Silex Technology SX10WAG SX-10WAG User Manual

Silex Technology, Inc. SX-10WAG

Manual 10

Mode / Editing ftp Profiles / FTPMenu Guide 165FTP Menu, Page 2/3Anonymous login: Highlight this option and press the multi selector right to toggle it on (M) or off. Turn this option on for anonymous login, off to enter a user name and password as described below.1Highlight [User ID].2Display text entry dialog.3Enter user name (pg.153).4Return to ftp menu (2/3).$00_WT-4_En.book Page 165 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / FTPMenu Guide1665Highlight [Password].6Display text entry dialog.7Enter password (pg.153).8Return to ftp menu (2/3). Password is disguised as a row of dots.$00_WT-4_En.book Page 166 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / FTPMenu Guide 167FTP Menu, Page 3/3Use proxy server: Highlight this option and press the multi selector right to toggle it on (M) or off. If a proxy server is required for ftp, turn this option on and enter an address and port number as described below.1Highlight [Address].2Display text entry dialog.3Enter proxy server address (pg.153).4Return to ftp menu (3/3).$00_WT-4_En.book Page 167 Friday, August 10, 2007 2:02 PM
Mode / Editing ftp Profiles / FTPMenu Guide1685Highlight [Port].6Enter edit mode.7Press multi selector left or right to select, up or down to change.8Return to ftp menu (3/3).$00_WT-4_En.book Page 168 Friday, August 10, 2007 2:02 PM
169Transfer settings (Transfer Mode Only) / Auto SendMenu GuideTransfer settings (Transfer Mode Only)The following settings are available in transfer mode:Auto SendChoose whether to upload photographs to the server as they are taken.* Pictures will not be uploaded to the server when the WT-4 is turned off. Pictures will instead be marked with a “send” indicator as they are recorded to the memory card.Delete After Send?Select [Yes] to delete photographs from the camera memory card automatically once upload is complete (the default option is [No]). Files uploaded before this option was selected are not affected. File deletion will be paused while the images are displayed in menus such as [Delete], [Hide image], [Copy image(s)] (D3 only), [Slide show], [Print set], [White balance] (preset manual), [Retouch], [Choose slot] (D3 only), [Choose folder] (D300 only), and during magnified display or live view shooting. Deletion will re-commence after quitting these menus.Option DescriptionOnPhotos are uploaded immediately after being recorded to camera memory card. * Be sure memory card is inserted in camera before shooting.Off (default)Photos are not automatically uploaded as they are taken. Photos can be selected for transmission when camera is in playback mode.$00_WT-4_En.book Page 169 Friday, August 10, 2007 2:02 PM
170Transfer settings (Transfer Mode Only) / Send File AsMenu GuideSend File AsWhen uploading NEF + JPEG images to an ftp server, choose whether to send both NEF (RAW) and JPEG files or only the JPEG files.Send FolderAll files in the selected folder (including those already marked as “sent”) will be uploaded, beginning when the folder is selected.Deselect All?Select [Yes] to remove “send,” “sending,” and “sent” marking from all images on the memory card. Upload of any images marked with a “sending” icon will immediately be terminated.Option DescriptionNEF (RAW) + JPEG (default)Upload both NEF (RAW) and JPEG files. JPEG files are sent first.JPEG only Upload JPEG files only.$00_WT-4_En.book Page 170 Friday, August 10, 2007 2:02 PM
171Print (Print Mode Only) / Deselect All?Menu GuidePrint (Print Mode Only)Choose a printer from the profile list. Once a connection has been established, photographs can be printed as described in the camera manual. This option is only available when the WT-4 and computer are connected with a USB cable and the WT-4 is on. ARestrictions to Print Mode•The WT-4 print mode is not compliant with the printing of RAW and TIFF images. To print RAW and TIFF images, first send them to your computer, then print them using the ViewNX software supplied with your camera, or other separately-sold software such as Capture NX. •The Index print function cannot be used. •Pressing the camera's K button will not display the playback screen.$00_WT-4_En.book Page 171 Friday, August 10, 2007 2:02 PM
172Device Info / Battery InfoMenu GuideDevice InfoThis menu displays the following information about the WT-4. This option is only available when the WT-4 and computer are connected with a USB cable and the WT-4 is on.Battery InfoDisplays information on the battery inserted in the WT-4. The [Charging life] display shows battery age; replace [Charging life] reaches [4].MAC AddressShows the MAC address of the WT-4.Firmware VersionDisplays the WT-4 firmware version.DUMMYDUMMY$00_WT-4_En.book Page 172 Friday, August 10, 2007 2:02 PM
173Device Settings / Auto Power OffMenu GuideDevice SettingsFormat the transmitter’s internal memory and choose the delay before the WT-4 turns off automatically. This option is only available when the WT-4 and computer are connected with a USB cable and the WT-4 is on.Auto Power OffSet the time delay until the WT-4 power automatically turns off after the USB connection between the camera and WT-4 is terminated.Format Transmitter’s MemoryFormat transmitter’s memory. All images and voice memos stored in internal memory will be deleted.Option DescriptionOff(default)The WT-4 does not turn off automatically.OnChoose the delay before the WT-4 turns off automatically from 30 seconds, 1 minute, 10 minutes, and 30 minutes. $00_WT-4_En.book Page 173 Friday, August 10, 2007 2:02 PM
174Device Settings / Format Transmitter’s MemoryMenu Guide$00_WT-4_En.book Page 174 Friday, August 10, 2007 2:02 PM
Appendices 175AppendicesCreating ftp Profiles Using Camera MenusIn transfer mode, the camera menus can be used in place of the WT-4 Setup Utility to create ftp profiles. Before creating an ftp profile with the camera menus, set the camera [USB] option to [MTP/PTP] and connect the WT-4. To prevent unexpected loss of power, be sure the battery is fully charged or use an optional AC adapter.1Open the WT-4 USB connector cover and connect the USB cable from the WT-4 to the camera USB connector.2Turn the camera on.DUsing the MenusIf the shutter-release button on the camera is pressed while menus are displayed, the monitor will turn off and any changes to the current profile will be lost.AFirewallsThe WT-4 uses TCP ports 20 and 21 for ftp. It may be necessary to adjust firewall settings before connecting to a server behind a firewall.AEditing Existing ftp ProfilesSee the Menu Guide for information on using camera menus to edit existing ftp profiles.UMMY$00_WT-4_En.book Page 175 Friday, August 10, 2007 2:02 PM
176Creating ftp Profiles Using Camera MenusAppendices3Turn on the WT-4.4Select [Transfer mode] for [Wireless transmitter] > [Mode] (pg.152).5A profile list will be displayed showing the connections available in transfer mode. Highlight [FTP registration] and press the multi selector to the right. Note a new ftp profile can not be created if the camera already contains nine profiles; if necessary, delete a profile using the O button.6The registration dialog shown at right will be displayed. Press 1 or 3 to highlight an option, then press to the right to select. Select [Done] to proceed to Step 5 when settings are complete.Rename: The dialog shown at right will be displayed. Enter a profile name of up to 16 characters as described in “Text Entry” (pg.153) and press the J button to return to the registration dialog.Power switch$00_WT-4_En.book Page 176 Friday, August 10, 2007 2:02 PM
177Creating ftp Profiles Using Camera MenusAppendicesInterface type: The dialog shown at right will be displayed. Highlight one of the following options and press the J button to return to the registration dialog.Wireless: If [Wireless & Ethernet] is selected for [Interface type], select this option to adjust wireless settings as described in the Menu Guide (pp.154–157). Press 4 to return to the registration dialog when settings are complete.TCP/IP: Adjust TCP/IP settings as described in the Menu Guide (pp.158–161). Press 4 to return to the registration dialog when settings are complete.FTP: Adjust ftp settings as described in the Menu Guide (pp.162–168). Press 4 to return to the registration dialog when settings are complete.7A confirmation dialog will be displayed. Choose from the following options:•Yes: Open a connection to the new server and return to the top level of the wireless transmitter menu.•No: Return to Step 3 without connecting to the server.AErrorsAn error will be displayed if the new profile does not match server settings. Edit wireless, TCP/IP, and ftp settings as described in the Menu Guide (pg.153).Option DescriptionWireless & Ethernet (default)Connect via wireless and/or Ethernet.Ethernet only Connect via Ethernet only.$00_WT-4_En.book Page 177 Friday, August 10, 2007 2:02 PM
178TroubleshootingAppendicesTroubleshootingProblem Solution Page“POWER” LED does not light.•Turn the WT-4 on.•Confirm that the battery is inserted and fully charged.pg.71, 82, 91, 103, 141pg.8, 172[Wireless transmitter] option not available.•Select [MTP/PTP] for [USB] option in camera setup menu.•Confirm that the connection between the WT-4 and camera and turn the WT-4 on.pg.7pg.70, 81, 90, 102, 140The [Print], [Device info], and [Device settings] menus cannot be selected.•Confirm that the connection between the WT-4 and camera and turn the WT-4 on.pg.70, 81, 90, 102, 140Excessive radio interference. Change orientation of antenna. —All LEDs blink at once.WT-4 hardware or battery malfunction. Contact a Nikon-authorized service representative.—Camera displays TCP/IP or FTP error.•Check settings for host and/or wireless LAN adapter and adjust camera settings appropriately.•Check firewall settings.pg.54, 65, 123, 134, 153pg.5Camera displays wireless error.•Confirm that host and wireless LAN adapter are on.•Ensure that there are no obstacles between WT-4 and wireless LAN adapter.•Check settings for host and/or wireless LAN adapter and adjust camera settings appropriately.——pg.54, 65, 123, 134, 153Camera displays “Ethernet cable is not connected”.Connect Ethernet cable or change interface setting to [Wireless & Ethernet].pg.51, 62, 121, 131, 177$00_WT-4_En.book Page 178 Friday, August 10, 2007 2:02 PM
179TroubleshootingAppendicesMemory card error displayed.Confirm that memory card is properly inserted. pg.70, 81, 140Error displayed stating that no images are available for printing.Only JPEG images can be printed from the camera. Transfer RAW (NEF) and TIFF images to computer and print them using Capture NX (available separately) or View NX.—Transfer interrupted before all photographs are sent.Transfer will resume if camera is turned off and then on again, exposure meters are reactivated, or WT-4 is turned off and then on again. pg.71, 82, 91, 103, 141The USB cable was detached during transmission.Re-insert the USB cable while the camera is on. —Problem Solution Page$00_WT-4_En.book Page 179 Friday, August 10, 2007 2:02 PM
180GlossaryAppendicesGlossaryAd-hoc: Devices in an ad-hoc wireless network communicate directly (“peer to peer”), without a wireless access point.AES (Advanced Encryption Standard): An encryption standard developed for use by the American government. AES has been praised for combining strong encryption with rapid processing.Auto IP (APIPA—Automatic Private IP Addressing): Allows devices in a network to automatically assign themselves unique IP addresses if no DHCP server is found on the network. Auto IP uses addresses from 169.254.1.0 to 169.254.254.255 and a sub-net mask of 255.255.0.0. These addresses are neither global nor private but are reserved for Auto IP.BSS-ID (Basic Service Set ID): All wireless devices on an ad-hoc wireless network share the same BSS-ID. The BSS-ID may be up to thirty-two characters long and is case sensitive. See also Ad-hoc.Channel: When multiple wireless LANs with different ESS-IDs are operating on a single frequency within a given area, transmission speeds will drop. Specifying a separate channel (frequency) for each network can prevent interference and increase transmission speeds (note that all devices in the same network must be set to the same channel). In the IEEE 802.11a standard, the 5 GHz band is divided into 19 channels, each separated by 20 MHz. In the IEEE 802.11b/g standard, the 2.4 GHz band is divided into 14 channels, each separated by 4 MHz.DHCP (Dynamic Host Configuration Protocol) Server: Each device in a TCP/IP network requires an IP address. If a DHCP server is present on the network, IP addresses will be assigned automatically.DNS (Domain Name Server): A server that contains a database of IP addresses and host names for the machines it administers and that converts host names to IP addresses in response to queries from clients. Each DNS can also query other Domain Name Servers for addresses not listed in its database.ESS-ID (Extended Service Set ID): Multiple BSSs can be configured to form an ESS, allowing users to roam between wireless access points. Only devices with the same ESS-ID as a given access point can communicate with that access point. The ESS-ID may be up to thirty-two characters long and is case sensitive.Ethernet: The name given to the IEEE 802.3 LAN standard. Devices in an Ethernet network are connected via UTP cables for transmission speeds of up to 10 Mbps (10 base-T) or 100 Mbps (100 base-TX).Gateway: A network node that acts as an entrance to another network, for example between a company network and the Internet.$00_WT-4_En.book Page 180 Friday, August 10, 2007 2:02 PM
181GlossaryAppendicesIEEE 802.11a/b/g: A wireless LAN standard determined by the 802 committee which plans LAN technology standards at the IEEE.IIS (Internet Information Services): Microsoft’s name for its Web server software. Notable for its close connection to Windows-based systems through Active Server Pages (ASPs). When installed as part of the operating system, IIS makes it relatively easy to build web a server.Infrastructure: Devices in an infrastructure network communicate via wireless access points that may be connected to an Ethernet network, allowing wireless and Ethernet devices to coexist on a single network.IP address: The address given to each node in a TCP/IP network. All nodes in a TCP/IP network must have a unique IP address. Private IP addresses are recommended for nodes that are part of a local network.Key index: A number identifying which WEP key is to be used for encryption when communicating via an access point with more than one WEP key. All devices on the network must use the same key index.LAN (Local Area Network): A network of computers located in relatively close proximity to one another. LANs generally support data transfer speeds of 10–100 Mbps.MAC (Media Access Control) Address: A unique hardware address for each device on a network, required when sending and receiving packets.Open system: The name given to a wireless network using no authentication (open authentication). Open systems are relatively insecure, as a password is not required to gain access to the server.PASV mode: PASV mode is used by clients behind firewalls, when it allows the ftp server to supply the port number.Private IP address: An IP address that is only visible within a local network. Because packets using a private IP address can not be transmitted to another network, they are usually sent between networks via a proxy server or NAT. Private IP addresses in the range 10.0.0.0–10.255.255.255 are termed “class A.” Class B addresses are in the range 172.16.0.0–172.31.255.255, class C addresses in the range 192.168.0.0–192.168.255.255. The class of address used depends on the size of the network. Class C addresses are often used for small networks.Protocol: A set of rules for passing information back and forth between devices in a network. By defining such elements of communication as how links are established, how receipt of a signal is acknowledged, how data are encoded, and how to handle errors, a protocol ensures that data are transmitted without loss of information.Proxy: A server that stands between large networks and local networks or computers, typically to ensure security. One element of a firewall.$00_WT-4_En.book Page 181 Friday, August 10, 2007 2:02 PM
182GlossaryAppendicesPTP-IP (Picture Transfer Protocol over Internet Protocol): A commonly used name for the CIPA DC-005-2005 image transfer protocol for transmitting images over LANs. It represents an extension to the Picture Transfer Protocol (PTP) used to transfer images between cameras and computers connected via USB cable. The WT-4 uses PTP-IP to communicate with host computers.Shared key: An authentication system in which WEP keys are used to establish whether a client has access to the network. Communication is restricted to devices with the same WEP key.SS-ID (Service Set ID): An SS-ID prevents interference between devices in different networks by allowing communication only between devices that share an SS-ID. See BSS-ID, ESS-ID.Sub-net mask: A mask that divides a network into sub-nets.TCP/IP (Transmission Control Protocol/Internet Protocol): A dual protocol consisting of a transport-layer protocol (TCP) that divides data into packets which it later reassembles, and a network protocol (IP) that handles transmission of the packets between points in the network. It can be implemented on different platforms, allowing data to be transmitted between machines with different operating systems.TKIP (Temporal Key Integrity Protocol): An encryption standard using dynamic WPA-PSK keys that change periodically or after a specified amount of data have been transmitted, making it more secure that WEP, which uses fixed keys.UDP (User Datagram Protocol): A fast but unreliable transport layer transmission protocol using the OSI model.USB (Universal Serial Bus): A standard for connecting peripheral devices. USB supports data transfer rates of up to 480 Mbps (USB 2.0). Devices connected via USB can be connected and disconnected with the power on (“hot plug”) and do not require separate IRQ (interrupt request) numbers, preventing conflicts with other devices.WAN (Wide Area Network): A network connecting computers or LANs in widely separated locations. The Internet is an example of a WAN.WEP (Wired Equivalent Privacy): A type of encryption in which the data transmitted between devices is encoded using a shared encryption key (WEP key).Wireless LAN access point: A wireless transceiver that acts as the connection between wireless devices and a wireless network.WPA-PSK (WiFi Protected Access with Pre-Shared Key): A type of authentication for wireless networks using previously-established (pre-shared) TKIP or AES keys. Wireless devices using this form of authentication can only communicate with devices with the same pre-shared key.$00_WT-4_En.book Page 182 Friday, August 10, 2007 2:02 PM
183SpecificationsAppendicesSpecifications* Maximum logical data rates according to IEEE standard. Actual rates may differ.WirelessStandardsIEEE 802.11a (J52/W52/W53)/b/g (standard wireless LAN protocol), ARIB STD-T66, ARIB STD-T71 (standard for low power data communications systems)CommunicationsprotocolsIEEE 802.11a/g: OFDMIEEE 802.11b: DBPSK, DQPSK, CCKOperating frequency5170–5320 MHz (J52: 4 channels, W52/W53: 8 channels)2412–2472 MHz (13 channels)Range (line of sight)IEEE802.11a: Approximately 260 m (853 ft.) with large antenna at wireless LAN access pointIEEE802.11b/g: Approximately 180 m (590 ft.) with large antenna at wireless LAN access pointData rates * IEEE 802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 MbpsIEEE 802.11b: 1, 2, 5.5, and 11 MbpsSecurity TKIP, AES, 128/64-bit (104/40-bit) WEPAccess protocols Infrastructure/ad-hocEthernetStandards IEEE 802.3u (100 base-TX)/IEEE 802.3 (10 base-T)Data rates 10/100 Mbps with auto detectPort 100 base-TX/10 base-T (AUTO-MDIX)Data transfer protocols PTP-IP, ftpPower consumption 4.5 W maximumPower source Rechargeable EN-EL3e Li-ion battery ×1 (available separately), EH-6 AC adapter (available separately)Operating environment Temperature: 0–40 °C (32–131 °F)Humidity: less than 85% (no condensation)Weight WT-4: 150 g/5.3 oz. (body only)Dimensions (W × H × D) 67 mm × 125 mm × 35 mm(2.6 in. × 4.9 in. × 1.4 in.)$00_WT-4_En.book Page 183 Friday, August 10, 2007 2:02 PM
184SpecificationsAppendicesANumber of Shots Which Can Be Transferred and Operating Time (Battery Life)Reference value: The estimated number of shots which can be transferred and estimated operating time (battery life) using a Li-ion rechargeable battery EN-EL3e (1500mAh).Battery life will differ depending on the charge and usage environment. •Measurements are conducted in accordance with our company's measurement conditions (normal temperature 23°C (73.4 °F)).•Indicated values are derived on the basis of our company's test conditions. These values will vary according to shooting conditions, signal condition, and WT-4 settings. •When image files at an average size of 3 Mbytes per shot are continuously transmitted.•The WT-4 should be configured to transfer mode with the network computer (Windows Vista Ultimate).•The wireless LAN connection method should be set to infrastructure mode.To ensure maximum battery performance:•Keep the battery contacts clean. Soiled contacts can reduce battery performance.•Use batteries immediately after charging. Batteries will lose their charge if left unused.Number of shots during continuous uploadingOperating timeWireless LAN (802.11a) uploading 4,500 shots 150 minutes (2.5 hour)Wireless LAN (802.11g) uploading 4,500 shots 150 minutes (2.5 hour)Ethernet (100BASETx) uploading 10,000 shots 150 minutes (3.2 hour)$00_WT-4_En.book Page 184 Friday, August 10, 2007 2:02 PM
185IndexSymbolsa, b, c76, 147AAC Adapter 9Ad-hoc 15, 16, 25, 37, 48, 119, 154, 180Antenna 2, 3, 8, 178[Auto power off] 9, 173[Auto send] 169B[Battery info] 172BSS-ID 29, 35, 54, 65, 154, 180CCamera Control Pro 2 4, 90, 94Channel 40, 54, 123, 155Connecting the WT-4 70, 81, 90, 102, 140D[Delete after send?] 169[Deselect all?] 170[Device info] 172[Device settings] 173DHCP server 56, 67, 125, 136, 158, 180Domain Name Server (DNS) 56, 67, 125, 136, 161, 180EEncryption 18, 20, 22, 29, 31, 35, 40, 41, 44, 54, 65, 123, 134, 156key 18, 20, 22, 29, 31, 35, 40, 41, 44, 54, 65, 123, 134, 156Errors 178ftp 178TCP/IP 178wireless 178ESS-ID 29, 35, 54, 65, 154, 180Ethernet 2, 4, 5, 51, 62, 121, 131, 177, 180FFile names 78, 146, 149[Firmware Version] 172Folders 50, 61, 75, 87, 113, 116, 126, 137, 163[Format transmitter’s memory] 173[FTP] 162, 177ftp server 108, 126, 137, 162GGateway 125, 136, 160, 180$00_WT-4_En.book Page 185 Friday, August 10, 2007 2:02 PM
186IInfrastructure 15, 20, 31, 41, 59, 129, 154, 181IP address 56, 67, 125, 136, 158, 177, 181M[MAC address] 171Memory cards 70, 81, 102Menus 151–173, 175–177entering text in 153[Mode] 4, 71, 81, 91, 102, 152Ppassword 50, 61PASV mode 126, 137, 164, 181PC mode 4, 90Port 5, 112, 116, 126, 137, 163, 175Print mode 4, 97Printing 4, 102, 171Proxy 126, 137, 167, 181PTP-IP 182, 183S[Send file as] 170[Send folder] 170SS-ID 29, 35, 54, 65, 154, 182Status LEDs 2, 3, 77, 88, 95, 104T[TCP/IP] 158, 177TCP/IP 56, 67, 125, 136, 158, 177, 182Thumbnail select mode 4, 79Transfer mode 4, 70, 176UUpload 70, 74, 145deleting images after 169Interrupting 75, 146selecting images for 74, 145[USB] 7User ID 126, 137, 165W[Wireless] 154, 177Wireless LAN 15access point 15, 20, 31, 41, 154, 182[Wireless transmitter] 151WT-4 Setup Utility 10, 48, 97, 119$00_WT-4_En.book Page 186 Friday, August 10, 2007 2:02 PM

Navigation menu