On ( ) always shows on screen.
5) The Off ( ) always shows on screen. 6) The Child Proof ( ) will appear on screen if the “Lock-out＂ Feature is activation. 7) The Flame icon ( ) , the main flame indicates burner/valve in operation and additional flame is reserved for specific modulation device. z Further Description 1) Radio Frequency range: 303.8MHZ 2) The remote receiver is SR 1001. 3) The remote controller effective distance is above 40 feet. FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Navigation menu